/openbmc/u-boot/arch/arm/dts/ |
H A D | imx53-cx9020.dts | 11 #define MX53_PAD_EIM_D26__UART2_RXD_MUX 0x144 0x48c 0x880 0x2 0x0 12 #define MX53_PAD_EIM_D27__UART2_TXD_MUX 0x148 0x490 0x000 0x2 0x0 13 #define MX53_PAD_EIM_D28__UART2_RTS 0x14c 0x494 0x87c 0x2 0x0 14 #define MX53_PAD_EIM_D29__UART2_CTS 0x150 0x498 0x000 0x2 0x0 27 pinctrl-0 = <&pinctrl_hog>; 32 MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 33 MX53_PAD_GPIO_8__GPIO1_8 0x80000000 34 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 35 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 36 MX53_PAD_GPIO_1__GPIO1_1 0x80000000 [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx53-m53.dtsi | 14 reg = <0x70000000 0x20000000>, 15 <0xb0000000 0x20000000>; 37 pinctrl-0 = <&pinctrl_i2c2>; 43 reg = <0x41>; 44 id = <0>; 45 blocks = <0x5>; 46 interrupts = <6 0x0>; 48 irq-trigger = <0x1>; 54 st,ref-sel = <0>; 66 reg = <0x50>; [all …]
|
H A D | imx53-voipac-dmm-668.dtsi | 14 reg = <0x70000000 0x20000000>, 15 <0xb0000000 0x20000000>; 31 gpio = <&gpio3 31 0>; /* PEN */ 38 pinctrl-0 = <&pinctrl_hog>; 44 MX53_PAD_GPIO_16__GPIO7_11 0x80000000 46 MX53_PAD_GPIO_11__GPIO4_1 0x80000000 48 MX53_PAD_GPIO_12__GPIO4_2 0x80000000 54 MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000 55 MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000 56 MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000 [all …]
|
H A D | imx53-sk-imx53.dts | 29 reg = <0x70000000 0x20000000>; 53 pinctrl-0 = <&pinctrl_audmux>; 59 pinctrl-0 = <&pinctrl_can1>; 75 pinctrl-0 = <&pinctrl_ecspi1>; 82 pinctrl-0 = <&pinctrl_ecspi2>; 91 pinctrl-0 = <&pinctrl_esdhc1>; 97 pinctrl-0 = <&pinctrl_fec>; 105 #size-cells = <0>; 107 phy0: ethernet-phy@0 { 108 reg = <0>; [all …]
|
H A D | imx53-tx53.dtsi | 55 reg = <0x70000000 0>; 69 clock-frequency = <0>; 75 #clock-cells = <0>; 82 pinctrl-0 = <&pinctrl_gpio_key>; 95 pinctrl-0 = <&pinctrl_stk5led>; 124 pinctrl-0 = <&pinctrl_can_xcvr>; 134 pinctrl-0 = <&pinctrl_usbh1_vbus>; 145 pinctrl-0 = <&pinctrl_usbotg_vbus>; 167 pinctrl-0 = <&pinctrl_ssi1>; 173 pinctrl-0 = <&pinctrl_can1>; [all …]
|
/openbmc/linux/drivers/clk/socfpga/ |
H A D | clk-s10.c | 183 { STRATIX10_BOOT_CLK, "boot_clk", boot_mux, ARRAY_SIZE(boot_mux), 0, 184 0x0}, 186 0, 0x74}, 188 0, 0xe4}, 192 { STRATIX10_MAIN_MPU_BASE_CLK, "main_mpu_base_clk", "main_pll", NULL, 1, 0, 0x84}, 193 { STRATIX10_MAIN_NOC_BASE_CLK, "main_noc_base_clk", "main_pll", NULL, 1, 0, 0x88}, 194 { STRATIX10_PERI_MPU_BASE_CLK, "peri_mpu_base_clk", "periph_pll", NULL, 1, 0, 195 0xF4}, 196 { STRATIX10_PERI_NOC_BASE_CLK, "peri_noc_base_clk", "periph_pll", NULL, 1, 0, 197 0xF8}, [all …]
|
/openbmc/linux/crypto/ |
H A D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 204 "\xCF\xCE\x33\x52\x52\x4D\x04\x16\xA5\xA4\x41\xE7\x00\xAF\x46\x12" 235 "\xF7\x36\x8D\x07\xEE\xD4\x10\x43\xA4\x40\xD6\xB6\xF0\x74\x54\xF5" 256 "\x01\x99\xEB\x9F\x44\xAE\xF4\xFD\xA4\x93\xB8\x1A\x9E\x3D\x84\xF6" 264 "\xCF\xCE\x33\x52\x52\x4D\x04\x16\xA5\xA4\x41\xE7\x00\xAF\x46\x15" 268 "\xEB\x07\xDD\xDC\x01\x83\xA4\xD0\xAC\x9B\x54\xB0\x51\xF2\xB1\x3E" 275 "\x1B\x99\xA4\x95\x84\x98\x07\xFE\x39\xF9\x24\x5A\x98\x36\xDA\x3D" 291 "\xcc\x5e\xa4\x6c\xc3\x4d\x28\xef\xda\xaf\xec\x14\x92\xfc\xa3\x75" 319 "\x52\x41\xF4\xDA\x7B\xB7\x59\x55\xCA\xD4\x2F\x0F\x3A\xCB\xA4\x0D" [all …]
|
/openbmc/u-boot/lib/at91/ |
H A D | microchip_logo_8bpp.h | 13 #define MICROCHIP_LOGO_8BPP_X_OFFSET 0 14 #define MCIROCHIP_LOGO_8BPP_Y_OFFSET 0 18 0x42, 0x4d, 0xb6, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x04, 19 0x00, 0x00, 0x28, 0x00, 0x00, 0x00, 0xd0, 0x00, 0x00, 0x00, 0x38, 0x00, 20 0x00, 0x00, 0x01, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x2d, 21 0x00, 0x00, 0x74, 0x12, 0x00, 0x00, 0x74, 0x12, 0x00, 0x00, 0x00, 0x00, 22 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 23 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x00, 0x80, 0x00, 24 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x80, 0x00, 0x00, 0xc0, 0xc0, 25 0xc0, 0x00, 0xc0, 0xdc, 0xc0, 0x00, 0xf0, 0xca, 0xa6, 0x00, 0x00, 0x20, [all …]
|
/openbmc/linux/drivers/ata/pata_parport/ |
H A D | frpw.c | 23 #define cec4 w2(0xc);w2(0xe);w2(0xe);w2(0xc);w2(4);w2(4);w2(4); 24 #define j44(l,h) (((l>>4)&0x0f)|(h&0xf0)) 27 * cont = 0 - access the IDE register file 30 static int cont_map[2] = { 0x08, 0x10 }; 62 case 0: in frpw_read_block_int() 64 for (k = 0; k < count; k++) { in frpw_read_block_int() 74 w2(4); w0(regr + 0xc0); cec4; in frpw_read_block_int() 75 w0(0xff); in frpw_read_block_int() 76 for (k = 0; k < count; k++) { in frpw_read_block_int() 77 w2(0xa4 + ph); in frpw_read_block_int() [all …]
|
H A D | friq.c | 33 w2(4); w0(0xff); w0(0xff); w0(0x73); w0(0x73); \ 34 w0(0xc9); w0(0xc9); w0(0x26); \ 35 w0(0x26); w0(x); w0(x); \ 36 } while (0) 38 #define j44(l, h) (((l >> 4) & 0x0f) | (h & 0xf0)) 41 * cont = 0 - access the IDE register file 44 static int cont_map[2] = { 0x08, 0x10 }; 74 case 0: in friq_read_block_int() 76 for (k = 0; k < count; k++) { in friq_read_block_int() 85 CMD(regr + 0xc0); in friq_read_block_int() [all …]
|
/openbmc/linux/drivers/gpu/drm/panel/ |
H A D | panel-samsung-s6e8aa0.c | 34 #define PANELCTL_SS_1_800 (0 << 5) 41 #define PANELCTL_CLK1_000 (0 << 3) 43 #define PANELCTL_CLK2_CON_MASK (7 << 0) 44 #define PANELCTL_CLK2_000 (0 << 0) 45 #define PANELCTL_CLK2_001 (1 << 0) 48 #define PANELCTL_INT1_000 (0 << 3) 50 #define PANELCTL_INT2_CON_MASK (7 << 0) 51 #define PANELCTL_INT2_000 (0 << 0) 52 #define PANELCTL_INT2_001 (1 << 0) 55 #define PANELCTL_BICTL_000 (0 << 3) [all …]
|
/openbmc/linux/drivers/media/usb/gspca/ |
H A D | nw80x.c | 159 * - 3rd byte: data length (=0 for end of sequence) 162 #define I2C0 0xff 165 0x04, 0x05, 0x01, 0x61, 166 0x04, 0x04, 0x01, 0x01, 167 0x04, 0x06, 0x01, 0x04, 168 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 169 0x05, 0x05, 0x01, 0x00, 170 0, 0, 0 173 0x04, 0x06, 0x01, 0xc0, 174 0x00, 0x00, 0x40, 0x10, 0x43, 0x00, 0xb4, 0x01, 0x10, 0x00, 0x4f, [all …]
|
/openbmc/linux/drivers/scsi/aic7xxx/ |
H A D | aic7xxx_seq.h_shipped | 9 0xb2, 0x00, 0x00, 0x08, 10 0xf7, 0x11, 0x22, 0x08, 11 0x00, 0x65, 0xee, 0x59, 12 0xf7, 0x01, 0x02, 0x08, 13 0xff, 0x6a, 0x24, 0x08, 14 0x40, 0x00, 0x40, 0x68, 15 0x08, 0x1f, 0x3e, 0x10, 16 0x40, 0x00, 0x40, 0x68, 17 0xff, 0x40, 0x3c, 0x60, 18 0x08, 0x1f, 0x3e, 0x10, [all …]
|
/openbmc/linux/crypto/asymmetric_keys/ |
H A D | selftest.c | 92 "\x7b\x2e\x4b\x46\x57\xb8\x29\x24\xb2\xfd\xee\x2c\x0d\xa4\x83\xfa" 97 "\x31\xbf\x91\x58\x0a\xe1\x25\x3d\x38\xd3\xa4\xf0\x59\x34\x47\x07" 104 "\x6e\x90\x6c\x54\x3a\x82\x25\x41\xcb\x18\x6a\xa4\x22\xa8\xa1\xc4" 147 "\x88\xe0\xa4\xe2\xcd\x73\x2b\x9e\xb2\x05\x7e\x12\xf8\xd0\x66\x41" 152 "\xcb\xa4\xfa\x77\xbb\x50\x24\x0b\x8b\x88\x99\x15\x56\xa9\x1e\x92" 158 "\x95\x3b\xa4\xbc\x29\x2b\x53\x67\x45\x1b\x0d\xbc\x13\xa5\x76\x31" 161 "\x1b\x81\x9f\x18\x45\xa4\xc6\x70\x3e\x0e\xf0\xd3\x7b\x9c\x10\xbe" 199 if (ret < 0) in fips_signature_selftest() 202 for (i = 0; i < ARRAY_SIZE(certs_tests); i++) { in fips_signature_selftest() 213 if (ret < 0) in fips_signature_selftest() [all …]
|
/openbmc/linux/fs/nls/ |
H A D | nls_cp949.c | 17 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x00-0x07 */ 18 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x08-0x0F */ 19 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x10-0x17 */ 20 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x18-0x1F */ 21 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x20-0x27 */ 22 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x28-0x2F */ 23 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x30-0x37 */ 24 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x38-0x3F */ 25 0x0000,0xAC02,0xAC03,0xAC05,0xAC06,0xAC0B,0xAC0C,0xAC0D,/* 0x40-0x47 */ 26 0xAC0E,0xAC0F,0xAC18,0xAC1E,0xAC1F,0xAC21,0xAC22,0xAC23,/* 0x48-0x4F */ [all …]
|
H A D | nls_cp950.c | 17 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x00-0x07 */ 18 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x08-0x0F */ 19 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x10-0x17 */ 20 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x18-0x1F */ 21 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x20-0x27 */ 22 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x28-0x2F */ 23 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x30-0x37 */ 24 0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,0x0000,/* 0x38-0x3F */ 25 0x3000,0xFF0C,0x3001,0x3002,0xFF0E,0x2027,0xFF1B,0xFF1A,/* 0x40-0x47 */ 26 0xFF1F,0xFF01,0xFE30,0x2026,0x2025,0xFE50,0xFE51,0xFE52,/* 0x48-0x4F */ [all …]
|
/openbmc/linux/drivers/gpu/drm/ |
H A D | drm_edid_load.c | 31 return 0; in __drm_set_edid_firmware_path() 54 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 55 0x31, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 56 0x05, 0x16, 0x01, 0x03, 0x6d, 0x1b, 0x14, 0x78, 57 0xea, 0x5e, 0xc0, 0xa4, 0x59, 0x4a, 0x98, 0x25, 58 0x20, 0x50, 0x54, 0x01, 0x00, 0x00, 0x45, 0x40, 59 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 60 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0xa0, 0x0f, 61 0x20, 0x00, 0x31, 0x58, 0x1c, 0x20, 0x28, 0x80, 62 0x14, 0x00, 0x15, 0xd0, 0x10, 0x00, 0x00, 0x1e, [all …]
|
/openbmc/linux/lib/crypto/ |
H A D | aesgcm.c | 43 * Returns: 0 on success, or -EINVAL if @keysize or @authsize contain values 60 return 0; in aesgcm_expandkey() 67 while (len > 0) { in aesgcm_ghash() 101 while (len > 0) { in aesgcm_crypt() 197 "\x36\x7f\x1d\x57\xa4\xe7\x45\x5a"; 220 "\xe3\xaa\x21\x2f\x2c\x02\xa4\xe0" 242 "\xe3\xaa\x21\x2f\x2c\x02\xa4\xe0" 369 "\x00\xa4\x43\x54\x04\x54\x9b\x3b" 372 "\xa4\x1d\x2c\x31\xfb\x33\x7a\xb3" 374 "\x8b\xa4\xad\x96\x1c\x20\x53\xbe" [all …]
|
H A D | curve25519-selftest.c | 16 .private = { 0x77, 0x07, 0x6d, 0x0a, 0x73, 0x18, 0xa5, 0x7d, 17 0x3c, 0x16, 0xc1, 0x72, 0x51, 0xb2, 0x66, 0x45, 18 0xdf, 0x4c, 0x2f, 0x87, 0xeb, 0xc0, 0x99, 0x2a, 19 0xb1, 0x77, 0xfb, 0xa5, 0x1d, 0xb9, 0x2c, 0x2a }, 20 .public = { 0xde, 0x9e, 0xdb, 0x7d, 0x7b, 0x7d, 0xc1, 0xb4, 21 0xd3, 0x5b, 0x61, 0xc2, 0xec, 0xe4, 0x35, 0x37, 22 0x3f, 0x83, 0x43, 0xc8, 0x5b, 0x78, 0x67, 0x4d, 23 0xad, 0xfc, 0x7e, 0x14, 0x6f, 0x88, 0x2b, 0x4f }, 24 .result = { 0x4a, 0x5d, 0x9d, 0x5b, 0xa4, 0xce, 0x2d, 0xe1, 25 0x72, 0x8e, 0x3b, 0xf4, 0x80, 0x35, 0x0f, 0x25, [all …]
|
/openbmc/qemu/tests/unit/ |
H A D | test-crypto-afsplit.c | 45 "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" 63 "\x7b\x27\xab\x58\xe1\xa4\xca\xf6" 86 "\xa0\xa1\xa2\xa3\xa4\xa5\xa6\xa7" 110 return '0' + i; in hex() 121 for (i = 0; i < len; i++) { in hex_string() 122 hexstr[i * 2] = hex((bytes[i] >> 4) & 0xf); in hex_string() 123 hexstr[i * 2 + 1] = hex(bytes[i] & 0xf); in hex_string() 125 hexstr[len * 2] = '\0'; in hex_string() 159 memset(key, 0, data->blocklen); in test_afsplit() 185 g_assert(qcrypto_init(NULL) == 0); in main() [all …]
|
/openbmc/u-boot/include/ |
H A D | fsl_sfp.h | 37 u32 ospr; /* 0x200 */ 38 u32 ospr1; /* 0x204 */ 40 u32 fswpr; /* 0x218 FSL Section Write Protect */ 41 u32 fsl_uid; /* 0x21c FSL UID 0 */ 42 u32 fsl_uid_1; /* 0x220 FSL UID 0 */ 44 u32 srk_hash[8]; /* 0x254 Super Root Key Hash */ 45 u32 oem_uid; /* 0x274 OEM UID 0*/ 46 u32 oem_uid_1; /* 0x278 OEM UID 1*/ 47 u32 oem_uid_2; /* 0x27c OEM UID 2*/ 48 u32 oem_uid_3; /* 0x280 OEM UID 3*/ [all …]
|
/openbmc/linux/tools/perf/tests/ |
H A D | pe-file-parsing.c | 30 0x5a, 0x0f, 0xd8, 0x82, 0xb5, 0x30, 0x84, 0x22, in run_dir() 31 0x4b, 0xa4, 0x7b, 0x62, 0x4c, 0x55, 0xa4, 0x69, in run_dir() 47 TEST_ASSERT_VAL("Failed to read debuglink", ret == 0); in run_dir() 62 TEST_ASSERT_VAL("Failed to load symbols", ret == 0); in run_dir()
|
/openbmc/linux/include/linux/mfd/wm8350/ |
H A D | comparator.h | 15 #define WM8350_DIGITISER_CONTROL_1 0x90 16 #define WM8350_DIGITISER_CONTROL_2 0x91 17 #define WM8350_AUX1_READBACK 0x98 18 #define WM8350_AUX2_READBACK 0x99 19 #define WM8350_AUX3_READBACK 0x9A 20 #define WM8350_AUX4_READBACK 0x9B 21 #define WM8350_CHIP_TEMP_READBACK 0x9F 22 #define WM8350_GENERIC_COMPARATOR_CONTROL 0xA3 23 #define WM8350_GENERIC_COMPARATOR_1 0xA4 24 #define WM8350_GENERIC_COMPARATOR_2 0xA5 [all …]
|
/openbmc/linux/drivers/media/i2c/cx25840/ |
H A D | cx25840-vbi.c | 25 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, in decode_vps() 26 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, in decode_vps() 27 0xd2, 0x5a, 0x52, 0xd2, 0x96, 0x1e, 0x16, 0x96, in decode_vps() 28 0x92, 0x1a, 0x12, 0x92, 0xd2, 0x5a, 0x52, 0xd2, in decode_vps() 29 0xd0, 0x58, 0x50, 0xd0, 0x94, 0x1c, 0x14, 0x94, in decode_vps() 30 0x90, 0x18, 0x10, 0x90, 0xd0, 0x58, 0x50, 0xd0, in decode_vps() 31 0xf0, 0x78, 0x70, 0xf0, 0xb4, 0x3c, 0x34, 0xb4, in decode_vps() 32 0xb0, 0x38, 0x30, 0xb0, 0xf0, 0x78, 0x70, 0xf0, in decode_vps() 33 0xe1, 0x69, 0x61, 0xe1, 0xa5, 0x2d, 0x25, 0xa5, in decode_vps() 34 0xa1, 0x29, 0x21, 0xa1, 0xe1, 0x69, 0x61, 0xe1, in decode_vps() [all …]
|
/openbmc/linux/arch/arm/boot/dts/st/ |
H A D | stih418.dtsi | 12 #size-cells = <0>; 17 /* u-boot puts hpen in SBC dmem at 0xa4 offset */ 18 cpu-release-addr = <0x94100A4>; 24 /* u-boot puts hpen in SBC dmem at 0xa4 offset */ 25 cpu-release-addr = <0x94100A4>; 31 #phy-cells = <0>; 32 st,syscfg = <&syscfg_core 0xf8 0xf4>; 40 #phy-cells = <0>; 41 st,syscfg = <&syscfg_core 0xfc 0xf4>; 54 reg = <0x9a03c00 0x100>; [all …]
|