| /openbmc/u-boot/include/environment/ti/ |
| H A D | dfu.h | 13 "boot part 0 1;" \
14 "rootfs part 0 2;" \
15 "MLO fat 0 1;" \
16 "MLO.raw raw 0x100 0x100;" \
17 "u-boot.img.raw raw 0x300 0x1000;" \
18 "u-env.raw raw 0x1300 0x200;" \
19 "spl-os-args.raw raw 0x1500 0x200;" \
20 "spl-os-image.raw raw 0x1700 0x6900;" \
21 "spl-os-args fat 0 1;" \
22 "spl-os-image fat 0 1;" \
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/mtd/partitions/ |
| H A D | nvmem-cells.yaml | 44 reg = <0x1200000 0x0140000>;
50 macaddr_gmac1: macaddr_gmac1@0 {
51 reg = <0x0 0x6>;
55 reg = <0x6 0x6>;
59 reg = <0x1000 0x2f20>;
63 reg = <0x5000 0x2f20>;
72 partition@0 {
74 reg = <0x000000 0x100000>;
81 reg = <0x100000 0xe00000>;
87 reg = <0xf00000 0x100000>;
[all …]
|
| H A D | fixed-partitions.yaml | 33 "@[0-9a-f]+$":
59 partition@0 {
61 reg = <0x0000000 0x100000>;
66 reg = <0x0100000 0x200000>;
77 partition@0 {
79 reg = <0x00000000 0x1 0x00000000>;
91 partition@0 {
93 reg = <0x0 0x00000000 0x2 0x00000000>;
99 reg = <0x2 0x00000000 0x1 0x00000000>;
109 partition@0 {
[all …]
|
| /openbmc/linux/arch/arm64/boot/dts/renesas/ |
| H A D | r8a77980-v3hsk.dts | 49 #size-cells = <0>;
51 port@0 {
52 reg = <0>;
70 reg = <0 0x48000000 0 0x78000000>;
75 #clock-cells = <0>;
79 vcc1v8_d4: regulator-0 {
101 clock-names = "du.0", "dclkin.0";
114 pinctrl-0 = <&gether_pins>;
122 phy0: ethernet-phy@0 {
126 reg = <0>;
[all …]
|
| H A D | r8a77970-v3msk.dts | 47 #size-cells = <0>;
49 port@0 {
50 reg = <0>;
68 reg = <0x0 0x48000000 0x0 0x78000000>;
73 #clock-cells = <0>;
77 vcc_d1_8v: regulator-0 {
106 pinctrl-0 = <&avb_pins>;
115 phy0: ethernet-phy@0 {
119 reg = <0>;
129 clock-names = "du.0", "dclkin.0";
[all …]
|
| H A D | r8a77970-eagle.dts | 59 #size-cells = <0>;
61 port@0 {
62 reg = <0>;
80 reg = <0x0 0x48000000 0x0 0x38000000>;
85 #clock-cells = <0>;
91 pinctrl-0 = <&avb_pins>;
100 phy0: ethernet-phy@0 {
104 reg = <0>;
112 pinctrl-0 = <&canfd0_pins>;
125 port@0 {
[all …]
|
| H A D | condor-common.dtsi | 36 d3_3v: regulator-0 {
62 #size-cells = <0>;
64 port@0 {
65 reg = <0>;
83 reg = <0 0x48000000 0 0x78000000>;
97 #clock-cells = <0>;
103 pinctrl-0 = <&canfd0_pins>;
116 port@0 {
118 clock-lanes = <0>;
130 port@0 {
[all …]
|
| /openbmc/u-boot/drivers/dma/ |
| H A D | fsl_dma.c | 17 #define FSL_DMA_MAX_SIZE (0x3ffffff)
64 volatile fsl_dma_t *dma = &dma_base->dma[0]; in dma_check()
76 if (status != 0) in dma_check()
84 volatile fsl_dma_t *dma = &dma_base->dma[0]; in dma_init()
88 out_dma32(&dma->sr, 0xffffffff); /* clear any errors */ in dma_init()
94 volatile fsl_dma_t *dma = &dma_base->dma[0]; in dmacpy()
100 out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF)); in dmacpy()
101 out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF)); in dmacpy()
128 return 0; in dmacpy()
140 uint *p = 0; in dma_meminit()
[all …]
|
| /openbmc/openbmc/meta-openembedded/meta-python/recipes-devtools/python/python3-pyruvate/ |
| H A D | 0001-musl-Define-SOCK_SEQPACKET-in-common-place.patch | 24 @@ -324,7 +324,6 @@ pub const MAP_SYNC: ::c_int = 0x080000;
35 pub const SIG_BLOCK: ::c_int = 0x000000;
36 pub const SIG_UNBLOCK: ::c_int = 0x01;
50 pub const SA_ONSTACK: ::c_int = 0x08000000;
54 @@ -255,7 +255,6 @@ pub const MAP_STACK: ::c_int = 0x020000;
64 @@ -313,7 +313,6 @@ pub const MAP_SYNC: ::c_int = 0x080000;
|
| /openbmc/linux/arch/arm/boot/dts/broadcom/ |
| H A D | bcm47094-linksys-panamera.dts | 19 memory@0 {
21 reg = <0x00000000 0x08000000>,
22 <0x88000000 0x08000000>;
27 reg = <0x1c080000 0x100000>;
83 gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
136 reg = <0x200>;
138 #size-cells = <0>;
140 switch@0 {
143 #size-cells = <0>;
146 reg = <0>;
[all …]
|
| /openbmc/linux/Documentation/hwmon/ |
| H A D | w83791d.rst | 10 Addresses scanned: I2C 0x2c - 0x2f
40 (default 0)
49 (default 0)
51 Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
56 a certain chip. Example usage is `force_subclients=0,0x2f,0x4a,0x4b`
57 to force the subclients of chip 0x2f on bus 0 to i2c addresses
58 0x4a and 0x4b.
90 set for each fan separately. Valid values range from 0 (stop) to 255 (full).
157 in0 (VCORE) 0x000001 0x000001
158 in1 (VINR0) 0x000002 0x002000 <== mismatch
[all …]
|
| /openbmc/qemu/linux-user/generic/ |
| H A D | target_mman.h | 5 #define TARGET_MAP_SHARED 0x01
6 #define TARGET_MAP_PRIVATE 0x02
7 #define TARGET_MAP_SHARED_VALIDATE 0x03
9 /* 0x0100 - 0x4000 flags are defined in asm-generic/mman.h */
11 #define TARGET_MAP_GROWSDOWN 0x0100
14 #define TARGET_MAP_DENYWRITE 0x0800
17 #define TARGET_MAP_EXECUTABLE 0x1000
20 #define TARGET_MAP_LOCKED 0x2000
23 #define TARGET_MAP_NORESERVE 0x4000
28 #define TARGET_PROT_SEM 0x08
[all …]
|
| /openbmc/linux/drivers/gpu/drm/nouveau/nvkm/subdev/bus/ |
| H A D | g94.c | 35 nvkm_mask(device, 0x001098, 0x00000008, 0x00000000); in g94_bus_hwsq_exec()
36 nvkm_wr32(device, 0x001304, 0x00000000); in g94_bus_hwsq_exec()
37 nvkm_wr32(device, 0x001318, 0x00000000); in g94_bus_hwsq_exec()
38 for (i = 0; i < size; i++) in g94_bus_hwsq_exec()
39 nvkm_wr32(device, 0x080000 + (i * 4), data[i]); in g94_bus_hwsq_exec()
40 nvkm_mask(device, 0x001098, 0x00000018, 0x00000018); in g94_bus_hwsq_exec()
41 nvkm_wr32(device, 0x00130c, 0x00000001); in g94_bus_hwsq_exec()
44 if (!(nvkm_rd32(device, 0x001308) & 0x00000100)) in g94_bus_hwsq_exec()
46 ) < 0) in g94_bus_hwsq_exec()
49 return 0; in g94_bus_hwsq_exec()
|
| /openbmc/u-boot/include/ |
| H A D | fsl_pmic.h | 21 REG_INT_STATUS0 = 0,
101 /* Power Control 0 */
109 #define SWx_VOLT_MASK_MC34708 0x3F
110 #define SWx_1_110V_MC34708 0x24
111 #define SWx_1_250V_MC34708 0x30
112 #define SWx_1_300V_MC34708 0x34
113 #define TIMER_MASK_MC34708 0x300
114 #define TIMER_4S_MC34708 0x100
118 #define SWBST_AUTO 0x8
122 #define MC34708_SW1AMODE_MASK 0x00000f
[all …]
|
| /openbmc/linux/arch/powerpc/include/asm/nohash/ |
| H A D | pte-e500.h | 13 #define _PAGE_PRESENT 0x000001 /* software: pte contains a translation */
14 #define _PAGE_SW1 0x000002
15 #define _PAGE_BAP_SR 0x000004
16 #define _PAGE_BAP_UR 0x000008
17 #define _PAGE_BAP_SW 0x000010
18 #define _PAGE_BAP_UW 0x000020
19 #define _PAGE_BAP_SX 0x000040
20 #define _PAGE_BAP_UX 0x000080
21 #define _PAGE_PSIZE_MSK 0x000f00
22 #define _PAGE_PSIZE_4K 0x000200
[all …]
|
| /openbmc/u-boot/include/configs/ |
| H A D | at91sam9n12ek.h | 36 #define CONFIG_SYS_SDRAM_BASE 0x20000000
37 #define CONFIG_SYS_SDRAM_SIZE 0x08000000
45 (0x00300000 + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
52 #define CONFIG_SYS_NAND_BASE 0x40000000
60 "console=console=ttyS0,115200\0" \
61 "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \
62 "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
63 "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
67 #define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */
69 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
[all …]
|
| H A D | am3517_evm.h | 73 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
74 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x2a0000
77 * MLO(SPL) 4 * NAND_BLOCK_SIZE = 512 KiB @ 0x000000
78 * U-Boot 15 * NAND_BLOCK_SIZE = 1920 KiB @ 0x080000
79 * U-Boot environment 2 * NAND_BLOCK_SIZE = 256 KiB @ 0x260000
80 * Kernel 64 * NAND_BLOCK_SIZE = 8 MiB @ 0x2A0000
81 * DTB 4 * NAND_BLOCK_SIZE = 512 KiB @ 0xAA0000
82 * RootFS Remaining Flash Space @ 0xB20000
91 "loadaddr=0x82000000\0" \
92 "console=ttyS2,115200n8\0" \
[all …]
|
| /openbmc/linux/tools/include/uapi/asm-generic/ |
| H A D | mman-common.h | 10 #define PROT_READ 0x1 /* page can be read */
11 #define PROT_WRITE 0x2 /* page can be written */
12 #define PROT_EXEC 0x4 /* page can be executed */
13 #define PROT_SEM 0x8 /* page may be used for atomic ops */
14 /* 0x10 reserved for arch-specific use */
15 /* 0x20 reserved for arch-specific use */
16 #define PROT_NONE 0x0 /* page can not be accessed */
17 #define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
18 #define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
20 /* 0x01 - 0x03 are defined in linux/mman.h */
[all …]
|
| /openbmc/qemu/linux-headers/asm-generic/ |
| H A D | mman-common.h | 10 #define PROT_READ 0x1 /* page can be read */
11 #define PROT_WRITE 0x2 /* page can be written */
12 #define PROT_EXEC 0x4 /* page can be executed */
13 #define PROT_SEM 0x8 /* page may be used for atomic ops */
14 /* 0x10 reserved for arch-specific use */
15 /* 0x20 reserved for arch-specific use */
16 #define PROT_NONE 0x0 /* page can not be accessed */
17 #define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
18 #define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
20 /* 0x01 - 0x03 are defined in linux/mman.h */
[all …]
|
| /openbmc/linux/include/uapi/asm-generic/ |
| H A D | mman-common.h | 10 #define PROT_READ 0x1 /* page can be read */
11 #define PROT_WRITE 0x2 /* page can be written */
12 #define PROT_EXEC 0x4 /* page can be executed */
13 #define PROT_SEM 0x8 /* page may be used for atomic ops */
14 /* 0x10 reserved for arch-specific use */
15 /* 0x20 reserved for arch-specific use */
16 #define PROT_NONE 0x0 /* page can not be accessed */
17 #define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
18 #define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
20 /* 0x01 - 0x03 are defined in linux/mman.h */
[all …]
|
| /openbmc/linux/include/linux/ |
| H A D | mount.h | 25 #define MNT_NOSUID 0x01
26 #define MNT_NODEV 0x02
27 #define MNT_NOEXEC 0x04
28 #define MNT_NOATIME 0x08
29 #define MNT_NODIRATIME 0x10
30 #define MNT_RELATIME 0x20
31 #define MNT_READONLY 0x40 /* does the user want this to be r/o? */
32 #define MNT_NOSYMFOLLOW 0x80
34 #define MNT_SHRINKABLE 0x100
35 #define MNT_WRITE_HOLD 0x200
[all …]
|
| H A D | namei.h | 21 #define LOOKUP_FOLLOW 0x0001 /* follow links at the end */
22 #define LOOKUP_DIRECTORY 0x0002 /* require a directory */
23 #define LOOKUP_AUTOMOUNT 0x0004 /* force terminal automount */
24 #define LOOKUP_EMPTY 0x4000 /* accept empty path [user_... only] */
25 #define LOOKUP_DOWN 0x8000 /* follow mounts in the starting point */
26 #define LOOKUP_MOUNTPOINT 0x0080 /* follow mounts in the end */
28 #define LOOKUP_REVAL 0x0020 /* tell ->d_revalidate() to trust no cache */
29 #define LOOKUP_RCU 0x0040 /* RCU pathwalk mode; semi-internal */
32 #define LOOKUP_OPEN 0x0100 /* ... in open */
33 #define LOOKUP_CREATE 0x0200 /* ... in object creation */
[all …]
|
| /openbmc/u-boot/arch/arm/include/asm/arch-ep93xx/ |
| H A D | ep93xx.h | 24 #define EP93XX_AHB_BASE 0x80000000
25 #define EP93XX_APB_BASE 0x80800000
28 * 0x80000000 - 0x8000FFFF: DMA
30 #define DMA_OFFSET 0x000000
73 * 0x80010000 - 0x8001FFFF: Ethernet MAC
75 #define MAC_OFFSET 0x010000
155 #define SELFCTL_RESET (1 << 0)
186 #define BMCTL_RXEN (1 << 0)
191 #define BMSTS_QID_MASK 0x07
192 #define BMSTS_QID_RXDATA 0x00
[all …]
|
| /openbmc/linux/sound/drivers/vx/ |
| H A D | vx_cmd.c | 19 [CMD_VERSION] = { 0x010000, 2, RMH_SSIZE_FIXED, 1 },
20 [CMD_SUPPORTED] = { 0x020000, 1, RMH_SSIZE_FIXED, 2 },
21 [CMD_TEST_IT] = { 0x040000, 1, RMH_SSIZE_FIXED, 1 },
22 [CMD_SEND_IRQA] = { 0x070001, 1, RMH_SSIZE_FIXED, 0 },
23 [CMD_IBL] = { 0x080000, 1, RMH_SSIZE_FIXED, 4 },
24 [CMD_ASYNC] = { 0x0A0000, 1, RMH_SSIZE_ARG, 0 },
25 [CMD_RES_PIPE] = { 0x400000, 1, RMH_SSIZE_FIXED, 0 },
26 [CMD_FREE_PIPE] = { 0x410000, 1, RMH_SSIZE_FIXED, 0 },
27 [CMD_CONF_PIPE] = { 0x42A101, 2, RMH_SSIZE_FIXED, 0 },
28 [CMD_ABORT_CONF_PIPE] = { 0x42A100, 2, RMH_SSIZE_FIXED, 0 },
[all …]
|
| /openbmc/linux/drivers/media/platform/via/ |
| H A D | via-camera.h | 5 #define VCR_INTCTRL 0x300 /* Capture interrupt control */
6 #define VCR_IC_EAV 0x0001 /* End of active video status */
7 #define VCR_IC_EVBI 0x0002 /* End of VBI status */
8 #define VCR_IC_FBOTFLD 0x0004 /* "flipping" Bottom field is active */
9 #define VCR_IC_ACTBUF 0x0018 /* Active video buffer */
10 #define VCR_IC_VSYNC 0x0020 /* 0 = VB, 1 = active video */
11 #define VCR_IC_BOTFLD 0x0040 /* Bottom field is active */
12 #define VCR_IC_FFULL 0x0080 /* FIFO full */
13 #define VCR_IC_INTEN 0x0100 /* End of active video int. enable */
14 #define VCR_IC_VBIINT 0x0200 /* End of VBI int enable */
[all …]
|