| /openbmc/linux/drivers/mfd/ |
| H A D | tps65090.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Core driver for TI TPS65090 PMIC family
18 #include <linux/mfd/tps65090.h>
50 CHARGER = 1, enumerator
55 .name = "tps65090-pmic",
57 [CHARGER] = {
58 .name = "tps65090-charger",
61 .of_compatible = "ti,tps65090-charger",
124 .name = "tps65090",
160 { .compatible = "ti,tps65090",},
[all …]
|
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
45 tristate "Active-semi ACT8945A"
50 Support for the ACT8945A PMIC from Active-semi. This device
51 features three step-down DC/DC converters and four low-dropout
53 charger.
67 sun4i-gpadc-iio and the hwmon driver iio_hwmon.
70 called sun4i-gpadc.
101 tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
132 over at91-usart-serial driver and usart-spi-driver. Only one function
148 tristate "Atmel HLCDC (High-end LCD Controller)"
[all …]
|
| /openbmc/u-boot/doc/device-tree-bindings/power/ |
| H A D | tps65090.txt | 1 TPS65090 Frontend PMU with Switchmode Charger
4 -compatible: "ti,tps65090-charger"
7 -ti,enable-low-current-chrg: Enables charging when a low current is detected
10 This node is a subnode of the tps65090 PMIC.
14 tps65090-charger {
15 compatible = "ti,tps65090-charger";
16 ti,enable-low-current-chrg;
|
| /openbmc/linux/Documentation/devicetree/bindings/power/supply/ |
| H A D | tps65090-charger.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: TPS65090 Frontend PMU with Switchmode Charger
10 - Sebastian Reichel <sre@kernel.org>
13 - $ref: power-supply.yaml#
17 const: ti,tps65090-charger
19 ti,enable-low-current-chrg:
25 - compatible
[all …]
|
| /openbmc/linux/drivers/power/supply/ |
| H A D | tps65090-charger.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Battery charger driver for TI's tps65090
21 #include <linux/mfd/tps65090.h>
44 static int tps65090_low_chrg_current(struct tps65090_charger *charger) in tps65090_low_chrg_current() argument
48 if (charger->passive_mode) in tps65090_low_chrg_current()
51 ret = tps65090_write(charger->dev->parent, TPS65090_REG_CG_CTRL5, in tps65090_low_chrg_current()
54 dev_err(charger->dev, "%s(): error reading in register 0x%x\n", in tps65090_low_chrg_current()
61 static int tps65090_enable_charging(struct tps65090_charger *charger) in tps65090_enable_charging() argument
66 if (charger->passive_mode) in tps65090_enable_charging()
69 ret = tps65090_read(charger->dev->parent, TPS65090_REG_CG_CTRL0, in tps65090_enable_charging()
[all …]
|
| H A D | Makefile | 1 # SPDX-License-Identifier: GPL-2.0
2 subdir-ccflags-$(CONFIG_POWER_SUPPLY_DEBUG) := -DDEBUG
4 power_supply-y := power_supply_core.o
5 power_supply-$(CONFIG_SYSFS) += power_supply_sysfs.o
6 power_supply-$(CONFIG_LEDS_TRIGGERS) += power_supply_leds.o
8 obj-$(CONFIG_POWER_SUPPLY) += power_supply.o
9 obj-$(CONFIG_POWER_SUPPLY_HWMON) += power_supply_hwmon.o
10 obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o
12 obj-$(CONFIG_APM_POWER) += apm_power.o
13 obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o
[all …]
|
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
51 which include a battery charger and a boost converter.
54 tristate "MAX8925 battery charger support"
57 Say Y here to enable support for the battery charger in the Maxim
61 tristate "WM831X backup battery charger support"
64 Say Y here to enable support for the backup battery charger
93 tristate "ADP5061 battery charger driver"
98 charger.
104 tristate "Active-semi ACT8945A charger driver"
108 Active-semi ActivePath ACT8945A charger.
[all …]
|
| /openbmc/u-boot/board/nvidia/dalmore/ |
| H A D | dalmore.c | 1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
10 #include "pinmux-config-dalmore.h"
13 #define BAT_I2C_ADDRESS 0x48 /* TPS65090 charger */
31 /* Initialize any non-default pad configs (APB_MISC_GP regs) */ in pinmux_init()
59 printf("%s: PMU i2c_write %02X<-%02X returned %d\n", in board_sdmmc_voltage_init()
68 printf("%s: PMU i2c_write %02X<-%02X returned %d\n", in board_sdmmc_voltage_init()
71 /* TPS65090: FET6_CTRL = enable output auto discharge, enable FET6 */ in board_sdmmc_voltage_init()
77 debug("%s: Cannot find charger I2C chip\n", __func__); in board_sdmmc_voltage_init()
82 printf("%s: BAT i2c_write %02X<-%02X returned %d\n", in board_sdmmc_voltage_init()
[all …]
|
| /openbmc/u-boot/drivers/power/pmic/ |
| H A D | Kconfig | 4 ---help---
5 This config enables the driver-model PMIC support.
6 UCLASS_PMIC - designed to provide an I/O interface for PMIC devices.
7 For the multi-function PMIC devices, this can be used as parent I/O
10 - 'drivers/power/pmic/pmic-uclass.c'
11 - 'include/power/pmic.h'
17 ---help---
21 U-Boot proper.
27 ---help---
35 bool "Enable support for the active-semi 8846 PMIC"
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | exynos5800-peach-pi.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * SAMSUNG/GOOGLE Peach-Pit board device tree source
9 /dts-v1/;
14 cpu-model = "Exynos5800";
16 compatible = "google,pit-rev#", "google,pit",
20 google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
21 hwid = "PIT TEST A-A 7848";
22 lazy-init = <1>;
33 compatible = "pwm-backlight";
35 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
[all …]
|
| H A D | exynos5420-peach-pit.dts | 1 // SPDX-License-Identifier: GPL-2.0+
3 * SAMSUNG/GOOGLE Peach-Pit board device tree source
9 /dts-v1/;
11 #include <dt-bindings/clock/maxim,max77802.h>
12 #include <dt-bindings/regulator/maxim,max77802.h>
17 compatible = "google,pit-rev#", "google,pit",
21 google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
22 hwid = "PIT TEST A-A 7848";
23 lazy-init = <1>;
34 compatible = "pwm-backlight";
[all …]
|
| H A D | exynos5250-snow.dts | 12 /dts-v1/;
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/interrupt-controller/irq.h>
15 #include <dt-bindings/input/input.h>
51 stdout-path = "serial3:115200n8";
59 samsung,bl1-offset = <0x1400>;
60 samsung,bl2-offset = <0x3400>;
61 u-boot-memory = "/memory";
62 u-boot-offset = <0x3e00000 0x100000>;
67 #address-cells = <1>;
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/samsung/ |
| H A D | exynos5250-snow-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/clock/maxim,max77686.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/sound/samsung-i2s.h>
30 stdout-path = "serial3:115200n8";
33 gpio-keys {
34 compatible = "gpio-keys";
35 pinctrl-names = "default";
[all …]
|
| H A D | exynos5420-peach-pit.dts | 1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/clock/maxim,max77802.h>
13 #include <dt-bindings/regulator/maxim,max77802.h>
14 #include <dt-bindings/sound/samsung-i2s.h>
16 #include "exynos5420-cpus.dtsi"
21 compatible = "google,pit-rev16",
[all …]
|
| H A D | exynos5800-peach-pi.dts | 1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/clock/maxim,max77802.h>
13 #include <dt-bindings/regulator/maxim,max77802.h>
14 #include <dt-bindings/sound/samsung-i2s.h>
16 #include "exynos5420-cpus.dtsi"
21 compatible = "google,pi-rev16",
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/nvidia/ |
| H A D | tegra114-dalmore.dts | 1 // SPDX-License-Identifier: GPL-2.0
7 /dts-v1/;
9 #include <dt-bindings/input/input.h>
23 stdout-path = "serial0:115200n8";
34 hdmi-supply = <&vdd_5v0_hdmi>;
35 vdd-supply = <&vdd_hdmi_reg>;
36 pll-supply = <&palmas_smps3_reg>;
38 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
39 nvidia,hpd-gpio =
46 avdd-dsi-csi-supply = <&avdd_1v2_reg>;
[all …]
|
| /openbmc/linux/drivers/regulator/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
38 managed regulators and simple non-configurable regulators.
65 They provide two I2C-controlled DC/DC step-down converters with
85 tristate "Active-semi act8865 voltage regulator"
90 This driver controls a active-semi act8865 voltage output
94 tristate "Active-semi ACT8945A voltage regulator"
97 This driver controls a active-semi ACT8945A voltage regulator
98 via I2C bus. The ACT8945A features three step-down DC/DC converters
99 and four low-dropout linear regulators, along with a ActivePath
100 battery charger.
[all …]
|
| /openbmc/linux/ |
| H A D | opengrok1.0.log | 1 2024-12-28 20:07:11.902-0600 FINER t583 IndexDatabase.createAnnotationCache: failed to create annotation: repository {dir='/opengrok/src/openbmc/linux',type=git,historyCache=on,renamed=false,merge=true,annotationCache=off} does not allow to create annotation cache for '/opengrok/src/openbmc/linux/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c'
2 2024-12-28 20:07:11.913-0600 FINEST t583 Statistics.logIt: Added: '/openbmc/linux/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c' (CAnalyzer) (took 116 ms)
3 2024-12-28 20:07:11.899-0600 FINER t593 IndexDatabase.createAnnotationCache: failed to create annotation: repository {dir='/opengrok/src/openbmc/linux',type=git,historyCache=on,renamed=false,merge=true,annotationCache=off} does not allow to create annotation cache for '/opengrok/src/openbmc/linux/tools/testing/selftests/powerpc/tm/tm-signa
[all...] |
| H A D | opengrok2.0.log | 1 2024-12-28 20:05:26.116-0600 FINEST t586 Statistics.logIt: Added: '/openbmc/linux/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh' (ShAnalyzer) (took 79 ms)
2 2024-12-28 20:05:26.112-0600 FINER t592 IndexDatabase.createAnnotationCache: failed to create annotation: repository {dir='/opengrok/src/openbmc/qemu',type=git,historyCache=on,renamed=false,merge=true,annotationCache=off} does not allow to create annotation cache for '/opengrok/src/openbmc/qemu/chardev/spice.c'
3 2024-12-28 20:05:26.116-0600 FINEST t592 Statistics.logIt: Added: '/openbmc/qemu/chardev/spice.c' (CAnalyzer) (took 33 ms)
4 2024-1
[all...] |
| H A D | opengrok0.0.log | 1 2024-12-28 20:09:05.996-0600 FINEST t1171 PendingFileCompleter.doRename: Moved pending as file: '/opengrok/data/xref/openbmc/linux/drivers/staging/media/av7110/video-continue.rst.gz'
2 2024-12-28 20:09:05.942-0600 FINEST t1149 PendingFileCompleter.doRename: Moved pending as file: '/opengrok/data/xref/openbmc/u-boot/arch/sh/config.mk.gz'
3 2024-12-2
[all...] |