| /openbmc/linux/Documentation/devicetree/bindings/power/supply/ |
| H A D | battery.yaml | 91 - description: the temperature in degree Celsius
94 A table providing the temperature in degree Celsius
99 ocv-capacity-celsius:
101 An array containing the temperature in degree Celsius,
104 operating-range-celsius:
110 ambient-celsius:
116 alert-celsius:
162 ocv-capacity-celsius = <(-10) 0 10>;
163 /* table for -10 degree Celsius */
165 /* table for 0 degree Celsius */
[all …]
|
| H A D | maxim,max77693.yaml | 42 maxim,thermal-regulation-celsius:
44 Temperature in Celsius for entering high temperature charging mode.
46 reduced by 105 mA/Celsius.
|
| H A D | summit,smb347-charger.yaml | 64 summit,chip-temperature-threshold-celsius:
158 summit,chip-temperature-threshold-celsius = <110>;
180 operating-range-celsius = <0 45>;
181 alert-celsius = <3 42>;
|
| /openbmc/linux/Documentation/devicetree/bindings/iio/afe/ |
| H A D | temperature-sense-rtd.yaml | 15 (usually 0 to 100 degrees Celsius).
62 alpha-ppm-per-celsius:
64 alpha can also be expressed in micro-ohms per ohm Celsius. It's a linear
66 between 0 and 100 degrees Celsius.
70 Where, R_100 is the resistance of the sensor at 100 degrees Celsius, and
72 Celsius.
79 Resistance of the sensor at 0 degrees Celsius.
87 - alpha-ppm-per-celsius
98 alpha-ppm-per-celsius = <3908>;
|
| H A D | temperature-transducer.yaml | 67 This offset is commonly used to convert from Kelvins to degrees Celsius.
78 alpha-ppm-per-celsius:
83 degrees Celsius or micro-volts per degrees Celsius. The is the main
92 - alpha-ppm-per-celsius
101 sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
103 alpha-ppm-per-celsius = <1>; /* 1 uA/K */
111 sense-offset-millicelsius = <(-273150)>; /* Kelvin to degrees Celsius */
112 alpha-ppm-per-celsius = <4000>; /* 4 mV/K */
|
| /openbmc/linux/Documentation/hwmon/ |
| H A D | ds1621.rst | 67 degree Celsius to +125 in 0.5 increments. You may convert this into a
83 1.0 degree Celsius to avoid Tout "bouncing", though!
125 - DS1621: +/- 0.5 degree Celsius (from 0 to +70 degrees)
126 - DS1625: +/- 0.5 degree Celsius (from 0 to +70 degrees)
127 - DS1631: +/- 0.5 degree Celsius (from 0 to +70 degrees)
128 - DS1721: +/- 1.0 degree Celsius (from -10 to +85 degrees)
129 - DS1731: +/- 1.0 degree Celsius (from -10 to +85 degrees)
146 0 0 9 bits, 0.5 degrees Celsius
147 1 0 10 bits, 0.25 degrees Celsius
148 0 1 11 bits, 0.125 degrees Celsius
[all …]
|
| H A D | w83773g.rst | 26 Temperature is measured in degrees Celsius.
28 range of -40 to +125 degrees Celsius (for local sensor) and -40 to +127
29 degrees Celsius (for remote sensors).
|
| H A D | sht4x.rst | 25 and temperature sensor. Temperature is measured in degree celsius, relative
27 scaled by 1000, i.e. the value for 31.5 degrees celsius is 31500.
40 temp1_input Measured temperature in millidegrees Celsius
|
| H A D | sht21.rst | 40 0.2 degree Celsius) compared with the SHT21 (2.0% relative humidity,
41 0.3 degree Celsius).
64 Celsius, the device should not be active for more than 10% of the time,
|
| H A D | lm70.rst | 56 13-bit temperature data (0.0625 degrees celsius resolution).
61 with 0.25 degrees Celsius resolution.
64 data (0.03125 degrees celsius resolution).
|
| /openbmc/u-boot/doc/device-tree-bindings/exynos/ |
| H A D | tmu.txt | 6 - samsung,min-temp : Minimum temperature value (25 degree celsius)
8 - samsung,max-temp : Maximum temperature value (125 degree celsius)
10 - samsung,start-warning : Temperature at which TMU starts giving warning (degree celsius)
11 - samsung,start-tripping : Temperature at which TMU shuts down the system (degree celsius)
13 in case TMU fails to power off (degree celsius)
|
| /openbmc/linux/Documentation/ABI/testing/ |
| H A D | sysfs-class-hwmon | 380 Unit: millidegree Celsius (or millivolt, see below)
388 Unit: millidegree Celsius
396 Unit: millidegree Celsius
406 Unit: millidegree Celsius
417 Unit: millidegree Celsius
426 Unit: millidegree Celsius
448 Unit: millidegree Celsius
461 Unit: millidegree Celsius
469 Unit: millidegree Celsius
481 Unit: millidegree Celsius
[all …]
|
| H A D | sysfs-class-thermal | 16 Unit: millidegree Celsius
53 Unit: millidegree Celsius
71 Unit: Celsius
110 Unit: millidegree Celsius
167 Unit: millidegree Celsius
|
| /openbmc/linux/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/ |
| H A D | smu11_driver_if_vangogh.h | 186 uint16_t CoreTemperature[8]; //[centi-Celsius]
188 uint16_t L3Temperature[2]; //[centi-Celsius]
190 uint16_t GfxTemperature; //[centi-Celsius]
191 uint16_t SocTemperature; //[centi-Celsius]
216 uint16_t CoreTemperature[4]; //[centi-Celsius]
218 uint16_t L3Temperature[1]; //[centi-Celsius]
220 uint16_t GfxTemperature; //[centi-Celsius]
221 uint16_t SocTemperature; //[centi-Celsius]
|
| H A D | smu11_driver_if_cyan_skillfish.h | 43 uint16_t CoreTemperature[6]; //[centi-Celsius]
45 uint16_t L3Temperature[2]; //[centi-Celsius]
50 uint16_t GfxTemperature; //[centi-Celsius]
64 uint16_t SocTemperature; //[centi-Celsius]
|
| H A D | smu12_driver_if.h | 191 uint16_t CoreTemperature[8]; //[centi-Celsius]
193 uint16_t L3Temperature[2]; //[centi-Celsius]
195 uint16_t GfxTemperature; //[centi-Celsius]
196 uint16_t SocTemperature; //[centi-Celsius]
|
| H A D | smu13_driver_if_yellow_carp.h | 176 uint16_t CoreTemperature[8]; //[centi-Celsius]
178 uint16_t L3Temperature; //[centi-Celsius]
180 uint16_t GfxTemperature; //[centi-Celsius]
181 uint16_t SocTemperature; //[centi-Celsius]
|
| /openbmc/bmcweb/redfish-core/schema/dmtf/json-schema-installed/ |
| H A D | ThermalMetrics.v1_3_2.json | 160 … "description": "The ambient temperature (in degree Celsius units) of this subsystem.",
162 …ongDescription": "This property shall contain the temperature, in degree Celsius units, for the am…
173 … "description": "The exhaust temperature (in degree Celsius units) of this subsystem.",
175 …ongDescription": "This property shall contain the temperature, in degree Celsius units, for the ex…
186 … "description": "The intake temperature (in degree Celsius units) of this subsystem.",
188 …ongDescription": "This property shall contain the temperature, in degree Celsius units, for the in…
199 … "description": "The internal temperature (in degree Celsius units) of this subsystem.",
201 …ongDescription": "This property shall contain the temperature, in degree Celsius units, for the in…
331 …"description": "The temperatures (in degree Celsius units) from all related sensors for this devic…
336 …ngDescription": "This property shall contain the temperatures, in degree Celsius units, for this s…
|
| /openbmc/bmcweb/redfish-core/schema/dmtf/json-schema/ |
| H A D | ThermalMetrics.v1_3_2.json | 160 … "description": "The ambient temperature (in degree Celsius units) of this subsystem.",
162 …ongDescription": "This property shall contain the temperature, in degree Celsius units, for the am…
173 … "description": "The exhaust temperature (in degree Celsius units) of this subsystem.",
175 …ongDescription": "This property shall contain the temperature, in degree Celsius units, for the ex…
186 … "description": "The intake temperature (in degree Celsius units) of this subsystem.",
188 …ongDescription": "This property shall contain the temperature, in degree Celsius units, for the in…
199 … "description": "The internal temperature (in degree Celsius units) of this subsystem.",
201 …ongDescription": "This property shall contain the temperature, in degree Celsius units, for the in…
331 …"description": "The temperatures (in degree Celsius units) from all related sensors for this devic…
336 …ngDescription": "This property shall contain the temperatures, in degree Celsius units, for this s…
|
| /openbmc/linux/Documentation/driver-api/thermal/ |
| H A D | exynos_thermal.rst | 40 Trimming info for 25 degree Celsius (stored at TRIMINFO register)
41 Temperature code measured at 25 degree Celsius which is unchanged
43 Trimming info for 85 degree Celsius (stored at TRIMINFO register)
44 Temperature code measured at 85 degree Celsius which is unchanged
|
| /openbmc/linux/drivers/hwmon/ |
| H A D | lm70.c | 79 * Further, each bit represents 0.25 degrees Celsius; so, multiply in temp1_input_show()
81 * Celsius. in temp1_input_show()
86 * resolution 0.0625 degrees celsius. in temp1_input_show()
90 * resolution 0.0312 degrees celsius. in temp1_input_show()
95 * data format with a resolution of 0.25 degrees celsius per unit. in temp1_input_show()
118 status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */ in temp1_input_show()
|
| /openbmc/linux/Documentation/devicetree/bindings/iio/temperature/ |
| H A D | melexis,mlx90632.yaml | 18 Celsius with relative error of measurement below 1 degree Celsius in
21 Celsius it is suitable also for outdoor use.
|
| /openbmc/linux/include/linux/ |
| H A D | units.h | 76 * deci_kelvin_to_millicelsius_with_offset - convert Kelvin to Celsius
78 * @offset: difference between Kelvin and Celsius in millidegrees
80 * Return: temperature value in millidegrees Celsius
|
| /openbmc/bmcweb/redfish-core/schema/dmtf/installed/ |
| H A D | ThermalMetrics_v1.xml | 80 …<Annotation Term="OData.Description" String="The temperatures (in degree Celsius units) from all r…
81 …ription" String="This property shall contain the temperatures, in degree Celsius units, for this s…
95 …<Annotation Term="OData.Description" String="The internal temperature (in degree Celsius units) of…
96 …cription" String="This property shall contain the temperature, in degree Celsius units, for the in…
100 …<Annotation Term="OData.Description" String="The intake temperature (in degree Celsius units) of t…
101 …cription" String="This property shall contain the temperature, in degree Celsius units, for the in…
105 …<Annotation Term="OData.Description" String="The exhaust temperature (in degree Celsius units) of …
106 …cription" String="This property shall contain the temperature, in degree Celsius units, for the ex…
110 …<Annotation Term="OData.Description" String="The ambient temperature (in degree Celsius units) of …
111 …cription" String="This property shall contain the temperature, in degree Celsius units, for the am…
|
| /openbmc/bmcweb/redfish-core/schema/dmtf/csdl/ |
| H A D | ThermalMetrics_v1.xml | 80 …<Annotation Term="OData.Description" String="The temperatures (in degree Celsius units) from all r…
81 …ription" String="This property shall contain the temperatures, in degree Celsius units, for this s…
95 …<Annotation Term="OData.Description" String="The internal temperature (in degree Celsius units) of…
96 …cription" String="This property shall contain the temperature, in degree Celsius units, for the in…
100 …<Annotation Term="OData.Description" String="The intake temperature (in degree Celsius units) of t…
101 …cription" String="This property shall contain the temperature, in degree Celsius units, for the in…
105 …<Annotation Term="OData.Description" String="The exhaust temperature (in degree Celsius units) of …
106 …cription" String="This property shall contain the temperature, in degree Celsius units, for the ex…
110 …<Annotation Term="OData.Description" String="The ambient temperature (in degree Celsius units) of …
111 …cription" String="This property shall contain the temperature, in degree Celsius units, for the am…
|