/openbmc/linux/arch/arm/include/uapi/asm/ |
H A D | unistd.h | 17 #define __NR_OABI_SYSCALL_BASE 0x900000 18 #define __NR_SYSCALL_MASK 0x0fffff 21 #define __NR_SYSCALL_BASE 0 33 #define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000)
|
/openbmc/linux/drivers/staging/rtl8712/ |
H A D | rtl8712_ratectrl_bitdef.h | 11 #define _INIRTSMCS_SEL_MSK 0x3F 15 #define _RRSR_RSC_MSK 0x600000 17 #define _RRSR_BITMAP_MSK 0x0FFFFF 18 #define _RRSR_BITMAP_SHT 0 21 #define _AGGLMT_MCS32_MSK 0xF0 23 #define _AGGLMT_MCS15_SGI_MSK 0x0F 24 #define _AGGLMT_MCS15_SGI_SHT 0 30 #define _CCK_MSK 0xFF00 32 #define _BARKER_MSK 0x00FF 33 #define _BARKER_SHT 0
|
/openbmc/linux/Documentation/devicetree/bindings/bus/ |
H A D | palmbus.yaml | 19 pattern: "^palmbus(@[0-9a-f]+)?$" 37 "@[0-9a-f]+$": 62 reg = <0x1e000000 0x100000>; 65 ranges = <0x0 0x1e000000 0x0fffff>; 72 gpio-ranges = <&pinctrl 0 0 95>; 74 reg = <0x600 0x100>;
|
/openbmc/u-boot/board/freescale/t102xrdb/ |
H A D | README | 129 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB 130 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB 131 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB 132 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB 133 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB 134 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB 135 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB 136 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB 137 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB 138 0xF_0000_0000 0xF_003F_FFFF DCSR 4MB [all …]
|
/openbmc/linux/arch/mips/include/asm/sn/sn0/ |
H A D | hubpi.h | 24 #define PI_BASE 0x000000 28 #define PI_CPU_PROTECT 0x000000 /* CPU Protection */ 29 #define PI_PROT_OVERRD 0x000008 /* Clear CPU Protection bit */ 30 #define PI_IO_PROTECT 0x000010 /* Interrupt Pending Protection */ 31 #define PI_REGION_PRESENT 0x000018 /* Indicates whether region exists */ 32 #define PI_CPU_NUM 0x000020 /* CPU Number ID */ 33 #define PI_CALIAS_SIZE 0x000028 /* Cached Alias Size */ 34 #define PI_MAX_CRB_TIMEOUT 0x000030 /* Maximum Timeout for CRB */ 35 #define PI_CRB_SFACTOR 0x000038 /* Scale factor for CRB timeout */ 38 #define PI_CALIAS_SIZE_0 0 [all …]
|
/openbmc/u-boot/board/freescale/t208xrdb/ |
H A D | README | 89 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB 90 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB 91 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB 92 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB 93 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB 94 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB 95 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB 96 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB 97 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB 98 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB [all …]
|
/openbmc/u-boot/board/freescale/t104xrdb/ |
H A D | README | 22 - Support for 0x86 serdes protocol which can support following interfaces 30 T1040RDB T1040 0x66 Networking 31 T1040RDB T1042 0x86 Networking 32 T1042RDB_PI T1042 0x06 Printing & Imaging 33 T1040D4RDB T1040 0x66 Networking 34 T1042D4RDB T1042 0x86 Networking 168 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB 169 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB 170 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB 171 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB [all …]
|
/openbmc/u-boot/board/freescale/t208xqds/ |
H A D | README | 71 - Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB) 124 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB 125 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB 126 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB 127 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB 128 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB 129 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB 130 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB 131 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB 132 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB [all …]
|
/openbmc/linux/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/ |
H A D | hw.c | 107 for (rf_path = 0; rf_path < 2; rf_path++) { in _rtl92cu_read_txpower_info_from_hwpg() 108 for (i = 0; i < 3; i++) { in _rtl92cu_read_txpower_info_from_hwpg() 127 for (i = 0; i < 3; i++) { in _rtl92cu_read_txpower_info_from_hwpg() 133 (tempval & 0xf); in _rtl92cu_read_txpower_info_from_hwpg() 135 ((tempval & 0xf0) >> 4); in _rtl92cu_read_txpower_info_from_hwpg() 137 for (rf_path = 0; rf_path < 2; rf_path++) in _rtl92cu_read_txpower_info_from_hwpg() 138 for (i = 0; i < 3; i++) in _rtl92cu_read_txpower_info_from_hwpg() 140 "RF(%d) EEPROM CCK Area(%d) = 0x%x\n", in _rtl92cu_read_txpower_info_from_hwpg() 144 for (rf_path = 0; rf_path < 2; rf_path++) in _rtl92cu_read_txpower_info_from_hwpg() 145 for (i = 0; i < 3; i++) in _rtl92cu_read_txpower_info_from_hwpg() [all …]
|
/openbmc/u-boot/board/freescale/t102xqds/ |
H A D | README | 155 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB 156 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB 157 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB 158 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB 159 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB 160 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB 161 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB 162 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB 163 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB 164 0xF_E000_0000 0xF_E7FF_FFFF Promjet 128MB [all …]
|
/openbmc/linux/lib/xz/ |
H A D | xz_dec_bcj.c | 68 * PowerPC 4 0 69 * IA-64 16 0 70 * ARM 4 0 72 * SPARC 4 0 85 return b == 0x00 || b == 0xFF; in bcj_x86_test_msbyte() 93 static const uint8_t mask_to_bit_num[8] = { 0, 1, 2, 2, 3, 3, 3, 3 }; in bcj_x86() 104 return 0; in bcj_x86() 107 for (i = 0; i < size; ++i) { in bcj_x86() 108 if ((buf[i] & 0xFE) != 0xE8) in bcj_x86() 113 prev_mask = 0; in bcj_x86() [all …]
|
/openbmc/linux/drivers/media/dvb-frontends/ |
H A D | cxd2820r_c.c | 14 struct i2c_client *client = priv->client[0]; in cxd2820r_set_frontend_c() 21 { 0x00080, 0x01, 0xff }, in cxd2820r_set_frontend_c() 22 { 0x00081, 0x05, 0xff }, in cxd2820r_set_frontend_c() 23 { 0x00085, 0x07, 0xff }, in cxd2820r_set_frontend_c() 24 { 0x00088, 0x01, 0xff }, in cxd2820r_set_frontend_c() 26 { 0x00082, 0x20, 0x60 }, in cxd2820r_set_frontend_c() 27 { 0x1016a, 0x48, 0xff }, in cxd2820r_set_frontend_c() 28 { 0x100a5, 0x00, 0x01 }, in cxd2820r_set_frontend_c() 29 { 0x10020, 0x06, 0x07 }, in cxd2820r_set_frontend_c() 30 { 0x10059, 0x50, 0xff }, in cxd2820r_set_frontend_c() [all …]
|
H A D | cxd2820r_t.c | 14 struct i2c_client *client = priv->client[0]; in cxd2820r_set_frontend_t() 21 { 0x17, 0xea, 0xaa, 0xaa, 0xaa }, /* 6 MHz */ in cxd2820r_set_frontend_t() 22 { 0x14, 0x80, 0x00, 0x00, 0x00 }, /* 7 MHz */ in cxd2820r_set_frontend_t() 23 { 0x11, 0xf0, 0x00, 0x00, 0x00 }, /* 8 MHz */ in cxd2820r_set_frontend_t() 26 { 0x1f, 0xdc }, /* 6 MHz */ in cxd2820r_set_frontend_t() 27 { 0x12, 0xf8 }, /* 7 MHz */ in cxd2820r_set_frontend_t() 28 { 0x01, 0xe0 }, /* 8 MHz */ in cxd2820r_set_frontend_t() 31 { 0x00080, 0x00, 0xff }, in cxd2820r_set_frontend_t() 32 { 0x00081, 0x03, 0xff }, in cxd2820r_set_frontend_t() 33 { 0x00085, 0x07, 0xff }, in cxd2820r_set_frontend_t() [all …]
|
/openbmc/u-boot/board/freescale/t4qds/ |
H A D | README | 106 0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mappe… 107 0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory 108 0x0_f000_0000 (0xf_0000_0000) - 0x0_f1ff_ffff 32MB DCSR (includes trace buffers) 109 0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan 110 0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan 111 0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO 112 0x0_e000_0000 (0xf_e000_0000) - 0x0_efff_ffff 256MB NOR flash 113 0x0_fe00_0000 (0xf_fe00_0000) - 0x0_feff_ffff 16MB CCSR 114 0x0_ffdf_0000 (0xf_ffdf_0000) - 0x0_ffdf_03ff 4KB QIXIS 115 0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores [all …]
|
/openbmc/linux/arch/mips/boot/dts/ralink/ |
H A D | mt7621.dtsi | 14 #size-cells = <0>; 16 cpu@0 { 19 reg = <0>; 30 #address-cells = <0>; 56 reg = <0x1e000000 0x100000>; 57 ranges = <0x0 0x1e000000 0x0fffff>; 62 sysc: syscon@0 { 64 reg = <0x0 0x100>; 75 reg = <0x100 0x100>; 84 gpio-ranges = <&pinctrl 0 0 95>; [all …]
|
/openbmc/u-boot/doc/ |
H A D | README.b4860qds | 75 for Stand-alone mode and to the 1000Base-X over AMC MicroTCA connector ports 0 and 2 for 122 SW1 OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] 134 SW1 [1.1] = 0 139 SW2 [1.1] = 0 147 SW1 OFF[0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] OFF [0] 159 SW1 [1.1] = 0 164 SW2 [1.1] = 0 172 0xF_FFDF_1000 0xF_FFFF_FFFF Free 2 MB 173 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB 174 0xF_FF81_0000 0xF_FFDE_FFFF Free 5 MB [all …]
|
/openbmc/linux/arch/mips/include/asm/pci/ |
H A D | bridge.h | 30 #define BRIDGE_ATE_RAM_SIZE 0x00000400 /* 1kB ATE RAM */ 32 #define BRIDGE_CONFIG_BASE 0x20000 33 #define BRIDGE_CONFIG1_BASE 0x28000 34 #define BRIDGE_CONFIG_END 0x30000 35 #define BRIDGE_CONFIG_SLOT_SIZE 0x1000 37 #define BRIDGE_SSRAM_512K 0x00080000 /* 512kB */ 38 #define BRIDGE_SSRAM_128K 0x00020000 /* 128kB */ 39 #define BRIDGE_SSRAM_64K 0x00010000 /* 64kB */ 40 #define BRIDGE_SSRAM_0K 0x00000000 /* 0kB */ 48 #define ATE_V 0x01 [all …]
|
/openbmc/linux/sound/pci/pcxhr/ |
H A D | pcxhr_mixer.c | 25 #define PCXHR_LINE_CAPTURE_LEVEL_MIN 0 /* -112.0 dB */ 27 #define PCXHR_LINE_CAPTURE_ZERO_LEVEL 224 /* 0.0 dB ( 0 dBu -> 0 dBFS ) */ 29 #define PCXHR_LINE_PLAYBACK_LEVEL_MIN 0 /* -104.0 dB */ 31 #define PCXHR_LINE_PLAYBACK_ZERO_LEVEL 104 /* 0.0 dB ( 0 dBFS -> 0 dBu ) */ 47 rmh.cmd[0] |= IO_NUM_REG_IN_ANA_LEVEL; in pcxhr_update_analog_audio_level() 50 rmh.cmd[0] |= IO_NUM_REG_OUT_ANA_LEVEL; in pcxhr_update_analog_audio_level() 61 if (err < 0) { in pcxhr_update_analog_audio_level() 68 return 0; in pcxhr_update_analog_audio_level() 81 if (kcontrol->private_value == 0) { /* playback */ in pcxhr_analog_vol_info() 106 return 0; in pcxhr_analog_vol_info() [all …]
|
/openbmc/linux/drivers/scsi/qla2xxx/ |
H A D | qla_attr.c | 26 int rval = 0; in qla2x00_sysfs_read_fw_dump() 30 return 0; in qla2x00_sysfs_read_fw_dump() 53 rval = 0; in qla2x00_sysfs_read_fw_dump() 69 if (off != 0) in qla2x00_sysfs_write_fw_dump() 70 return (0); in qla2x00_sysfs_write_fw_dump() 74 case 0: in qla2x00_sysfs_write_fw_dump() 78 ql_log(ql_log_info, vha, 0x705d, in qla2x00_sysfs_write_fw_dump() 85 ha->fw_dump_reading = 0; in qla2x00_sysfs_write_fw_dump() 92 ql_log(ql_log_info, vha, 0x705e, in qla2x00_sysfs_write_fw_dump() 116 ql_dbg(ql_dbg_user, vha, 0x705b, in qla2x00_sysfs_write_fw_dump() [all …]
|
/openbmc/linux/drivers/media/usb/msi2500/ |
H A D | msi2500.c | 31 * iConfiguration 0 32 * bInterfaceNumber 0 35 * bEndpointAddress 0x81 EP 1 IN 38 * wMaxPacketSize 0x1400 3x 1024 bytes 58 .tuner = 0, 60 .index = 0, 78 #if 0 213 * Number 2 (0b10) was never seen. 245 unsigned int i, j, transactions, dst_len = 0; in msi2500_convert_stream() 251 for (i = 0; i < transactions; i++) { in msi2500_convert_stream() [all …]
|
/openbmc/linux/fs/fat/ |
H A D | inode.c | 11 * Max Cohan: Fixed invalid FSINFO offset when info_sector is 0 36 #define FAT_DATE_MIN (0<<9 | 1<<5 | 1) 78 .media = 0xFE, 85 .media = 0xFC, 92 .media = 0xFF, 99 .media = 0xFD, 135 return 0; in __fat_get_block() 138 return 0; in __fat_get_block() 180 return 0; in __fat_get_block() 194 return 0; in fat_get_block() [all …]
|
/openbmc/qemu/target/tricore/ |
H A D | translate.c | 85 return (ctx->features & (1ULL << feature)) != 0; in has_feature() 89 MODE_LL = 0, 110 for (i = 0; i < 16; ++i) { in tricore_cpu_dump_state() 111 if ((i & 3) == 0) { in tricore_cpu_dump_state() 116 for (i = 0; i < 16; ++i) { in tricore_cpu_dump_state() 117 if ((i & 3) == 0) { in tricore_cpu_dump_state() 134 } while (0) 144 } while (0) 156 } while (0) 168 } while (0) [all …]
|