| /openbmc/linux/drivers/zorro/ |
| H A D | zorro.ids | 18 0000 Golem RAM Box 2MB [RAM Expansion]
22 1300 Warp Engine [Accelerator, SCSI Host Adapter and RAM Expansion]
24 0200 Megamix 2000 [RAM Expansion]
36 0a00 A590/A2052/A2058/A2091 [RAM Expansion]
37 2000 A560 [RAM Expansion]
40 5000 A2620 68020 [Accelerator and RAM Expansion]
41 5100 A2630 68030 [Accelerator and RAM Expansion]
45 6100 A3000 Test Fixture [Miscellaneous Expansion Card]
51 0200 EXP8000 [RAM Expansion]
64 0100 AX2000 [RAM Expansion]
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/memory-controllers/ |
| H A D | intel,ixp4xx-expansion-bus-controller.yaml | 4 $id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-bus-controller.yaml#
7 title: Intel IXP4xx Expansion Bus Controller
10 The IXP4xx expansion bus controller handles access to devices on the
11 memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
24 - intel,ixp42x-expansion-bus-controller
25 - intel,ixp43x-expansion-bus-controller
26 - intel,ixp45x-expansion-bus-controller
27 - intel,ixp46x-expansion-bus-controller
31 description: Control registers for the expansion bus, these are not
32 inside the memory range handled by the expansion bus.
[all …]
|
| H A D | intel,ixp4xx-expansion-peripheral-props.yaml | 4 $id: http://devicetree.org/schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
7 title: Peripheral properties for Intel IXP4xx Expansion Bus
10 The IXP4xx expansion bus controller handles access to devices on the
11 memory-mapped expansion bus on the Intel IXP4xx family of system on chips,
44 description: The type of cycles to use on the expansion bus for this
75 description: Expansion bus uses only 8 bits. The default is to use
|
| /openbmc/u-boot/board/overo/ |
| H A D | overo.c | 113 * Description: This function checks for expansion board by checking I2C
168 printf("Recognized Summit expansion board (rev %d %s)\n", in misc_init_r()
176 printf("Recognized Tobi expansion board (rev %d %s)\n", in misc_init_r()
184 printf("Recognized Tobi Duo expansion board (rev %d %s)\n", in misc_init_r()
191 printf("Recognized Palo35 expansion board (rev %d %s)\n", in misc_init_r()
199 printf("Recognized Palo43 expansion board (rev %d %s)\n", in misc_init_r()
207 printf("Recognized Chestnut43 expansion board (rev %d %s)\n", in misc_init_r()
215 printf("Recognized Pinto expansion board (rev %d %s)\n", in misc_init_r()
221 printf("Recognized Gallop43 expansion board (rev %d %s)\n", in misc_init_r()
229 printf("Recognized Alto35 expansion board (rev %d %s)\n", in misc_init_r()
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/intel/socfpga/ |
| H A D | socfpga_cyclone5_chameleon96.dts | 73 /* On Low speed expansion */
79 /* On Low speed expansion */
89 /* On High speed expansion */
101 /* On High speed expansion */
107 /* On Low speed expansion */
113 /* On Low speed expansion */
119 /* On Low speed expansion */
|
| /openbmc/linux/arch/mips/include/uapi/asm/ |
| H A D | stat.h | 54 unsigned long st_pad0[3]; /* Reserved for st_dev expansion */
65 unsigned long st_pad1[3]; /* Reserved for st_rdev expansion */
74 unsigned long st_atime_nsec; /* Reserved for st_atime expansion */
77 unsigned long st_mtime_nsec; /* Reserved for st_mtime expansion */
80 unsigned long st_ctime_nsec; /* Reserved for st_ctime expansion */
95 unsigned int st_pad0[3]; /* Reserved for st_dev expansion */
106 unsigned int st_pad1[3]; /* Reserved for st_rdev expansion */
|
| /openbmc/linux/arch/mips/include/asm/mach-loongson2ef/cs5536/ |
| H A D | cs5536_pci.h | 36 /********** STANDARD PCI-2.2 EXPANSION ****************/
99 /* EXPANSION ROM BAR */
115 /*********** EXPANSION PCI REG ************************/
118 * ISA EXPANSION
125 * IDE EXPANSION
136 * ACC EXPANSION
141 * OHCI EXPANSION : INTTERUPT IS IMPLEMENTED BY THE OHCI
147 * EHCI EXPANSION
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | stih410-b2260.dts | 77 /* Low speed expansion connector */
83 /* Low speed expansion connector */
89 /* Low speed expansion connector */
96 /* Low speed expansion connector */
102 /* Low speed expansion connector */
108 /* high speed expansion connector */
115 /* high speed expansion connector */
128 /* high speed expansion connector */
|
| H A D | armada-8040-db.dts | 148 /* CON6 on CP0 expansion */
157 /* CON5 on CP0 expansion */
169 /* CON4 on CP0 expansion */
174 /* CON9 on CP0 expansion */
179 /* CON10 on CP0 expansion */
247 /* CON6 on CP1 expansion */
256 /* CON5 on CP1 expansion */
290 /* CON4 on CP1 expansion */
295 /* CON9 on CP1 expansion */
300 /* CON10 on CP1 expansion */
|
| /openbmc/linux/arch/arm/boot/dts/st/ |
| H A D | stih410-b2260.dts | 94 /* Low speed expansion connector */
105 /* Low speed expansion connector */
111 /* Low speed expansion connector */
118 /* Low speed expansion connector */
124 /* Low speed expansion connector */
130 /* high speed expansion connector */
137 /* high speed expansion connector */
150 /* high speed expansion connector */
|
| /openbmc/linux/arch/arm64/boot/dts/marvell/ |
| H A D | armada-8040-db.dts | 104 /* CON6 on CP0 expansion */
111 /* CON5 on CP0 expansion */
142 /* CON4 on CP0 expansion */
156 /* CON9 on CP0 expansion */
176 /* CON10 on CP0 expansion */
212 /* CON6 on CP1 expansion */
219 /* CON7 on CP1 expansion */
226 /* CON5 on CP1 expansion */
303 /* CON4 on CP1 expansion */
321 /* CON9 on CP1 expansion */
[all …]
|
| /openbmc/u-boot/arch/arm/mach-rockchip/rk3288/ |
| H A D | Kconfig | 50 also includes on-board eMMC and 2GB of SDRAM. Expansion connectors
59 includes on-board eMMC and 2GB of SDRAM. Expansion connectors
68 also includes on-board eMMC and 1GB of SDRAM. Expansion connectors
77 has 1 or 2 GiB SDRAM. Expansion connectors provide access to
95 2GB DDR3. Expansion connectors provide access to I2C, SPI, UART,
120 also includes on-board eMMC and 2GB of SDRAM. Expansion connectors
129 space for a real-time-clock battery. There is also an expansion
138 8GB eMMC and 2GB of SDRAM. Expansion connectors provide access to
|
| /openbmc/qemu/include/hw/arm/ |
| H A D | armsse.h | 44 * + QOM property "EXP_NUMIRQ" sets the number of expansion interrupts.
45 * (In hardware, the SSE-200 permits the number of expansion interrupts
62 * + Named GPIO inputs "EXP_IRQ" 0..n are the expansion interrupts for CPU 0,
64 * + Named GPIO inputs "EXP_CPU1_IRQ" 0..n are the expansion interrupts for
66 * + sysbus MMIO region 0 is the "AHB Slave Expansion" which allows
69 * Controlling up to 4 AHB expansion PPBs which a system using the IoTKit
76 * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit
83 * Controlling each of the 16 expansion MPCs which a system using the IoTKit
86 * Controlling each of the 16 expansion MSCs which a system using the IoTKit
|
| /openbmc/linux/drivers/mtd/maps/ |
| H A D | intel_vr_nor.c | 4 * An MTD map driver for a NOR flash bank on the Expansion Bus of the Intel
7 * The Vermilion Range Expansion Bus supports four chip selects, each of which
8 * has 64MiB of address space. The 2nd BAR of the Expansion Bus PCI Device
13 * (either 8 bits or 16 bits) is determined by reading the Expansion Bus Timing
49 /* Expansion Bus Configuration and Status Registers are in BAR 0 */
51 /* Expansion Bus Memory Window is BAR 1 */
142 dev_warn(&p->dev->dev, "Expansion Bus Chip Select 0 " in vr_nor_init_maps()
148 dev_warn(&p->dev->dev, "Expansion Bus Chip Select 0 " in vr_nor_init_maps()
|
| /openbmc/linux/Documentation/devicetree/bindings/ata/ |
| H A D | intel,ixp4xx-compact-flash.yaml | 15 device is always connected to the expansion bus of the IXP4xx SoCs using one
17 node must be placed inside a chip select node on the IXP4xx expansion bus.
38 - $ref: /schemas/memory-controllers/intel,ixp4xx-expansion-peripheral-props.yaml#
47 compatible = "intel,ixp43x-expansion-bus-controller", "syscon";
|
| /openbmc/openbmc/meta-openembedded/meta-filesystems/recipes-filesystems/zfs/zfs/ |
| H A D | aaf28a4630af60496c9d33db1d06a7d7d8983422.patch | 11 …./zfs-2.1.9/module/zfs/vdev_raidz_math_aarch64_neonx2.c:193:9: note: in expansion of macro 'GEN_X_…
14 …0/build/../zfs-2.1.9/module/zfs/vdev_raidz_math_impl.h:1360:9: note: in expansion of macro 'REC_PQ…
20 …./zfs-2.1.9/module/zfs/vdev_raidz_math_aarch64_neonx2.c:194:9: note: in expansion of macro 'GEN_X_…
23 …0/build/../zfs-2.1.9/module/zfs/vdev_raidz_math_impl.h:1360:9: note: in expansion of macro 'REC_PQ…
29 …./zfs-2.1.9/module/zfs/vdev_raidz_math_aarch64_neonx2.c:194:9: note: in expansion of macro 'GEN_X_…
32 …0/build/../zfs-2.1.9/module/zfs/vdev_raidz_math_impl.h:1360:9: note: in expansion of macro 'REC_PQ…
|
| /openbmc/qemu/qapi/ |
| H A D | machine-target.json | 33 # An enumeration of CPU model expansion types.
153 # option and global properties may affect expansion of CPU models.
154 # Using query-cpu-model-expansion while using these is not advised.
189 # migration-safe CPU model (see "static" CPU model expansion for
211 # option and global properties may affect expansion of CPU models.
212 # Using query-cpu-model-expansion while using these is not advised.
243 # The result of a cpu model expansion.
267 # @query-cpu-model-expansion:
289 # option and global properties may affect expansion of CPU models.
290 # Using query-cpu-model-expansion while using these is not advised.
[all …]
|
| /openbmc/bmcweb/redfish-core/schema/dmtf/json-schema-installed/ |
| H A D | PhysicalContext.json | 102 "ExpansionBay": "An expansion bay.",
103 "ExpansionSubsystem": "A group of expansion bays.",
143 …ansionBay": "This value shall indicate a location that provides for the expansion of functionality…
144 …"ExpansionSubsystem": "This value shall indicate a group of expansion bays and the devices install…
145 …"NetworkBay": "This value shall indicate a location that provides for the expansion of networking …
148 …"StorageBay": "This value shall indicate a location that provides for the expansion of storage fun…
|
| /openbmc/bmcweb/redfish-core/schema/dmtf/json-schema/ |
| H A D | PhysicalContext.json | 102 "ExpansionBay": "An expansion bay.",
103 "ExpansionSubsystem": "A group of expansion bays.",
143 …ansionBay": "This value shall indicate a location that provides for the expansion of functionality…
144 …"ExpansionSubsystem": "This value shall indicate a group of expansion bays and the devices install…
145 …"NetworkBay": "This value shall indicate a location that provides for the expansion of networking …
148 …"StorageBay": "This value shall indicate a location that provides for the expansion of storage fun…
|
| /openbmc/webui-vue/src/assets/styles/bmc/helpers/ |
| H A D | _motion.scss | 3 $duration--moderate-01: 150ms; //Micro-interactions, small expansion, short distance movements
4 $duration--moderate-02: 240ms; //Expansion, system communication, toast
5 $duration--slow-01: 400ms; //Large expansion, important system notifications
|
| /openbmc/phosphor-webui/app/common/styles/base/ |
| H A D | variables.scss | 3 $duration--moderate-01: 150ms; //Micro-interactions, small expansion, short distance movements
4 $duration--moderate-02: 240ms; //Expansion, system communication, toast
5 $duration--slow-01: 400ms; //Large expansion, important system notifications
|
| /openbmc/linux/include/linux/ |
| H A D | brcmphy.h | 89 #define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
90 #define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
91 #define MII_BCM54XX_EXP_SEL_TOP 0x0d00 /* TOP_MISC expansion register select */
93 #define MII_BCM54XX_EXP_SEL_WOL 0x0e00 /* Wake-on-LAN expansion select register */
94 #define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
95 #define MII_BCM54XX_EXP_SEL_ETC 0x0d00 /* Expansion register spare + 2k mem */
124 /* legacy access control via rdb/expansion register */
168 * Broadcom Multicolor LED configurations (expansion register 4)
236 * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17)
255 /* Top-MISC expansion registers */
|
| /openbmc/u-boot/arch/arm/mach-tegra/tegra210/ |
| H A D | Kconfig | 12 expansion modules.
21 a GPIO expansion header, and an analog audio jack.
30 port, SATA, PCIe, and two GPIO expansion headers.
|
| /openbmc/bmcweb/redfish-core/include/generated/enums/ |
| H A D | resource_block.hpp | 16 Expansion, enumerator
45 {ResourceBlockType::Expansion, "Expansion"},
|
| /openbmc/linux/arch/m68k/ |
| H A D | Kconfig.bus | 11 Say Y here to enable support for the "DIO" expansion bus used in
25 expansion cards in your Amiga that conform to the Amiga
27 expansion cards that do not fit in the Zorro slots but fit in e.g.
|