Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38 |
|
#
f97fa3dc |
| 03-Jul-2023 |
Andy Shevchenko <andriy.shevchenko@linux.intel.com> |
lib/math: Move dvb_math.c into lib/math/int_log.c
Some existing and new users may benefit from the intlog2() and intlog10() APIs, make them wide available.
Reviewed-by: Mauro Carvalho Chehab <mcheh
lib/math: Move dvb_math.c into lib/math/int_log.c
Some existing and new users may benefit from the intlog2() and intlog10() APIs, make them wide available.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/20230619172019.21457-2-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230703135211.87416-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18 |
|
#
e6089fec |
| 01-Feb-2020 |
Brad Love <brad@nextdimension.cc> |
media: m88ds3103: Add support for ds3103b demod
The ds3103b demodulator identifies as an m88rs600, but requires different clock settings and firmware, along with differences in register settings.
C
media: m88ds3103: Add support for ds3103b demod
The ds3103b demodulator identifies as an m88rs600, but requires different clock settings and firmware, along with differences in register settings.
Changes were reverse engineered using an instrumented downstream GPLv2 driver to compare i2c traffic and clocking. The mclk functions are from the downstream GPLv2 driver.
Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
show more ...
|
Revision tags: v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
c942fddf |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of th
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
fada1935 |
| 28-Dec-2017 |
Mauro Carvalho Chehab <mchehab@s-opensource.com> |
media: move dvb kAPI headers to include/media
Except for DVB, all media kAPI headers are at include/media.
Move the headers to it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4 |
|
#
f5d9b88d |
| 29-Jun-2016 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: use Hz instead of kHz on calculations
There was some calculations where was kHz used in order to keep calculation withing 32-bit. Convert all to Hz and use 64-bit division helpers
[media] m88ds3103: use Hz instead of kHz on calculations
There was some calculations where was kHz used in order to keep calculation withing 32-bit. Convert all to Hz and use 64-bit division helpers where needed.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
show more ...
|
Revision tags: v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8 |
|
#
e00fed40 |
| 20-Apr-2016 |
Peter Rosin <peda@axentia.se> |
[media] m88ds3103: convert to use an explicit i2c mux core
Allocate an explicit i2c mux core to handle parent and child adapters etc. Update the select op to be in terms of the i2c mux core instead
[media] m88ds3103: convert to use an explicit i2c mux core
Allocate an explicit i2c mux core to handle parent and child adapters etc. Update the select op to be in terms of the i2c mux core instead of the child adapter.
Tested-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
show more ...
|
Revision tags: v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6 |
|
#
ecb7b018 |
| 16-Mar-2016 |
Peter Rosin <peda@axentia.se> |
[media] m88ds3103: fix undefined division
s32tmp in the below code may be negative, and dev->mclk_khz is an unsigned type.
s32tmp = 0x10000 * (tuner_frequency - c->frequency); s32tmp = DIV_ROUND_
[media] m88ds3103: fix undefined division
s32tmp in the below code may be negative, and dev->mclk_khz is an unsigned type.
s32tmp = 0x10000 * (tuner_frequency - c->frequency); s32tmp = DIV_ROUND_CLOSEST(s32tmp, dev->mclk_khz);
This is undefined, as DIV_ROUND_CLOSEST is undefined for negative dividends when the divisor is of unsigned type.
So, change mclk_khz to be signed (s32).
Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
show more ...
|
Revision tags: v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1 |
|
#
478932b1 |
| 16-Apr-2015 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: use regmap for I2C register access
Use regmap for I2C register access. Remove own I2C repeated mutex as it should not be needed. I2C adapter lock is already taken when I2C mux ada
[media] m88ds3103: use regmap for I2C register access
Use regmap for I2C register access. Remove own I2C repeated mutex as it should not be needed. I2C adapter lock is already taken when I2C mux adapter is called, no need for double locking.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
show more ...
|
#
7978b8a1 |
| 16-Apr-2015 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: rename variables and correct logging
Rename driver state from priv to dev. Use I2C client for correct logging. Use adapter and address from I2C client structure where needed.
Sig
[media] m88ds3103: rename variables and correct logging
Rename driver state from priv to dev. Use I2C client for correct logging. Use adapter and address from I2C client structure where needed.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
show more ...
|
#
0df289a2 |
| 07-Jun-2015 |
Mauro Carvalho Chehab <mchehab@osg.samsung.com> |
[media] dvb: Get rid of typedev usage for enums
The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage
[media] dvb: Get rid of typedev usage for enums
The DVB API was originally defined using typedefs. This is against Kernel CodingStyle, and there's no good usage here. While we can't remove its usage on userspace, we can avoid its usage in Kernelspace.
So, let's do it.
This patch was generated by this shell script:
for j in $(grep typedef include/uapi/linux/dvb/frontend.h |cut -d' ' -f 3); do for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f); do sed "s,${j}_t,enum $j," <$i >a && mv a $i; done; done
While here, make CodingStyle fixes on the affected lines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> # for drivers/media/firewire/*
show more ...
|
#
f01919e8 |
| 16-Apr-2015 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: add I2C client binding
Implement I2C client device binding. Wrap media attach to driver I2C probe. Add wrapper from m88ds3103_attach() to m88ds3103_probe() via driver core in orde
[media] m88ds3103: add I2C client binding
Implement I2C client device binding. Wrap media attach to driver I2C probe. Add wrapper from m88ds3103_attach() to m88ds3103_probe() via driver core in order to provide proper I2C client for legacy media attach binding.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
show more ...
|
#
ce80d713 |
| 14-Apr-2015 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: implement DVBv5 BER
Implement DVBv5 BER statistics. Wrap legacy DVBv3 BER to DVBv5 BER.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mcheha
[media] m88ds3103: implement DVBv5 BER
Implement DVBv5 BER statistics. Wrap legacy DVBv3 BER to DVBv5 BER.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
show more ...
|
Revision tags: v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3 |
|
#
f4df95bc |
| 30-Oct-2014 |
nibble.max <nibble.max@gmail.com> |
[media] m88ds3103: add support for the demod of M88RS6000
M88RS6000 is the integrated chip, which includes tuner and demod. Its internal demod is similar with M88DS3103 except some registers definit
[media] m88ds3103: add support for the demod of M88RS6000
M88RS6000 is the integrated chip, which includes tuner and demod. Its internal demod is similar with M88DS3103 except some registers definition.
The main different part of this internal demod from others is its clock/pll generation IP block sitting inside the tuner die. So clock/pll functions should be configed through its tuner i2c bus, NOT its demod i2c bus.
The demod of M88RS6000 need the firmware: dvb-demod-m88rs6000.fw firmware download link: http://www.dvbsky.net/download/linux/dvbsky-firmware.tar.gz
Signed-off-by: Nibble Max <nibble.max@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
show more ...
|
Revision tags: v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5 |
|
#
4423a2ba |
| 10-Jul-2014 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: implement BER
Implement read_ber for BER estimate.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
|
#
3ae266f8 |
| 10-Jul-2014 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: fix SNR reporting on 32-bit arch
There was 32-bit calculation overflow. Use div_u64.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@
[media] m88ds3103: fix SNR reporting on 32-bit arch
There was 32-bit calculation overflow. Use div_u64.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
show more ...
|
Revision tags: v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5 |
|
#
8a878dc4 |
| 18-Dec-2013 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: fix some style issues reported by checkpatch.pl
* remove Free Software Foundation postal address * add one pair of parenthesis * use sizeof(*foo), not sizeof(struct foo)
Signed-o
[media] m88ds3103: fix some style issues reported by checkpatch.pl
* remove Free Software Foundation postal address * add one pair of parenthesis * use sizeof(*foo), not sizeof(struct foo)
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
show more ...
|
Revision tags: v3.13-rc4, v3.13-rc3 |
|
#
dcaf0fbf |
| 02-Dec-2013 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: add default value for reg 56
Reg 0x56 should be programmed to 0x01. Add default to inittab.
Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Antti Palosaari <crope
[media] m88ds3103: add default value for reg 56
Reg 0x56 should be programmed to 0x01. Add default to inittab.
Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
show more ...
|
#
58b7450d |
| 02-Dec-2013 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: remove unneeded AGC from inittab
Optimal AGC is highly depended on used RF tuner and due to that it is already included to chip configuration. However, inittab has default AGC val
[media] m88ds3103: remove unneeded AGC from inittab
Optimal AGC is highly depended on used RF tuner and due to that it is already included to chip configuration. However, inittab has default AGC value, which was later replaced by one from config.
Add also comment to all chip configuration options about default values and if those are needed to set or not.
Reported-by: David Howells <dhowells@redhat.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
show more ...
|
Revision tags: v3.13-rc2, v3.13-rc1 |
|
#
44b9055b |
| 19-Nov-2013 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: use I2C mux for tuner I2C adapter
Switch standard I2C adapter to muxed I2C adapter.
David reported that I2C adapter implementation caused deadlock. I discussed with Jean and he s
[media] m88ds3103: use I2C mux for tuner I2C adapter
Switch standard I2C adapter to muxed I2C adapter.
David reported that I2C adapter implementation caused deadlock. I discussed with Jean and he suggested to implement it as a multiplexed i2c adapter because tuner I2C bus could be seen like own I2C segment.
Reported-by: David Howells <dhowells@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
show more ...
|
Revision tags: v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1 |
|
#
395d00d1 |
| 25-Feb-2013 |
Antti Palosaari <crope@iki.fi> |
[media] Montage M88DS3103 DVB-S/S2 demodulator driver
DVB-S/S2 satellite television demodulator driver.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@
[media] Montage M88DS3103 DVB-S/S2 demodulator driver
DVB-S/S2 satellite television demodulator driver.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
show more ...
|
Revision tags: v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18 |
|
#
e6089fec |
| 01-Feb-2020 |
Brad Love <brad@nextdimension.cc> |
media: m88ds3103: Add support for ds3103b demod The ds3103b demodulator identifies as an m88rs600, but requires different clock settings and firmware, along with differences in register
media: m88ds3103: Add support for ds3103b demod The ds3103b demodulator identifies as an m88rs600, but requires different clock settings and firmware, along with differences in register settings. Changes were reverse engineered using an instrumented downstream GPLv2 driver to compare i2c traffic and clocking. The mclk functions are from the downstream GPLv2 driver. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
show more ...
|
Revision tags: v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6 |
|
#
c942fddf |
| 27-May-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
fada1935 |
| 28-Dec-2017 |
Mauro Carvalho Chehab <mchehab@s-opensource.com> |
media: move dvb kAPI headers to include/media Except for DVB, all media kAPI headers are at include/media. Move the headers to it. Signed-off-by: Mauro Carvalho Chehab <mch
media: move dvb kAPI headers to include/media Except for DVB, all media kAPI headers are at include/media. Move the headers to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4 |
|
#
f5d9b88d |
| 29-Jun-2016 |
Antti Palosaari <crope@iki.fi> |
[media] m88ds3103: use Hz instead of kHz on calculations There was some calculations where was kHz used in order to keep calculation withing 32-bit. Convert all to Hz and use 64-bit
[media] m88ds3103: use Hz instead of kHz on calculations There was some calculations where was kHz used in order to keep calculation withing 32-bit. Convert all to Hz and use 64-bit division helpers where needed. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
show more ...
|
#
78975f23 |
| 19-May-2016 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'i2c/for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - Peter Rosin did some major rework on the locking of i2c
Merge branch 'i2c/for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - Peter Rosin did some major rework on the locking of i2c muxes by seperating parent-locked muxes and mux-locked muxes. This avoids deadlocks/workarounds when the mux itself needs i2c commands for muxing. And as a side-effect, other workarounds in the media layer could be eliminated. Also, Peter stepped up as the i2c mux maintainer and will keep an eye on these changes. - major updates to the octeon driver - add a helper to the core to generate the address+rw_bit octal and make drivers use it - quite a bunch of driver updates * 'i2c/for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (84 commits) i2c: rcar: add DMA support i2c: st: Implement bus clear i2c: only check scl functions when using generic recovery i2c: algo-bit: declare i2c_bit_quirk_no_clk_stretch as static i2c: tegra: disable clock before returning error [media] rtl2832: regmap is aware of lockdep, drop local locking hack [media] rtl2832_sdr: get rid of empty regmap wrappers [media] rtl2832: change the i2c gate to be mux-locked [media] si2168: change the i2c gate to be mux-locked iio: imu: inv_mpu6050: change the i2c gate to be mux-locked i2c: mux: document i2c muxes and elaborate on parent-/mux-locked muxes i2c: mux: relax locking of the top i2c adapter during mux-locked muxing i2c: muxes always lock the parent adapter i2c: allow adapter drivers to override the adapter locking i2c: uniphier: add "\n" at the end of error log i2c: mv64xxx: remove CONFIG_HAVE_CLK conditionals i2c: mv64xxx: use clk_{prepare_enable,disable_unprepare} i2c: mv64xxx: handle probe deferral for the clock i2c: mv64xxx: enable the driver on ARCH_MVEBU i2c: octeon: Add workaround for broken irqs on CN3860 ...
show more ...
|