| /openbmc/linux/drivers/scsi/qla2xxx/ |
| H A D | qla_devtbl.h | 1 /* SPDX-License-Identifier: GPL-2.0 */
8 "QLA2340", "133MHz PCI-X to 2Gb FC, Single Channel", /* 0x100 */
9 "QLA2342", "133MHz PCI-X to 2Gb FC, Dual Channel", /* 0x101 */
10 "QLA2344", "133MHz PCI-X to 2Gb FC, Quad Channel", /* 0x102 */
11 "QCP2342", "cPCI to 2Gb FC, Dual Channel", /* 0x103 */
13 "QSB2342", "SBUS to 2Gb FC, Dual Channel", /* 0x105 */
14 "QLA2310", "Sun 66MHz PCI-X to 2Gb FC, Single Channel", /* 0x106 */
15 "QLA2332", "Sun 66MHz PCI-X to 2Gb FC, Single Channel", /* 0x107 */
16 "QCP2332", "Sun cPCI to 2Gb FC, Dual Channel", /* 0x108 */
18 "QLA2342", "Sun 133MHz PCI-X to 2Gb FC, Dual Channel", /* 0x10a */
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/panel/ |
| H A D | advantech,idk-2121wr.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/display/panel/advantech,idk-2121wr.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Advantech IDK-2121WR 21.5" Full-HD dual-LVDS panel
10 - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
11 - Thierry Reding <thierry.reding@gmail.com>
14 The IDK-2121WR from Advantech is a Full-HD dual-LVDS panel.
15 A dual-LVDS interface is a dual-link connection with even pixels traveling
20 dual-lvds-odd-pixels or dual-lvds-even-pixels).
[all …]
|
| /openbmc/linux/include/linux/regulator/ |
| H A D | da9121.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * DA9121 Single-channel dual-phase 10A buck converter
4 * DA9130 Single-channel dual-phase 10A buck converter (Automotive)
5 * DA9217 Single-channel dual-phase 6A buck converter
6 * DA9122 Dual-channel single-phase 5A buck converter
7 * DA9131 Dual-channel single-phase 5A buck converter (Automotive)
8 * DA9220 Dual-channel single-phase 3A buck converter
9 * DA9132 Dual-channel single-phase 3A buck converter (Automotive)
|
| /openbmc/linux/drivers/gpu/drm/display/ |
| H A D | drm_dp_dual_mode_helper.c | 35 * DOC: dp dual mode helpers
37 * Helper functions to deal with DP dual mode (aka. DP++) adaptors.
44 * I2C-over-AUX. Source devices may choose to implement either of these
51 * drm_dp_dual_mode_read - Read from the DP dual mode adaptor register(s)
57 * Reads @size bytes from the DP dual mode adaptor registers
69 * As sub-addressing is not supported by all adaptors, in drm_dp_dual_mode_read()
94 return -ENOMEM; in drm_dp_dual_mode_read()
108 return -EPROTO; in drm_dp_dual_mode_read()
115 * drm_dp_dual_mode_write - Write to the DP dual mode adaptor register(s)
121 * Writes @size bytes to the DP dual mode adaptor registers
[all …]
|
| /openbmc/linux/drivers/media/pci/cx88/ |
| H A D | cx88-dsp.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later
9 #include "cx88-reg.h"
77 return -int_cos(x - INT_PI); in int_cos()
80 return -int_cos(INT_PI / 2 - (x % (INT_PI / 2))); in int_cos()
89 ret = 32768 - t2 + t4 - t6 + t8; in int_cos()
108 s32 s = x[i] + ((s64)coeff * s_prev / 32768) - s_prev2; in int_goertzel()
114 tmp = (s64)s_prev2 * s_prev2 + (s64)s_prev * s_prev - in int_goertzel()
143 x += (N - 192); in noise_magnitude()
147 freq_step = (freq_end - freq_start) / (samples - 1); in noise_magnitude()
159 s32 carrier, stereo, dual, noise; in detect_a2_a2m_eiaj() local
[all …]
|
| /openbmc/linux/arch/arm/boot/dts/aspeed/ |
| H A D | aspeed-bmc-ibm-rainier-4u.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later
3 /dts-v1/;
5 #include "aspeed-bmc-ibm-rainier.dts"
12 power-supply@6a {
17 power-supply@6b {
24 /delete-property/ maxim,fan-dual-tach;
28 /delete-property/ maxim,fan-dual-tach;
32 /delete-property/ maxim,fan-dual-tach;
36 /delete-property/ maxim,fan-dual-tach;
40 /delete-property/ maxim,fan-dual-tach;
[all …]
|
| /openbmc/smbios-mdr/include/ |
| H A D | cpu.hpp | 8 // http://www.apache.org/licenses/LICENSE-2.0
77 {0x1b, "K6-2"},
78 {0x1c, "K6-3"},
81 {0x1f, "K6-2+"},
106 {0x38, "AMD Turion II Ultra Dual-Core Mobile M Processor Family"},
107 {0x39, "AMD Turion II Dual-Core Mobile M Processor Family"},
108 {0x3a, "AMD Athlon II Dual-Core M Processor Family"},
120 {0x46, "AMD C-Series Processor"},
121 {0x47, "AMD E-Series Processor"},
122 {0x48, "AMD A-Series Processor"},
[all …]
|
| /openbmc/linux/drivers/usb/cdns3/ |
| H A D | Kconfig | 8 dual-role controller.
9 It supports: dual-role switch, Host-only, and Peripheral-only.
17 tristate "Cadence USB3 Dual-Role Controller"
20 Say Y here if your system has a Cadence USB3 dual-role controller.
21 It supports: dual-role switch, Host-only, and Peripheral-only.
34 Cadence USBSS-DEV driver.
51 tristate "Cadence USB3 support on PCIe-based platforms"
59 be dynamically linked and module will be called cdns3-pci.ko
91 be dynamically linked and module will be called cdns3-starfive.ko
97 tristate "Cadence CDNSP Dual-Role Controller"
[all …]
|
| /openbmc/linux/drivers/net/wireless/intel/iwlwifi/cfg/ |
| H A D | 7000.c | 1 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
3 * Copyright (C) 2012-2014, 2018-2020, 2023 Intel Corporation
4 * Copyright (C) 2013-2014 Intel Mobile Communications GmbH
9 #include "iwl-config.h"
37 #define IWL7260_FW_PRE "iwlwifi-7260"
38 #define IWL7260_MODULE_FIRMWARE(api) IWL7260_FW_PRE "-" __stringify(api) ".ucode"
40 #define IWL3160_FW_PRE "iwlwifi-3160"
41 #define IWL3160_MODULE_FIRMWARE(api) IWL3160_FW_PRE "-" __stringify(api) ".ucode"
43 #define IWL3168_FW_PRE "iwlwifi-3168"
44 #define IWL3168_MODULE_FIRMWARE(api) IWL3168_FW_PRE "-" __stringify(api) ".ucode"
[all …]
|
| /openbmc/linux/Documentation/admin-guide/media/ |
| H A D | dvb-usb-cxusb-cardlist.rst | 1 .. SPDX-License-Identifier: GPL-2.0
3 dvb-usb-cxusb cards list
8 .. flat-table::
9 :header-rows: 1
11 :stub-columns: 0
13 * - Card name
14 - USB IDs
15 * - AVerMedia AVerTVHD Volar (A868R)
16 -
17 * - Conexant DMB-TH Stick
[all …]
|
| H A D | cx23885-cardlist.rst | 1 .. SPDX-License-Identifier: GPL-2.0
8 .. flat-table::
9 :header-rows: 1
11 :stub-columns: 0
13 * - Card number
14 - Card name
15 - PCI subsystem IDs
17 * - 0
18 - UNKNOWN/GENERIC
19 - 0070:3400
[all …]
|
| /openbmc/linux/drivers/clk/meson/ |
| H A D | clk-dualdiv.c | 1 // SPDX-License-Identifier: GPL-2.0
9 * The AO Domain embeds a dual/divider to generate a more precise
10 * 32,768KHz clock for low-power suspend mode and CEC.
13 * | Div1 |-| Cnt1 |
15 * -| ______ ______ X--> Out
17 * | Div2 |-| Cnt2 |
20 * The dividing can be switched to single or dual, with a counter
24 #include <linux/clk-provider.h>
27 #include "clk-regmap.h"
28 #include "clk-dualdiv.h"
[all …]
|
| /openbmc/linux/drivers/gpu/drm/imx/ipuv3/ |
| H A D | imx-ldb.c | 1 // SPDX-License-Identifier: GPL-2.0+
3 * i.MX drm driver - LVDS display bridge
11 #include <linux/media-bus-format.h>
13 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
34 #include "imx-drm.h"
36 #define DRIVER_NAME "imx-ldb"
82 return container_of(c, struct imx_ldb_encoder, connector)->channel; in con_to_imx_ldb_ch()
87 return container_of(e, struct imx_ldb_encoder, encoder)->channel; in enc_to_imx_ldb_ch()
111 struct imx_ldb *ldb = imx_ldb_ch->ldb; in imx_ldb_ch_set_bus_format()
112 int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN; in imx_ldb_ch_set_bus_format() local
[all …]
|
| /openbmc/linux/Documentation/fb/ |
| H A D | viafb.rst | 6 --------
15 ---------------
34 ----------------------
47 - 640x480 (default)
48 - 720x480
49 - 800x600
50 - 1024x768
53 - 8, 16, 32 (default:32)
56 - 60, 75, 85, 100, 120 (default:60)
59 - 0 : expansion (default)
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/display/bridge/ |
| H A D | thine,thc63lvd1024.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jacopo Mondi <jacopo+renesas@jmondi.org>
11 - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
14 The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS
15 streams to parallel data outputs. The chip supports single/dual input/output
19 Single or dual operation mode, output data mapping and DDR output modes are
30 The device can operate in single or dual input and output modes.
33 and port@1 shall not contain any endpoint. In dual input mode,
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/connector/ |
| H A D | usb-connector.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only
3 ---
4 $id: http://devicetree.org/schemas/connector/usb-connector.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Rob Herring <robh@kernel.org>
20 - enum:
21 - usb-a-connector
22 - usb-b-connector
23 - usb-c-connector
25 - items:
[all …]
|
| /openbmc/linux/Documentation/process/ |
| H A D | license-rules.rst | 1 .. SPDX-License-Identifier: GPL-2.0
9 License version 2 only (GPL-2.0), as provided in LICENSES/preferred/GPL-2.0,
11 LICENSES/exceptions/Linux-syscall-note, as described in the COPYING file.
19 which is required to be compatible with the GPL-2.0::
21 GPL-1.0+ : GNU General Public License v1.0 or later
22 GPL-2.0+ : GNU General Public License v2.0 or later
23 LGPL-2.0 : GNU Library General Public License v2 only
24 LGPL-2.0+ : GNU Library General Public License v2 or later
25 LGPL-2.1 : GNU Lesser General Public License v2.1 only
26 LGPL-2.1+ : GNU Lesser General Public License v2.1 or later
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | armada-8020.dtsi | 4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPLv2 or the X11 license, at your option. Note that this dual
44 * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
48 #include "armada-ap806-dual.dtsi"
49 #include "armada-cp110-master.dtsi"
50 #include "armada-cp110-slave.dtsi"
54 compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
55 "marvell,armada-ap806";
|
| /openbmc/linux/Documentation/devicetree/bindings/pci/ |
| H A D | faraday,ftpci100.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Linus Walleij <linus.walleij@linaro.org>
15 plain and dual PCI. The plain version embeds a cascading interrupt controller
16 into the host bridge. The dual version routes the interrupts to the host
21 The plain variant has 128MiB of non-prefetchable memory space, whereas the
22 "dual" variant has 64MiB. Take this into account when describing the ranges.
26 The "dual" variant will get INT A, B, C, D from the system interrupt controller
27 and should point to respective interrupt in that controller in its interrupt-map.
[all …]
|
| /openbmc/u-boot/doc/SPI/ |
| H A D | status.txt | 5 -
8 - sf_probe.c: SPI flash probing code.
9 - sf_ops.c: SPI flash operations code.
10 - sf.c: SPI flash interface, which interacts controller driver.
11 - Bank Address Register (Accessing flashes > 16Mbytes in 3-byte addressing)
12 - Added memory_mapped support for read operations.
13 - Common probe support for all supported flash vendors except, ramtron.
14 - Extended read commands support(dual read, dual IO read)
15 - Quad Page Program support.
16 - Quad Read support(quad fast read, quad IO read)
[all …]
|
| /openbmc/linux/drivers/gpu/drm/ |
| H A D | drm_of.c | 1 // SPDX-License-Identifier: GPL-2.0-only
5 #include <linux/media-bus-format.h>
25 * drm_of_crtc_port_mask - find the mask of a registered CRTC by port OF node
39 if (tmp->port == port) in drm_of_crtc_port_mask()
50 * drm_of_find_possible_crtcs - find the possible CRTCs for an encoder port
83 * drm_of_component_match_add - Add a component helper OF node match rule
101 * drm_of_component_probe - Generic probe function for a component based master
121 if (!dev->of_node) in drm_of_component_probe()
122 return -EINVAL; in drm_of_component_probe()
129 port = of_parse_phandle(dev->of_node, "ports", i); in drm_of_component_probe()
[all …]
|
| /openbmc/linux/drivers/usb/dwc2/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
10 Say Y here if your system has a Dual Role Hi-Speed USB
18 dwc2_platform.ko. For all modes(host, gadget and dual-role), there
33 The Designware USB2.0 high-speed host controller
35 driver to operate in Host-only mode.
37 comment "Gadget/Dual-role mode requires USB Gadget support to be enabled"
43 The Designware USB2.0 high-speed gadget controller
45 driver to operate in Peripheral-only mode. This option requires
49 bool "Dual Role mode"
52 Select this option if you want the driver to work in a dual-role
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/usb/ |
| H A D | mediatek,mtu3.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Chunfeng Yun <chunfeng.yun@mediatek.com>
14 - $ref: usb-drd.yaml
23 - enum:
24 - mediatek,mt2712-mtu3
25 - mediatek,mt8173-mtu3
26 - mediatek,mt8183-mtu3
27 - mediatek,mt8186-mtu3
[all …]
|
| H A D | fsl-usb.txt | 9 - compatible : Should be "fsl-usb2-mph" for multi port host USB
10 controllers, or "fsl-usb2-dr" for dual role USB controllers
11 or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121.
13 also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132).
14 - phy_type : For multi port host USB controllers, should be one of
15 "ulpi", or "serial". For dual role USB controllers, should be
17 - reg : Offset and length of the register set for the device
18 - port0 : boolean; if defined, indicates port0 is connected for
19 fsl-usb2-mph compatible controllers. Either this property or
20 "port1" (or both) must be defined for "fsl-usb2-mph" compatible
[all …]
|
| /openbmc/linux/drivers/staging/sm750fb/ |
| H A D | readme | 4 - dual display
5 - 2D acceleration
6 - 16MB integrated video memory
11 insmod ./sm750fb.ko g_option="1280x1024-8@60"
17 dual frame buffer for driver with "dual" parameter
18 insmod ./sm750fb.ko g_option="dual,800x600:1024x768"
23 1) if you build the driver with built-in method, the parameter
37 and this driver will use fb1, fb2. In that case, you need to configure your X-server
|