Home
last modified time | relevance | path

Searched +full:5 +full:gbps (Results 1 – 25 of 172) sorted by relevance

1234567

/openbmc/linux/Documentation/devicetree/bindings/phy/
H A Dmicrochip,sparx5-serdes.yaml35 * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
36 * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
37 * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
45 * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
46 * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
47 * 5 Gbps (QSGMII/USGMII)
48 * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
49 * 10 Gbps (10G-USGMII)
50 * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
57 * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
[all …]
H A Dapm-xgene-phy.txt1 * APM X-Gene 15Gbps Multi-purpose PHY nodes
3 PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each
48 0 = 1-2Gbps
49 1 = 2-4Gbps (1st tuple default)
50 2 = 4-8Gbps
51 3 = 8-15Gbps (2nd tuple default)
52 4 = 2.5-4Gbps
53 5 = 4-5Gbps
54 6 = 5-6Gbps
55 7 = 6-16Gbps (3rd tuple default)
/openbmc/linux/drivers/scsi/mvsas/
H A Dmv_94xx.h75 /* ports 5-7 follow after this */
81 /* ports 5-7 follow after this */
87 /* ports 5-7 follow after this */
146 MVS_IRQ_COM_OUT_I2O_HOS1 = (1 << 5),
180 * bit 2: 6Gbps support
181 * bit 1: 3Gbps support
182 * bit 0: 1.5Gbps support
188 * bit 5: G1 (1.5Gbps) Without SSC
189 * bit 4: G1 (1.5Gbps) with SSC
190 * bit 3: G2 (3.0Gbps) Without SSC
[all …]
/openbmc/u-boot/arch/arm/cpu/armv8/fsl-layerscape/doc/
H A DREADME.soc7 5. LS1046A
101 - Cryptography acceleration (SEC) at up to 10 Gbps
102 - RegEx pattern matching acceleration (PME) at up to 10 Gbps
103 - Decompression/compression acceleration (DCE) at up to 20 Gbps
104 - Accelerated I/O processing (AIOP) at up to 20 Gbps
108 - Up to eight 10 Gbps Ethernet MACs
109 - Up to eight 1 / 2.5 Gbps Ethernet MACs
192 - Up to 1 x QSGMII (MAC 5, 6, 10, 1)
193 - Up to 4 x SGMII supporting 1000Mbps (MAC 5, 6, 9, 10)
194 - Up to 3 x SGMII supporting 2500Mbps (MAC 5, 9, 10)
[all …]
/openbmc/u-boot/drivers/phy/marvell/
H A Dcomphy_core.c23 "1.25 Gbps", "1.5 Gbps", "2.5 Gbps", in get_speed_string()
24 "3.0 Gbps", "3.125 Gbps", "5 Gbps", "6 Gbps", in get_speed_string()
25 "6.25 Gbps", "10.31 Gbps" in get_speed_string()
/openbmc/linux/drivers/gpu/drm/amd/display/dc/
H A Ddc_dp_types.h50 LINK_RATE_LOW = 0x06, // Rate_1 (RBR) - 1.62 Gbps/Lane
51 LINK_RATE_RATE_2 = 0x08, // Rate_2 - 2.16 Gbps/Lane
52 LINK_RATE_RATE_3 = 0x09, // Rate_3 - 2.43 Gbps/Lane
53 LINK_RATE_HIGH = 0x0A, // Rate_4 (HBR) - 2.70 Gbps/Lane
54 LINK_RATE_RBR2 = 0x0C, // Rate_5 (RBR2) - 3.24 Gbps/Lane
55 LINK_RATE_RATE_6 = 0x10, // Rate_6 - 4.32 Gbps/Lane
56 LINK_RATE_HIGH2 = 0x14, // Rate_7 (HBR2) - 5.40 Gbps/Lane
57 LINK_RATE_RATE_8 = 0x19, // Rate_8 - 6.75 Gbps/Lane
58 LINK_RATE_HIGH3 = 0x1E, // Rate_9 (HBR3) - 8.10 Gbps/Lane
62 LINK_RATE_UHBR10 = 1000, // UHBR10 - 10.0 Gbps/Lane
[all …]
/openbmc/linux/drivers/net/ethernet/ezchip/
H A Dnps_enet.h59 /* Gbps Eth MAC Configuration 0 register masks and shifts */
71 #define CFG_0_RX_FC_EN_SHIFT 5
93 /* Gbps Eth MAC Configuration 1 register masks and shifts */
103 /* Gbps Eth MAC Configuration 2 register masks and shifts */
119 /* Gbps Eth MAC Configuration 3 register masks and shifts */
129 #define CFG_3_CF_DROP_SHIFT 5
/openbmc/linux/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/
H A Dsmu11_driver_if_arcturus.h61 #define FEATURE_DPM_MP0CLK_BIT 5
192 #define THROTTLER_TEMP_VR_MEM_BIT 5
217 #define WORKLOAD_PPLIB_COUNT 5
429 XGMI_LINK_RATE_2 = 2, // 2Gbps
430 XGMI_LINK_RATE_4 = 4, // 4Gbps
431 XGMI_LINK_RATE_8 = 8, // 8Gbps
432 XGMI_LINK_RATE_12 = 12, // 12Gbps
433 XGMI_LINK_RATE_16 = 16, // 16Gbps
434 XGMI_LINK_RATE_17 = 17, // 17Gbps
435 XGMI_LINK_RATE_18 = 18, // 18Gbps
[all …]
H A Dsmu11_driver_if_sienna_cichlid.h81 #define FEATURE_DPM_SOCCLK_BIT 5
200 #define THROTTLER_TEMP_VR_MEM0_BIT 5
224 #define FW_DSTATE_MP1_DS_BIT 5
453 #define NUM_PIECE_WISE_LINEAR_DROOP_MODEL_VF_POINTS 5
524 XGMI_LINK_RATE_2 = 2, // 2Gbps
525 XGMI_LINK_RATE_4 = 4, // 4Gbps
526 XGMI_LINK_RATE_8 = 8, // 8Gbps
527 XGMI_LINK_RATE_12 = 12, // 12Gbps
528 XGMI_LINK_RATE_16 = 16, // 16Gbps
529 XGMI_LINK_RATE_17 = 17, // 17Gbps
[all …]
/openbmc/u-boot/board/freescale/t208xqds/
H A DREADME19 - Up to four 10 Gbps Ethernet MACs
20 - Up to eight 1 Gbps Ethernet MACs
21 - Up to four 2.5 Gbps Ethernet MACs
24 - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
57 - Two 1Gbps RGMII on-board ports
58 - Four 10Gbps XFI on-board cages
59 - 1Gbps/2.5Gbps SGMII Riser card
60 - 10Gbps XAUI Riser card
77 - Two Serial RapidIO 2.0 ports up to 5 GHz
114 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a
[all …]
/openbmc/linux/tools/testing/selftests/drivers/net/mlxsw/
H A Dqos_lib.sh29 # 1Gbps. That wouldn't saturate egress and MC would thus get through,
30 # seemingly winning bandwidth on account of UC. Demand at least 2Gbps
34 for i in {5..0}; do
H A Dqos_mc_aware.sh39 # | >1Gbps | | >1Gbps |
48 # | | 1Gbps bottleneck |
152 devlink_port_pool_th_set $swp1 0 5
154 devlink_tc_bind_pool_th_set $swp1 0 ingress 0 5
157 devlink_port_pool_th_set $swp2 0 5
159 devlink_tc_bind_pool_th_set $swp2 1 ingress 0 5
267 # degradation on 1Gbps link.
H A Dqos_ets_strict.sh24 # | >1Gbps | | >1Gbps |
33 # | | 1Gbps bottleneck |
119 lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:1,2:2,3:3,4:4,5:5,6:6,7:7
126 )"5:strict,"$(
204 lldptool -T -i $swp3 -V ETS-CFG up2tc=0:0,1:0,2:0,3:0,4:0,5:0,6:0,7:0
/openbmc/linux/drivers/net/phy/
H A Dphy-core.c27 return "1Gbps"; in phy_speed_to_str()
29 return "2.5Gbps"; in phy_speed_to_str()
31 return "5Gbps"; in phy_speed_to_str()
33 return "10Gbps"; in phy_speed_to_str()
35 return "14Gbps"; in phy_speed_to_str()
37 return "20Gbps"; in phy_speed_to_str()
39 return "25Gbps"; in phy_speed_to_str()
41 return "40Gbps"; in phy_speed_to_str()
43 return "50Gbps"; in phy_speed_to_str()
45 return "56Gbps"; in phy_speed_to_str()
[all …]
/openbmc/linux/include/rdma/
H A Dopa_port_info.h32 #define OPA_LINKDOWN_REASON_BAD_SLID 5
96 #define OPA_LINK_SPEED_NOP 0x0000 /* Reserved (1-5 Gbps) */
97 #define OPA_LINK_SPEED_12_5G 0x0001 /* 12.5 Gbps */
98 #define OPA_LINK_SPEED_25G 0x0002 /* 25.78125? Gbps (EDR) */
108 #define OPA_CAP_MASK3_IsAddrRangeConfigSupported (1 << 5)
164 OPA_PI_MASK_PORT_LINK_ENABLED = (0x001F << 5),
181 OPA_PI_MASK_INTERLEAVE_MAX_NEST_TX = (0x001F << 5),
225 OPA_PI_MASK_VL_STALL = (0x03 << 5),
259 u8 cap; /* 3 res, 5 bits */
270 u8 smsl; /* 3 res, 5 bits */
[all …]
/openbmc/u-boot/board/freescale/t208xrdb/
H A DREADME19 - Up to four 10 Gbps Ethernet MACs
20 - Up to eight 1 Gbps Ethernet MACs
21 - Up to four 2.5 Gbps Ethernet MACs
24 - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
60 - Two on-board 10Gbps XFI fiber ports
61 - Two on-board 10Gbps Base-T copper ports
76 - Two type A ports with 5V@1.5A per port.
159 via DIP-switch: set SW3[5:7] = '100'
163 via DIP-Switch: set SW3[5:7] = '000'
/openbmc/u-boot/arch/arm/mach-mvebu/serdes/axp/
H A Dhigh_speed_env_spec.h57 * PEX 2.5 G (10 bit) 5 G (20 bit)
59 * SGMII 1.25 Gbps 3.125 Gbps
73 {0, 1, 2 , -1, 3, -1, -1, 4, -1}, /* Lane 5 */ \
/openbmc/linux/drivers/gpu/drm/i915/display/
H A Dintel_cx0_phy.c334 return 5; in intel_c10_get_tx_vboost_lvl()
338 return 5; in intel_c10_get_tx_vboost_lvl()
348 return 5; in intel_c10_get_tx_term_ctl()
435 .pll[5] = 0x0C,
461 .pll[5] = 0x10,
487 .pll[5] = 0x12,
513 .pll[5] = 0x0A,
539 .pll[5] = 0x0C,
565 .pll[5] = 0x10,
591 .pll[5] = 0x0A,
[all …]
/openbmc/linux/drivers/net/ethernet/hisilicon/hns3/hns3pf/
H A Dhclge_main.h113 #define HCLGE_PHY_MDIX_CTRL_S 5
114 #define HCLGE_PHY_MDIX_CTRL_M GENMASK(6, 5)
151 #define HCLGE_RESET_INT_M GENMASK(7, 5)
157 #define HCLGE_VECTOR0_GLOBALRESET_INT_B 5
168 #define HCLGE_VECTOR0_IMP_RD_POISON_B 5U
191 #define HCLGE_SUPPORT_40G_BIT BIT(5)
235 HCLGE_MAC_SPEED_1G = 1000, /* 1000 Mbps = 1 Gbps */
236 HCLGE_MAC_SPEED_10G = 10000, /* 10000 Mbps = 10 Gbps */
237 HCLGE_MAC_SPEED_25G = 25000, /* 25000 Mbps = 25 Gbps */
238 HCLGE_MAC_SPEED_40G = 40000, /* 40000 Mbps = 40 Gbps */
[all …]
/openbmc/u-boot/board/freescale/t102xqds/
H A DREADME23 - 150 Gbps coherent read bandwidth
28 - Cryptography Acceleration (SEC 5.x)
33 - Four 1 Gbps Ethernet controllers
37 - Three PCI Express 2.0 controllers/ports running at up to 5 GHz
102 - Four SGMII interface supporting 1Gbps
103 - Three SGMII interfaces supporting 2.5Gbps
104 - one 10Gbps XFI or 10Base-KR interface
136 - Two type A ports with 5V@1.5A per port.
/openbmc/linux/arch/arm64/boot/dts/marvell/
H A Darmada-8040-puzzle-m801.dts108 /* SFP+ port 2: 10 Gbps indicator */
115 /* SFP+ port 2: 1 Gbps indicator */
122 /* SFP+ port 1: 10 Gbps indicator */
128 led-5 {
129 /* SFP+ port 1: 1 Gbps indicator */
131 function-enumerator = <5>;
/openbmc/linux/Documentation/networking/device_drivers/ethernet/pensando/
H A Dionic.rst36 ionic 0000:b5:00.0 enp181s0: Link up - 100 Gbps
39 ionic 0000:b6:00.0 enp182s0: Link up - 100 Gbps
115 414 5 0 0 0 0
132 rx_packets: 5
179 frames_rx_multicast: 5
/openbmc/qemu/docs/
H A Drdma.txt107 Using a 40gbps infiniband link performing a worst-case stress test,
120 active use and the VM itself is completely idle using the same 40 gbps
123 1. rdma-pin-all disabled total time: approximately 7.5 seconds @ 9.5 Gbps
124 2. rdma-pin-all enabled total time: approximately 4 seconds @ 26 Gbps
182 5. Receiver accept()
210 5. RAM Blocks request (used right after connection setup)
223 After connection setup, message 5 & 6 are used to exchange ram block
240 5. Verify that the command-type and version received matches the one we expected.
255 5. Optionally, if we are expecting a response (as before),
419 5. Expose UNREGISTER support to the user by way of workload-specific
/openbmc/linux/drivers/usb/host/
H A Dxhci-hub.c25 0x00050034, /* USB 3.0 SS Gen1x1 id:4 symmetric rx 5Gbps */
26 0x000500b4, /* USB 3.0 SS Gen1x1 id:4 symmetric tx 5Gbps */
27 0x000a4035, /* USB 3.1 SSP Gen2x1 id:5 symmetric rx 10Gbps */
28 0x000a40b5, /* USB 3.1 SSP Gen2x1 id:5 symmetric tx 10Gbps */
29 0x00054036, /* USB 3.2 SSP Gen1x2 id:6 symmetric rx 5Gbps */
30 0x000540b6, /* USB 3.2 SSP Gen1x2 id:6 symmetric tx 5Gbps */
31 0x000a4037, /* USB 3.2 SSP Gen2x2 id:7 symmetric rx 10Gbps */
32 0x000a40b7, /* USB 3.2 SSP Gen2x2 id:7 symmetric tx 10Gbps */
169 /* Shift to Gbps and set SSP Link Protocol if 10Gpbs */ in xhci_create_usb3x_bos_desc()
186 * is 20Gbps, but the BOS descriptor lane speed mantissa is in xhci_create_usb3x_bos_desc()
[all …]
/openbmc/linux/fs/smb/client/
H A Dcifs_debug.c180 return "1Gbps"; in smb_speed_to_str()
182 return "2.5Gbps"; in smb_speed_to_str()
184 return "5Gbps"; in smb_speed_to_str()
186 return "10Gbps"; in smb_speed_to_str()
188 return "14Gbps"; in smb_speed_to_str()
190 return "20Gbps"; in smb_speed_to_str()
192 return "25Gbps"; in smb_speed_to_str()
194 return "40Gbps"; in smb_speed_to_str()
196 return "50Gbps"; in smb_speed_to_str()
198 return "56Gbps"; in smb_speed_to_str()
[all …]

1234567