|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60 |
|
| #
82f811bd |
| 07-Aug-2021 |
Stefan Wahren <stefan.wahren@i2se.com> |
dt-bindings: display: bcm2835: add optional property power-domains
The Raspberry Pi boards with BCM283x needs control of the power domains
to get display components running. DT schema warns us that
dt-bindings: display: bcm2835: add optional property power-domains
The Raspberry Pi boards with BCM283x needs control of the power domains
to get display components running. DT schema warns us that it's used, but not
documented as a optional property:
hdmi@7e902000: 'power-domains' does not match any of the regexes: ...
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1628334401-6577-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
show more ...
|
|
Revision tags: v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
| #
0499220d |
| 04-Jan-2021 |
Rob Herring <robh@kernel.org> |
dt-bindings: Add missing array size constraints
DT properties which can have multiple entries need to specify what the
entries are and define how many entries there can be. In the case of
only a sin
dt-bindings: Add missing array size constraints
DT properties which can have multiple entries need to specify what the
entries are and define how many entries there can be. In the case of
only a single entry, just 'maxItems: 1' is sufficient.
Add the missing entry constraints. These were found with a modified
meta-schema. Unfortunately, there are a few cases where the size
constraints are not defined such as common bindings, so the meta-schema
can't be part of the normal checks.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210104230253.2805217-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
show more ...
|
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59 |
|
| #
5f0b06da |
| 14-Aug-2020 |
Rob Herring <robh@kernel.org> |
dt-bindings: Remove more cases of 'allOf' containing a '$ref'
Another wack-a-mole pass of killing off unnecessary 'allOf + $ref'
usage.
json-schema versions draft7 and earlier have a weird behavior
dt-bindings: Remove more cases of 'allOf' containing a '$ref'
Another wack-a-mole pass of killing off unnecessary 'allOf + $ref'
usage.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Signed-off-by: Rob Herring <robh@kernel.org>
show more ...
|
|
Revision tags: v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7 |
|
| #
408e7e8a |
| 27-May-2020 |
Maxime Ripard <maxime@cerno.tech> |
dt-bindings: display: vc4: hdmi: Add missing clock-names property
While the device tree and the driver expected a clock-names property, it
wasn't explicitly documented in the previous binding. The d
dt-bindings: display: vc4: hdmi: Add missing clock-names property
While the device tree and the driver expected a clock-names property, it
wasn't explicitly documented in the previous binding. The documented order
was wrong too, so make sure clock-names is there and in the proper order.
Cc: devicetree@vger.kernel.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/10ef2821e10886b66af5f8ba3e212aa87e9fd360.1590594512.git-series.maxime@cerno.tech
show more ...
|
| #
09453600 |
| 27-May-2020 |
Maxime Ripard <maxime@cerno.tech> |
dt-bindings: display: Convert VC4 bindings to schemas
The BCM283x SoCs have a display pipeline composed of several controllers
with device tree bindings that are supported by Linux.
Now that we hav
dt-bindings: display: Convert VC4 bindings to schemas
The BCM283x SoCs have a display pipeline composed of several controllers
with device tree bindings that are supported by Linux.
Now that we have the DT validation in place, let's split into separate
files and convert the device tree bindings for those controllers to
schemas.
This is just a 1:1 conversion though, and some bindings were incomplete so
it results in example validation warnings that are going to be addressed in
the following patches.
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/2dc6384c945c7d35ab4f75464d3a77046dc125b3.1590594512.git-series.maxime@cerno.tech
show more ...
|
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59 |
|
| #
5f0b06da |
| 14-Aug-2020 |
Rob Herring <robh@kernel.org> |
dt-bindings: Remove more cases of 'allOf' containing a '$ref'
Another wack-a-mole pass of killing off unnecessary 'allOf + $ref'
usage.
json-schema versions draft7 and earlier h
dt-bindings: Remove more cases of 'allOf' containing a '$ref'
Another wack-a-mole pass of killing off unnecessary 'allOf + $ref'
usage.
json-schema versions draft7 and earlier have a weird behavior in that
any keywords combined with a '$ref' are ignored (silently). The correct
form was to put a '$ref' under an 'allOf'. This behavior is now changed
in the 2019-09 json-schema spec and '$ref' can be mixed with other
keywords. The json-schema library doesn't yet support this, but the
tooling now does a fixup for this and either way works.
This has been a constant source of review comments, so let's change this
treewide so everyone copies the simpler syntax.
Signed-off-by: Rob Herring <robh@kernel.org>
show more ...
|
|
Revision tags: v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7 |
|
| #
408e7e8a |
| 27-May-2020 |
Maxime Ripard <maxime@cerno.tech> |
dt-bindings: display: vc4: hdmi: Add missing clock-names property
While the device tree and the driver expected a clock-names property, it
wasn't explicitly documented in the previous bi
dt-bindings: display: vc4: hdmi: Add missing clock-names property
While the device tree and the driver expected a clock-names property, it
wasn't explicitly documented in the previous binding. The documented order
was wrong too, so make sure clock-names is there and in the proper order.
Cc: devicetree@vger.kernel.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/10ef2821e10886b66af5f8ba3e212aa87e9fd360.1590594512.git-series.maxime@cerno.tech
show more ...
|
| #
09453600 |
| 27-May-2020 |
Maxime Ripard <maxime@cerno.tech> |
dt-bindings: display: Convert VC4 bindings to schemas
The BCM283x SoCs have a display pipeline composed of several controllers
with device tree bindings that are supported by Linux.
dt-bindings: display: Convert VC4 bindings to schemas
The BCM283x SoCs have a display pipeline composed of several controllers
with device tree bindings that are supported by Linux.
Now that we have the DT validation in place, let's split into separate
files and convert the device tree bindings for those controllers to
schemas.
This is just a 1:1 conversion though, and some bindings were incomplete so
it results in example validation warnings that are going to be addressed in
the following patches.
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/2dc6384c945c7d35ab4f75464d3a77046dc125b3.1590594512.git-series.maxime@cerno.tech
show more ...
|