| /openbmc/linux/Documentation/admin-guide/media/ |
| H A D | qcom_camss_8x96_graph.dot | 5 …n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, sty…
6 n00000001:port1 -> n0000000a:port0 [style=dashed]
7 n00000001:port1 -> n0000000d:port0 [style=dashed]
8 n00000001:port1 -> n00000010:port0 [style=dashed]
9 n00000001:port1 -> n00000013:port0 [style=dashed]
10 …n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, sty…
11 n00000004:port1 -> n0000000a:port0 [style=dashed]
12 n00000004:port1 -> n0000000d:port0 [style=dashed]
13 n00000004:port1 -> n00000010:port0 [style=dashed]
14 n00000004:port1 -> n00000013:port0 [style=dashed]
[all …]
|
| H A D | qcom_camss_graph.dot | 5 …n00000001 [label="{{<port0> 0} | msm_csiphy0\n/dev/v4l-subdev0 | {<port1> 1}}", shape=Mrecord, sty…
6 n00000001:port1 -> n00000007:port0 [style=dashed]
7 n00000001:port1 -> n0000000a:port0 [style=dashed]
8 …n00000004 [label="{{<port0> 0} | msm_csiphy1\n/dev/v4l-subdev1 | {<port1> 1}}", shape=Mrecord, sty…
9 n00000004:port1 -> n00000007:port0 [style=dashed]
10 n00000004:port1 -> n0000000a:port0 [style=dashed]
11 …n00000007 [label="{{<port0> 0} | msm_csid0\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style…
12 n00000007:port1 -> n0000000d:port0 [style=dashed]
13 n00000007:port1 -> n00000010:port0 [style=dashed]
14 …n0000000a [label="{{<port0> 0} | msm_csid1\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style…
[all …]
|
| H A D | imx6q-sabresd.dot | 3 …n00000001 [label="{{<port0> 0} | ipu1_csi0\n/dev/v4l-subdev0 | {<port1> 1 | <port2> 2}}", shape=Mr…
5 n00000001:port1 -> n0000000f:port0 [style=dashed]
6 n00000001:port1 -> n0000000b:port0 [style=dashed]
8 …n0000000b [label="{{<port0> 0 | <port1> 1} | ipu1_vdic\n/dev/v4l-subdev1 | {<port2> 2}}", shape=Mr…
9 n0000000b:port2 -> n0000000f:port0 [style=dashed]
10 …n0000000f [label="{{<port0> 0} | ipu1_ic_prp\n/dev/v4l-subdev2 | {<port1> 1 | <port2> 2}}", shape=…
11 n0000000f:port1 -> n00000013:port0 [style=dashed]
12 n0000000f:port2 -> n0000001c:port0 [style=dashed]
13 …n00000013 [label="{{<port0> 0} | ipu1_ic_prpenc\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, …
16 …n0000001c [label="{{<port0> 0} | ipu1_ic_prpvf\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, s…
[all …]
|
| H A D | imx6q-sabreauto.dot | 3 …n00000001 [label="{{<port0> 0} | ipu1_csi0\n/dev/v4l-subdev0 | {<port1> 1 | <port2> 2}}", shape=Mr…
5 n00000001:port1 -> n0000000f:port0 [style=dashed]
6 n00000001:port1 -> n0000000b:port0 [style=dashed]
8 …n0000000b [label="{{<port0> 0 | <port1> 1} | ipu1_vdic\n/dev/v4l-subdev1 | {<port2> 2}}", shape=Mr…
9 n0000000b:port2 -> n0000000f:port0 [style=dashed]
10 …n0000000f [label="{{<port0> 0} | ipu1_ic_prp\n/dev/v4l-subdev2 | {<port1> 1 | <port2> 2}}", shape=…
11 n0000000f:port1 -> n00000013:port0 [style=dashed]
12 n0000000f:port2 -> n0000001c:port0 [style=dashed]
13 …n00000013 [label="{{<port0> 0} | ipu1_ic_prpenc\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, …
16 …n0000001c [label="{{<port0> 0} | ipu1_ic_prpvf\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, s…
[all …]
|
| H A D | vimc.dot | 5 …n00000001 [label="{{} | Sensor A\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, f…
6 n00000001:port0 -> n00000005:port0 [style=bold]
7 n00000001:port0 -> n0000000b [style=bold]
9 …n00000002 [label="{{} | Lens A\n/dev/v4l-subdev5 | {<port0>}}", shape=Mrecord, style=filled, fillc…
10 …n00000003 [label="{{} | Sensor B\n/dev/v4l-subdev1 | {<port0> 0}}", shape=Mrecord, style=filled, f…
11 n00000003:port0 -> n00000008:port0 [style=bold]
12 n00000003:port0 -> n0000000f [style=bold]
14 …n00000004 [label="{{} | Lens B\n/dev/v4l-subdev6 | {<port0>}}", shape=Mrecord, style=filled, fillc…
15 …n00000005 [label="{{<port0> 0} | Debayer A\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style…
16 n00000005:port1 -> n00000015:port0
[all …]
|
| H A D | rkisp1.dot | 3 …n00000001 [label="{{<port0> 0 | <port1> 1} | rkisp1_isp\n/dev/v4l-subdev0 | {<port2> 2 | <port3> 3…
4 n00000001:port2 -> n00000006:port0
5 n00000001:port2 -> n00000009:port0
7 …n00000006 [label="{{<port0> 0} | rkisp1_resizer_mainpath\n/dev/v4l-subdev1 | {<port1> 1}}", shape=…
9 …n00000009 [label="{{<port0> 0} | rkisp1_resizer_selfpath\n/dev/v4l-subdev2 | {<port1> 1}}", shape=…
16 …n0000001c [label="{{} | imx219 4-0010\n/dev/v4l-subdev3 | {<port0> 0}}", shape=Mrecord, style=fill…
17 n0000001c:port0 -> n00000001:port0
|
| /openbmc/linux/drivers/scsi/mvsas/ |
| H A D | mv_64xx.h | 54 MVS_P0_INT_STAT = 0x160, /* port0 interrupt status */
55 MVS_P0_INT_MASK = 0x164, /* port0 interrupt mask */
61 MVS_P0_SER_CTLSTAT = 0x180, /* port0 serial control/status */
69 MVS_P0_CFG_ADDR = 0x1C0, /* port0 phy register address */
70 MVS_P0_CFG_DATA = 0x1C4, /* port0 phy register data */
76 MVS_P0_VSR_ADDR = 0x1E0, /* port0 VSR address */
77 MVS_P0_VSR_DATA = 0x1E4, /* port0 VSR data */
|
| H A D | mv_94xx.h | 73 MVS_P0_INT_STAT = 0x180, /* port0 interrupt status */
74 MVS_P0_INT_MASK = 0x184, /* port0 interrupt mask */
80 MVS_P0_SER_CTLSTAT = 0x1D0, /* port0 serial control/status */
85 MVS_P0_CFG_ADDR = 0x200, /* port0 phy register address */
86 MVS_P0_CFG_DATA = 0x204, /* port0 phy register data */
|
| /openbmc/linux/Documentation/driver-api/usb/ |
| H A D | typec.rst | 31 first port will be named "port0", the second "port1" and so on.
35 is attached to. The partner attached to port "port0" will be named
36 "port0-partner". Full path to the device would be
37 /sys/class/typec/port0/port0-partner/.
40 devices under /sys/class/typec/. The cable attached to the port "port0" port
41 will be named port0-cable and the plug on the SOP Prime end (see USB Power
42 Delivery Specification ch. 2.4) will be named "port0-plug0" and on the SOP
43 Double Prime end "port0-plug1". The parent of a cable will always be the port,
50 mode of port0-partner will be presented under /sys/class/typec/port0-partner/.
52 device named "mode<index>", for example /sys/class/typec/port0/<alternate
|
| /openbmc/u-boot/drivers/net/mscc_eswitch/ |
| H A D | luton_switch.c | 140 PORT0, enumerator
173 #define MAX_PORT (PORT23 - PORT0 + 1)
175 #define MIN_INT_PORT PORT0
176 #define MAX_INT_PORT (PORT11 - PORT0 + 1)
327 priv->regs[ANA] + ANA_PORT_VLAN_CFG(port - PORT0)); in luton_gmii_port_init()
330 setbits_le32(priv->regs[SYS] + SYS_SWITCH_PORT_MODE(port - PORT0), in luton_gmii_port_init()
349 priv->regs[ANA] + ANA_PORT_VLAN_CFG(port - PORT0)); in luton_port_init()
352 setbits_le32(priv->regs[SYS] + SYS_SWITCH_PORT_MODE(port - PORT0), in luton_port_init()
396 priv->regs[ANA] + ANA_PORT_VLAN_CFG(port - PORT0)); in luton_ext_port_init()
399 setbits_le32(priv->regs[SYS] + SYS_SWITCH_PORT_MODE(port - PORT0), in luton_ext_port_init()
[all …]
|
| H A D | ocelot_switch.c | 103 PORT0, enumerator
110 #define MAX_PORT (PORT3 - PORT0)
302 MAC_VID, priv->regs[ANA] + ANA_PORT_VLAN_CFG(port - PORT0)); in ocelot_port_init()
305 setbits_le32(priv->regs[QSYS] + QSYS_SWITCH_PORT_MODE(port - PORT0), in ocelot_port_init()
352 for (i = PORT0; i <= PORT3; i++) in ocelot_initialize()
459 { PORT0, "port0" }, in ocelot_probe()
|
| /openbmc/linux/Documentation/devicetree/bindings/usb/ |
| H A D | fsl-usb.txt | 18 - port0 : boolean; if defined, indicates port0 is connected for
24 "port0" (or both) must be defined for "fsl-usb2-mph" compatible
52 port0;
|
| /openbmc/linux/Documentation/devicetree/bindings/net/ |
| H A D | mscc,vsc7514-switch.yaml | 72 - description: Port0 target
97 - const: port0
163 reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
174 port0: port@0 {
210 reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
|
| /openbmc/linux/drivers/usb/mtu3/ |
| H A D | mtu3_dr.c | 28 /* only port0 supports dual-role mode */
35 dev_dbg(ssusb->dev, "%s (switch u%d port0 to %s)\n", __func__, in ssusb_port0_switch()
39 /* 1. power off and disable u2 port0 */ in ssusb_port0_switch()
44 /* 2. power on, enable u2 port0 and select its mode */ in ssusb_port0_switch()
51 /* 1. power off and disable u3 port0 */ in ssusb_port0_switch()
56 /* 2. power on, enable u3 port0 and select its mode */ in ssusb_port0_switch()
|
| H A D | mtu3_host.c | 250 /* here not skip port0 due to PDN can be set repeatedly */
291 * if support OTG, gadget driver will switch port0 to device mode in ssusb_host_setup()
296 /* if port0 supports dual-role, works as host mode by default */ in ssusb_host_setup()
309 * If host supports multiple ports, the VBUSes(5V) of ports except port0
|
| /openbmc/linux/drivers/watchdog/ |
| H A D | pcwd.c | 222 int port0, last_port0; /* Double read for stabilising */ in send_isa_command() local
232 port0 = inb_p(pcwd_private.io_addr); in send_isa_command()
234 last_port0 = port0; in send_isa_command()
235 port0 = inb_p(pcwd_private.io_addr); in send_isa_command()
237 if (port0 == last_port0) in send_isa_command()
244 pr_debug("received following data for cmd=0x%02x: port0=0x%02x last_port0=0x%02x\n", in send_isa_command()
245 cmd, port0, last_port0); in send_isa_command()
247 return port0; in send_isa_command()
809 int port0, last_port0; /* Reg 0, in case it's REV A */ in pcwd_isa_match() local
824 port0 = inb_p(base_addr); /* For REV A boards */ in pcwd_isa_match()
[all …]
|
| /openbmc/u-boot/doc/device-tree-bindings/ata/ |
| H A D | intel-sata.txt | 15 - intel,sata-port0-gen3-tx : Value for the IOBP_SP0G3IR register
25 intel,sata-port0-gen3-tx = <0x00880a7f>;
|
| /openbmc/u-boot/arch/arm/mach-mvebu/serdes/axp/ |
| H A D | high_speed_env_spec.c | 17 /* PEX: Change of Slew Rate port0 */
21 /* PEX: Change PLL BW port0 */
37 /* SGMII: FFE setting Port0 */
40 /* SGMII: SELMUP and SELMUF Port0 */
|
| /openbmc/linux/Documentation/devicetree/bindings/phy/ |
| H A D | mediatek,tphy.yaml | 24 u2 port0 0x0800 U2PHY_COM
25 u3 port0 0x0900 U3PHYD
39 u2 port0 0x0000 MISC
42 u3 port0 0x0700 SPLLC
|
| H A D | mediatek,xsphy.yaml | 20 u2 port0 0x0000 MISC
30 u31 port0 0x3400 DIG_LN_TOP
|
| /openbmc/linux/Documentation/ABI/testing/ |
| H A D | sysfs-class-typec | 1 USB Type-C port devices (eg. /sys/class/typec/port0/)
152 USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
223 USB Type-C cable devices (eg. /sys/class/typec/port0-cable/)
226 (eg. /sys/class/typec/port0-plug0). If the cable is active and has also SOP
274 partner (e.g /sys/class/typec/port0-partner/) and
275 cable (e.g /sys/class/typec/port0-cable/) devices. Consequently, the example file
|
| /openbmc/linux/arch/powerpc/platforms/83xx/ |
| H A D | usb_834x.c | 68 prop = of_get_property(np, "port0", NULL); in mpc834x_usb_cfg()
71 pr_warn("834x USB port0 can't be used by both DR and MPH!\n"); in mpc834x_usb_cfg()
|
| /openbmc/linux/Documentation/devicetree/bindings/pci/ |
| H A D | mediatek-pcie.txt | 89 <0 0x1a142000 0 0x1000>, /* Port0 registers */
92 reg-names = "subsys", "port0", "port1", "port2";
186 reg-names = "port0";
220 reg-names = "port0";
|
| H A D | apple,pcie.yaml | 49 - const: port0
119 reg-names = "config", "rc", "port0", "port1", "port2";
|
| /openbmc/linux/sound/soc/generic/ |
| H A D | audio-graph-card2.c | 782 struct device_node *port0, *port1, *ports; in audio_graph2_link_c2c() local
805 port0 = lnk; in audio_graph2_link_c2c()
806 ports = of_get_parent(port0); in audio_graph2_link_c2c()
837 ep0 = port_to_endpoint(port0); in audio_graph2_link_c2c()
867 of_node_put(port0); in audio_graph2_link_c2c()
1020 struct device_node *port0 = lnk; in graph_count_c2c() local
1022 struct device_node *ep0 = port_to_endpoint(port0); in graph_count_c2c()
|