/openbmc/linux/arch/arm64/boot/dts/renesas/ |
H A D | hihope-rzg2-ex-lvds.dtsi | 11 pwms = <&pwm0 0 50000>; 41 pwm0_pins: pwm0 { 42 groups = "pwm0"; 43 function = "pwm0"; 47 &pwm0 {
|
H A D | hihope-rzg2-ex.dtsi | 84 pwm0_pins: pwm0 { 85 groups = "pwm0"; 86 function = "pwm0"; 90 &pwm0 {
|
/openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | loongson,ls2k-pinctrl.yaml | 42 enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, 47 enum: [gpio, sdio, can1, can0, pwm3, pwm2, pwm1, pwm0, i2c1, i2c0, 84 pwm0_pins_default: pwm0-pins { 86 groups = "pwm0"; 87 function = "pwm0";
|
H A D | mediatek,mt76x8-pinctrl.yaml | 40 p4led_an, p4led_kn, pcie, pcm, perst, pwm, pwm0, pwm1, 82 p4led_kn, perst, pwm0, pwm1, refclk, sdmode, spi, 244 const: pwm0 248 enum: [pwm0] 320 enum: [pwm0] 393 p3led_kn, p4led_an, p4led_kn, pwm0, pwm1, sdmode, spis]
|
/openbmc/linux/arch/riscv/boot/dts/sifive/ |
H A D | hifive-unleashed-a00.dts | 52 pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>; 60 pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>; 68 pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>; 76 pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>; 131 &pwm0 {
|
H A D | hifive-unmatched-a00.dts | 54 pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>; 71 pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>; 77 pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>; 83 pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>; 275 &pwm0 {
|
/openbmc/linux/arch/arm/boot/dts/microchip/ |
H A D | at91-kizboxmini-common.dtsi | 60 pwms = <&pwm0 2 10000000 0>; 68 pwms = <&pwm0 0 10000000 0>; 75 pwms = <&pwm0 1 10000000 0>; 93 &pwm0 {
|
H A D | at91-kizbox2-common.dtsi | 64 pwms = <&pwm0 2 10000000 0>; 71 pwms = <&pwm0 1 10000000 0>; 78 pwms = <&pwm0 0 10000000 0>; 163 &pwm0 {
|
H A D | at91-kizbox3_common.dtsi | 76 pwms = <&pwm0 0 10000000 0>; 84 pwms = <&pwm0 1 10000000 0>; 92 pwms = <&pwm0 2 10000000 0>; 99 pwms = <&pwm0 3 10000000 0>; 334 &pwm0 {
|
H A D | at91-sam9x60_curiosity.dts | 379 pwm0 { 380 pinctrl_pwm0_0: pwm0-0 { 384 pinctrl_pwm0_1: pwm0-1 { 388 pinctrl_pwm0_2: pwm0-2 { 436 &pwm0 {
|
H A D | at91sam9m10g45ek.dts | 158 pwm0 { 215 pwm0: pwm@fffb8000 { label 333 pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; 340 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
|
H A D | at91sam9rlek.dts | 190 pwm0: pwm@fffc8000 { label 230 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; 236 pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
|
/openbmc/linux/Documentation/devicetree/bindings/pwm/ |
H A D | pwm-sifive.yaml | 32 - const: sifive,pwm0 37 SiFive FU540 and FU740 chip respectively, and "sifive,pwm0" for the 66 compatible = "sifive,fu540-c000-pwm", "sifive,pwm0";
|
H A D | pxa-pwm.txt | 18 pwm0: pwm@40b00000 { 28 pwms = <&pwm0 5000000>;
|
H A D | pwm-lp3943.txt | 9 - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1. 32 ti,pwm0 = <8 9 10>;
|
/openbmc/linux/arch/arm64/boot/dts/rockchip/ |
H A D | rk3326-anbernic-rg351m.dts | 17 pwms = <&pwm0 0 1000000 0>; 31 &pwm0 {
|
H A D | rk3318-a95x-z2.dts | 120 pwms = <&pwm0 0 5000 1>; 239 pwm0 { 240 pwm0_pin_pull_up: pwm0-pin-pull-up { 274 &pwm0 {
|
/openbmc/linux/drivers/video/backlight/ |
H A D | pandora_bl.c | 4 * Pandora uses TWL4030 PWM0 -> TPS61161 combo for control backlight. 60 /* first disable PWM0 output, then clock */ in pandora_backlight_update_status() 77 /* first enable clock, then PWM0 out */ in pandora_backlight_update_status()
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | at91sam9m10g45ek.dts | 147 pwm0 { 200 pwm0: pwm@fffb8000 { label 299 pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>; 306 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
|
H A D | at91sam9rlek.dts | 156 pwm0: pwm@fffc8000 { label 193 pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>; 199 pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
|
/openbmc/linux/arch/arm/boot/dts/broadcom/ |
H A D | bcm2835-common.dtsi | 165 pwm0_gpio12: pwm0-gpio12 { 169 pwm0_gpio18: pwm0-gpio18 { 173 pwm0_gpio40: pwm0-gpio40 {
|
/openbmc/u-boot/board/rockchip/evb_rk3399/ |
H A D | evb-rk3399.c | 30 /* Enable pwm0 for panel backlight */ in board_init() 33 debug("%s PWM0 pinctrl init fail! (ret=%d)\n", __func__, ret); in board_init()
|
/openbmc/u-boot/arch/arm/mach-tegra/tegra114/ |
H A D | pinmux.c | 46 PIN(SDMMC1_DAT2_PY5, SDMMC1, PWM0, SPI4, UARTA), 124 PIN(UART3_RTS_N_PC0, UARTC, PWM0, DTV, DISPLAYA), 128 PIN(PU3, PWM0, UARTA, DISPLAYA, DISPLAYB), 160 PIN(GMI_AD8_PH0, PWM0, NAND, GMI, DTV), 264 PIN(SDMMC3_DAT3_PB4, SDMMC3, PWM0, DISPLAYB, SPI3),
|
/openbmc/linux/drivers/pinctrl/ |
H A D | pinctrl-loongson2.c | 115 PMX_GROUP(pwm0, 0x0, 12), 130 SPECIFIC_GROUP(pwm0); 141 "pwm3", "pwm2", "pwm1", "pwm0", 157 FUNCTION(pwm0),
|
/openbmc/u-boot/arch/arm/mach-tegra/tegra124/ |
H A D | pinmux.c | 46 PIN(SDMMC1_DAT2_PY5, SDMMC1, PWM0, SPI4, UARTA), 124 PIN(UART3_RTS_N_PC0, UARTC, PWM0, DTV, GMI), 128 PIN(PU3, PWM0, UARTA, GMI, DISPLAYB), 160 PIN(PH0, PWM0, TRACE, GMI, DTV), 264 PIN(SDMMC3_DAT3_PB4, SDMMC3, PWM0, DISPLAYB, SPI3),
|