| /openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
| H A D | marvell,kirkwood-pinctrl.txt | 28 mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk)
29 mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig)
32 mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk),
34 mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq),
36 mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig)
37 mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq),
42 mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd)
43 mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs)
66 mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk)
67 mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act)
[all …]
|
| H A D | marvell,armada-370-pinctrl.txt | 16 mpp0 0 gpio, uart0(rxd)
17 mpp1 1 gpo, uart0(txd)
18 mpp2 2 gpio, i2c0(sck), uart0(txd)
19 mpp3 3 gpio, i2c0(sda), uart0(rxd)
24 mpp8 8 gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk)
26 mpp10 10 gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi)
43 mpp22 22 gpo, ge0(txd6), ge1(txd2), uart0(rts)
48 mpp27 27 gpio, ge0(rxd4), ge1(rxd2), uart0(cts)
59 mpp38 38 gpio, dev(ready), uart1(cts), uart0(cts)
61 mpp40 40 gpio, dev(ad1), uart1(rts), uart0(rts)
[all …]
|
| H A D | img,pistachio-pinctrl.txt | 108 mfio55 uart0, spim0, spim1
109 mfio56 uart0, spim0, spim1
110 mfio57 uart0, spim0, spim1
111 mfio58 uart0, spim1
183 uart0_xfer: uart0-xfer {
184 uart0-rxd {
186 function = "uart0";
188 uart0-txd {
190 function = "uart0";
194 uart0_rts_cts: uart0-rts-cts {
[all …]
|
| H A D | berlin,pinctrl.txt | 38 uart0_pmux: uart0-pmux {
40 function = "uart0";
44 &uart0 {
|
| H A D | nxp,lpc1850-scu.txt | 47 uart0_pins: uart0-pins {
50 function = "uart0";
57 function = "uart0";
|
| H A D | mediatek,mt76x8-pinctrl.yaml | 42 spi, spi cs1, spis, sw_r, uart0, uart1, uart2, utif, wdt,
83 spi cs1, spis, uart0, uart1, uart2, wdt, wled_an,
361 const: uart0
365 enum: [uart0]
429 enum: [i2c, spi cs1, uart0]
|
| H A D | axis,artpec6-pinctrl.txt | 37 uart0: uart0grp0, uart0grp1, uart0grp2
60 function = "uart0";
70 uart0: uart@f8036000 {
|
| /openbmc/linux/Documentation/devicetree/bindings/arm/marvell/ |
| H A D | cp110-system-controller.txt | 91 mpp0 0 gpio, dev(ale1), au(i2smclk), ge0(rxd3), tdm(pclk), ptp(pulse), mss_i2c(sda), uart0(rxd), sa…
92 mpp1 1 gpio, dev(ale0), au(i2sdo_spdifo), ge0(rxd2), tdm(drx), ptp(clk), mss_i2c(sck), uart0(txd), …
97 …1), ge0(txd3), spi0(csn2), au(i2sextclk), sata1(present_act), pcie2(clkreq), uart0(rxd), ptp(pulse)
98 mpp7 7 gpio, dev(ad10), ge0(txd2), spi0(csn1), spi1(csn1), sata0(present_act), led(data), uart0(txd…
99 mpp8 8 gpio, dev(ad9), ge0(txd1), spi0(csn0), spi1(csn0), uart0(cts), led(stb), uart2(rxd), ptp(pcl…
101 mpp10 10 gpio, dev(readyn), ge0(txctl), spi0(miso), spi1(miso), uart0(cts), sata1(present_act)
102 mpp11 11 gpio, dev(wen1), ge0(txclkout), spi0(clk), spi1(clk), uart0(rts), led(clk), uart2(txd), sa…
118 …i1(miso), mss_gpio4, ge0(rxd3), spi0(csn4), ge(mdio), sata0(present_act), uart0(rts), rei(in_cp2cp)
119 …e0(rxd2), spi0(csn5), pcie2(clkreq), ptp(pulse), ge(mdc), sata1(present_act), uart0(cts), led(data)
120 …(rxd1), spi0(csn6), pcie1(clkreq), ptp(clk), mss_i2c(sda), sata0(present_act), uart0(rxd), led(stb)
[all …]
|
| /openbmc/linux/drivers/pinctrl/mvebu/ |
| H A D | pinctrl-armada-370.c | 23 MPP_FUNCTION(0x1, "uart0", "rxd")),
26 MPP_FUNCTION(0x1, "uart0", "txd")),
30 MPP_FUNCTION(0x2, "uart0", "txd")),
34 MPP_FUNCTION(0x2, "uart0", "rxd")),
58 MPP_FUNCTION(0x2, "uart0", "rts"),
70 MPP_FUNCTION(0x2, "uart0", "cts"),
139 MPP_FUNCTION(0x4, "uart0", "rts")),
164 MPP_FUNCTION(0x4, "uart0", "cts")),
210 MPP_FUNCTION(0x3, "uart0", "cts")),
219 MPP_FUNCTION(0x3, "uart0", "rts")),
[all …]
|
| H A D | pinctrl-armada-cp110.c | 49 MPP_FUNCTION(8, "uart0", "rxd"),
60 MPP_FUNCTION(8, "uart0", "txd"),
117 MPP_FUNCTION(8, "uart0", "rxd"),
127 MPP_FUNCTION(8, "uart0", "txd"),
135 MPP_FUNCTION(6, "uart0", "cts"),
154 MPP_FUNCTION(6, "uart0", "cts"),
162 MPP_FUNCTION(6, "uart0", "rts"),
255 MPP_FUNCTION(10, "uart0", "rts"),
268 MPP_FUNCTION(10, "uart0", "cts"),
281 MPP_FUNCTION(10, "uart0", "rxd"),
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | hi6220-hikey.dts | 20 serial0 = &uart0; /* On board UART0 */
22 serial2 = &uart2; /* LS Expansion UART0 */
55 label = "LS-UART0";
|
| H A D | sama5d3_uart.dtsi | 16 serial5 = &uart0;
23 uart0 {
24 pinctrl_uart0: uart0-0 {
56 uart0: serial@f0024000 { label
|
| H A D | mt7629-rfb.dts | 20 stdout-path = &uart0;
44 uart0_pins: uart0-default {
71 &uart0 {
|
| /openbmc/linux/arch/arm/ |
| H A D | Kconfig.debug | 132 bool "Kernel low-level debugging messages via Alpine UART0"
149 0x80000000 | 0xf0000000 | UART0
520 bool "Kernel low-level debugging on KEYSTONE2 using UART0"
525 their output to UART0 serial port on KEYSTONE2 devices.
536 bool "Kernel low-level debugging via LPC18xx/43xx UART0"
541 on NXP LPC18xx/43xx UART0.
575 bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
581 on MVEBU based platforms on UART0.
599 bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
604 on MVEBU based platforms on UART0. (Armada XP, Armada 3xx,
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/sifive/ |
| H A D | sifive-blocks-ip-versioning.txt | 12 An example is "sifive,uart0" from:
23 "sifive,uart0" to indicate that their driver is compatible with the
33 IP block-specific compatible string (such as "sifive,uart0") should
38 compatible = "sifive,fu540-c000-uart", "sifive,uart0";
|
| /openbmc/linux/arch/arm/boot/dts/microchip/ |
| H A D | sama5d3_uart.dtsi | 16 serial5 = &uart0;
23 uart0 {
24 pinctrl_uart0: uart0-0 {
40 uart0: serial@f0024000 { label
|
| /openbmc/linux/arch/arm/boot/dts/allwinner/ |
| H A D | sun8i-r16-nintendo-nes-classic.dts | 14 serial0 = &uart0;
22 &uart0 {
24 * UART0 is available on two ports: PB and PF, both are accessible.
|
| /openbmc/linux/arch/powerpc/boot/ |
| H A D | 4xx.c | 335 u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; in ibm440gp_fixup_clocks() local
366 uart0 = ser_clk; in ibm440gp_fixup_clocks()
369 uart0 = plb / CPC0_CR0_UDIV(cr0); in ibm440gp_fixup_clocks()
386 dt_fixup_clock("/plb/opb/serial@40000200", uart0); in ibm440gp_fixup_clocks()
554 u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; in ibm405gp_fixup_clocks() local
596 /* uart0 uses the external clock */ in ibm405gp_fixup_clocks()
597 uart0 = ser_clk; in ibm405gp_fixup_clocks()
599 uart0 = cpu / udiv; in ibm405gp_fixup_clocks()
616 dt_fixup_clock("/plb/opb/serial@ef600300", uart0); in ibm405gp_fixup_clocks()
626 u32 cpu, plb, opb, ebc, uart0, uart1; in ibm405ep_fixup_clocks() local
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/broadcom/ |
| H A D | bcm283x.dtsi | 25 serial0 = &uart0;
246 uart0_gpio14: uart0-gpio14 {
252 * people often run uart0 on the two pins
255 uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
259 uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
264 uart0_gpio32: uart0-gpio32 {
269 uart0_gpio36: uart0-gpio36 {
273 uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
304 uart0: serial@7e201000 { label
|
| /openbmc/linux/arch/arm/boot/dts/hisilicon/ |
| H A D | sd5203.dts | 22 serial0 = &uart0;
76 uart0: serial@1600d000 { label
79 bus_id = "uart0";
|
| /openbmc/u-boot/arch/mips/dts/ |
| H A D | gardena-smart-gateway-mt7688.dts | 16 serial0 = &uart0;
84 stdout-path = &uart0;
88 &uart0 {
|
| /openbmc/linux/arch/mips/boot/dts/brcm/ |
| H A D | bcm3384_viper.dtsi | 46 uart0 = &uart0;
81 uart0: serial@14e00520 { label
|
| H A D | bcm93384wvg.dts | 12 stdout-path = &uart0;
16 &uart0 {
|
| H A D | bcm93384wvg_viper.dts | 12 stdout-path = &uart0;
16 &uart0 {
|
| H A D | bcm6362-neufbox6-sercomm.dts | 17 stdout-path = &uart0;
21 &uart0 {
|