/openbmc/linux/Documentation/devicetree/bindings/soc/qcom/ |
H A D | qcom,dcc.yaml | 40 dma@10a2000{
|
/openbmc/linux/drivers/rtc/ |
H A D | rtc-msm6242.c | 7 * Based on the A2000 TOD code in arch/m68k/amiga/config.c 24 MSM6242_SECOND10 = 0x1, /* 10-second digit register */ 26 MSM6242_MINUTE10 = 0x3, /* 10-minute digit register */ 28 MSM6242_HOUR10 = 0x5, /* PM/AM, 10-hour digit register */ 30 MSM6242_DAY10 = 0x7, /* 10-day digit register */ 32 MSM6242_MONTH10 = 0x9, /* 10-month digit register */ 34 MSM6242_YEAR10 = 0xb, /* 10-year digit register */ 120 tm->tm_sec = msm6242_read(priv, MSM6242_SECOND10) * 10 + in msm6242_read_time() 122 tm->tm_min = msm6242_read(priv, MSM6242_MINUTE10) * 10 + in msm6242_read_time() 125 MSM6242_HOUR10_HR_MASK) * 10 + in msm6242_read_time() [all …]
|
/openbmc/linux/arch/m68k/amiga/ |
H A D | config.c | 66 static char s_a2000[] __initdata = "A2000"; 436 disabled_z2mem>>10); in config_amiga() 727 if (ch == 10 || ch == 13) 787 seq_printf(m, "Chip RAM:\t%ldK\n", amiga_chip_size>>10); in amiga_get_hardware_list() 828 AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)"); in amiga_get_hardware_list()
|
/openbmc/u-boot/doc/uImage.FIT/ |
H A D | x86-fit-boot.txt | 98 10 __init_rodata 00001c3c 8159e0a4 0159e0a4 0059f0a4 2**2 104 13 .data 00063000 815a1000 015a1000 005a2000 2**12 199 Created: Tue Oct 7 10:57:24 2014 202 Created: Tue Oct 7 10:57:24 2014 214 Created: Tue Oct 7 10:57:24 2014
|
/openbmc/linux/drivers/gpu/drm/loongson/ |
H A D | lsdc_regs.h | 19 * 7A2000, 2K2000, 2K1000 etc. 232 * | 31:27 | 26:16 | 15:11 | 10 | 9 | 8 | 253 #define INT_CRTC0_IDBFU BIT(10) 338 #define HDMI_PHY_TERM_DET_EN BIT(10)
|
/openbmc/linux/arch/arm/boot/dts/broadcom/ |
H A D | bcm-cygnus.dtsi | 502 v3d: v3d@180a2000 { 531 <&pinctrl 10 152 1>, 537 <&pinctrl 24 130 10>, 575 <&pinctrl 142 10 1>;
|
/openbmc/linux/arch/arm/boot/dts/marvell/ |
H A D | dove.dtsi | 235 interrupts = <10>; 419 sata_phy0: sata-phy@a2000 { 553 pmx_gpio_10: pmx-gpio-10 {
|
/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | dm814x.dtsi | 99 &cppi41dma 10 0 &cppi41dma 11 0 106 &cppi41dma 9 1 &cppi41dma 10 1 290 mcspi3: spi@1a2000 {
|
H A D | am33xx-l4.dtsi | 65 <0x00003000 0x00203000 0x001000>, /* ap 10 */ 121 target-module@3000 { /* 0x44e03000, ap 10 0a.0 */ 169 <&am33xx_pinmux 26 10 2>, 497 <0x0001b000 0x0001b000 0x001000>, /* ap 10 */ 700 <0x00380000 0x00380000 0x001000>; /* ap 10 */ 1021 <0x00022000 0x00022000 0x001000>, /* ap 10 */ 1090 target-module@22000 { /* 0x48022000, ap 10 12.0 */ 1274 dmas = <&edma 10 2>, 1736 target-module@a2000 { /* 0x481a2000, ap 81 2e.0 */ 1865 <&am33xx_pinmux 22 56 10>;
|
H A D | am437x-l4.dtsi | 91 <0x00003000 0x00203000 0x001000>, /* ap 10 */ 126 target-module@3000 { /* 0x44e03000, ap 10 0a.0 */ 647 <0x00024000 0x00024000 0x001000>, /* ap 10 */ 722 target-module@24000 { /* 0x48024000, ap 10 1c.0 */ 884 dmas = <&edma 10 2>, 1321 target-module@a2000 { /* 0x481a2000, ap 69 2e.0 */
|
H A D | omap4-l4.dtsi | 35 <0x00058000 0x00058000 0x004000>, /* ap 10 */ 176 target-module@58000 { /* 0x4a058000, ap 10 0e.0 */ 1076 <0x00009000 0x00019000 0x001000>, /* ap 10 */ 1319 <0x00037000 0x00037000 0x001000>, /* ap 10 */ 2171 target-module@a2000 { /* 0x480a2000, ap 79 3a.0 */
|
H A D | omap5-l4.dtsi | 34 <0x00058000 0x00058000 0x001000>, /* ap 10 */ 253 target-module@58000 { /* 0x4a058000, ap 10 06.0 */ 983 <0x00037000 0x00037000 0x001000>, /* ap 10 */ 1926 target-module@a2000 { /* 0x480a2000, ap 75 02.0 */ 2338 <0x00009000 0x00019000 0x001000>, /* ap 10 */
|
H A D | dra7-l4.dtsi | 31 <0x00057000 0x00057000 0x001000>, /* ap 10 */ 223 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 342 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>, 362 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>, 1066 <0x00037000 0x00037000 0x001000>, /* ap 10 */ 2047 target-module@a2000 { /* 0x480a2000, ap 75 02.0 */ 2345 <0x00062000 0x00062000 0x001000>, /* ap 10 */ 3158 <0x00025000 0x00025000 0x001000>, /* ap 10 */ 4322 <0x00009000 0x00019000 0x001000>, /* ap 10 */
|
/openbmc/linux/arch/mips/kernel/ |
H A D | cpu-probe.c | 421 switch ((config0 & MIPS_CONF_AR) >> 10) { in decode_config0() 436 switch ((config0 & MIPS_CONF_AR) >> 10) { in decode_config0() 1721 * Also some early Loongson-3A2000 had wrong TLB type in Config in cpu_probe_loongson() 1727 c->ases &= ~MIPS_ASE_VZ; /* VZ of Loongson-3A2000/3000 is incomplete */ in cpu_probe_loongson()
|
H A D | perf_event_mipsxx.c | 161 * 2: Loongson-3A2000/3A3000 325 cntr_mask = (hwc->event_base >> 10) & 0xffff; in mipsxx_pmu_alloc_counter() 1395 [C(RESULT_ACCESS)] = { 10, CNTR_EVEN, T }, 1396 [C(RESULT_MISS)] = { 10, CNTR_ODD, T }, 1399 [C(RESULT_ACCESS)] = { 10, CNTR_EVEN, T }, 1400 [C(RESULT_MISS)] = { 10, CNTR_ODD, T },
|
/openbmc/linux/drivers/video/fbdev/ |
H A D | Kconfig | 242 found in the Amiga 1000 and most A500's and A2000's. If you intend 250 A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If 1545 Olivetti M700-10 systems.
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | am4372.dtsi | 79 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 492 spi2: spi@481a2000 { 782 dmas = <&edma 10>,
|
/openbmc/linux/arch/mips/ |
H A D | Kconfig | 432 Olivetti M700-10 workstations. 1291 3B1000, 3B1500, 3A2000, 3A3000 and 3A4000) processors. However, old 2112 default "10" 2462 # "MIPS R4400MC Errata, Processor Revision 1.0", erratum #10
|
/openbmc/linux/drivers/block/ |
H A D | amiflop.c | 128 #define ADK_PRECOMP0 (1<<13) /* 00=none, 01=140ns, 10=280ns, 11=500ns */ 130 #define ADK_WORDSYNC (1<<10) /* enable DSKSYNC auto DMA */ 450 motor_on_timer.expires = jiffies + HZ/10; in motor_on_callback() 468 on_attempts = 10; in fd_motor_on() 659 * RB: At least A500/A2000's df0: don't identify themselves. in fd_get_drive_id()
|
/openbmc/linux/drivers/nvme/host/ |
H A D | pci.c | 83 ret = kstrtouint(val, 10, &n); in io_queue_count_set() 2937 * Exclude some Kingston NV1 and A2000 devices from in check_vendor_combination_bug() 2963 * for 10 hours on a Lenovo N60z board. in check_vendor_combination_bug() 3484 { PCI_DEVICE(0x2646, 0x2263), /* KINGSTON A2000 NVMe SSD */
|
/openbmc/linux/arch/arm64/boot/dts/qcom/ |
H A D | sc7180.dtsi | 731 mboxes = <&apss_shared 10>; 2230 dma@10a2000 { 3251 compatible = "qcom,dsi-phy-10nm"; 3393 #qcom,sensors = <10>; 3599 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 4159 thermal-sensors = <&tsens0 10>;
|
H A D | sm8150.dtsi | 828 mboxes = <&apss_shared 10>; 1819 dma@10a2000 { 3647 <&pdc 10 IRQ_TYPE_EDGE_BOTH>, 4226 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 4737 thermal-sensors = <&tsens0 10>; 5177 thermal-sensors = <&tsens1 10>;
|
H A D | sdm845.dtsi | 1119 mboxes = <&apss_shared 10>; 2229 dma@10a2000 { 4115 <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>, 4656 compatible = "qcom,dsi-phy-10nm"; 4728 compatible = "qcom,dsi-phy-10nm"; 5250 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 5523 thermal-sensors = <&tsens0 10>;
|