| /openbmc/u-boot/arch/arm/dts/ |
| H A D | r8a7794-silk.dts | 1 // SPDX-License-Identifier: GPL-2.0 6 * Copyright (C) 2014-2015 Renesas Solutions Corp. 7 * Copyright (C) 2014-2015 Cogent Embedded, Inc. 11 * SSI-AK4643 13 * SW1: 2-1: AK4643 14 * 2-3: ADV7511 21 /dts-v1/; 23 #include <dt-bindings/gpio/gpio.h> 24 #include <dt-bindings/input/input.h> 38 stdout-path = "serial0:115200n8"; [all …]
|
| H A D | imx7s-warp.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 /dts-v1/; 9 #include <dt-bindings/input/input.h> 14 compatible = "warp,imx7s-warp", "fsl,imx7s"; 24 gpio-keys { 25 compatible = "gpio-keys"; 26 pinctrl-0 = <&pinctrl_gpio>; 33 wakeup-source; 37 reg_brcm: regulator-brcm { 38 compatible = "regulator-fixed"; [all …]
|
| H A D | am437x-sk-evm.dts | 2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ 11 /dts-v1/; 14 #include <dt-bindings/pinctrl/am43xx.h> 15 #include <dt-bindings/pwm/pwm.h> 16 #include <dt-bindings/gpio/gpio.h> 17 #include <dt-bindings/input/input.h> 21 compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43"; 28 stdout-path = &uart0; 29 tick-timer = &timer2; 33 compatible = "pwm-backlight"; [all …]
|
| H A D | imx6qdl-sabreauto.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/input/input.h> 11 stdout-path = &uart4; 19 compatible = "gpio-leds"; 20 pinctrl-names = "default"; 21 pinctrl-0 = <&pinctrl_gpio_leds>; 25 gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; 29 gpio-keys { 30 compatible = "gpio-keys"; [all …]
|
| H A D | r8a7790-lager.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2013-2014 Renesas Solutions Corp. 7 * Copyright (C) 2015-2016 Renesas Electronics Corporation 11 * SSI-AK4643 38 /dts-v1/; 40 #include <dt-bindings/gpio/gpio.h> 41 #include <dt-bindings/input/input.h> 60 stdout-path = "serial0:115200n8"; 74 #address-cells = <1>; 75 #size-cells = <1>; [all …]
|
| H A D | ulcb.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car Gen3 ULCB board 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/input/input.h> 13 model = "Renesas R-Car Gen3 ULCB board"; 21 stdout-path = "serial0:115200n8"; 24 audio_clkout: audio-clkout { 27 * but needed to avoid cs2000/rcar_sound probe dead-lock 29 compatible = "fixed-clock"; 30 #clock-cells = <0>; [all …]
|
| H A D | r8a7791-koelsch.dts | 1 // SPDX-License-Identifier: GPL-2.0 6 * Copyright (C) 2013-2014 Renesas Solutions Corp. 11 * SSI-AK4643 38 /dts-v1/; 40 #include <dt-bindings/gpio/gpio.h> 41 #include <dt-bindings/input/input.h> 60 stdout-path = "serial0:115200n8"; 74 #address-cells = <1>; 75 #size-cells = <1>; 79 compatible = "gpio-keys"; [all …]
|
| H A D | r8a7793-gose.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2014-2015 Renesas Electronics Corporation 9 * SSI-AK4643 36 /dts-v1/; 38 #include <dt-bindings/gpio/gpio.h> 39 #include <dt-bindings/input/input.h> 56 stdout-path = "serial0:115200n8"; 64 gpio-keys { 65 compatible = "gpio-keys"; 67 key-1 { [all …]
|
| H A D | omap3-beagle-xm.dts | 2 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ 8 /dts-v1/; 14 compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; 18 cpu0-supply = <&vcc>; 34 compatible = "gpio-leds"; 38 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ 39 linux,default-trigger = "heartbeat"; 44 gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ 45 linux,default-trigger = "mmc0"; 50 compatible = "pwm-leds"; [all …]
|
| H A D | rk3288-veyron-jerry.dts | 1 // SPDX-License-Identifier: GPL-2.0 8 /dts-v1/; 9 #include "rk3288-veyron-chromebook.dtsi" 10 #include "cros-ec-sbs.dtsi" 14 compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", 15 "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", 16 "google,veyron-jerry-rev3", "google,veyron-jerry", 20 stdout-path = &uart2; 23 panel_regulator: panel-regulator { 24 compatible = "regulator-fixed"; [all …]
|
| H A D | omap3-beagle.dts | 2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ 8 /dts-v1/; 14 compatible = "ti,omap3-beagle", "ti,omap3"; 18 cpu0-supply = <&vcc>; 33 compatible = "gpio-leds"; 41 gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */ 42 linux,default-trigger = "heartbeat"; 47 gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */ 48 linux,default-trigger = "mmc0"; 54 compatible = "regulator-fixed"; [all …]
|
| H A D | imx6sl-evk.dts | 9 /dts-v1/; 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/input/input.h> 17 compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; 24 compatible = "pwm-backlight"; 26 brightness-levels = <0 4 8 16 32 64 128 255>; 27 default-brightness-level = <6>; 31 compatible = "gpio-leds"; 32 pinctrl-names = "default"; 33 pinctrl-0 = <&pinctrl_led>; [all …]
|
| H A D | tegra124-nyan.dtsi | 1 #include <dt-bindings/input/input.h> 19 vdd-supply = <&vdd_3v3_hdmi>; 20 pll-supply = <&vdd_hdmi_pll>; 21 hdmi-supply = <&vdd_5v0_hdmi>; 23 nvidia,ddc-i2c-bus = <&hdmi_ddc>; 24 nvidia,hpd-gpio = 36 vdd-supply = <&vdd_3v3_panel>; 52 clock-frequency = <100000>; 54 acodec: audio-codec@10 { 57 interrupt-parent = <&gpio>; [all …]
|
| H A D | logicpd-som-lv.dtsi | 7 #include <dt-bindings/input/input.h> 12 cpu0-supply = <&vcc>; 22 compatible = "regulator-fixed"; 23 regulator-name = "vwl1271"; 24 regulator-min-microvolt = <1800000>; 25 regulator-max-microvolt = <1800000>; 27 startup-delay-us = <70000>; 28 enable-active-high; 29 vin-supply = <&vaux3>; 34 compatible = "usb-nop-xceiv"; [all …]
|
| H A D | salvator-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for common parts of Salvator-X board variants 5 * Copyright (C) 2015-2016 Renesas Electronics Corp. 9 * SSI-AK4613 31 #include <dt-bindings/gpio/gpio.h> 42 stdout-path = "serial0:115200n8"; 45 audio_clkout: audio-clkout { 48 * but needed to avoid cs2000/rcar_sound probe dead-lock 50 compatible = "fixed-clock"; 51 #clock-cells = <0>; [all …]
|
| H A D | rk3288.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/interrupt-controller/irq.h> 5 #include <dt-bindings/interrupt-controller/arm-gic.h> 6 #include <dt-bindings/pinctrl/rockchip.h> 7 #include <dt-bindings/clock/rk3288-cru.h> 8 #include <dt-bindings/power-domain/rk3288.h> 9 #include <dt-bindings/thermal/thermal.h> 10 #include <dt-bindings/video/rk3288.h> 16 interrupt-parent = <&gic>; [all …]
|
| H A D | tegra124-apalis.dts | 4 * This file is dual-licensed: you can use it either under the terms 42 /dts-v1/; 44 #include <dt-bindings/input/input.h> 49 compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1", 73 stdout-path = "serial0:115200n8"; 80 pcie-controller@01003000 { 82 avddio-pex-supply = <&vdd_1v05>; 83 avdd-pex-pll-supply = <&vdd_1v05>; 84 avdd-pll-erefe-supply = <&avdd_1v05>; 85 dvddio-pex-supply = <&vdd_1v05>; [all …]
|
| H A D | r8a7792.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/clock/r8a7792-cpg-mssr.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/power/r8a7792-sysc.h> 15 #address-cells = <2>; 16 #size-cells = <2>; 38 compatible = "fixed-clock"; 39 #clock-cells = <0>; 41 clock-frequency = <0>; [all …]
|
| H A D | r8a7791.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2013-2015 Renesas Electronics Corporation 6 * Copyright (C) 2013-2014 Renesas Solutions Corp. 10 #include <dt-bindings/clock/r8a7791-cpg-mssr.h> 11 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 #include <dt-bindings/interrupt-controller/irq.h> 13 #include <dt-bindings/power/r8a7791-sysc.h> 17 #address-cells = <2>; 18 #size-cells = <2>; 45 compatible = "fixed-clock"; [all …]
|
| H A D | r8a7790.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 * Copyright (C) 2013-2014 Renesas Solutions Corp. 10 #include <dt-bindings/clock/r8a7790-cpg-mssr.h> 11 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 #include <dt-bindings/interrupt-controller/irq.h> 13 #include <dt-bindings/power/r8a7790-sysc.h> 17 #address-cells = <2>; 18 #size-cells = <2>; 46 compatible = "fixed-clock"; 47 #clock-cells = <0>; [all …]
|
| /openbmc/u-boot/arch/arm/include/asm/arch-pxa/ |
| H A D | pxa-regs.h | 2 * linux/include/asm-arm/arch-pxa/pxa-regs.h 12 * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de 13 * Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions. 22 /* FIXME hack so that SA-1111.h will work [cb] */ 134 #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ 147 #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ 148 #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ 302 #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ 309 #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ 354 #define SACR1 0x40400004 /* Serial Audio I 2 S/MSB-Justified Control Register */ [all …]
|