| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | x-powers,axp152.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: X-Powers AXP PMIC
10 - Chen-Yu Tsai <wens@csie.org>
13 - if:
18 - x-powers,axp152
19 - x-powers,axp202
20 - x-powers,axp209
[all …]
|
| H A D | stericsson,ab8500.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ST-Ericsson Analog Baseband AB8500 and AB8505
10 - Linus Walleij <linus.walleij@linaro.org>
13 the AB8500 "Analog Baseband" is the mixed-signals integrated circuit
14 handling power management (regulators), analog-to-digital conversion
15 (ADC), battery charging, fuel gauging of the battery, battery-backed
16 RTC, PWM, USB PHY and some GPIO lines in the ST-Ericsson U8500 platforms
21 USB charging handling has changed, and it has an embedded USB-to-serial
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/net/nfc/ |
| H A D | st,st-nci.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/net/nfc/st,st-nci.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Krzysztof Kozlowski <krzk@kernel.org>
15 - st,st21nfcb-i2c
16 - st,st21nfcb-spi
17 - st,st21nfcc-i2c
19 reset-gpios:
22 ese-present:
[all …]
|
| H A D | st,st21nfca.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Krzysztof Kozlowski <krzk@kernel.org>
14 const: st,st21nfca-i2c
16 enable-gpios:
19 ese-present:
30 uicc-present:
37 - compatible
38 - enable-gpios
[all …]
|
| /openbmc/linux/Documentation/virt/kvm/x86/ |
| H A D | msr.rst | 1 .. SPDX-License-Identifier: GPL-2.0
4 KVM-specific MSRs
16 ---------------
24 4-byte alignment physical address of a memory area which must be
42 An odd version indicates an in-progress update.
53 Note that although MSRs are per-CPU entities, the effect of this
63 4-byte aligned physical address of a memory area which must be in
80 updates of this structure is arbitrary and implementation-dependent.
89 An odd version indicates an in-progress update.
104 tsc-related quantity to nanoseconds
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/net/ |
| H A D | qcom,ipa.yaml | 1 # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Alex Elder <elder@kernel.org>
21 and has a distinct interrupt and a separately-defined address space.
28 - |
29 -------- ---------
31 | AP +<---. .----+ Modem |
32 | +--. | | .->+ |
34 -------- | | | | ---------
[all …]
|
| H A D | fsl-tsec-phy.txt | 5 the definition of the PHY node in booting-without-of.txt for an example
9 - reg : Offset and length of the register set for the device, and optionally
14 - compatible : Should define the compatible device type for the
16 - "fsl,gianfar-tbi"
17 - "fsl,gianfar-mdio"
18 - "fsl,etsec2-tbi"
19 - "fsl,etsec2-mdio"
20 - "fsl,ucc-mdio"
21 - "fsl,fman-mdio"
23 - "gianfar"
[all …]
|
| H A D | mediatek-dwmac.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Biao Huang <biao.huang@mediatek.com>
21 - mediatek,mt2712-gmac
22 - mediatek,mt8188-gmac
23 - mediatek,mt8195-gmac
25 - compatible
28 - $ref: snps,dwmac.yaml#
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/interrupt-controller/ |
| H A D | arm,gic-v3.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: ARM Generic Interrupt Controller, version 3
10 - Marc Zyngier <maz@kernel.org>
15 Software Generated Interrupts (SGI), and Locality-specific Peripheral
19 - $ref: /schemas/interrupt-controller.yaml#
24 - items:
25 - enum:
[all …]
|
| H A D | brcm,bcm7038-l1-intc.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7038-l1-intc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Broadcom BCM7038-style Level 1 interrupt controller
10 This block is a first level interrupt controller that is typically connected
11 directly to one of the HW INT lines on each CPU. Every BCM7xxx set-top chip
16 - 64, 96, 128, or 160 incoming level IRQ lines
18 - Most onchip peripherals are wired directly to an L1 input
20 - A separate instance of the register set for each CPU, allowing individual
[all …]
|
| H A D | riscv,cpu-intc.txt | 1 RISC-V Hart-Level Interrupt Controller (HLIC)
2 ---------------------------------------------
4 RISC-V cores include Control Status Registers (CSRs) which are local to each
5 CPU core (HART in RISC-V terminology) and can be read or written by software.
7 Every interrupt is ultimately routed through a hart's HLIC before it
10 The RISC-V supervisor ISA manual specifies three interrupt sources that are
11 attached to every HLIC: software interrupts, the timer interrupt, and external
13 timer interrupt comes from an architecturally mandated real-time timer that is
16 via the platform-level interrupt controller (PLIC).
18 All RISC-V systems that conform to the supervisor ISA specification are
[all …]
|
| H A D | apple,aic2.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/interrupt-controller/apple,aic2.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Apple Interrupt Controller 2
10 - Hector Martin <marcan@marcan.st>
13 The Apple Interrupt Controller 2 is a simple interrupt controller present on
18 - Level-triggered hardware IRQs wired to SoC blocks
19 - Single mask bit per IRQ
20 - Automatic masking on event delivery (auto-ack)
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
| H A D | pinctrl-mcp23s08.txt | 2 8-/16-bit I/O expander with serial interface (I2C/SPI)
5 - compatible : Should be
6 - "mcp,mcp23s08" (DEPRECATED) for 8 GPIO SPI version
7 - "mcp,mcp23s17" (DEPRECATED) for 16 GPIO SPI version
8 - "mcp,mcp23008" (DEPRECATED) for 8 GPIO I2C version or
9 - "mcp,mcp23017" (DEPRECATED) for 16 GPIO I2C version of the chip
11 - "microchip,mcp23s08" for 8 GPIO SPI version
12 - "microchip,mcp23s17" for 16 GPIO SPI version
13 - "microchip,mcp23s18" for 16 GPIO SPI version
14 - "microchip,mcp23008" for 8 GPIO I2C version or
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/ata/ |
| H A D | pata-arasan.txt | 4 - compatible: "arasan,cf-spear1340"
5 - reg: Address range of the CF registers
6 - interrupt: Should contain the CF interrupt number
7 - clock-frequency: Interface clock rate, in Hz, one of
21 - arasan,broken-udma: if present, UDMA mode is unusable
22 - arasan,broken-mwdma: if present, MWDMA mode is unusable
23 - arasan,broken-pio: if present, PIO mode is unusable
24 - dmas: one DMA channel, as described in bindings/dma/dma.txt
26 - dma-names: the corresponding channel name, must be "data"
31 compatible = "arasan,cf-spear1340";
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/gpio/ |
| H A D | gpio-thunderx.txt | 1 Cavium ThunderX/OCTEON-TX GPIO controller bindings
4 - reg: The controller bus address.
5 - gpio-controller: Marks the device node as a GPIO controller.
6 - #gpio-cells: Must be 2.
7 - First cell is the GPIO pin number relative to the controller.
8 - Second cell is a standard generic flag bitfield as described in gpio.txt.
11 - compatible: "cavium,thunder-8890-gpio", unused as PCI driver binding is used.
12 - interrupt-controller: Marks the device node as an interrupt controller.
13 - #interrupt-cells: Must be present and have value of 2 if
14 "interrupt-controller" is present.
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/usb/ |
| H A D | atmel-usb.txt | 6 - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
8 - reg: Address and length of the register set for the device
9 - interrupts: Should contain ohci interrupt
10 - clocks: Should reference the peripheral, host and system clocks
11 - clock-names: Should contain three strings
15 - num-ports: Number of ports.
16 - atmel,vbus-gpio: If present, specifies a gpio that needs to be
18 - atmel,oc-gpio: If present, specifies a gpio that needs to be
22 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
25 clock-names = "ohci_clk", "hclk", "uhpck";
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/iio/addac/ |
| H A D | adi,ad74115.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Cosmin Tanislav <cosmin.tanislav@analog.com>
13 The AD74115H is a single-channel software configurable input/output
17 chip solution with an SPI interface. The device features a 16-bit ADC and a
18 14-bit DAC.
25 - adi,ad74115h
30 spi-max-frequency:
33 spi-cpol: true
[all …]
|
| /openbmc/linux/drivers/iommu/ |
| H A D | msm_iommu.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
8 #include <linux/interrupt.h>
28 * be present. These mappings are typically determined at design time and are
33 /* Maximum number of context banks that can be present in IOMMU */
37 * struct msm_iommu_dev - a single IOMMU hardware instance
38 * ncb Number of context banks present on this IOMMU HW instance
40 * irq: Interrupt number
64 * struct msm_iommu_ctx_dev - an IOMMU context bank instance
68 * bank, terminated by -1. The MID is a set of signals on the
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | armada-385-atl-x530DP.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
19 pwm-polarity = <1>;
24 #address-cells = <1>;
25 #size-cells = <0>;
30 #address-cells = <1>;
31 #size-cells = <0>;
36 #address-cells = <1>;
37 #size-cells = <0>;
42 gpio-controller;
43 #gpio-cells = <2>;
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/media/ |
| H A D | st-rc.txt | 1 Device-Tree bindings for ST IRB IP
4 - compatible: Should contain "st,comms-irb".
5 - reg: Base physical address of the controller and length of memory
7 - interrupts: interrupt-specifier for the sole interrupt generated by
8 the device. The interrupt specifier format depends on the interrupt
10 - rx-mode: can be "infrared" or "uhf". This property specifies the L1
11 protocol used for receiving remote control signals. rx-mode should
12 be present iff the rx pins are wired up.
13 - tx-mode: should be "infrared". This property specifies the L1
14 protocol used for transmitting remote control signals. tx-mode should
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/ |
| H A D | example-schema.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 # All the top-level keys are standard json-schema keywords except for
9 # file present at the URL.
10 $id: http://devicetree.org/schemas/example-schema.yaml#
11 # $schema is the meta-schema this schema should be validated with.
12 $schema: http://devicetree.org/meta-schemas/core.yaml#
17 - Rob Herring <robh@kernel.org>
20 A more detailed multi-line description of the binding.
44 - items:
[all …]
|
| /openbmc/linux/drivers/irqchip/ |
| H A D | irq-sifive-plic.c | 1 // SPDX-License-Identifier: GPL-2.0
8 #include <linux/interrupt.h>
24 * This driver implements a version of the RISC-V PLIC with the actual layout
27 * https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf
29 * The largest number supported by devices marked as 'sifive,plic-1.0.0', is
30 * 1024, of which device 0 is defined as non-existent by the RISC-V Privileged
38 * Each interrupt source has a priority register associated with it.
45 * Each hart context has a vector of interrupt enable bits associated with it.
46 * There's one bit for each interrupt source.
54 * take an interrupt, and a register to claim interrupts.
[all …]
|
| /openbmc/linux/arch/openrisc/include/asm/ |
| H A D | spr_defs.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */
10 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
19 /* Definition of special-purpose registers (SPRs). */
141 #define SPR_VR_UVRP 0x00000040 /* Updated Version Registers Present */
154 * Bit definitions for the Unit Present Register
157 #define SPR_UPR_UP 0x00000001 /* UPR present */
158 #define SPR_UPR_DCP 0x00000002 /* Data cache present */
159 #define SPR_UPR_ICP 0x00000004 /* Instruction cache present */
160 #define SPR_UPR_DMP 0x00000008 /* Data MMU present */
161 #define SPR_UPR_IMP 0x00000010 /* Instruction MMU present */
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/i2c/ |
| H A D | i2c.txt | 8 -----------------------------
10 - #address-cells - should be <1>. Read more about addresses below.
11 - #size-cells - should be <0>.
12 - compatible - name of I2C bus controller
21 -----------------------------
26 - clock-frequency
29 - i2c-bus
31 devices and non-I2C devices, the 'i2c-bus' subnode can be used for
32 populating I2C devices. If the 'i2c-bus' subnode is present, only
34 '#address-cells' and '#size-cells' must be defined under this subnode
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/arm/ |
| H A D | pmu.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Mark Rutland <mark.rutland@arm.com>
11 - Will Deacon <will.deacon@arm.com>
16 representation in the device tree should be done as under:-
21 - enum:
22 - apm,potenza-pmu
23 - apple,avalanche-pmu
24 - apple,blizzard-pmu
[all …]
|