| /openbmc/u-boot/arch/arm/dts/ |
| H A D | imx6sx-sdb.dtsi | 9 /dts-v1/; 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/input/input.h> 17 compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; 20 stdout-path = &uart1; 28 compatible = "pwm-backlight"; 30 brightness-levels = <0 4 8 16 32 64 128 255>; 31 default-brightness-level = <6>; 34 gpio-keys { 35 compatible = "gpio-keys"; [all …]
|
| H A D | imx6sll-evk.dts | 9 /dts-v1/; 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/input/input.h> 17 compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; 24 compatible = "pwm-backlight"; 26 brightness-levels = <0 4 8 16 32 64 128 255>; 27 default-brightness-level = <6>; 32 compatible = "fsl,max8903-charger"; 33 pinctrl-names = "default"; 45 compatible = "fsl,imx6sl-pxp-v4l2"; [all …]
|
| H A D | r8a7791-porter.dts | 1 // SPDX-License-Identifier: GPL-2.0 9 * SSI-AK4642 11 * JP3: 2-1: AK4642 12 * 2-3: ADV7511 19 /dts-v1/; 21 #include <dt-bindings/gpio/gpio.h> 35 stdout-path = "serial0:115200n8"; 48 vcc_sdhi0: regulator-vcc-sdhi0 { 49 compatible = "regulator-fixed"; 51 regulator-name = "SDHI0 Vcc"; [all …]
|
| H A D | imx6qdl-sabreauto.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 #include <dt-bindings/gpio/gpio.h> 7 #include <dt-bindings/input/input.h> 11 stdout-path = &uart4; 19 compatible = "gpio-leds"; 20 pinctrl-names = "default"; 21 pinctrl-0 = <&pinctrl_gpio_leds>; 29 gpio-keys { 30 compatible = "gpio-keys"; 31 pinctrl-names = "default"; [all …]
|
| H A D | imx6q-cm-fx6.dts | 6 * This file is dual-licensed: you can use it either under the terms 44 /dts-v1/; 45 #include <dt-bindings/gpio/gpio.h> 49 model = "CompuLab CM-FX6"; 50 compatible = "compulab,cm-fx6", "fsl,imx6q"; 57 compatible = "gpio-leds"; 59 heartbeat-led { 61 gpios = <&gpio2 31 0>; 62 linux,default-trigger = "heartbeat"; 67 pinctrl-names = "default"; [all …]
|
| H A D | r8a7793-gose.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2014-2015 Renesas Electronics Corporation 9 * SSI-AK4643 36 /dts-v1/; 38 #include <dt-bindings/gpio/gpio.h> 39 #include <dt-bindings/input/input.h> 56 stdout-path = "serial0:115200n8"; 64 gpio-keys { 65 compatible = "gpio-keys"; 67 key-1 { [all …]
|
| H A D | imx6qdl-sabresd.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 #include <dt-bindings/clock/imx6qdl-clock.h> 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/input/input.h> 16 stdout-path = &uart1; 24 compatible = "simple-bus"; 25 #address-cells = <1>; 26 #size-cells = <0>; 29 compatible = "regulator-fixed"; 31 regulator-name = "usb_otg_vbus"; [all …]
|
| H A D | r8a7791-koelsch.dts | 1 // SPDX-License-Identifier: GPL-2.0 6 * Copyright (C) 2013-2014 Renesas Solutions Corp. 11 * SSI-AK4643 38 /dts-v1/; 40 #include <dt-bindings/gpio/gpio.h> 41 #include <dt-bindings/input/input.h> 60 stdout-path = "serial0:115200n8"; 74 #address-cells = <1>; 75 #size-cells = <1>; 79 compatible = "gpio-keys"; [all …]
|
| H A D | rk3288-veyron-jerry.dts | 1 // SPDX-License-Identifier: GPL-2.0 8 /dts-v1/; 9 #include "rk3288-veyron-chromebook.dtsi" 10 #include "cros-ec-sbs.dtsi" 14 compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", 15 "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", 16 "google,veyron-jerry-rev3", "google,veyron-jerry", 20 stdout-path = &uart2; 23 panel_regulator: panel-regulator { 24 compatible = "regulator-fixed"; [all …]
|
| H A D | ulcb.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for the R-Car Gen3 ULCB board 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/input/input.h> 13 model = "Renesas R-Car Gen3 ULCB board"; 21 stdout-path = "serial0:115200n8"; 24 audio_clkout: audio-clkout { 27 * but needed to avoid cs2000/rcar_sound probe dead-lock 29 compatible = "fixed-clock"; 30 #clock-cells = <0>; [all …]
|
| H A D | rk3399-puma.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ OR X11 6 #include <dt-bindings/pwm/pwm.h> 10 model = "Theobroma Systems RK3399-Q7 SoM"; 11 compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399"; 14 u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */ 15 u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */ 16 u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */ 17 u-boot,boot-led = "module_led"; 18 sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>; 22 stdout-path = "serial0:115200n8"; [all …]
|
| H A D | rk3399-gru.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 5 * Copyright 2016-2017 Google, Inc 8 #include <dt-bindings/input/input.h> 10 #include "rk3399-op1-opp.dtsi" 14 u-boot,dm-pre-reloc; 15 stdout-path = "serial2:115200n8"; 16 u-boot,spl-boot-order = &spi_flash; 20 u-boot,spl-payload-offset = <0x40000>; 29 * - Rails that only connect to the EC (or devices that the EC talks to) 31 * - Rails _are_ included if the rails go to the AP even if the AP [all …]
|
| H A D | am43x-epos-evm.dts | 2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 11 /dts-v1/; 14 #include <dt-bindings/pinctrl/am43xx.h> 15 #include <dt-bindings/gpio/gpio.h> 16 #include <dt-bindings/pwm/pwm.h> 17 #include <dt-bindings/sound/tlv320aic31xx-micbias.h> 21 compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43"; 28 stdout-path = &uart0; 29 tick-timer = &timer2; 32 vmmcsd_fixed: fixedregulator-sd { [all …]
|
| H A D | am57xx-beagle-x15-common.dtsi | 2 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/ 8 /dts-v1/; 11 #include "am57xx-commercial-grade.dtsi" 12 #include "dra74x-mmc-iodelay.dtsi" 13 #include <dt-bindings/gpio/gpio.h> 14 #include <dt-bindings/interrupt-controller/irq.h> 17 compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; 27 stdout-path = &uart3; 35 vdd_3v3: fixedregulator-vdd_3v3 { 36 compatible = "regulator-fixed"; [all …]
|
| H A D | rk3188-radxarock.dts | 1 // SPDX-License-Identifier: GPL-2.0+ OR X11 6 /dts-v1/; 7 #include <dt-bindings/input/input.h> 9 #include "rk3188-radxarock-u-boot.dtsi" 16 /* stdout-path = &uart2; */ 17 stdout-path = "serial2:115200n8"; 21 u-boot,dm-pre-reloc; 22 u-boot,boot-led = "rock:red:power"; 30 gpio-keys { 31 compatible = "gpio-keys"; [all …]
|
| H A D | rk3288-veyron.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 8 #include <dt-bindings/clock/rockchip,rk808.h> 9 #include <dt-bindings/input/input.h> 18 stdout-path = &uart2; 22 u-boot,dm-pre-reloc; 23 u-boot,boot0 = &spi_flash; 28 pinctrl-names = "default"; 29 pinctrl-0 = <&fw_wp_ap>; 30 write-protect-gpio = <&gpio7 6 GPIO_ACTIVE_LOW>; 35 compatible = "pwm-backlight"; [all …]
|
| H A D | logicpd-som-lv.dtsi | 7 #include <dt-bindings/input/input.h> 12 cpu0-supply = <&vcc>; 22 compatible = "regulator-fixed"; 23 regulator-name = "vwl1271"; 24 regulator-min-microvolt = <1800000>; 25 regulator-max-microvolt = <1800000>; 27 startup-delay-us = <70000>; 28 enable-active-high; 29 vin-supply = <&vaux3>; 34 compatible = "usb-nop-xceiv"; [all …]
|
| H A D | am335x-evmsk.dts | 2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ 14 /dts-v1/; 17 #include <dt-bindings/pwm/pwm.h> 18 #include <dt-bindings/interrupt-controller/irq.h> 21 model = "TI AM335x EVM-SK"; 22 compatible = "ti,am335x-evmsk", "ti,am33xx"; 25 stdout-path = &uart0; 26 tick-timer = &timer2; 31 cpu0-supply = <&vdd1_reg>; 41 compatible = "regulator-fixed"; [all …]
|
| H A D | salvator-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 3 * Device Tree Source for common parts of Salvator-X board variants 5 * Copyright (C) 2015-2016 Renesas Electronics Corp. 9 * SSI-AK4613 31 #include <dt-bindings/gpio/gpio.h> 42 stdout-path = "serial0:115200n8"; 45 audio_clkout: audio-clkout { 48 * but needed to avoid cs2000/rcar_sound probe dead-lock 50 compatible = "fixed-clock"; 51 #clock-cells = <0>; [all …]
|
| H A D | am57xx-cl-som-am57x.dts | 2 * Support for CompuLab CL-SOM-AM57x System-on-Module 4 * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ 12 /dts-v1/; 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/interrupt-controller/irq.h> 19 model = "CompuLab CL-SOM-AM57x"; 20 compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; 24 reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */ 28 compatible = "gpio-leds"; 29 pinctrl-names = "default"; [all …]
|
| H A D | tegra124-nyan.dtsi | 1 #include <dt-bindings/input/input.h> 19 vdd-supply = <&vdd_3v3_hdmi>; 20 pll-supply = <&vdd_hdmi_pll>; 21 hdmi-supply = <&vdd_5v0_hdmi>; 23 nvidia,ddc-i2c-bus = <&hdmi_ddc>; 24 nvidia,hpd-gpio = 36 vdd-supply = <&vdd_3v3_panel>; 52 clock-frequency = <100000>; 54 acodec: audio-codec@10 { 57 interrupt-parent = <&gpio>; [all …]
|
| H A D | am437x-sk-evm.dts | 2 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ 11 /dts-v1/; 14 #include <dt-bindings/pinctrl/am43xx.h> 15 #include <dt-bindings/pwm/pwm.h> 16 #include <dt-bindings/gpio/gpio.h> 17 #include <dt-bindings/input/input.h> 21 compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43"; 28 stdout-path = &uart0; 29 tick-timer = &timer2; 33 compatible = "pwm-backlight"; [all …]
|
| H A D | rk3288.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 #include <dt-bindings/gpio/gpio.h> 4 #include <dt-bindings/interrupt-controller/irq.h> 5 #include <dt-bindings/interrupt-controller/arm-gic.h> 6 #include <dt-bindings/pinctrl/rockchip.h> 7 #include <dt-bindings/clock/rk3288-cru.h> 8 #include <dt-bindings/power-domain/rk3288.h> 9 #include <dt-bindings/thermal/thermal.h> 10 #include <dt-bindings/video/rk3288.h> 16 interrupt-parent = <&gic>; [all …]
|
| /openbmc/u-boot/arch/sandbox/dts/ |
| H A D | test.dts | 1 /dts-v1/; 6 #address-cells = <1>; 7 #size-cells = <1>; 15 gpio2 = &gpio_b; 27 testfdt6 = "/e-test"; 28 testbus3 = "/some-bus"; 29 testfdt0 = "/some-bus/c-test@0"; 30 testfdt1 = "/some-bus/c-test@1"; 31 testfdt3 = "/b-test"; 32 testfdt5 = "/some-bus/c-test@5"; [all …]
|
| /openbmc/u-boot/arch/arm/include/asm/arch-pxa/ |
| H A D | pxa-regs.h | 2 * linux/include/asm-arm/arch-pxa/pxa-regs.h 12 * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de 13 * Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions. 22 /* FIXME hack so that SA-1111.h will work [cb] */ 134 #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ 147 #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ 148 #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ 302 #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ 309 #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ 354 #define SACR1 0x40400004 /* Serial Audio I 2 S/MSB-Justified Control Register */ [all …]
|