/openbmc/linux/arch/arm/boot/dts/renesas/ |
H A D | r8a77470.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/interrupt-controller/irq.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/clock/r8a77470-cpg-mssr.h> 11 #include <dt-bindings/power/r8a77470-sysc.h> 14 #address-cells = <2>; 15 #size-cells = <2>; 26 #address-cells = <1>; 27 #size-cells = <0>; 31 compatible = "arm,cortex-a7"; [all …]
|
H A D | r8a7745.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2016-2017 Cogent Embedded Inc. 8 #include <dt-bindings/interrupt-controller/irq.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/clock/r8a7745-cpg-mssr.h> 11 #include <dt-bindings/power/r8a7745-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 41 compatible = "fixed-clock"; 42 #clock-cells = <0>; [all …]
|
H A D | r8a7743.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2016-2017 Cogent Embedded Inc. 8 #include <dt-bindings/interrupt-controller/irq.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/clock/r8a7743-cpg-mssr.h> 11 #include <dt-bindings/power/r8a7743-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 24 compatible = "fixed-clock"; 25 #clock-cells = <0>; [all …]
|
H A D | r8a7794.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car E2 (R8A77940) SoC 9 #include <dt-bindings/clock/r8a7794-cpg-mssr.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/interrupt-controller/irq.h> 12 #include <dt-bindings/power/r8a7794-sysc.h> 16 #address-cells = <2>; 17 #size-cells = <2>; 39 compatible = "fixed-clock"; 40 #clock-cells = <0>; [all …]
|
H A D | r8a7744.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/interrupt-controller/irq.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/clock/r8a7744-cpg-mssr.h> 11 #include <dt-bindings/power/r8a7744-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 24 compatible = "fixed-clock"; 25 #clock-cells = <0>; 26 clock-frequency = <0>; [all …]
|
H A D | r8a7791.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car M2-W (R8A77910) SoC 5 * Copyright (C) 2013-2015 Renesas Electronics Corporation 6 * Copyright (C) 2013-2014 Renesas Solutions Corp. 10 #include <dt-bindings/clock/r8a7791-cpg-mssr.h> 11 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 #include <dt-bindings/interrupt-controller/irq.h> 13 #include <dt-bindings/power/r8a7791-sysc.h> 17 #address-cells = <2>; 18 #size-cells = <2>; [all …]
|
H A D | r8a7742.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/clock/r8a7742-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/interrupt-controller/irq.h> 11 #include <dt-bindings/power/r8a7742-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 24 compatible = "fixed-clock"; 25 #clock-cells = <0>; 26 clock-frequency = <0>; [all …]
|
H A D | r8a7790.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car H2 (R8A77900) SoC 6 * Copyright (C) 2013-2014 Renesas Solutions Corp. 10 #include <dt-bindings/clock/r8a7790-cpg-mssr.h> 11 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 #include <dt-bindings/interrupt-controller/irq.h> 13 #include <dt-bindings/power/r8a7790-sysc.h> 17 #address-cells = <2>; 18 #size-cells = <2>; 46 compatible = "fixed-clock"; [all …]
|
H A D | r8a7793.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car M2-N (R8A77930) SoC 5 * Copyright (C) 2014-2015 Renesas Electronics Corporation 8 #include <dt-bindings/clock/r8a7793-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/interrupt-controller/irq.h> 11 #include <dt-bindings/power/r8a7793-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 37 compatible = "fixed-clock"; [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/phy/ |
H A D | renesas,rcar-gen2-usb-phy.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/phy/renesas,rcar-gen2-usb-phy.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Renesas R-Car Gen2 USB PHY 10 - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> 15 - enum: 16 - renesas,usb-phy-r8a7742 # RZ/G1H 17 - renesas,usb-phy-r8a7743 # RZ/G1M 18 - renesas,usb-phy-r8a7744 # RZ/G1N [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | r8a7791.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2013-2015 Renesas Electronics Corporation 6 * Copyright (C) 2013-2014 Renesas Solutions Corp. 10 #include <dt-bindings/clock/r8a7791-cpg-mssr.h> 11 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 #include <dt-bindings/interrupt-controller/irq.h> 13 #include <dt-bindings/power/r8a7791-sysc.h> 17 #address-cells = <2>; 18 #size-cells = <2>; 45 compatible = "fixed-clock"; [all …]
|
H A D | r8a7794.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 9 #include <dt-bindings/clock/r8a7794-cpg-mssr.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/interrupt-controller/irq.h> 12 #include <dt-bindings/power/r8a7794-sysc.h> 16 #address-cells = <2>; 17 #size-cells = <2>; 39 compatible = "fixed-clock"; 40 #clock-cells = <0>; 41 clock-frequency = <0>; [all …]
|
H A D | r8a7790.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 * Copyright (C) 2013-2014 Renesas Solutions Corp. 10 #include <dt-bindings/clock/r8a7790-cpg-mssr.h> 11 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 #include <dt-bindings/interrupt-controller/irq.h> 13 #include <dt-bindings/power/r8a7790-sysc.h> 17 #address-cells = <2>; 18 #size-cells = <2>; 46 compatible = "fixed-clock"; 47 #clock-cells = <0>; [all …]
|
H A D | r8a7793.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2014-2015 Renesas Electronics Corporation 8 #include <dt-bindings/clock/r8a7793-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/interrupt-controller/irq.h> 11 #include <dt-bindings/power/r8a7793-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 37 compatible = "fixed-clock"; 38 #clock-cells = <0>; [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/pci/ |
H A D | renesas,pci-rcar-gen2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Marek Vasut <marek.vasut+renesas@gmail.com> 11 - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> 14 This is the bridge used internally to connect the USB controllers to the 15 AHB. There is one bridge instance per USB port connected to the internal 21 - items: 22 - enum: [all …]
|
/openbmc/u-boot/drivers/phy/ |
H A D | phy-rcar-gen2.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * Renesas RCar Gen2 USB PHY driver 13 #include <generic-phy.h> 16 #include <usb.h> 29 /* USB General control register (UGCTRL) */ 33 /* USB General control register 2 (UGCTRL2) */ 41 /* USB General status register (UGSTS) */ 51 static int rcar_gen2_phy_phy_init(struct phy *phy) in rcar_gen2_phy_phy_init() argument 53 struct rcar_gen2_phy *priv = dev_get_priv(phy->dev); in rcar_gen2_phy_phy_init() 54 u16 chan = phy->id & 0xffff; in rcar_gen2_phy_phy_init() [all …]
|
H A D | Makefile | 1 # SPDX-License-Identifier: GPL-2.0+ 3 # Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ 4 # Written by Jean-Jacques Hiblot <jjhiblot@ti.com> 6 obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o 7 obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o 8 obj-$(CONFIG_BCM6318_USBH_PHY) += bcm6318-usbh-phy.o 9 obj-$(CONFIG_BCM6348_USBH_PHY) += bcm6348-usbh-phy.o 10 obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o 11 obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o 12 obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/usb/ |
H A D | renesas,usb-xhci.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/usb/renesas,usb-xhci.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Renesas USB xHCI controllers 10 - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> 11 - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> 16 - items: 17 - enum: 18 - renesas,xhci-r8a7742 # RZ/G1H [all …]
|
H A D | renesas,usbhs.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only 3 --- 4 $id: http://devicetree.org/schemas/usb/renesas,usbhs.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Renesas USBHS (HS-USB) controller 10 - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> 15 - items: 16 - const: renesas,usbhs-r7s72100 # RZ/A1 17 - const: renesas,rza1-usbhs 19 - items: [all …]
|
/openbmc/linux/drivers/usb/host/ |
H A D | xhci-rcar.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * xHCI host controller driver for R-Car SoCs 13 #include <linux/usb/phy.h> 16 #include "xhci-plat.h" 17 #include "xhci-rzv2m.h" 23 * - The V3 firmware is for all R-Car Gen3 24 * - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes 25 * performance degradation. So, this driver continues to use the V1 if R-Car 26 * Gen2. 27 * - The V1 firmware is impossible to use on R-Car Gen3. [all …]
|
/openbmc/linux/drivers/phy/renesas/ |
H A D | phy-rcar-gen2.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * Renesas R-Car Gen2 PHY driver 15 #include <linux/phy/phy.h> 28 /* USB General control register (UGCTRL) */ 32 /* USB General control register 2 (UGCTRL2) */ 42 /* USB General status register (UGSTS) */ 48 struct phy *phy; member 76 static int rcar_gen2_phy_init(struct phy *p) in rcar_gen2_phy_init() 78 struct rcar_gen2_phy *phy = phy_get_drvdata(p); in rcar_gen2_phy_init() local 79 struct rcar_gen2_channel *channel = phy->channel; in rcar_gen2_phy_init() [all …]
|
H A D | phy-rcar-gen3-usb2.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * Renesas R-Car Gen3 for USB2.0 PHY driver 5 * Copyright (C) 2015-2017 Renesas Electronics Corporation 7 * This is based on the phy-rcar-gen2 driver: 12 #include <linux/extcon-provider.h> 18 #include <linux/phy/phy.h> 23 #include <linux/usb/of.h> 100 struct phy *phy; member 135 * ---------------------+---------------++--------------+------------ 146 if (ch->extcon_host) { in rcar_gen3_phy_usb2_work() [all …]
|
/openbmc/linux/drivers/usb/renesas_usbhs/ |
H A D | common.c | 1 // SPDX-License-Identifier: GPL-1.0+ 3 * Renesas USB driver 33 * +------ [all...] |
/openbmc/linux/ |
H A D | opengrok0.0.log | 1 2024-12-28 20:09:05.996-0600 FINEST t1171 PendingFileCompleter.doRename: Moved pending as file: '/opengrok/data/xref/openbmc/linux/drivers/staging/media/av7110/video-continue.rst.gz' 2 2024-12-28 20:09:05.942-0600 FINEST t1149 PendingFileCompleter.doRename: Moved pending as file: '/opengrok/data/xref/openbmc/u-boot/arch/sh/config.mk.gz' 3 2024-12-2 [all...] |
H A D | opengrok1.0.log | 1 2024-12-28 20:07:11.902-0600 FINER t583 IndexDatabase.createAnnotationCache: failed to create annotation: repository {dir='/opengrok/src/openbmc/linux',type=git,historyCache=on,renamed=false,merge=true,annotationCache=off} does not allow to create annotation cache for '/opengrok/src/openbmc/linux/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c' 2 2024-12-28 20:07:11.913-0600 FINEST t583 Statistics.logIt: Added: '/openbmc/linux/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c' (CAnalyzer) (took 116 ms) 3 2024-12-28 20:07:11.899-0600 FINER t593 IndexDatabase.createAnnotationCache: failed to create annotation: repository {dir='/opengrok/src/openbmc/linux',type=git,historyCache=on,renamed=false,merge=true,annotationCache=off} does not allow to create annotation cache for '/opengrok/src/openbmc/linux/tools/testing/selftests/powerpc/tm/tm-signa [all...] |