/openbmc/linux/arch/arm/boot/dts/socionext/ |
H A D | milbeaut-m10v.dtsi | 15 #size-cells = <0>; 20 reg = <0xf00>; 25 reg = <0xf01>; 30 reg = <0xf02>; 35 reg = <0xf03>; 64 reg = <0x1d001000 0x1000>, 65 <0x1d002000 0x1000>; /* CPU I/f base and size */ 71 reg = <0x1d021000 0x1000>; 77 reg = <0x1e000050 0x20>; 78 interrupts = <0 91 4>; [all …]
|
/openbmc/linux/sound/soc/codecs/ |
H A D | rt712-sdca-sdw.h | 15 { 0x201a, 0x00 }, 16 { 0x201b, 0x00 }, 17 { 0x201c, 0x00 }, 18 { 0x201d, 0x00 }, 19 { 0x201e, 0x00 }, 20 { 0x201f, 0x00 }, 21 { 0x2029, 0x00 }, 22 { 0x202a, 0x00 }, 23 { 0x202d, 0x00 }, 24 { 0x202e, 0x00 }, [all …]
|
H A D | msm8916-wcd-analog.c | 19 #define CDC_D_REVISION1 (0xf000) 20 #define CDC_D_PERPH_SUBTYPE (0xf005) 21 #define CDC_D_INT_EN_SET (0xf015) 22 #define CDC_D_INT_EN_CLR (0xf016) 27 #define CDC_D_CDC_RST_CTL (0xf046) 29 #define RST_CTL_DIG_SW_RST_N_RESET 0 32 #define CDC_D_CDC_TOP_CLK_CTL (0xf048) 37 #define CDC_D_CDC_ANA_CLK_CTL (0xf049) 38 #define ANA_CLK_CTL_EAR_HPHR_CLK_EN_MASK BIT(0) 39 #define ANA_CLK_CTL_EAR_HPHR_CLK_EN BIT(0) [all …]
|
/openbmc/linux/arch/powerpc/boot/dts/fsl/ |
H A D | mpc8544ds.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x800000>; 44 partition@0 { 45 reg = <0x0 0x10000>; 50 reg = <0x20000 0x30000>; 56 reg = <0x200000 0x200000>; 62 reg = <0x400000 0x380000>; 67 reg = <0x780000 0x80000>; 82 phy0: ethernet-phy@0 { 83 interrupts = <10 1 0 0>; [all …]
|
H A D | p2020ds.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x8000000>; 44 ramdisk@0 { 45 reg = <0x0 0x03000000>; 50 reg = <0x03000000 0x00e00000>; 55 reg = <0x03e00000 0x00200000>; 60 reg = <0x04000000 0x00400000>; 65 reg = <0x04400000 0x03b00000>; 69 reg = <0x07f00000 0x00080000>; 74 reg = <0x07f80000 0x00080000>; [all …]
|
H A D | mpc8572ds.dtsi | 36 nor@0,0 { 40 reg = <0x0 0x0 0x8000000>; 44 partition@0 { 45 reg = <0x0 0x03000000>; 50 reg = <0x03000000 0x00e00000>; 56 reg = <0x03e00000 0x00200000>; 62 reg = <0x04000000 0x00400000>; 67 reg = <0x04400000 0x03b00000>; 72 reg = <0x07f00000 0x00060000>; 77 reg = <0x07f60000 0x00020000>; [all …]
|
/openbmc/linux/drivers/dma/ti/ |
H A D | k3-psil-j7200.c | 64 PSIL_PDMA_MCASP(0x4400), 65 PSIL_PDMA_MCASP(0x4401), 66 PSIL_PDMA_MCASP(0x4402), 68 PSIL_PDMA_XY_PKT(0x4600), 69 PSIL_PDMA_XY_PKT(0x4601), 70 PSIL_PDMA_XY_PKT(0x4602), 71 PSIL_PDMA_XY_PKT(0x4603), 72 PSIL_PDMA_XY_PKT(0x4604), 73 PSIL_PDMA_XY_PKT(0x4605), 74 PSIL_PDMA_XY_PKT(0x4606), [all …]
|
H A D | k3-psil-j784s4.c | 71 PSIL_PDMA_MCASP(0x4400), 72 PSIL_PDMA_MCASP(0x4401), 73 PSIL_PDMA_MCASP(0x4402), 74 PSIL_PDMA_MCASP(0x4403), 75 PSIL_PDMA_MCASP(0x4404), 77 PSIL_PDMA_XY_PKT(0x4600), 78 PSIL_PDMA_XY_PKT(0x4601), 79 PSIL_PDMA_XY_PKT(0x4602), 80 PSIL_PDMA_XY_PKT(0x4603), 81 PSIL_PDMA_XY_PKT(0x4604), [all …]
|
H A D | k3-psil-j721e.c | 72 PSIL_SA2UL(0x4000, 0), 73 PSIL_SA2UL(0x4001, 0), 74 PSIL_SA2UL(0x4002, 0), 75 PSIL_SA2UL(0x4003, 0), 77 PSIL_ETHERNET(0x4100), 78 PSIL_ETHERNET(0x4101), 79 PSIL_ETHERNET(0x4102), 80 PSIL_ETHERNET(0x4103), 82 PSIL_ETHERNET(0x4200), 83 PSIL_ETHERNET(0x4201), [all …]
|
/openbmc/linux/include/linux/mtd/ |
H A D | onenand_regs.h | 20 #define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000) 21 #define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200) 22 #define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010) 27 #define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000) 28 #define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001) 29 #define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002) 30 #define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003) 31 #define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004) 32 #define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005) 33 #define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006) [all …]
|
/openbmc/u-boot/include/linux/mtd/ |
H A D | onenand_regs.h | 23 #define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000) 24 #define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200) 25 #define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010) 30 #define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000) 31 #define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001) 32 #define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002) 33 #define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003) 34 #define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004) 35 #define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005) 36 #define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006) [all …]
|
/openbmc/linux/drivers/tty/vt/ |
H A D | defkeymap.c_shipped | 10 0xf200, 0xf01b, 0xf031, 0xf032, 0xf033, 0xf034, 0xf035, 0xf036, 11 0xf037, 0xf038, 0xf039, 0xf030, 0xf02d, 0xf03d, 0xf07f, 0xf009, 12 0xfb71, 0xfb77, 0xfb65, 0xfb72, 0xfb74, 0xfb79, 0xfb75, 0xfb69, 13 0xfb6f, 0xfb70, 0xf05b, 0xf05d, 0xf201, 0xf702, 0xfb61, 0xfb73, 14 0xfb64, 0xfb66, 0xfb67, 0xfb68, 0xfb6a, 0xfb6b, 0xfb6c, 0xf03b, 15 0xf027, 0xf060, 0xf700, 0xf05c, 0xfb7a, 0xfb78, 0xfb63, 0xfb76, 16 0xfb62, 0xfb6e, 0xfb6d, 0xf02c, 0xf02e, 0xf02f, 0xf700, 0xf30c, 17 0xf703, 0xf020, 0xf207, 0xf100, 0xf101, 0xf102, 0xf103, 0xf104, 18 0xf105, 0xf106, 0xf107, 0xf108, 0xf109, 0xf208, 0xf209, 0xf307, 19 0xf308, 0xf309, 0xf30b, 0xf304, 0xf305, 0xf306, 0xf30a, 0xf301, [all …]
|
/openbmc/linux/drivers/usb/serial/ |
H A D | visor.h | 17 #define HANDSPRING_VENDOR_ID 0x082d 18 #define HANDSPRING_VISOR_ID 0x0100 19 #define HANDSPRING_TREO_ID 0x0200 20 #define HANDSPRING_TREO600_ID 0x0300 22 #define PALM_VENDOR_ID 0x0830 23 #define PALM_M500_ID 0x0001 24 #define PALM_M505_ID 0x0002 25 #define PALM_M515_ID 0x0003 26 #define PALM_I705_ID 0x0020 27 #define PALM_M125_ID 0x0040 [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/sram/ |
H A D | sram.yaml | 159 reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */ 163 ranges = <0 0x5c000000 0x40000>; 166 reg = <0x100 0x50>; 170 reg = <0x1000 0x1000>; 175 reg = <0x20000 0x20000>; 190 reg = <0x02020000 0x54000>; 193 ranges = <0 0x02020000 0x54000>; 195 smp-sram@0 { 197 reg = <0x0 0x1000>; 202 reg = <0x53000 0x1000>; [all …]
|
/openbmc/linux/drivers/media/platform/samsung/s5p-mfc/ |
H A D | regs-mfc-v6.h | 20 #define S5P_FIMV_MEM_OFFSET_V6 0 22 #define S5P_FIMV_START_ADDR_V6 0x0000 23 #define S5P_FIMV_END_ADDR_V6 0xfd80 25 #define S5P_FIMV_REG_CLEAR_BEGIN_V6 0xf000 29 #define S5P_FIMV_RISC_ON_V6 0x0000 30 #define S5P_FIMV_RISC2HOST_INT_V6 0x003C 31 #define S5P_FIMV_HOST2RISC_INT_V6 0x0044 32 #define S5P_FIMV_RISC_BASE_ADDRESS_V6 0x0054 34 #define S5P_FIMV_MFC_RESET_V6 0x1070 36 #define S5P_FIMV_HOST2RISC_CMD_V6 0x1100 [all …]
|
/openbmc/linux/drivers/s390/char/ |
H A D | defkeymap.c | 15 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 16 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 17 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 18 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 19 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 20 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 21 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 22 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 23 0xf020, 0xf000, 0xf0e2, 0xf0e4, 0xf0e0, 0xf0e1, 0xf0e3, 0xf0e5, 24 0xf0e7, 0xf0f1, 0xf0a2, 0xf02e, 0xf03c, 0xf028, 0xf02b, 0xf07c, [all …]
|
/openbmc/qemu/disas/ |
H A D | m68k.c | 35 fields is contiguous. We number the bits with 0 being the most significant 67 /* Sign bit is always one bit long. 1 means negative, 0 means positive. */ 74 very large number (e.g., given the exp_bias of 0x3fff and a 64 143 /* Opcode table header for m680[01234]0/m6888[12]/m68851. 165 #define _m68k_undef 0 166 #define m68000 0x001 168 #define m68010 0x002 169 #define m68020 0x004 170 #define m68030 0x008 173 #define m68040 0x010 [all …]
|
/openbmc/linux/drivers/net/wireless/intersil/orinoco/ |
H A D | hermes.h | 52 #define HERMES_MAGIC (0x7d1f) 57 #define HERMES_CMD (0x00) 58 #define HERMES_PARAM0 (0x02) 59 #define HERMES_PARAM1 (0x04) 60 #define HERMES_PARAM2 (0x06) 61 #define HERMES_STATUS (0x08) 62 #define HERMES_RESP0 (0x0A) 63 #define HERMES_RESP1 (0x0C) 64 #define HERMES_RESP2 (0x0E) 65 #define HERMES_INFOFID (0x10) [all …]
|
/openbmc/linux/drivers/usb/misc/sisusbvga/ |
H A D | sisusbvga.c | 65 for (i = 0; i < NUMOBUFS; i++) { in sisusb_free_buffers() 77 for (i = 0; i < NUMOBUFS; i++) { in sisusb_free_urbs() 85 /* Level 0: USB transport layer */ 91 /* Return 1 if all free, 0 otherwise */ 96 for (i = 0; i < sisusb->numobufs; i++) { in sisusb_all_free() 99 return 0; in sisusb_all_free() 114 for (i = 0; i < sisusb->numobufs; i++) { in sisusb_kill_all_busy() 122 /* Return 1 if ok, 0 if error (not all complete within timeout) */ 137 for (i = 0; i < sisusb->numobufs; i++) { in sisusb_outurb_available() 139 if ((sisusb->urbstatus[i] & (SU_URB_BUSY|SU_URB_ALLOC)) == 0) in sisusb_outurb_available() [all …]
|
/openbmc/linux/drivers/net/wireless/intersil/hostap/ |
H A D | hostap_wlan.h | 21 #define GET_INT_PARM(var,idx) var[var[idx] < 0 ? 0 : idx] 76 #define LWNG_CAPHDR_VERSION 0x80211001 82 u8 silence; /* 27 .. 154; seems to be 0 */ 114 u8 tx_rate; /* Host AP only; 0 = firmware, or 10, 20, 55, 110 */ 147 #define HFA384X_LEVEL_TO_dBm(v) 0x100 + (v) * 100 / 255 - 100 224 #define HFA384X_SCAN_IN_PROGRESS 0 /* no results available yet */ 295 #define HFA384X_CMD_OFF 0x00 296 #define HFA384X_PARAM0_OFF 0x02 297 #define HFA384X_PARAM1_OFF 0x04 298 #define HFA384X_PARAM2_OFF 0x06 [all …]
|
/openbmc/qemu/hw/pci-host/ |
H A D | mv643xx.h | 22 #define MV64340_CS_0_BASE_ADDR 0x008 23 #define MV64340_CS_0_SIZE 0x010 24 #define MV64340_CS_1_BASE_ADDR 0x208 25 #define MV64340_CS_1_SIZE 0x210 26 #define MV64340_CS_2_BASE_ADDR 0x018 27 #define MV64340_CS_2_SIZE 0x020 28 #define MV64340_CS_3_BASE_ADDR 0x218 29 #define MV64340_CS_3_SIZE 0x220 33 #define MV64340_DEV_CS0_BASE_ADDR 0x028 34 #define MV64340_DEV_CS0_SIZE 0x030 [all …]
|
/openbmc/linux/include/linux/ |
H A D | mv643xx.h | 22 #define MV64340_CS_0_BASE_ADDR 0x008 23 #define MV64340_CS_0_SIZE 0x010 24 #define MV64340_CS_1_BASE_ADDR 0x208 25 #define MV64340_CS_1_SIZE 0x210 26 #define MV64340_CS_2_BASE_ADDR 0x018 27 #define MV64340_CS_2_SIZE 0x020 28 #define MV64340_CS_3_BASE_ADDR 0x218 29 #define MV64340_CS_3_SIZE 0x220 33 #define MV64340_DEV_CS0_BASE_ADDR 0x028 34 #define MV64340_DEV_CS0_SIZE 0x030 [all …]
|
/openbmc/phosphor-logging/extensions/openpower-pels/registry/ |
H A D | message_registry.json | 9 "ReasonCode": "0x1001", 31 "ReasonCode": "0x1002", 52 "ReasonCode": "0x1003", 68 "ReasonCode": "0x1004", 85 "ReasonCode": "0x1005", 102 "ReasonCode": "0x1006", 117 "ReasonCode": "0x1007", 146 "ReasonCode": "0x1008", 175 "ReasonCode": "0x1009", 204 "ReasonCode": "0x100A", [all …]
|
/openbmc/linux/drivers/media/pci/ngene/ |
H A D | ngene-cards.c | 47 struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, in i2c_io() 51 return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; in i2c_io() 56 struct i2c_msg msg = {.addr = adr, .flags = 0, in i2c_write() 59 return (i2c_transfer(adap, &msg, 1) == 1) ? 0 : -1; in i2c_write() 74 return (i2c_transfer(adapter, msgs, 1) == 1) ? 0 : -1; in i2c_read() 80 u8 msg[2] = {reg >> 8, reg & 0xff}; in i2c_read_reg16() 81 struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, in i2c_read_reg16() 85 return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; in i2c_read_reg16() 91 struct i2c_msg msgs[2] = {{.addr = adr, .flags = 0, in i2c_read_regs() 96 return (i2c_transfer(adapter, msgs, 2) == 2) ? 0 : -1; in i2c_read_regs() [all …]
|
/openbmc/linux/drivers/scsi/lpfc/ |
H A D | lpfc_hw.h | 23 #define FDMI_DID 0xfffffaU 24 #define NameServer_DID 0xfffffcU 25 #define Fabric_Cntl_DID 0xfffffdU 26 #define Fabric_DID 0xfffffeU 27 #define Bcast_DID 0xffffffU 28 #define Mask_DID 0xffffffU 29 #define CT_DID_MASK 0xffff00U 30 #define Fabric_DID_MASK 0xfff000U 31 #define WELL_KNOWN_DID_MASK 0xfffff0U 42 0 */ [all …]
|