/openbmc/linux/Documentation/devicetree/bindings/display/ |
H A D | dsi-controller.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/display/dsi-controller.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Linus Walleij <linus.walleij@linaro.org> 26 reg-property set to the virtual channel number, usually there is just 33 clock-master: 42 "#address-cells": 45 "#size-cells": 49 "^panel@[0-3]$": [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/display/panel/ |
H A D | sony,acx424akp.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 15 - Linus Walleij <linus.walleij@linaro.org> 18 - $ref: panel-common.yaml# 23 - sony,acx424akp 24 - sony,acx424akm 26 reset-gpios: true 27 vddi-supply: 29 enforce-video-mode: true [all …]
|
/openbmc/linux/drivers/gpu/drm/panel/ |
H A D | panel-novatek-nt35560.c | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * MIPI-DSI Novatek NT35560-based panel controller. 6 * Sony ACX424AKM - a 480x854 AMOLED DSI panel 7 * Sony ACX424AKP - a 480x864 AMOLED DSI panel 9 * Copyright (C) Linaro Ltd. 2019-2021 11 * Based on code and know-how from Marcus Lorentzon 12 * Copyright (C) ST-Ericsson SA 2010 13 * Based on code and know-how from Johan Olson and Joakim Wesslen 23 #include <video/mipi_display.h> 77 * command mode using the maximum HS frequency. [all …]
|
H A D | panel-edp.c | 17 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 34 #include <video/display_timing.h> 35 #include <video/of_display_timing.h> 36 #include <video/videomode.h> 46 * struct panel_delay - Describes delays for a simple panel. 59 * hpd_absent. While that works, it's non-ideal. 68 * This is T3-max on eDP timing diagrams or the delay from power on 99 * // enforce prepare_to_enable min time 112 * video data. 114 * This is (T6-min + max(T7-max, T8-min)) on eDP timing diagrams or [all …]
|
/openbmc/linux/Documentation/driver-api/ |
H A D | device_link.rst | 17 Secondly, the driver core by default does not enforce any driver presence 57 device ``->probe`` callback or a boot-time PCI quirk. 61 ``->probe`` callback while the supplier hasn't started to probe yet: Had the 65 non-presence. [Note that it is valid to create a link from the consumer's 66 ``->probe`` callback while the supplier is still probing, but the consumer must 72 is added in the ``->probe`` callback of the supplier or consumer driver, it is 73 typically deleted in its ``->remove`` callback for symmetry. That way, if the 87 link is added from the consumer's ``->probe`` callback: ``DL_FLAG_RPM_ACTIVE`` 93 Similarly, when the device link is added from supplier's ``->probe`` callback, 125 :c:func:`device_link_add()` may cause the PM-runtime usage counter of the [all …]
|
/openbmc/linux/Documentation/admin-guide/media/ |
H A D | imx.rst | 1 .. SPDX-License-Identifier: GPL-2.0 3 i.MX Video Capture Driver 7 ------------ 15 - Image DMA Controller (IDMAC) 16 - Camera Serial Interface (CSI) 17 - Image Converter (IC) 18 - Sensor Multi-FIFO Controller (SMFC) 19 - Image Rotator (IRT) 20 - Video De-Interlacing or Combining Block (VDIC) 23 memory. Various dedicated DMA channels exist for both video capture and [all …]
|
/openbmc/linux/drivers/media/pci/cx18/ |
H A D | cx18-av-core.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 5 * Derived from cx25840-core.c 11 #include "cx18-driver.h" 12 #include "cx18-io.h" 13 #include "cx18-cards.h" 106 /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/ in cx18_av_init() 127 /* enable sleep mode - register appears to be read only... */ in cx18_av_initialize() 129 /* disable sleep mode */ in cx18_av_initialize() 159 /* video output drive strength */ in cx18_av_initialize() 162 /* reset video */ in cx18_av_initialize() [all …]
|
/openbmc/linux/Documentation/userspace-api/media/v4l/ |
H A D | ext-ctrls-camera.rst | 1 .. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later 3 .. _camera-controls: 13 .. _camera-control-id: 23 .. _v4l2-exposure-auto-type: 28 enum v4l2_exposure_auto_type - 37 .. flat-table:: 38 :header-rows: 0 39 :stub-columns: 0 41 * - ``V4L2_EXPOSURE_AUTO`` 42 - Automatic exposure time, automatic iris aperture. [all …]
|
/openbmc/linux/Documentation/gpu/ |
H A D | i915.rst | 17 ------------------------ 19 .. kernel-doc:: drivers/gpu/drm/i915/intel_runtime_pm.c 22 .. kernel-doc:: drivers/gpu/drm/i915/intel_runtime_pm.c 25 .. kernel-doc:: drivers/gpu/drm/i915/intel_uncore.c 29 ------------------ 31 .. kernel-doc:: drivers/gpu/drm/i915/i915_irq.c 34 .. kernel-doc:: drivers/gpu/drm/i915/i915_irq.c 37 .. kernel-doc:: drivers/gpu/drm/i915/i915_irq.c 40 .. kernel-doc:: drivers/gpu/drm/i915/i915_irq.c 43 Intel GVT-g Guest Support(vGPU) [all …]
|
/openbmc/linux/drivers/gpu/drm/xlnx/ |
H A D | zynqmp_kms.c | 1 // SPDX-License-Identifier: GPL-2.0 3 * ZynqMP DisplayPort Subsystem - KMS API 5 * Copyright (C) 2017 - 2021 Xilinx, Inc. 8 * - Hyun Woo Kwon <hyun.kwon@xilinx.com> 9 * - Laurent Pinchart <laurent.pinchart@ideasonboard.com> 47 return container_of(drm, struct zynqmp_dpsub_drm, dev)->dpsub; in to_zynqmp_dpsub() 50 /* ----------------------------------------------------------------------------- 61 if (!new_plane_state->crtc) in zynqmp_dpsub_plane_atomic_check() 64 crtc_state = drm_atomic_get_crtc_state(state, new_plane_state->crtc); in zynqmp_dpsub_plane_atomic_check() 80 struct zynqmp_dpsub *dpsub = to_zynqmp_dpsub(plane->dev); in zynqmp_dpsub_plane_atomic_disable() [all …]
|
/openbmc/bmcweb/redfish-core/schema/dmtf/json-schema/ |
H A D | ManagerNetworkProtocol.v1_10_1.json | 4 "$schema": "http://redfish.dmtf.org/schemas/v1/redfish-schema-v1.json", 5 …"copyright": "Copyright 2014-2024 DMTF. For the full DMTF copyright policy, see http://www.dmtf.or… 12 "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": { 28 "description": "The available OEM-specific actions for this resource.", 29 …"longDescription": "This property shall contain the available OEM-specific actions for this resour… 38 "longDescription": "This object shall contain the RFC3411-defined engine ID.", 40 "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": { 56 …described in item 3 of the snmpEngineID syntax of RFC3411. The full RFC3411-defined snmpEngineID … 57 "pattern": "^([A-Fa-f0-9]{2} ){0,27}[A-Fa-f0-9]{2}$", 66 "description": "The enterprise-specific method.", [all …]
|
/openbmc/bmcweb/redfish-core/schema/dmtf/json-schema-installed/ |
H A D | ManagerNetworkProtocol.v1_10_1.json | 4 "$schema": "http://redfish.dmtf.org/schemas/v1/redfish-schema-v1.json", 5 …"copyright": "Copyright 2014-2024 DMTF. For the full DMTF copyright policy, see http://www.dmtf.or… 12 "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": { 28 "description": "The available OEM-specific actions for this resource.", 29 …"longDescription": "This property shall contain the available OEM-specific actions for this resour… 38 "longDescription": "This object shall contain the RFC3411-defined engine ID.", 40 "^([a-zA-Z_][a-zA-Z0-9_]*)?@(odata|Redfish|Message)\\.[a-zA-Z_][a-zA-Z0-9_]*$": { 56 …described in item 3 of the snmpEngineID syntax of RFC3411. The full RFC3411-defined snmpEngineID … 57 "pattern": "^([A-Fa-f0-9]{2} ){0,27}[A-Fa-f0-9]{2}$", 66 "description": "The enterprise-specific method.", [all …]
|
/openbmc/linux/arch/x86/ |
H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0 4 bool "64-bit kernel" if "$(ARCH)" = "x86" 7 Say yes to build a 64-bit kernel - formerly known as x86_64 8 Say no to build a 32-bit kernel - formerly known as i386 13 # Options that are inherently 32-bit kernel only: 27 # Options that are inherently 64-bi [all...] |
/openbmc/linux/Documentation/networking/ |
H A D | udplite.rst | 1 .. SPDX-License-Identifier: GPL-2.0 4 The UDP-Lite protocol (RFC 3828) 8 UDP-Lite is a Standards-Track IETF transport protocol whose characteristic 9 is a variable-length checksum. This has advantages for transport of multimedia 10 (video, VoIP) over wireless networks, as partly damaged packets can still be 14 For in-depth information, you can consult: 16 - The UDP-Lite Homepage: 17 http://web.archive.org/web/%2E/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/ 21 - The UDP-Lite HOWTO on 22 …http://web.archive.org/web/%2E/http://www.erg.abdn.ac.uk/users/gerrit/udp-lite/files/UDP-Lite-HOWT… [all …]
|
/openbmc/linux/drivers/clk/ |
H A D | clk-ast2600.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 5 #define pr_fmt(fmt) "clk-ast2600: " fmt 14 #include <dt-bindings/clock/ast2600-clock.h> 16 #include "clk-aspeed.h" 20 * explicitly-configured clocks (ASPEED_CLK_HPLL and up). 82 * IP. This allows us to enforce the ordering: 94 * handled by using -1 as the index for the reset, and the consumer must 104 [ASPEED_CLK_GATE_MCLK] = { 0, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ 105 [ASPEED_CLK_GATE_ECLK] = { 1, 6, "eclk-gate", "eclk", 0 }, /* Video Engine */ 106 [ASPEED_CLK_GATE_GCLK] = { 2, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ [all …]
|
/openbmc/u-boot/board/kosagi/novena/ |
H A D | novena_spl.c | 1 // SPDX-License-Identifier: GPL-2.0+ 12 #include <asm/arch/mx6-ddr.h> 13 #include <asm/arch/mx6-pins.h> 16 #include <asm/mach-imx/boot_mode.h> 17 #include <asm/mach-imx/iomux-v3.h> 18 #include <asm/mach-imx/mxc_i2c.h> 25 #include <asm/arch/mx6-ddr.h> 132 * Use imx6 internal pull-ups to drive PHY mode pins during PHY reset in novena_spl_setup_iomux_enet() 133 * de-assertion. The intention is to use weak signal drivers (pull-ups) in novena_spl_setup_iomux_enet() 148 /* De-assert Ethernet PHY nRST */ in novena_spl_setup_iomux_enet() [all …]
|
/openbmc/linux/Documentation/admin-guide/ |
H A D | kernel-parameters.txt | 5 force -- enable ACPI if default was off 6 on -- enable ACPI but allow fallback to DT [arm64,riscv64] 7 off -- disable ACPI if default was on 8 noirq -- do not use ACPI for IRQ routing 9 strict -- Be less tolerant of platforms that are not 11 rsdt -- prefer RSDT over (default) XSDT 12 copy_dsdt -- copy DSDT to memory 25 { vendor | video | native | none } 26 If set to vendor, prefer vendor-specific driver 28 of the ACPI video.ko driver. [all …]
|
/openbmc/linux/drivers/gpu/drm/amd/display/modules/freesync/ |
H A D | freesync.c | 2 * Copyright 2016-2023 Advanced Micro Devices, Inc. 38 /* Threshold to exit/exit BTR (to avoid frequent enter-exits at the lower limit) */ 71 core_freesync->dc = dc; in mod_freesync_create() 72 return &core_freesync->public; in mod_freesync_create() 117 * 10000) * stream->timing.h_total, in calc_duration_in_us_from_v_total() 118 stream->timing.pix_clk_100hz)); in calc_duration_in_us_from_v_total() 135 frame_duration_in_ns) * (stream->timing.pix_clk_100hz / 10)), in mod_freesync_calc_v_total_from_refresh() 136 stream->timing.h_total) + 500000, 1000000); in mod_freesync_calc_v_total_from_refresh() 139 if (v_total < stream->timing.v_total) { in mod_freesync_calc_v_total_from_refresh() 140 ASSERT(v_total < stream->timing.v_total); in mod_freesync_calc_v_total_from_refresh() [all …]
|
/openbmc/linux/drivers/media/platform/ti/omap3isp/ |
H A D | isppreview.c | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * TI OMAP3 ISP driver - Preview module 26 { /* RGB-RGB Matrix */ 38 {-38, -75, 112}, 39 {112, -94 , -18} 85 * ------------------------------------------------------------- 125 * Default Gamma Correction Table - All components 146 * preview_config_luma_enhancement - Configure the Luminance Enhancement table 153 const struct omap3isp_prev_luma *yt = ¶ms->luma; in preview_config_luma_enhancement() 159 isp_reg_writel(isp, yt->table[i], in preview_config_luma_enhancement() [all …]
|
/openbmc/u-boot/drivers/video/ |
H A D | cfb_console.c | 1 // SPDX-License-Identifier: GPL-2.0+ 12 * At the moment only the 8x16 font is tested and the font fore- and 20 * Character output goes to a memory-mapped video 21 * framebuffer with little or big-endian organisation. 29 * VIDEO_FB_LITTLE_ENDIAN - framebuffer organisation default: big endian 30 * VIDEO_HW_RECTFILL - graphic driver supports hardware rectangle fill 31 * VIDEO_HW_BITBLT - graphic driver supports hardware bit blt 35 * VIDEO_VISIBLE_COLS - x resolution 36 * VIDEO_VISIBLE_ROWS - y resolution 37 * VIDEO_PIXEL_SIZE - storage size in byte per pixel [all …]
|
/openbmc/linux/drivers/video/fbdev/ |
H A D | broadsheetfb.c | 2 * broadsheetfb.c -- FB driver for E-Ink Broadsheet controller 35 #include <video/broadsheetfb.h> 121 par->board->set_ctl(par, BS_WR, 0); in broadsheet_gpio_issue_data() 122 par->board->set_hdb(par, data); in broadsheet_gpio_issue_data() 123 par->board->set_ctl(par, BS_WR, 1); in broadsheet_gpio_issue_data() 128 par->board->set_ctl(par, BS_DC, 0); in broadsheet_gpio_issue_cmd() 134 par->board->wait_for_rdy(par); in broadsheet_gpio_send_command() 136 par->board->set_ctl(par, BS_CS, 0); in broadsheet_gpio_send_command() 138 par->board->set_ctl(par, BS_DC, 1); in broadsheet_gpio_send_command() 139 par->board->set_ctl(par, BS_CS, 1); in broadsheet_gpio_send_command() [all …]
|
/openbmc/linux/drivers/gpu/drm/amd/amdgpu/ |
H A D | amdgpu_drv.c | 57 * - 3.0.0 - initial driver 58 * - 3.1.0 - allow reading more status registers (GRBM, SRBM, SDMA, CP) 59 * - 3.2.0 - GFX8: Uses EOP_TC_WB_ACTION_EN, so UMDs don't have to do the same 61 * - 3.3.0 - Add VM support for UVD on supported hardware. 62 * - 3.4.0 - Add AMDGPU_INFO_NUM_EVICTIONS. 63 * - 3.5.0 - Add support for new UVD_NO_OP register. 64 * - 3.6.0 - kmd involves use CONTEXT_CONTROL in ring buffer. 65 * - 3.7.0 - Add support for VCE clock list packet 66 * - 3.8.0 - Add support raster config init in the kernel 67 * - 3.9.0 - Add support for memory query info about VRAM and GTT. [all …]
|
/openbmc/linux/drivers/gpu/drm/ |
H A D | drm_bridge.c | 17 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL 25 #include <linux/media-bus-format.h> 50 * [ CRTC ---> ] Encoder ---> Bridge A ---> Bridge B 76 * functions to perform mode validation and fixup (through 77 * drm_bridge_chain_mode_valid() and drm_atomic_bridge_chain_check()), mode 88 * drm_atomic_helper_commit_modeset_disables() (either directly in hand-rolled 89 * commit check and commit tail handlers, or through the higher-level 98 * connector-related operations exposed by the bridge (see the overview 110 * - The upstream driver doesn't use the component framework and isn't a 111 * MIPI-DSI host. In this case, the bridge driver will probe at some [all …]
|
/openbmc/linux/drivers/media/i2c/ |
H A D | mt9m111.c | 1 // SPDX-License-Identifier: GPL-2.0-only 14 #include <linux/v4l2-mediabus.h> 18 #include <media/v4l2-async.h> 19 #include <media/v4l2-common.h> 20 #include <media/v4l2-ctrls.h> 21 #include <media/v4l2-device.h> 22 #include <media/v4l2-event.h> 23 #include <media/v4l2-fwnode.h> 245 /* user point of view - 0: falling 1: rising edge */ 292 return mt9m111->fmt; in mt9m111_find_datafmt() [all …]
|
/openbmc/linux/drivers/staging/media/atomisp/pci/ |
H A D | sh_css_internal.h | 1 /* SPDX-License-Identifier: GPL-2.0 */ 56 * TODO: Enforce the limitation above. 130 #define CALC_ALIGNMENT_MEMBER(x, y) (CEIL_MUL(x, y) - x) 201 /* Note that the struct below should only consist of ia_css_ptr-es 347 * The DMA software-mask, 350 * Bit 15...08: reading-request enabling bits for DMA channel 7..0 351 * Bit 07...00: writing-request enabling bits for DMA channel 7..0 378 host (true) or when they are passed to the preview/video pipe 386 set[SH_CSS_MAX_IF_CONFIGS]; /* CSI-2 port is used as index. */ 410 ((SH_CSS_PIPE_CONFIG_SAMPLE_PARAMS << SH_CSS_MAX_SP_THREADS) - 1) [all …]
|