/openbmc/qemu/tests/qemu-iotests/ |
H A D | 073 | 25 seq=`basename $0` 34 trap "_cleanup; exit \$status" 0 1 2 3 15 56 $QEMU_IO -c "write -P 0xa5 0 $size" "$TEST_IMG.base" | _filter_qemu_io 61 $QEMU_IO -c "write -P 0x11 0 0x10000" "$TEST_IMG" | _filter_qemu_io 62 $QEMU_IO -c "write -P 0x11 0x10000 0x10000" "$TEST_IMG.base" | _filter_qemu_io 64 $QEMU_IO -c "read -P 0x11 0 0x20000" "$TEST_IMG" | _filter_qemu_io 69 $QEMU_IO -c "write -P 0x22 0x20000 0x10000" "$TEST_IMG" | _filter_qemu_io 70 $QEMU_IO -c "write -c -P 0x22 0x30000 0x10000" "$TEST_IMG" | _filter_qemu_io 72 $QEMU_IO -c "read -P 0x22 0x20000 0x20000" "$TEST_IMG" | _filter_qemu_io 77 $QEMU_IO -c "write -P 0x33 0x40000 0x20000" "$TEST_IMG" | _filter_qemu_io [all …]
|
H A D | 312 | 31 seq=`basename $0` 38 _rm_test_img "$TEST_IMG.0" 44 trap "_cleanup; exit \$status" 0 1 2 3 15 60 TEST_IMG="$TEST_IMG.0" _make_test_img -o cluster_size=64k 10M 66 quorum="$quorum,file.children.0.file.filename=$TEST_IMG.0" 69 quorum="$quorum,file.children.0.driver=$IMGFMT" 87 # Three data regions, the largest one (0x30000) will be picked, end result: 88 # offset 0x10000, length 0x30000 -> data 89 $QEMU_IO -c "write -P 0 $((0x10000)) $((0x10000))" "$TEST_IMG.0" | _filter_qemu_io 90 $QEMU_IO -c "write -P 0 $((0x10000)) $((0x30000))" "$TEST_IMG.1" | _filter_qemu_io [all …]
|
/openbmc/linux/drivers/gpu/drm/nouveau/nvkm/engine/sec/fuc/ |
H A D | g98.fuc0s | 23 ctx_dma_query: .b32 0 24 ctx_dma_src: .b32 0 25 ctx_dma_dst: .b32 0 27 ctx_query_address_high: .b32 0 28 ctx_query_address_low: .b32 0 29 ctx_query_counter: .b32 0 30 ctx_cond_address_high: .b32 0 31 ctx_cond_address_low: .b32 0 32 ctx_cond_off: .b32 0 33 ctx_src_address_high: .b32 0 [all …]
|
/openbmc/openbmc/meta-hpe/meta-gxp/recipes-bsp/u-boot/u-boot-fw-utils-gxp/ |
H A D | fw_env.config | 10 #/dev/mtd1 0x0000 0x20000 0x20000 11 #/dev/mtd2 0x0000 0x4000 0x4000 15 #/dev/mtd2 0x00000 0x20000 16 /dev/mtd/u-boot-env 0x00000 0x10000 17 /dev/mtd/u-boot-env 0x10000 0x10000 18 #/dev/mtd5 0x4200 0x4200 19 #/dev/mtd6 0x4200 0x4200 22 #/dev/mtd0 0x4000 0x4000 0x20000 2 25 #/dev/mmcblk0 0xc0000 0x20000
|
H A D | alt_fw_env.config | 10 #/dev/mtd1 0x0000 0x20000 0x20000 11 #/dev/mtd2 0x0000 0x4000 0x4000 15 #/dev/mtd2 0x00000 0x20000 16 /dev/mtd/alt-u-boot-env 0x00000 0x10000 17 /dev/mtd/alt-u-boot-env 0x10000 0x10000 18 #/dev/mtd5 0x4200 0x4200 19 #/dev/mtd6 0x4200 0x4200 22 #/dev/mtd0 0x4000 0x4000 0x20000 2 25 #/dev/mmcblk0 0xc0000 0x20000
|
/openbmc/openbmc/meta-aspeed/recipes-bsp/u-boot/files/ |
H A D | alt_fw_env.config | 10 #/dev/mtd1 0x0000 0x20000 0x20000 11 #/dev/mtd2 0x0000 0x4000 0x4000 15 #/dev/mtd2 0x00000 0x20000 16 /dev/mtd/alt-u-boot-env 0x00000 0x10000 17 /dev/mtd/alt-u-boot-env 0x10000 0x10000 18 #/dev/mtd5 0x4200 0x4200 19 #/dev/mtd6 0x4200 0x4200 22 #/dev/mtd0 0x4000 0x4000 0x20000 2 25 #/dev/mmcblk0 0xc0000 0x20000
|
H A D | fw_env.config | 10 #/dev/mtd1 0x0000 0x20000 0x20000 11 #/dev/mtd2 0x0000 0x4000 0x4000 15 #/dev/mtd2 0x00000 0x20000 16 /dev/mtd/u-boot-env 0x00000 0x10000 17 /dev/mtd/u-boot-env 0x10000 0x10000 18 #/dev/mtd5 0x4200 0x4200 19 #/dev/mtd6 0x4200 0x4200 22 #/dev/mtd0 0x4000 0x4000 0x20000 2 25 #/dev/mmcblk0 0xc0000 0x20000
|
/openbmc/linux/arch/arm/boot/dts/microchip/ |
H A D | tny_a9260_common.dtsi | 14 reg = <0x20000000 0x4000000>; 30 timer@0 { 32 reg = <0>, <1>; 51 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; 55 reg = <0x3 0x0 0x800000>; 68 at91bootstrap@0 { 70 reg = <0x0 0x20000>; 75 reg = <0x20000 0x40000>; 80 reg = <0x60000 0x20000>; 85 reg = <0x80000 0x20000>; [all …]
|
H A D | tny_a9263.dts | 19 reg = <0x20000000 0x4000000>; 39 timer@0 { 41 reg = <0>, <1>; 61 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; 65 reg = <0x3 0x0 0x800000>; 78 at91bootstrap@0 { 80 reg = <0x0 0x20000>; 85 reg = <0x20000 0x40000>; 90 reg = <0x60000 0x20000>; 95 reg = <0x80000 0x20000>; [all …]
|
H A D | usb_a9260_common.dtsi | 26 timer@0 { 28 reg = <0>, <1>; 53 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; 57 reg = <0x3 0x0 0x800000>; 70 at91bootstrap@0 { 72 reg = <0x0 0x20000>; 77 reg = <0x20000 0x40000>; 82 reg = <0x60000 0x20000>; 87 reg = <0x80000 0x20000>; 92 reg = <0xa0000 0x20000>; [all …]
|
H A D | usb_a9263.dts | 19 reg = <0x20000000 0x4000000>; 39 timer@0 { 41 reg = <0>, <1>; 63 flash@0 { 65 reg = <0>; 81 pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; 85 reg = <0x3 0x0 0x800000>; 98 at91bootstrap@0 { 100 reg = <0x0 0x20000>; 105 reg = <0x20000 0x40000>; [all …]
|
H A D | at91-qil_a9260.dts | 18 reg = <0x20000000 0x4000000>; 34 timer@0 { 36 reg = <0>, <1>; 51 pinctrl-0 = < 57 slot@0 { 58 reg = <0>; 64 pinctrl-0 = 75 pinctrl-0 = 83 pinctrl-0 = 99 m41t94@0 { [all …]
|
/openbmc/u-boot/doc/ |
H A D | README.commands.spl | 20 nand read 0x82000000 0x280000 0x400000 /* Read kernel image from NAND*/ 22 nand erase 0x680000 0x20000 /* erase - one page */ 23 nand write 0x80000100 0x680000 0x20000 /* write the image - one page */ 27 nand read 0x82000000 0x280000 0x400000 /* Read kernel image from NAND*/ 28 tftpboot 0x80000100 devkit8000.dtb /* Read fdt */ 29 spl export fdt 0x82000000 - 0x80000100 /* export FDT */ 30 nand erase 0x680000 0x20000 /* erase - one page */ 31 nand write <adress shown by spl export> 0x680000 0x20000
|
/openbmc/linux/arch/arm64/boot/dts/apple/ |
H A D | t6002.dtsi | 70 reg = <0x0 0x800>; 72 cpu-release-addr = <0 0>; /* To be filled by loader */ 74 i-cache-size = <0x20000>; 75 d-cache-size = <0x10000>; 84 reg = <0x0 0x801>; 86 cpu-release-addr = <0 0>; /* To be filled by loader */ 88 i-cache-size = <0x20000>; 89 d-cache-size = <0x10000>; 98 reg = <0x0 0x10900>; 100 cpu-release-addr = <0 0>; /* To be filled by loader */ [all …]
|
H A D | t600x-common.dtsi | 16 #size-cells = <0>; 59 cpu_e00: cpu@0 { 62 reg = <0x0 0x0>; 64 cpu-release-addr = <0 0>; /* To be filled by loader */ 66 i-cache-size = <0x20000>; 67 d-cache-size = <0x10000>; 76 reg = <0x0 0x1>; 78 cpu-release-addr = <0 0>; /* To be filled by loader */ 80 i-cache-size = <0x20000>; 81 d-cache-size = <0x10000>; [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | usb_a9263.dts | 20 reg = <0x20000000 0x4000000>; 52 mtd_dataflash@0 { 54 reg = <0>; 71 at91bootstrap@0 { 73 reg = <0x0 0x20000>; 78 reg = <0x20000 0x40000>; 83 reg = <0x60000 0x20000>; 88 reg = <0x80000 0x20000>; 93 reg = <0xa0000 0x20000>; 98 reg = <0xc0000 0x400000>; [all …]
|
H A D | at91sam9g20ek_common.dtsi | 17 reg = <0x20000000 0x4000000>; 55 pinctrl-0 = 80 pinctrl-0 = < 95 pinctrl-0 = <&pinctrl_ssc0_tx>; 99 cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; 100 mtd_dataflash@0 { 113 atmel,rtt-rtc-time-reg = <&gpbr 0x0>; 132 at91bootstrap@0 { 134 reg = <0x0 0x20000>; 139 reg = <0x20000 0x40000>; [all …]
|
H A D | keystone-k2hk-netcp.dtsi | 18 queue-range = <0 0x4000>; 19 linkram0 = <0x100000 0x8000>; 20 linkram1 = <0x0 0x10000>; 27 managed-queues = <0 0x2000>; 28 reg = <0x2a40000 0x20000>, 29 <0x2a06000 0x400>, 30 <0x2a02000 0x1000>, 31 <0x2a03000 0x1000>, 32 <0x23a80000 0x20000>, 33 <0x2a80000 0x20000>; [all …]
|
H A D | at91sam9263ek.dts | 22 reg = <0x20000000 0x4000000>; 43 pinctrl-0 = < 61 pinctrl-0 = < 67 slot@0 { 68 reg = <0>; 87 cs-gpios = <&pioA 5 0>, <0>, <0>, <0>; 88 mtd_dataflash@0 { 91 reg = <0>; 100 fb0: fb@0x00700000 { 107 atmel,dmacon = <0x1>; [all …]
|
/openbmc/linux/arch/powerpc/boot/dts/fsl/ |
H A D | c293si-post.dtsi | 39 interrupts = <19 2 0 0>; 42 /* controller at 0xa000 */ 48 bus-range = <0 255>; 50 interrupts = <16 2 0 0>; 52 pcie@0 { 53 reg = <0 0 0 0 0>; 58 interrupts = <16 2 0 0>; 59 interrupt-map-mask = <0xf800 0 0 7>; 61 /* IDSEL 0x0 */ 62 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 [all …]
|
/openbmc/u-boot/tools/env/ |
H A D | fw_env.config | 7 # Device offset must be prefixed with 0x to be parsed as a hexadecimal value. 11 /dev/mtd1 0x0000 0x4000 0x4000 12 /dev/mtd2 0x0000 0x4000 0x4000 16 #/dev/mtd5 0x4200 0x4200 17 #/dev/mtd6 0x4200 0x4200 20 #/dev/mtd0 0x4000 0x4000 0x20000 2 26 #/dev/mmcblk0 0xc0000 0x20000 27 #/dev/mmcblk0 -0x20000 0x20000 30 #/boot/uboot.env 0x0000 0x4000 33 #/dev/ubi0_0 0x0 0x1f000 0x1f000 [all …]
|
/openbmc/u-boot/doc/SPI/ |
H A D | README.ti_qspi_dra_test | 11 U-Boot# mmc dev 0 13 U-Boot# fatload mmc 0 0x82000000 MLO 16 U-Boot# fatload mmc 0 0x83000000 u-boot.img 23 U-Boot# sf probe 0 25 U-Boot# sf erase 0 0x10000 26 SF: 65536 bytes @ 0x0 Erased: OK 27 U-Boot# sf erase 0x20000 0x10000 28 SF: 65536 bytes @ 0x20000 Erased: OK 29 U-Boot# sf erase 0x30000 0x10000 30 SF: 65536 bytes @ 0x30000 Erased: OK [all …]
|
/openbmc/u-boot/include/configs/ |
H A D | amcore.h | 15 #define CONFIG_SYS_UART_PORT 0 21 "protect off 0xffc00000 0xffc1ffff; " \ 22 "erase 0xffc00000 0xffc1ffff; " \ 23 "cp.b 0x20000 0xffc00000 ${filesize}\0" \ 25 "erase 0xffc20000 0xffefffff; " \ 26 "cp.b 0x20000 0xffc20000 ${filesize}\0" \ 28 "erase 0xfff00000 0xffffffff; " \ 29 "cp.b 0x20000 0xfff00000 ${filesize}\0" 35 #define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */ 37 #define CONFIG_SYS_MEMTEST_START 0x0 [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6qp.dtsi | 11 reg = <0x00940000 0x20000>; 12 ranges = <0 0x00940000 0x20000>; 20 reg = <0x00960000 0x20000>; 21 ranges = <0 0x00960000 0x20000>; 30 reg = <0x021c8000 0x1000>; 39 reg = <0x021c9000 0x1000>; 48 reg = <0x021ca000 0x1000>; 57 reg = <0x021cb000 0x1000>; 66 reg = <0x021cc000 0x1000>; 75 reg = <0x021cd000 0x1000>; [all …]
|
/openbmc/linux/drivers/accel/habanalabs/include/gaudi2/ |
H A D | gaudi2_special_blocks.h | 16 { GAUDI2_BLOCK_TYPE_TPC, 0xfc008000, 4, 6, 0, 0x200000, 0x10000, 0x0 }, \ 17 { GAUDI2_BLOCK_TYPE_TPC, 0xfc00a000, 4, 6, 0, 0x200000, 0x10000, 0x0 }, \ 18 { GAUDI2_BLOCK_TYPE_TPC, 0xfc00b000, 4, 6, 0, 0x200000, 0x10000, 0x0 }, \ 19 { GAUDI2_BLOCK_TYPE_TPC, 0xfc00c000, 4, 6, 0, 0x200000, 0x10000, 0x0 }, \ 20 { GAUDI2_BLOCK_TYPE_HMMU, 0xfc080000, 4, 4, 0, 0x200000, 0x10000, 0x0 }, \ 21 { GAUDI2_BLOCK_TYPE_HMMU, 0xfc081000, 4, 4, 0, 0x200000, 0x10000, 0x0 }, \ 22 { GAUDI2_BLOCK_TYPE_HMMU, 0xfc083000, 4, 4, 0, 0x200000, 0x10000, 0x0 }, \ 23 { GAUDI2_BLOCK_TYPE_HMMU, 0xfc084000, 4, 4, 0, 0x200000, 0x10000, 0x0 }, \ 24 { GAUDI2_BLOCK_TYPE_MME, 0xfc0c8000, 4, 0, 0, 0x200000, 0x0, 0x0 }, \ 25 { GAUDI2_BLOCK_TYPE_MME, 0xfc0c9000, 4, 0, 0, 0x200000, 0x0, 0x0 }, \ [all …]
|