| /openbmc/linux/Documentation/devicetree/bindings/clock/ |
| H A D | allwinner,sun7i-a20-gmac-clk.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/clock/allwinner,sun7i-a20-gmac-clk.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner A20 GMAC TX Clock
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#clock-cells":
18 const: allwinner,sun7i-a20-gmac-clk
29 clock-output-names:
[all …]
|
| /openbmc/u-boot/doc/device-tree-bindings/net/ |
| H A D | allwinner,sun7i-a20-gmac.txt | 1 * Allwinner GMAC ethernet controller
7 - compatible: Should be "allwinner,sun7i-a20-gmac"
8 - clocks: Should contain the GMAC main clock, and tx clock
9 The tx clock type should be "allwinner,sun7i-a20-gmac-clk"
10 - clock-names: Should contain the clock names "stmmaceth",
14 - phy-supply: phandle to a regulator if the PHY needs one
18 gmac: ethernet@01c50000 {
19 compatible = "allwinner,sun7i-a20-gmac";
23 interrupt-names = "macirq";
25 clock-names = "stmmaceth", "allwinner_gmac_tx";
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/allwinner/ |
| H A D | sun7i-a20.dtsi | 4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
45 #include <dt-bindings/interrupt-controller/arm-gic.h>
46 #include <dt-bindings/thermal/thermal.h>
47 #include <dt-bindings/dma/sun4i-a10.h>
48 #include <dt-bindings/clock/sun7i-a20-ccu.h>
49 #include <dt-bindings/reset/sun4i-a10-ccu.h>
50 #include <dt-bindings/pinctrl/sun4i-a10.h>
53 interrupt-parent = <&gic>;
54 #address-cells = <1>;
[all …]
|
| H A D | sun6i-a31.dtsi | 4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
45 #include <dt-bindings/interrupt-controller/arm-gic.h>
46 #include <dt-bindings/thermal/thermal.h>
48 #include <dt-bindings/clock/sun6i-a31-ccu.h>
49 #include <dt-bindings/clock/sun6i-rtc.h>
50 #include <dt-bindings/reset/sun6i-a31-ccu.h>
53 interrupt-parent = <&gic>;
54 #address-cells = <1>;
55 #size-cells = <1>;
[all …]
|
| H A D | sun7i-a20-bananapi.dts | 6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun7i-a20.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
54 compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
63 stdout-path = "serial0:115200n8";
66 hdmi-connector {
67 compatible = "hdmi-connector";
[all …]
|
| H A D | sun9i-a80.dtsi | 2 * Copyright 2014 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
45 #include <dt-bindings/interrupt-controller/arm-gic.h>
47 #include <dt-bindings/clock/sun9i-a80-ccu.h>
48 #include <dt-bindings/clock/sun9i-a80-de.h>
49 #include <dt-bindings/clock/sun9i-a80-usb.h>
50 #include <dt-bindings/reset/sun9i-a80-ccu.h>
51 #include <dt-bindings/reset/sun9i-a80-de.h>
52 #include <dt-bindings/reset/sun9i-a80-usb.h>
[all …]
|
| H A D | sun8i-r40.dtsi | 2 * Copyright 2017 Chen-Yu Tsai <wens@csie.org>
5 * This file is dual-licensed: you can use it either under the terms
44 #include <dt-bindings/interrupt-controller/arm-gic.h>
45 #include <dt-bindings/clock/sun6i-rtc.h>
46 #include <dt-bindings/clock/sun8i-de2.h>
47 #include <dt-bindings/clock/sun8i-r40-ccu.h>
48 #include <dt-bindings/clock/sun8i-tcon-top.h>
49 #include <dt-bindings/reset/sun8i-r40-ccu.h>
50 #include <dt-bindings/reset/sun8i-de2.h>
51 #include <dt-bindings/thermal/thermal.h>
[all …]
|
| H A D | sun8i-a83t.dtsi | 6 * This file is dual-licensed: you can use it either under the terms
45 #include <dt-bindings/interrupt-controller/arm-gic.h>
47 #include <dt-bindings/clock/sun8i-a83t-ccu.h>
48 #include <dt-bindings/clock/sun8i-de2.h>
49 #include <dt-bindings/clock/sun8i-r-ccu.h>
50 #include <dt-bindings/reset/sun8i-a83t-ccu.h>
51 #include <dt-bindings/reset/sun8i-de2.h>
52 #include <dt-bindings/reset/sun8i-r-ccu.h>
53 #include <dt-bindings/thermal/thermal.h>
56 interrupt-parent = <&gic>;
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | sun7i-a20.dtsi | 4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
47 #include <dt-bindings/interrupt-controller/arm-gic.h>
48 #include <dt-bindings/thermal/thermal.h>
49 #include <dt-bindings/dma/sun4i-a10.h>
50 #include <dt-bindings/clock/sun7i-a20-ccu.h>
51 #include <dt-bindings/reset/sun4i-a10-ccu.h>
54 interrupt-parent = <&gic>;
57 ethernet0 = &gmac;
61 #address-cells = <1>;
[all …]
|
| H A D | sun7i-a20-bananapi.dts | 6 * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun7i-a20.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
54 compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
63 stdout-path = "serial0:115200n8";
66 hdmi-connector {
67 compatible = "hdmi-connector";
[all …]
|
| H A D | sun6i-a31.dtsi | 4 * Maxime Ripard <maxime.ripard@free-electrons.com>
6 * This file is dual-licensed: you can use it either under the terms
47 #include <dt-bindings/interrupt-controller/arm-gic.h>
48 #include <dt-bindings/thermal/thermal.h>
50 #include <dt-bindings/clock/sun6i-a31-ccu.h>
51 #include <dt-bindings/reset/sun6i-a31-ccu.h>
54 interrupt-parent = <&gic>;
57 ethernet0 = &gmac;
61 #address-cells = <1>;
62 #size-cells = <1>;
[all …]
|
| H A D | sun8i-a83t.dtsi | 6 * This file is dual-licensed: you can use it either under the terms
45 #include <dt-bindings/interrupt-controller/arm-gic.h>
47 #include <dt-bindings/clock/sun8i-a83t-ccu.h>
48 #include <dt-bindings/clock/sun8i-de2.h>
49 #include <dt-bindings/clock/sun8i-r-ccu.h>
50 #include <dt-bindings/reset/sun8i-a83t-ccu.h>
51 #include <dt-bindings/reset/sun8i-de2.h>
52 #include <dt-bindings/reset/sun8i-r-ccu.h>
55 interrupt-parent = <&gic>;
56 #address-cells = <1>;
[all …]
|
| /openbmc/linux/drivers/clk/sunxi/ |
| H A D | clk-a20-gmac.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
6 * Copyright 2013 Chen-Yu Tsai
7 * Chen-Yu Tsai <wens@csie.org>
10 #include <linux/clk-provider.h>
19 * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module
23 * MII TX clock from PHY >-----|___________ _________|----> to GMAC core
24 * GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY
25 * Ext. 125MHz RGMII TX clk >--|__divider__/ |
28 * The external 125 MHz reference is optional, i.e. GMAC can use its
29 * internal TX clock just fine. The A31 GMAC clock module does not have
[all …]
|
| /openbmc/linux/drivers/net/ethernet/stmicro/stmmac/ |
| H A D | dwmac-sunxi.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * dwmac-sunxi.c - Allwinner sunxi DWMAC specific glue layer
5 * Copyright (C) 2013 Chen-Yu Tsai
7 * Chen-Yu Tsai <wens@csie.org>
11 #include <linux/clk.h>
23 struct clk *tx_clk;
32 struct sunxi_priv_data *gmac = priv; in sun7i_gmac_init() local
35 if (gmac->regulator) { in sun7i_gmac_init()
36 ret = regulator_enable(gmac->regulator); in sun7i_gmac_init()
41 /* Set GMAC interface port mode in sun7i_gmac_init()
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/net/ |
| H A D | snps,dwmac.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Alexandre Torgue <alexandre.torgue@foss.st.com>
11 - Giuseppe Cavallaro <peppe.cavallaro@st.com>
12 - Jose Abreu <joabreu@synopsys.com>
23 - snps,dwmac
24 - snps,dwmac-3.40a
25 - snps,dwmac-3.50a
26 - snps,dwmac-3.610
[all …]
|
| /openbmc/linux/drivers/pinctrl/sunxi/ |
| H A D | pinctrl-sun4i-a10.c | 6 * Maxime Ripard <maxime.ripard@free-electrons.com>
18 #include "pinctrl-sunxi.h"
27 SUNXI_FUNCTION_VARIANT(0x5, "gmac", /* GRXD3 */
34 SUNXI_FUNCTION(0x3, "spi1"), /* CLK */
36 SUNXI_FUNCTION_VARIANT(0x5, "gmac", /* GRXD2 */
45 SUNXI_FUNCTION_VARIANT(0x5, "gmac", /* GRXD1 */
54 SUNXI_FUNCTION_VARIANT(0x5, "gmac", /* GRXD0 */
62 SUNXI_FUNCTION_VARIANT(0x5, "gmac", /* GTXD3 */
70 SUNXI_FUNCTION_VARIANT(0x5, "gmac", /* GTXD2 */
77 SUNXI_FUNCTION(0x3, "spi3"), /* CLK */
[all …]
|
| /openbmc/u-boot/drivers/net/ |
| H A D | designware.c | 1 // SPDX-License-Identifier: GPL-2.0+
8 * Designware ethernet IP driver for U-Boot
12 #include <clk.h>
29 struct dw_eth_dev *priv = dev_get_priv((struct udevice *)bus->priv); in dw_mdio_read()
30 struct eth_mac_regs *mac_p = priv->mac_regs_p; in dw_mdio_read()
32 struct eth_mac_regs *mac_p = bus->priv; in dw_mdio_read()
41 writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); in dw_mdio_read()
45 if (!(readl(&mac_p->miiaddr) & MII_BUSY)) in dw_mdio_read()
46 return readl(&mac_p->miidata); in dw_mdio_read()
50 return -ETIMEDOUT; in dw_mdio_read()
[all …]
|
| /openbmc/linux/drivers/clk/sunxi-ng/ |
| H A D | ccu-sun4i-a10.c | 1 // SPDX-License-Identifier: GPL-2.0-only
8 #include <linux/clk-provider.h>
28 #include "ccu-sun4i-a10.h"
38 .hw.init = CLK_HW_INIT("pll-core",
50 * With sigma-delta modulation for fractional-N on the audio PLL,
73 .hw.init = CLK_HW_INIT("pll-audio-base",
91 .hw.init = CLK_HW_INIT("pll-video0",
106 .hw.init = CLK_HW_INIT("pll-ve",
119 .hw.init = CLK_HW_INIT("pll-ve",
132 .hw.init = CLK_HW_INIT("pll-ddr-base",
[all …]
|
| /openbmc/linux/ |
| H A D | opengrok0.0.log | 1 2024-12-28 20:09:05.996-0600 FINEST t1171 PendingFileCompleter.doRename: Moved pending as file: '/opengrok/data/xref/openbmc/linux/drivers/staging/media/av7110/video-continue.rst.gz'
2 2024-12-28 20:09:05.942-0600 FINEST t1149 PendingFileCompleter.doRename: Moved pending as file: '/opengrok/data/xref/openbmc/u-boot/arch/sh/config.mk.gz'
3 2024-12-2
[all...] |
| H A D | opengrok1.0.log | 1 2024-12-28 20:07:11.902-0600 FINER t583 IndexDatabase.createAnnotationCache: failed to create annotation: repository {dir='/opengrok/src/openbmc/linux',type=git,historyCache=on,renamed=false,merge=true,annotationCache=off} does not allow to create annotation cache for '/opengrok/src/openbmc/linux/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c'
2 2024-12-28 20:07:11.913-0600 FINEST t583 Statistics.logIt: Added: '/openbmc/linux/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c' (CAnalyzer) (took 116 ms)
3 2024-12-28 20:07:11.899-0600 FINER t593 IndexDatabase.createAnnotationCache: failed to create annotation: repository {dir='/opengrok/src/openbmc/linux',type=git,historyCache=on,renamed=false,merge=true,annotationCache=off} does not allow to create annotation cache for '/opengrok/src/openbmc/linux/tools/testing/selftests/powerpc/tm/tm-signa
[all...] |