/openbmc/linux/drivers/scsi/aic7xxx/ |
H A D | aic7xxx_seq.h_shipped | 9 0xb2, 0x00, 0x00, 0x08, 10 0xf7, 0x11, 0x22, 0x08, 11 0x00, 0x65, 0xee, 0x59, 12 0xf7, 0x01, 0x02, 0x08, 13 0xff, 0x6a, 0x24, 0x08, 14 0x40, 0x00, 0x40, 0x68, 15 0x08, 0x1f, 0x3e, 0x10, 16 0x40, 0x00, 0x40, 0x68, 17 0xff, 0x40, 0x3c, 0x60, 18 0x08, 0x1f, 0x3e, 0x10, [all …]
|
/openbmc/linux/drivers/media/usb/gspca/ |
H A D | sonixj.c | 64 #define BRIDGE_SN9C102P 0 94 #define F_PDN_INV 0x01 /* inverse pin S_PWR_DN / sn_xxx tables */ 95 #define F_ILLUM 0x02 /* presence of illuminator */ 98 /* register 0x01 */ 99 #define S_PWR_DN 0x01 /* sensor power down */ 100 #define S_PDN_INV 0x02 /* inverse pin S_PWR_DN */ 101 #define V_TX_EN 0x04 /* video transfer enable */ 102 #define LED 0x08 /* output to pin LED */ 103 #define SCL_SEL_OD 0x20 /* open-drain mode */ 104 #define SYS_SEL_48M 0x40 /* system clock 0: 24MHz, 1: 48MHz */ [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx7d-smegw01.dts | 31 reg = <0x80000000 0x20000000>; 37 pinctrl-0 = <&pinctrl_lte_on>; 49 pinctrl-0 = <&pinctrl_lte_nreset>; 63 pinctrl-0 = <&pinctrl_wifi>; 72 pinctrl-0 = <&pinctrl_rfkill>; 84 pinctrl-0 = <&pinctrl_usbotg1_pwr_gpio>; 95 pinctrl-0 = <&pinctrl_ecspi1>; 99 sram@0 { 101 reg = <0>; 108 pinctrl-0 = <&pinctrl_enet1>; [all …]
|
H A D | imx1-pinfunc.h | 15 * function: 0 - Primary function 18 * direction: 0 - Input 20 * gpio_oconf: 0 - A_IN 24 * gpio_iconfa/b: 0 - GPIO_IN 26 * 2 - 0 29 * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 31 * the pin number on the specific port (between 0 and 31). 34 #define MX1_PAD_A24__A24 0x00 0x004 35 #define MX1_PAD_A24__GPIO1_0 0x00 0x032 36 #define MX1_PAD_A24__SPI2_CLK 0x00 0x006 [all …]
|
/openbmc/linux/crypto/ |
H A D | testmgr.h | 33 * @ksize: Length of @key in bytes (0 if no key) 103 * @crypt_error: When @novrfy=0, the expected error from encrypt(). When 257 "\x32\x12\x4E\xF0\x23\x6E\x5D\x1E\x3B\x7E\x28\xFA\xE7\xAA\x04\x0A" 305 "\xBD\xB6\xBF\xEA\xA7\x5C\x06\xA9\x5D\x69\x84\x45\xD7\xF5\x05\xBA" 309 "\x59\x9F\x45\xE8\x5D\x1A\x45\x76\x04\x56\x05\xA1\xD0\x1B\x8C\x77" 311 "\xBA\x2A\xBC\xF4\xA0\x08\xF5\x13\x98\x13\x5D\xF0\xD9\x33\x34\x2A" 324 "\xEF\x7F\x60\xE4\xE6\x05\x82\x89\x5D\xDF\xC6\xD2\x6C\x07\x91\x33" 346 "\x00\xDF\xB7\x52\xB6\xD7\xC0\xE2\x96\xE7\xC9\xFE\x5D\x71\x5A\xC4" 352 "\x3E\x45\x18\x99\x1B\x41\x64\x43\xEE\x97\x5D\x77\x13\x5B\x74\x69" 361 "\x64\x3B\x8B\xA9\x33\xB3\xC5\x94\x9B\x4C\x5D\x9C\x7C\x46\xA4\xA5" [all …]
|
/openbmc/u-boot/include/ |
H A D | linux_logo.h | 11 * values have to start from 0x20 12 * (i.e. RGB(linux_logo_red[0], 13 * linux_logo_green[0], 14 * linux_logo_blue[0]) is color 0x20) 24 0x02, 0x9E, 0xE9, 0xC4, 0x50, 0xC9, 0xC4, 0xE9, 25 0x65, 0xE3, 0xC2, 0x25, 0xA4, 0xEC, 0x90, 0xA6, 26 0xC4, 0x6A, 0xD1, 0xF3, 0x12, 0xED, 0xA0, 0xC2, 27 0xB8, 0xD5, 0xDB, 0xD2, 0x3E, 0x16, 0xEB, 0x54, 28 0xA9, 0xCD, 0xF5, 0x0A, 0xBA, 0xB3, 0xDC, 0x74, 29 0xCE, 0xF6, 0xD3, 0xC5, 0xEA, 0xB8, 0xED, 0x5E, [all …]
|
/openbmc/qemu/tests/tcg/hexagon/ |
H A D | hvx_histogram_input.h | 18 { 0x26, 0x32, 0x2e, 0x2e, 0x2d, 0x2c, 0x2d, 0x2d, 19 0x2c, 0x2e, 0x31, 0x33, 0x36, 0x39, 0x3b, 0x3f, 20 0x42, 0x46, 0x4a, 0x4c, 0x51, 0x53, 0x53, 0x54, 21 0x56, 0x57, 0x58, 0x57, 0x56, 0x52, 0x51, 0x4f, 22 0x4c, 0x49, 0x47, 0x42, 0x3e, 0x3b, 0x38, 0x35, 23 0x33, 0x30, 0x2e, 0x2c, 0x2b, 0x2a, 0x2a, 0x28, 24 0x28, 0x27, 0x27, 0x28, 0x29, 0x2a, 0x2c, 0x2e, 25 0x2f, 0x33, 0x36, 0x38, 0x3c, 0x3d, 0x40, 0x42, 26 0x43, 0x42, 0x43, 0x44, 0x43, 0x41, 0x40, 0x3b, 27 0x3b, 0x3a, 0x38, 0x35, 0x32, 0x2f, 0x2c, 0x29, [all …]
|
/openbmc/phosphor-logging/test/openpower-pels/ |
H A D | pel_values_test.cpp | 25 auto s = findByValue(0x5D, subsystemValues); in TEST() 27 EXPECT_EQ(0x5D, std::get<fieldValuePos>(*s)); in TEST() 32 EXPECT_EQ(0x58, std::get<fieldValuePos>(*s)); in TEST() 36 s = findByValue(0xFF, subsystemValues); in TEST()
|
/openbmc/linux/Documentation/devicetree/bindings/input/touchscreen/ |
H A D | goodix.yaml | 34 enum: [ 0x5d, 0x14 ] 70 #size-cells = <0>; 73 reg = <0x5d>; 75 interrupts = <0 0>; 76 irq-gpios = <&gpio1 0 0>; 77 reset-gpios = <&gpio1 1 0>;
|
/openbmc/linux/crypto/asymmetric_keys/ |
H A D | selftest.c | 41 "\x1c\x0a\x61\x82\x3b\x4f\x2c\xa3\x95\x2c\x08\x58\x4b\xb1\x5d\x99" 70 "\x90\x2d\x18\x48\x8f\x28\xfe\x5d\xa7\xcd\x99\x9e\xbd\x02\x6c\x8a" 72 "\x21\x02\x03\x01\x00\x01\xa3\x5d\x30\x5b\x30\x0c\x06\x03\x55\x1d" 100 "\x8c\x24\x6c\xbf\x0f\x5d\x37\x39\xcf\x45\xc1\x93\x3a\xd2\xed\x5c" 145 "\x23\x99\xcf\x7d\x20\xb2\x39\x01\xc0\x12\xce\xd7\x5d\x2f\xb6\xab" 153 "\xbf\x5d\x94\x77\xb6\xf1\x67\x01\x60\x06\x58\x5c\xdf\x18\x52\x79" 199 if (ret < 0) in fips_signature_selftest() 202 for (i = 0; i < ARRAY_SIZE(certs_tests); i++) { in fips_signature_selftest() 213 if (ret < 0) in fips_signature_selftest() 217 if (ret < 0) in fips_signature_selftest() [all …]
|
/openbmc/linux/tools/perf/pmu-events/arch/x86/broadwellde/ |
H A D | memory.json | 4 "EventCode": "0xc8", 9 "UMask": "0x4" 13 "EventCode": "0xc8", 17 "UMask": "0x8" 21 "EventCode": "0xc8", 25 "UMask": "0x10" 29 "EventCode": "0xc8", 33 "UMask": "0x20" 37 "EventCode": "0xc8", 41 "UMask": "0x40" [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/input/ |
H A D | goodix,gt7375p.yaml | 30 - 0x5d 31 - 0x14 77 #size-cells = <0>; 81 reg = <0x5d>;
|
/openbmc/linux/tools/perf/pmu-events/arch/x86/haswell/ |
H A D | memory.json | 4 "EventCode": "0xc8", 8 "UMask": "0x4" 12 "EventCode": "0xc8", 15 "UMask": "0x8" 19 "EventCode": "0xc8", 22 "UMask": "0x10" 26 "EventCode": "0xc8", 29 "UMask": "0x20" 34 "EventCode": "0xc8", 37 "UMask": "0x40" [all …]
|
/openbmc/linux/fs/xfs/ |
H A D | xfs_dahash_test.c | 20 0x5b, 0x85, 0x21, 0xcb, 0x09, 0x68, 0x7d, 0x30, 21 0xc7, 0x69, 0xd7, 0x30, 0x92, 0xde, 0x59, 0xe4, 22 0xc9, 0x6e, 0x8b, 0xdb, 0x98, 0x6b, 0xaa, 0x60, 23 0xa8, 0xb5, 0xbc, 0x6c, 0xa9, 0xb1, 0x5b, 0x2c, 24 0xea, 0xb4, 0x92, 0x6a, 0x3f, 0x79, 0x91, 0xe4, 25 0xe9, 0x70, 0x51, 0x8c, 0x7f, 0x95, 0x6f, 0x1a, 26 0x56, 0xa1, 0x5c, 0x27, 0x03, 0x67, 0x9f, 0x3a, 27 0xe2, 0x31, 0x11, 0x29, 0x6b, 0x98, 0xfc, 0xc4, 28 0x53, 0x24, 0xc5, 0x8b, 0xce, 0x47, 0xb2, 0xb9, 29 0x32, 0xcb, 0xc1, 0xd0, 0x03, 0x57, 0x4e, 0xd4, [all …]
|
/openbmc/linux/tools/perf/pmu-events/arch/x86/broadwellx/ |
H A D | memory.json | 4 "EventCode": "0xc8", 9 "UMask": "0x4" 13 "EventCode": "0xc8", 17 "UMask": "0x8" 21 "EventCode": "0xc8", 25 "UMask": "0x10" 29 "EventCode": "0xc8", 33 "UMask": "0x20" 37 "EventCode": "0xc8", 41 "UMask": "0x40" [all …]
|
/openbmc/linux/lib/crypto/ |
H A D | blake2s-selftest.c | 28 * for (i = 0; i < len; i++) { 29 * if (i && (i % 12) == 0) 31 * printf("0x%02x, ", vec[i]); 43 * key[0] = key[1] = 1; 47 * for (i = 0; i < BLAKE2S_TESTVEC_COUNT; ++i) 52 * for (i = 0; i < BLAKE2S_TESTVEC_COUNT; ++i) { 62 * return 0; 66 { 0xa1, }, 67 { 0x7c, 0x89, }, 68 { 0x74, 0x0e, 0xd4, }, [all …]
|
H A D | chacha20poly1305-selftest.c | 31 0x49, 0x6e, 0x74, 0x65, 0x72, 0x6e, 0x65, 0x74, 32 0x2d, 0x44, 0x72, 0x61, 0x66, 0x74, 0x73, 0x20, 33 0x61, 0x72, 0x65, 0x20, 0x64, 0x72, 0x61, 0x66, 34 0x74, 0x20, 0x64, 0x6f, 0x63, 0x75, 0x6d, 0x65, 35 0x6e, 0x74, 0x73, 0x20, 0x76, 0x61, 0x6c, 0x69, 36 0x64, 0x20, 0x66, 0x6f, 0x72, 0x20, 0x61, 0x20, 37 0x6d, 0x61, 0x78, 0x69, 0x6d, 0x75, 0x6d, 0x20, 38 0x6f, 0x66, 0x20, 0x73, 0x69, 0x78, 0x20, 0x6d, 39 0x6f, 0x6e, 0x74, 0x68, 0x73, 0x20, 0x61, 0x6e, 40 0x64, 0x20, 0x6d, 0x61, 0x79, 0x20, 0x62, 0x65, [all …]
|
/openbmc/u-boot/lib/ |
H A D | crc7.c | 14 0x00, 0x09, 0x12, 0x1b, 0x24, 0x2d, 0x36, 0x3f, 15 0x48, 0x41, 0x5a, 0x53, 0x6c, 0x65, 0x7e, 0x77, 16 0x19, 0x10, 0x0b, 0x02, 0x3d, 0x34, 0x2f, 0x26, 17 0x51, 0x58, 0x43, 0x4a, 0x75, 0x7c, 0x67, 0x6e, 18 0x32, 0x3b, 0x20, 0x29, 0x16, 0x1f, 0x04, 0x0d, 19 0x7a, 0x73, 0x68, 0x61, 0x5e, 0x57, 0x4c, 0x45, 20 0x2b, 0x22, 0x39, 0x30, 0x0f, 0x06, 0x1d, 0x14, 21 0x63, 0x6a, 0x71, 0x78, 0x47, 0x4e, 0x55, 0x5c, 22 0x64, 0x6d, 0x76, 0x7f, 0x40, 0x49, 0x52, 0x5b, 23 0x2c, 0x25, 0x3e, 0x37, 0x08, 0x01, 0x1a, 0x13, [all …]
|
/openbmc/linux/tools/perf/pmu-events/arch/x86/haswellx/ |
H A D | memory.json | 4 "EventCode": "0xc8", 8 "UMask": "0x4" 12 "EventCode": "0xc8", 15 "UMask": "0x8" 19 "EventCode": "0xc8", 22 "UMask": "0x10" 26 "EventCode": "0xc8", 29 "UMask": "0x20" 34 "EventCode": "0xc8", 37 "UMask": "0x40" [all …]
|
/openbmc/linux/drivers/media/dvb-frontends/ |
H A D | m88ds3103_priv.h | 23 #define M88RS6000_CHIP_ID 0x74 24 #define M88DS3103_CHIP_ID 0x70 26 #define M88DS3103_CHIPTYPE_3103 0 60 {0x23, 0x07}, 61 {0x08, 0x03}, 62 {0x0c, 0x02}, 63 {0x21, 0x54}, 64 {0x25, 0x8a}, 65 {0x27, 0x31}, 66 {0x30, 0x08}, [all …]
|
/openbmc/linux/arch/arm64/boot/dts/qcom/ |
H A D | sm8150-microsoft-surface-duo.dts | 64 regulators-0 { 368 reg = <0x55>; 373 reg = <0x4a>; 376 pinctrl-0 = <&da7280_intr_default>; 389 0x06 0x08 0x10 0x11 0x12 0x13 0x14 0x15 0x1c 0x2a 390 0x33 0x3c 0x42 0x4b 0x4c 0x4e 0x17 0x19 0x27 0x29 391 0x17 0x19 0x03 0x84 0x5e 0x04 0x08 0x84 0x5d 0x01 392 0x84 0x5e 0x02 0x00 0xa4 0x5d 0x03 0x84 0x5e 0x06 393 0x08 0x84 0x5d 0x05 0x84 0x5d 0x06 0x84 0x5e 0x08 394 0x84 0x5e 0x05 0x8c 0x5e 0x24 0x84 0x5f 0x10 0x84 [all …]
|
/openbmc/linux/net/wireless/certs/ |
H A D | wens.hex | 2 0x30, 0x82, 0x02, 0xa7, 0x30, 0x82, 0x01, 0x8f, 3 0x02, 0x14, 0x61, 0xc0, 0x38, 0x65, 0x1a, 0xab, 4 0xdc, 0xf9, 0x4b, 0xd0, 0xac, 0x7f, 0xf0, 0x6c, 5 0x72, 0x48, 0xdb, 0x18, 0xc6, 0x00, 0x30, 0x0d, 6 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 7 0x01, 0x01, 0x0b, 0x05, 0x00, 0x30, 0x0f, 0x31, 8 0x0d, 0x30, 0x0b, 0x06, 0x03, 0x55, 0x04, 0x03, 9 0x0c, 0x04, 0x77, 0x65, 0x6e, 0x73, 0x30, 0x20, 10 0x17, 0x0d, 0x32, 0x33, 0x31, 0x32, 0x30, 0x31, 11 0x30, 0x37, 0x34, 0x31, 0x31, 0x34, 0x5a, 0x18, [all …]
|
/openbmc/linux/lib/ |
H A D | crc32test.c | 15 * There are various incantations of crc32(). Some use a seed of 0 or ~0. 16 * Some xor at the end with ~0. The generic crc32() function takes 19 * drivers/net/smc9194.c uses seed ~0, doesn't xor with ~0. 20 * fs/jffs2 uses seed 0, doesn't xor with ~0. 21 * fs/partitions/efi.c uses seed ~0, xor's with ~0. 36 0x5b, 0x85, 0x21, 0xcb, 0x09, 0x68, 0x7d, 0x30, 37 0xc7, 0x69, 0xd7, 0x30, 0x92, 0xde, 0x59, 0xe4, 38 0xc9, 0x6e, 0x8b, 0xdb, 0x98, 0x6b, 0xaa, 0x60, 39 0xa8, 0xb5, 0xbc, 0x6c, 0xa9, 0xb1, 0x5b, 0x2c, 40 0xea, 0xb4, 0x92, 0x6a, 0x3f, 0x79, 0x91, 0xe4, [all …]
|
/openbmc/openbmc/meta-hpe/meta-rl300-g11/recipes-hpe/power-sequencing/files/ |
H A D | rl300Start.sh | 8 devmem 0xd1000119 32 0x5d 12 devmem 0x80000074 16 0x0 14 currentVal=$(devmem 0xD100011A 8) 16 devmem 0xD100011A 8 "0x""${currentVal}"
|
/openbmc/qemu/tests/unit/ |
H A D | test-crypto-ivgen.c | 40 .sector = 0x1, 49 .sector = 0x1f2e3d4cULL, 58 .sector = 0x1f2e3d4c5b6a7988ULL, 67 .sector = 0x1, 76 .sector = 0x1f2e3d4cULL, 85 .sector = 0x1f2e3d4c5b6a7988ULL, 94 .sector = 0x1, 108 .sector = 0x1f2e3d4cULL, 115 .iv = (const uint8_t *)"\x5d\x36\x09\x5d\xc6\x9e\x5e\xe9" 122 .sector = 0x1f2e3d4c5b6a7988ULL, [all …]
|