| /openbmc/linux/Documentation/devicetree/bindings/media/cec/ |
| H A D | cec-gpio.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/media/cec/cec-gpio.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Hans Verkuil <hverkuil-cisco@xs4all.nl>
14 hooked up to a pull-up GPIO line and - optionally - the HPD line is hooked up
17 Please note:: the maximum voltage for the CEC line is 3.63V, for the HPD and
23 const: cec-gpio
25 cec-gpios:
31 hpd-gpios:
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/panel/ |
| H A D | panel-edp.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/panel/panel-edp.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Douglas Anderson <dianders@chromium.org>
14 to a Embedded DisplayPort AUX bus (see display/dp-aux-bus.yaml) without
17 board, either for second-sourcing purposes or to support multiple SKUs
51 :<T1>:<T2>: :<--T10-->:<T11>:<T12>:
52 : +-----------------------+---------+---------+
53 eDP -----------+ Black video | Src vid | Blk vid +
[all …]
|
| H A D | panel-common.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/display/panel/panel-common.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
24 width-mm:
29 height-mm:
43 non-descriptive information. For instance an LCD panel in a system that
55 panel-timing:
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/ti/ |
| H A D | ti,tpd12s015.txt | 5 - compatible: "ti,tpd12s015"
8 - gpios: CT CP HPD, LS OE and HPD gpios
11 - Video port 0 for HDMI input
12 - Video port 1 for HDMI output
15 -------
20 gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
22 <&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
25 #address-cells = <1>;
26 #size-cells = <0>;
32 remote-endpoint = <&hdmi_out>;
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/samsung/ |
| H A D | samsung,exynos-hdmi.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/display/samsung/samsung,exynos-hdmi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Inki Dae <inki.dae@samsung.com>
11 - Seung-Woo Kim <sw0312.kim@samsung.com>
12 - Kyungmin Park <kyungmin.park@samsung.com>
13 - Krzysztof Kozlowski <krzk@kernel.org>
18 - samsung,exynos4210-hdmi
19 - samsung,exynos4212-hdmi
[all …]
|
| /openbmc/linux/Documentation/admin-guide/media/ |
| H A D | cec.rst | 1 .. SPDX-License-Identifier: GPL-2.0
12 - Exynos4
13 - Exynos5
14 - STIH4xx HDMI CEC
15 - V4L2 adv7511 (same HW, but a different driver from the drm adv7511)
16 - stm32
17 - Allwinner A10 (sun4i)
18 - Raspberry Pi
19 - dw-hdmi (Synopsis IP)
20 - amlogic (meson ao-cec and ao-cec-g12a)
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/bridge/ |
| H A D | ti,sn65dsi86.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sandeep Panda <spanda@codeaurora.org>
23 enable-gpios:
27 suspend-gpios:
31 no-hpd:
34 Set if the HPD line on the bridge isn't hooked up to anything or is
37 vccio-supply:
40 vpll-supply:
[all …]
|
| H A D | analogix,dp.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Rob Herring <robh@kernel.org>
21 clock-names: true
25 phy-names:
28 force-hpd:
31 Indicate driver need force hpd when hpd detect failed, this
32 is used for some eDP screen which don not have a hpd signal.
34 hpd-gpios:
[all …]
|
| H A D | analogix,anx7814.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
10 - Andrzej Hajda <andrzej.hajda@intel.com>
11 - Neil Armstrong <neil.armstrong@linaro.org>
12 - Robert Foss <robert.foss@linaro.org>
17 - analogix,anx7808
18 - analogix,anx7812
19 - analogix,anx7814
[all …]
|
| H A D | toshiba,tc358767.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Andrey Gusakov <andrey.gusakov@cogentembedded.com>
19 - items:
20 - enum:
21 - toshiba,tc358867
22 - toshiba,tc9595
23 - const: toshiba,tc358767
24 - const: toshiba,tc358767
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/qcom/ |
| H A D | sa8295p-adp.dts | 1 // SPDX-License-Identifier: BSD-3-Clause
7 /dts-v1/;
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
11 #include <dt-bindings/spmi/spmi.h>
14 #include "sa8540p-pmics.dtsi"
18 compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
25 stdout-path = "serial0:115200n8";
28 dp2-connector {
29 compatible = "dp-connector";
[all …]
|
| H A D | sc7180-trogdor-homestar-r2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "sc7180-trogdor.dtsi"
11 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
12 #include "sc7180-trogdor-homestar.dtsi"
16 compatible = "google,homestar-rev2","google,homestar-rev23", "qcom,sc7180";
20 /delete-property/hpd-gpios;
21 no-hpd;
|
| H A D | sc7180-trogdor-ti-sn65dsi86.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 #include <dt-bindings/gpio/gpio.h>
17 off-on-delay-us = <500000>;
23 * This should help speed bootup because we have off-on-delay-us.
25 regulator-boot-on;
32 clock-frequency = <400000>;
37 pinctrl-names = "default";
38 pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
39 gpio-controller;
40 #gpio-cells = <2>;
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/exynos/ |
| H A D | exynos_dp.txt | 5 -dp-controller node
6 -dptx-phy node(defined inside dp-controller node)
8 For the DP-PHY initialization, we use the dptx-phy node.
9 Required properties for dptx-phy: deprecated, use phys and phy-names
10 -reg: deprecated
12 -samsung,enable-mask: deprecated
13 The bit-mask used to enable/disable DP PHY.
15 For the Panel initialization, we read data from dp-controller node.
16 Required properties for dp-controller:
17 -compatible:
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/msm/ |
| H A D | hdmi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Rob Clark <robdclark@gmail.com>
16 - qcom,hdmi-tx-8084
17 - qcom,hdmi-tx-8660
18 - qcom,hdmi-tx-8960
19 - qcom,hdmi-tx-8974
20 - qcom,hdmi-tx-8994
21 - qcom,hdmi-tx-8996
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/connector/ |
| H A D | hdmi-connector.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/display/connector/hdmi-connector.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
14 const: hdmi-connector
19 - a # Standard full size
20 - b # Never deployed?
21 - c # Mini
22 - d # Micro
[all …]
|
| H A D | dp-connector.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/connector/dp-connector.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Tomi Valkeinen <tomi.valkeinen@ti.com>
14 const: dp-connector
20 - full-size
21 - mini
23 hpd-gpios:
24 description: A GPIO line connected to HPD
[all …]
|
| H A D | dvi-connector.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/display/connector/dvi-connector.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
14 const: dvi-connector
18 hpd-gpios:
19 description: A GPIO line connected to HPD
22 ddc-i2c-bus:
34 dual-link:
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/ti/omap/ |
| H A D | omap5-uevm.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
5 /dts-v1/;
7 #include "omap5-board-common.dtsi"
11 compatible = "ti,omap5-uevm", "ti,omap5";
18 reserved-memory {
19 #address-cells = <2>;
20 #size-cells = <2>;
23 dsp_memory_region: dsp-memory@95000000 {
24 compatible = "shared-dma-pool";
[all …]
|
| H A D | am57xx-beagle-x15-revc.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
6 #include "am57xx-beagle-x15-common.dtsi"
9 model = "TI AM5728 BeagleBoard-X15 rev C";
13 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
15 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
19 pinctrl-names = "default", "hs";
20 pinctrl-0 = <&mmc1_pins_default>;
21 pinctrl-1 = <&mmc1_pins_hs>;
22 vmmc-supply = <&vdd_3v3>;
[all …]
|
| H A D | am57xx-beagle-x15-revb1.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
6 #include "am57xx-beagle-x15-common.dtsi"
9 model = "TI AM5728 BeagleBoard-X15 rev B1";
13 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
15 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
19 pinctrl-names = "default", "hs";
20 pinctrl-0 = <&mmc1_pins_default>;
21 pinctrl-1 = <&mmc1_pins_hs>;
22 vmmc-supply = <&vdd_3v3>;
[all …]
|
| H A D | am57xx-beagle-x15.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
6 #include "am57xx-beagle-x15-common.dtsi"
9 /* NOTE: This describes the "original" pre-production A2 revision */
10 model = "TI AM5728 BeagleBoard-X15";
14 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
16 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
20 pinctrl-names = "default", "hs";
21 pinctrl-0 = <&mmc1_pins_default>;
22 pinctrl-1 = <&mmc1_pins_hs>;
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/ |
| H A D | brcm,bcm2835-hdmi.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/display/brcm,bcm2835-hdmi.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Eric Anholt <eric@anholt.net>
14 const: brcm,bcm2835-hdmi
18 - description: HDMI register range
19 - description: HD register range
26 - description: The pixel clock
27 - description: The HDMI state machine clock
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/media/i2c/ |
| H A D | adv7604.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Hans Verkuil <hverkuil-cisco@xs4all.nl>
23 - enum:
24 - adi,adv7610
25 - adi,adv7611
26 - adi,adv7612
32 reg-names:
35 - const: main
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | bcm2836-rpi-2-b.dts | 1 /dts-v1/;
3 #include "bcm2835-rpi.dtsi"
4 #include "bcm283x-rpi-smsc9514.dtsi"
5 #include "bcm283x-rpi-usb-host.dtsi"
8 compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
17 gpios = <&gpio 47 0>;
22 gpios = <&gpio 35 0>;
23 default-state = "keep";
24 linux,default-trigger = "default-on";
30 pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
[all …]
|