| /openbmc/linux/Documentation/devicetree/bindings/hwmon/ |
| H A D | max6697.txt | 4 - compatible:
16 - reg: I2C address
20 - smbus-timeout-disable
23 - extended-range-enable
24 Only valid for MAX6581. Set to enable extended temperature range.
25 Extended temperature will be disabled if not specified.
26 - beta-compensation-enable
27 Only valid for MAX6693 and MX6694. Set to enable beta compensation on
30 - alert-mask
34 - over-temperature-mask
[all …]
|
| H A D | ti,tmp401.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Guenter Roeck <linux@roeck-us.net>
24 - ti,tmp401
25 - ti,tmp411
26 - ti,tmp431
27 - ti,tmp432
28 - ti,tmp435
33 ti,extended-range-enable:
[all …]
|
| H A D | national,lm90.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jean Delvare <jdelvare@suse.com>
11 - Guenter Roeck <linux@roeck-us.net>
16 - adi,adm1032
17 - adi,adt7461
18 - adi,adt7461a
19 - adi,adt7481
20 - dallas,max6646
[all …]
|
| /openbmc/linux/include/sound/ac97/ |
| H A D | regs.h | 1 /* SPDX-License-Identifier: GPL-2.0+
33 /* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
34 #define AC97_EXTENDED_ID 0x28 /* Extended Audio ID */
35 #define AC97_EXTENDED_STATUS 0x2a /* Extended Audio Status and Control */
44 /* range 0x3c-0x58 - MODEM */
45 #define AC97_EXTENDED_MID 0x3c /* Extended Modem ID */
46 #define AC97_EXTENDED_MSTATUS 0x3e /* Extended Modem Status and Control */
59 /* range 0x5a-0x7b - Vendor Specific */
62 /* range 0x60-0x6f (page 1) - extended codec registers */
108 #define AC97_BC_16BIT_DAC 0x0000 /* 16-bit DAC resolution */
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/power/supply/ |
| H A D | qcom,pm8941-charger.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm Switch-Mode Battery Charger and Boost
10 - Sebastian Reichel <sre@kernel.org>
15 - qcom,pm8226-charger
16 - qcom,pm8941-charger
23 - description: charge done
24 - description: charge fast mode
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/memory-controllers/ |
| H A D | ti-aemif.txt | 4 provide a glue-less interface to a variety of asynchronous memory devices like
11 Davinci DM646x - http://www.ti.com/lit/ug/sprueq7c/sprueq7c.pdf
12 OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh77a/spruh77a.pdf
13 Kestone - http://www.ti.com/lit/ug/sprugz3a/sprugz3a.pdf
17 - compatible: "ti,davinci-aemif"
18 "ti,keystone-aemif"
19 "ti,da850-aemif"
21 - reg: contains offset/length value for AEMIF control registers
24 - #address-cells: Must be 2. The partition number has to be encoded in the
25 first address cell and it may accept values 0..N-1
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/marvell/ |
| H A D | armada-380.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
12 #include "armada-38x.dtsi"
19 #address-cells = <1>;
20 #size-cells = <0>;
21 enable-method = "marvell,armada-380-smp";
25 compatible = "arm,cortex-a9";
31 internal-regs {
33 compatible = "marvell,mv88f6810-pinctrl";
[all …]
|
| H A D | armada-385.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
12 #include "armada-38x.dtsi"
19 #address-cells = <1>;
20 #size-cells = <0>;
21 enable-method = "marvell,armada-380-smp";
25 compatible = "arm,cortex-a9";
30 compatible = "arm,cortex-a9";
37 compatible = "marvell,armada-370-pcie";
[all …]
|
| H A D | armada-xp-mv78230.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
13 #include "armada-xp.dtsi"
17 compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
25 #address-cells = <1>;
26 #size-cells = <0>;
27 enable-method = "marvell,armada-xp-smp";
31 compatible = "marvell,sheeva-v7";
34 clock-latency = <1000000>;
39 compatible = "marvell,sheeva-v7";
[all …]
|
| H A D | armada-xp-mv78460.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
13 #include "armada-xp.dtsi"
17 compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
27 #address-cells = <1>;
28 #size-cells = <0>;
29 enable-method = "marvell,armada-xp-smp";
33 compatible = "marvell,sheeva-v7";
36 clock-latency = <1000000>;
41 compatible = "marvell,sheeva-v7";
[all …]
|
| H A D | armada-xp-mv78260.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
13 #include "armada-xp.dtsi"
17 compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp";
26 #address-cells = <1>;
27 #size-cells = <0>;
28 enable-method = "marvell,armada-xp-smp";
32 compatible = "marvell,sheeva-v7";
35 clock-latency = <1000000>;
40 compatible = "marvell,sheeva-v7";
[all …]
|
| /openbmc/qemu/include/libdecnumber/ |
| H A D | decContext.h | 29 02110-1301, USA. */
31 /* ------------------------------------------------------------------ */
33 /* ------------------------------------------------------------------ */
37 /* status -- [any bits may be cleared, but not set, by user] */
38 /* round -- must be one of the enumerated rounding modes */
44 /* clamp -- must be either 0 or 1 */
45 /* digits -- must be in the range 1 through 999999999 */
46 /* emax -- must be in the range 0 through 999999999 */
47 /* emin -- must be in the range 0 through -999999999 */
48 /* extended -- must be either 0 or 1 [present only if DECSUBSET] */
[all …]
|
| /openbmc/linux/Documentation/PCI/ |
| H A D | acpi-info.rst | 1 .. SPDX-License-Identifier: GPL-2.0
39 If the OS is expected to manage a non-discoverable device described via
49 range below the bridge, window registers that describe the apertures, etc.
50 These are all device-specific, non-architected things, so the only way a
52 the device-specific details. The host bridge registers also include ECAM
58 spec defines Consumer/Producer only for the Extended Address Space
63 Prior to the addition of Extended Address Space descriptors, the failure of
66 bridge registers (including ECAM space) in PNP0C02 catch-all devices [6].
67 With the exception of ECAM, the bridge register space is device-specific
71 New architectures should be able to use "Consumer" Extended Address Space
[all …]
|
| /openbmc/linux/tools/arch/x86/kcpuid/ |
| H A D | cpuid.csv | 12 1, 0, EAX, 19:16, model_ext, Extended Model ID
13 1, 0, EAX, 27:20, family_ext, Extended Family ID
22 1, 0, ECX, 2, dtes64, DS area uses 64-bit layout
33 1, 0, ECX, 13, cmpxchg16b, 'CMPXCHG16B - Compare and Exchange Bytes' supported
36 1, 0, ECX, 17, pcid, Process-Context Identifiers feature present
43 …1, 0, ECX, 24, tsc_deadline_timer, LAPIC supports one-shot operation using a TSC deadline …
45 1, 0, ECX, 26, xsave, XSAVE/XRSTOR processor extended states (XSETBV/XGETBV/XCR0)
46 1, 0, ECX, 27, osxsave, OS has set CR4.OSXSAVE bit to enable XSETBV/XGETBV/XCR0
48 1, 0, ECX, 29, f16c, 16-bit floating-point conversion instruction supported
52 1, 0, EDX, 1, vme, Virtual-8086 Mode Enhancement
[all …]
|
| /openbmc/linux/Documentation/networking/device_drivers/ethernet/stmicro/ |
| H A D | stmmac.rst | 1 .. SPDX-License-Identifier: GPL-2.0+
13 - In This Release
14 - Feature List
15 - Kernel Configuration
16 - Command Line Parameters
17 - Driver Information and Notes
18 - Debug Information
19 - Support
33 (and older) and DesignWare(R) Cores Ethernet Quality-of-Service version 4.0
35 DesignWare(R) Cores XGMAC - 10G Ethernet MAC and DesignWare(R) Cores
[all …]
|
| /openbmc/linux/include/linux/platform_data/ |
| H A D | max6697.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */
4 * Copyright (c) 2012 Guenter Roeck <linux@roeck-us.net>
19 bool extended_range_enable; /* set to enable extended temp range */
20 bool beta_compensation; /* set to enable beta compensation */
|
| /openbmc/qemu/docs/system/s390x/ |
| H A D | css.rst | 5 functionless) channel paths, and channel devices (virtio-ccw, 3270, and
6 devices passed via vfio-ccw). It supports multiple subchannel sets (MSS) and
7 multiple channel subsystems extended (MCSS-E).
14 enable MCSS-E. Note that devices with a different cssid will not be visible
15 if the guest OS does not enable MCSS-E (which is true for all supported guest
18 Supported values for the subchannel set id (``<ssid>``) range from ``0-3``.
20 does not enable MSS (any Linux version that supports virtio also enables MSS).
24 The device number can range from ``0-0xffff``.
36 --------
38 * a virtio-net device, cssid/ssid/devno automatically assigned::
[all …]
|
| /openbmc/linux/kernel/time/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
21 # cycle update - x86/TSC misfeature
33 # Architecture can handle broadcast in a driver-agnostic way
72 Enable this option to test RTC library functions.
113 will only trigger on an as-needed basis when the system is idle.
138 desired range of dynticks CPUs to use it. This is implemented at
139 the expense of some overhead in user <-> kernel transitions:
156 tracking to enter/exit RCU extended quiescent states.
163 The major pre-requirement for full dynticks to work is to
173 userspace extended quiescent state and tickless cputime
[all …]
|
| /openbmc/linux/drivers/net/ethernet/oki-semi/pch_gbe/ |
| H A D | pch_gbe_phy.c | 1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 1999 - 2010 Intel Corporation.
12 #define PHY_MAX_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
25 #define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Register */
26 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Register */
27 #define PHY_EXT_STATUS 0x0F /* Extended Status Register */
29 #define PHY_EXT_PHYSP_CONTROL 0x14 /* Extended PHY Specific Control Register */
31 #define PHY_EXT_PHYSP_STATUS 0x1B /* Extended PHY Specific Status Register */
35 #define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
40 #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/regulator/ |
| H A D | richtek,rt6190.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Richtek RT6190 4-Switch BuckBoost controller
10 - ChiYuan Huang <cy_huang@richtek.com>
13 The RT6190 is 4-Switch BuckBoost controller designed for converting input
15 voltage. It operates with wide input voltage range from 4.5V to 36V, and
21 https://www.richtek.com/assets/product_file/RT6190/DS6190-02.pdf
24 - $ref: regulator.yaml#
29 - richtek,rt6190
[all …]
|
| /openbmc/linux/Documentation/mm/ |
| H A D | slub.rst | 8 SLUB can enable debugging only for selected slabs in order to avoid
13 to the kernel command line. That will enable full debugging for
18 slabs that have data in them. See "slabinfo -h" for more options when
22 gcc -o slabinfo tools/mm/slabinfo.c
30 -------------------------------------------
35 slub_debug=<Debug-Options>
36 Enable options for all slabs
38 slub_debug=<Debug-Options>,<slab name1>,<slab name2>,...
39 Enable options only for select slabs (no spaces
55 A Enable failslab filter mark for the cache
[all …]
|
| /openbmc/openbmc/meta-security/recipes-ids/suricata/files/ |
| H A D | suricata.yaml | 2 ---
13 # If you are using the CUDA pattern matcher (mpm-algo: ac-cuda), different rules
16 #max-pending-packets: 1024
18 # Runmode the engine should use. Please check --list-runmodes to get the available
27 # round-robin - Flows assigned to threads in a round robin fashion.
28 # active-packets - Flows assigned to threads that have the lowest number of
30 # hash - Flow alloted usihng the address hash. More of a random
33 #autofp-scheduler: active-packets
36 # it is a pure sniffing setup, set it to 'sniffer-only'.
38 # and 'sniffer-only' in IDS mode.
[all …]
|
| /openbmc/qemu/docs/system/devices/ |
| H A D | nvme.rst | 5 QEMU provides NVMe emulation through the ``nvme``, ``nvme-ns`` and
6 ``nvme-subsys`` devices.
12 `Simple Copy`_, `Zoned Namespaces`_, `metadata`_ and `End-to-End Data
19 --------------------
32 .. code-block:: console
34 -drive file=nvm.img,if=none,id=nvm
35 -device nvme,serial=deadbeef,drive=nvm
38 are mentioned here, but see ``-device nvme,help`` to list all possible
46 The number of MSI-X vectors that the device should support.
51 ``use-intel-id`` (default: ``off``)
[all …]
|
| /openbmc/u-boot/arch/x86/include/asm/arch-ivybridge/ |
| H A D | pei_data.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
12 /* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */
18 /* 0: Disable, 1: Enable */
71 * [0] = enable
75 * Ports 0-7 can be mapped to OC0-OC3
76 * Ports 8-13 can be mapped to OC4-OC7
80 * < 0x050 = Setting 1 (back panel, 1-5in, lowest tx amplitude)
81 * < 0x140 = Setting 2 (back panel, 5-14in, highest tx amplitude)
84 * < 0x130 = Setting 2 (back panel, 8-13in, higher tx amplitude)
85 * < 0x150 = Setting 3 (back panel, 13-15in, higest tx amplitude)
[all …]
|
| /openbmc/linux/drivers/net/wireless/ath/ath10k/ |
| H A D | targaddrs.h | 1 /* SPDX-License-Identifier: ISC */
3 * Copyright (c) 2005-2011 Atheros Communications Inc.
4 * Copyright (c) 2011-2016 Qualcomm Atheros, Inc.
36 * Pointer to application-defined area, if any.
50 * General-purpose flag bits, similar to SOC_OPTION_* flags.
103 u32 hi_num_bpatch_streams; /* 0x70 -- unused */
124 * 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high
127 /* Pointer to extended board Data */
143 /* 0xbc - [31:0]: idle timeout in ms */
150 /* If non-zero, override values sent to Host in WMI_READY event. */
[all …]
|