1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Microchip PCI1XXXX I2C adapter driver for PCIe Switch
4  * which has I2C controller in one of its downstream functions
5  *
6  * Copyright (C) 2021 - 2022 Microchip Technology Inc.
7  *
8  * Authors: Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>
9  *          Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>
10  */
11 
12 #include <linux/bits.h>
13 #include <linux/delay.h>
14 #include <linux/i2c.h>
15 #include <linux/i2c-smbus.h>
16 #include <linux/interrupt.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/pci.h>
20 #include <linux/types.h>
21 
22 #define SMBUS_MAST_CORE_ADDR_BASE		0x00000
23 #define SMBUS_MAST_SYS_REG_ADDR_BASE		0x01000
24 
25 /* SMB register space. */
26 #define SMB_CORE_CTRL_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x00)
27 
28 #define SMB_CORE_CTRL_ESO		BIT(6)
29 #define SMB_CORE_CTRL_FW_ACK		BIT(4)
30 #define SMB_CORE_CTRL_ACK		BIT(0)
31 
32 #define SMB_CORE_CMD_REG_OFF3	(SMBUS_MAST_CORE_ADDR_BASE + 0x0F)
33 #define SMB_CORE_CMD_REG_OFF2	(SMBUS_MAST_CORE_ADDR_BASE + 0x0E)
34 #define SMB_CORE_CMD_REG_OFF1	(SMBUS_MAST_CORE_ADDR_BASE + 0x0D)
35 
36 #define SMB_CORE_CMD_READM		BIT(4)
37 #define SMB_CORE_CMD_STOP		BIT(2)
38 #define SMB_CORE_CMD_START		BIT(0)
39 
40 #define SMB_CORE_CMD_REG_OFF0	(SMBUS_MAST_CORE_ADDR_BASE + 0x0C)
41 
42 #define SMB_CORE_CMD_M_PROCEED		BIT(1)
43 #define SMB_CORE_CMD_M_RUN		BIT(0)
44 
45 #define SMB_CORE_SR_HOLD_TIME_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x18)
46 
47 /*
48  * SR_HOLD_TIME_XK_TICKS field will indicate the number of ticks of the
49  * baud clock required to program 'Hold Time' at X KHz.
50  */
51 #define SR_HOLD_TIME_100K_TICKS		150
52 #define SR_HOLD_TIME_400K_TICKS		20
53 #define SR_HOLD_TIME_1000K_TICKS	12
54 
55 #define SMB_CORE_COMPLETION_REG_OFF3	(SMBUS_MAST_CORE_ADDR_BASE + 0x23)
56 
57 #define COMPLETION_MDONE		BIT(6)
58 #define COMPLETION_IDLE			BIT(5)
59 #define COMPLETION_MNAKX		BIT(0)
60 
61 #define SMB_CORE_IDLE_SCALING_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x24)
62 
63 /*
64  * FAIR_BUS_IDLE_MIN_XK_TICKS field will indicate the number of ticks of
65  * the baud clock required to program 'fair idle delay' at X KHz. Fair idle
66  * delay establishes the MCTP T(IDLE_DELAY) period.
67  */
68 #define FAIR_BUS_IDLE_MIN_100K_TICKS		992
69 #define FAIR_BUS_IDLE_MIN_400K_TICKS		500
70 #define FAIR_BUS_IDLE_MIN_1000K_TICKS		500
71 
72 /*
73  * FAIR_IDLE_DELAY_XK_TICKS field will indicate the number of ticks of the
74  * baud clock required to satisfy the fairness protocol at X KHz.
75  */
76 #define FAIR_IDLE_DELAY_100K_TICKS	963
77 #define FAIR_IDLE_DELAY_400K_TICKS	156
78 #define FAIR_IDLE_DELAY_1000K_TICKS	156
79 
80 #define SMB_IDLE_SCALING_100K		\
81 	((FAIR_IDLE_DELAY_100K_TICKS << 16) | FAIR_BUS_IDLE_MIN_100K_TICKS)
82 #define SMB_IDLE_SCALING_400K		\
83 	((FAIR_IDLE_DELAY_400K_TICKS << 16) | FAIR_BUS_IDLE_MIN_400K_TICKS)
84 #define SMB_IDLE_SCALING_1000K	\
85 	((FAIR_IDLE_DELAY_1000K_TICKS << 16) | FAIR_BUS_IDLE_MIN_1000K_TICKS)
86 
87 #define SMB_CORE_CONFIG_REG3		(SMBUS_MAST_CORE_ADDR_BASE + 0x2B)
88 
89 #define SMB_CONFIG3_ENMI		BIT(6)
90 #define SMB_CONFIG3_ENIDI		BIT(5)
91 
92 #define SMB_CORE_CONFIG_REG2		(SMBUS_MAST_CORE_ADDR_BASE + 0x2A)
93 #define SMB_CORE_CONFIG_REG1		(SMBUS_MAST_CORE_ADDR_BASE + 0x29)
94 
95 #define SMB_CONFIG1_ASR			BIT(7)
96 #define SMB_CONFIG1_ENAB		BIT(2)
97 #define SMB_CONFIG1_RESET		BIT(1)
98 #define SMB_CONFIG1_FEN			BIT(0)
99 
100 #define SMB_CORE_BUS_CLK_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x2C)
101 
102 /*
103  * BUS_CLK_XK_LOW_PERIOD_TICKS field defines the number of I2C Baud Clock
104  * periods that make up the low phase of the I2C/SMBus bus clock at X KHz.
105  */
106 #define BUS_CLK_100K_LOW_PERIOD_TICKS		156
107 #define BUS_CLK_400K_LOW_PERIOD_TICKS		41
108 #define BUS_CLK_1000K_LOW_PERIOD_TICKS		15
109 
110 /*
111  * BUS_CLK_XK_HIGH_PERIOD_TICKS field defines the number of I2C Baud Clock
112  * periods that make up the high phase of the I2C/SMBus bus clock at X KHz.
113  */
114 #define BUS_CLK_100K_HIGH_PERIOD_TICKS	154
115 #define BUS_CLK_400K_HIGH_PERIOD_TICKS	35
116 #define BUS_CLK_1000K_HIGH_PERIOD_TICKS	14
117 
118 #define BUS_CLK_100K			\
119 	((BUS_CLK_100K_HIGH_PERIOD_TICKS << 8) | BUS_CLK_100K_LOW_PERIOD_TICKS)
120 #define BUS_CLK_400K			\
121 	((BUS_CLK_400K_HIGH_PERIOD_TICKS << 8) | BUS_CLK_400K_LOW_PERIOD_TICKS)
122 #define BUS_CLK_1000K			\
123 	((BUS_CLK_1000K_HIGH_PERIOD_TICKS << 8) | BUS_CLK_1000K_LOW_PERIOD_TICKS)
124 
125 #define SMB_CORE_CLK_SYNC_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x3C)
126 
127 /*
128  * CLK_SYNC_XK defines the number of clock cycles to sync up to the external
129  * clock before comparing the internal and external clocks for clock stretching
130  * at X KHz.
131  */
132 #define CLK_SYNC_100K			4
133 #define CLK_SYNC_400K			4
134 #define CLK_SYNC_1000K			4
135 
136 #define SMB_CORE_DATA_TIMING_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x40)
137 
138 /*
139  *
140  * FIRST_START_HOLD_XK_TICKS will indicate the number of ticks of the baud
141  * clock required to program 'FIRST_START_HOLD' timer at X KHz. This timer
142  * determines the SCLK hold time following SDAT driven low during the first
143  * START bit in a transfer.
144  */
145 #define FIRST_START_HOLD_100K_TICKS	23
146 #define FIRST_START_HOLD_400K_TICKS	8
147 #define FIRST_START_HOLD_1000K_TICKS	12
148 
149 /*
150  * STOP_SETUP_XK_TICKS will indicate the number of ticks of the baud clock
151  * required to program 'STOP_SETUP' timer at X KHz. This timer determines the
152  * SDAT setup time from the rising edge of SCLK for a STOP condition.
153  */
154 #define STOP_SETUP_100K_TICKS		150
155 #define STOP_SETUP_400K_TICKS		20
156 #define STOP_SETUP_1000K_TICKS		12
157 
158 /*
159  * RESTART_SETUP_XK_TICKS will indicate the number of ticks of the baud clock
160  * required to program 'RESTART_SETUP' timer at X KHz. This timer determines the
161  * SDAT setup time from the rising edge of SCLK for a repeated START condition.
162  */
163 #define RESTART_SETUP_100K_TICKS	156
164 #define RESTART_SETUP_400K_TICKS	20
165 #define RESTART_SETUP_1000K_TICKS	12
166 
167 /*
168  * DATA_HOLD_XK_TICKS will indicate the number of ticks of the baud clock
169  * required to program 'DATA_HOLD' timer at X KHz. This timer determines the
170  * SDAT hold time following SCLK driven low.
171  */
172 #define DATA_HOLD_100K_TICKS		12
173 #define DATA_HOLD_400K_TICKS		2
174 #define DATA_HOLD_1000K_TICKS		2
175 
176 #define DATA_TIMING_100K		\
177 	((FIRST_START_HOLD_100K_TICKS << 24) | (STOP_SETUP_100K_TICKS << 16) | \
178 	(RESTART_SETUP_100K_TICKS << 8) | DATA_HOLD_100K_TICKS)
179 #define DATA_TIMING_400K		\
180 	((FIRST_START_HOLD_400K_TICKS << 24) | (STOP_SETUP_400K_TICKS << 16) | \
181 	(RESTART_SETUP_400K_TICKS << 8) | DATA_HOLD_400K_TICKS)
182 #define DATA_TIMING_1000K		\
183 	((FIRST_START_HOLD_1000K_TICKS << 24) | (STOP_SETUP_1000K_TICKS << 16) | \
184 	(RESTART_SETUP_1000K_TICKS << 8) | DATA_HOLD_1000K_TICKS)
185 
186 #define SMB_CORE_TO_SCALING_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x44)
187 
188 /*
189  * BUS_IDLE_MIN_XK_TICKS defines Bus Idle Minimum Time.
190  * Bus Idle Minimum time = BUS_IDLE_MIN[7:0] x Baud_Clock_Period x
191  * (BUS_IDLE_MIN_XK_TICKS[7] ? 4,1)
192  */
193 #define BUS_IDLE_MIN_100K_TICKS		36UL
194 #define BUS_IDLE_MIN_400K_TICKS		10UL
195 #define BUS_IDLE_MIN_1000K_TICKS	4UL
196 
197 /*
198  * CTRL_CUM_TIME_OUT_XK_TICKS defines SMBus Controller Cumulative Time-Out.
199  * SMBus Controller Cumulative Time-Out duration =
200  * CTRL_CUM_TIME_OUT_XK_TICKS[7:0] x Baud_Clock_Period x 2048
201  */
202 #define CTRL_CUM_TIME_OUT_100K_TICKS		76
203 #define CTRL_CUM_TIME_OUT_400K_TICKS		76
204 #define CTRL_CUM_TIME_OUT_1000K_TICKS		76
205 
206 /*
207  * TARGET_CUM_TIME_OUT_XK_TICKS defines SMBus Target Cumulative Time-Out duration.
208  * SMBus Target Cumulative Time-Out duration = TARGET_CUM_TIME_OUT_XK_TICKS[7:0] x
209  * Baud_Clock_Period x 4096
210  */
211 #define TARGET_CUM_TIME_OUT_100K_TICKS	95
212 #define TARGET_CUM_TIME_OUT_400K_TICKS	95
213 #define TARGET_CUM_TIME_OUT_1000K_TICKS	95
214 
215 /*
216  * CLOCK_HIGH_TIME_OUT_XK defines Clock High time out period.
217  * Clock High time out period = CLOCK_HIGH_TIME_OUT_XK[7:0] x Baud_Clock_Period x 8
218  */
219 #define CLOCK_HIGH_TIME_OUT_100K_TICKS	97
220 #define CLOCK_HIGH_TIME_OUT_400K_TICKS	97
221 #define CLOCK_HIGH_TIME_OUT_1000K_TICKS	97
222 
223 #define TO_SCALING_100K		\
224 	((BUS_IDLE_MIN_100K_TICKS << 24) | (CTRL_CUM_TIME_OUT_100K_TICKS << 16) | \
225 	(TARGET_CUM_TIME_OUT_100K_TICKS << 8) | CLOCK_HIGH_TIME_OUT_100K_TICKS)
226 #define TO_SCALING_400K		\
227 	((BUS_IDLE_MIN_400K_TICKS << 24) | (CTRL_CUM_TIME_OUT_400K_TICKS << 16) | \
228 	(TARGET_CUM_TIME_OUT_400K_TICKS << 8) | CLOCK_HIGH_TIME_OUT_400K_TICKS)
229 #define TO_SCALING_1000K		\
230 	((BUS_IDLE_MIN_1000K_TICKS << 24) | (CTRL_CUM_TIME_OUT_1000K_TICKS << 16) | \
231 	(TARGET_CUM_TIME_OUT_1000K_TICKS << 8) | CLOCK_HIGH_TIME_OUT_1000K_TICKS)
232 
233 #define I2C_SCL_PAD_CTRL_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x100)
234 #define I2C_SDA_PAD_CTRL_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x101)
235 
236 #define I2C_FOD_EN			BIT(4)
237 #define I2C_PULL_UP_EN			BIT(3)
238 #define I2C_PULL_DOWN_EN		BIT(2)
239 #define I2C_INPUT_EN			BIT(1)
240 #define I2C_OUTPUT_EN			BIT(0)
241 
242 #define SMBUS_CONTROL_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x200)
243 
244 #define CTL_RESET_COUNTERS		BIT(3)
245 #define CTL_TRANSFER_DIR		BIT(2)
246 #define CTL_HOST_FIFO_ENTRY		BIT(1)
247 #define CTL_RUN				BIT(0)
248 
249 #define I2C_DIRN_WRITE			0
250 #define I2C_DIRN_READ			1
251 
252 #define SMBUS_STATUS_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x204)
253 
254 #define STA_DMA_TERM			BIT(7)
255 #define STA_DMA_REQ			BIT(6)
256 #define STA_THRESHOLD			BIT(2)
257 #define STA_BUF_FULL			BIT(1)
258 #define STA_BUF_EMPTY			BIT(0)
259 
260 #define SMBUS_INTR_STAT_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x208)
261 
262 #define INTR_STAT_DMA_TERM		BIT(7)
263 #define INTR_STAT_THRESHOLD		BIT(2)
264 #define INTR_STAT_BUF_FULL		BIT(1)
265 #define INTR_STAT_BUF_EMPTY		BIT(0)
266 
267 #define SMBUS_INTR_MSK_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x20C)
268 
269 #define INTR_MSK_DMA_TERM		BIT(7)
270 #define INTR_MSK_THRESHOLD		BIT(2)
271 #define INTR_MSK_BUF_FULL		BIT(1)
272 #define INTR_MSK_BUF_EMPTY		BIT(0)
273 
274 #define ALL_NW_LAYER_INTERRUPTS  \
275 	(INTR_MSK_DMA_TERM | INTR_MSK_THRESHOLD | INTR_MSK_BUF_FULL | \
276 	 INTR_MSK_BUF_EMPTY)
277 
278 #define SMBUS_MCU_COUNTER_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x214)
279 
280 #define SMBALERT_MST_PAD_CTRL_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x230)
281 
282 #define SMBALERT_MST_PU			BIT(0)
283 
284 #define SMBUS_GEN_INT_STAT_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x23C)
285 
286 #define SMBUS_GEN_INT_MASK_REG_OFF	(SMBUS_MAST_CORE_ADDR_BASE + 0x240)
287 
288 #define SMBALERT_INTR_MASK		BIT(10)
289 #define I2C_BUF_MSTR_INTR_MASK		BIT(9)
290 #define I2C_INTR_MASK			BIT(8)
291 #define SMBALERT_WAKE_INTR_MASK		BIT(2)
292 #define I2C_BUF_MSTR_WAKE_INTR_MASK	BIT(1)
293 #define I2C_WAKE_INTR_MASK		BIT(0)
294 
295 #define ALL_HIGH_LAYER_INTR     \
296 	(SMBALERT_INTR_MASK | I2C_BUF_MSTR_INTR_MASK | I2C_INTR_MASK | \
297 	SMBALERT_WAKE_INTR_MASK | I2C_BUF_MSTR_WAKE_INTR_MASK | \
298 	I2C_WAKE_INTR_MASK)
299 
300 #define SMBUS_RESET_REG		(SMBUS_MAST_CORE_ADDR_BASE + 0x248)
301 
302 #define PERI_SMBUS_D3_RESET_DIS		BIT(16)
303 
304 #define SMBUS_MST_BUF		(SMBUS_MAST_CORE_ADDR_BASE + 0x280)
305 
306 #define SMBUS_BUF_MAX_SIZE		0x80
307 
308 #define I2C_FLAGS_DIRECT_MODE		BIT(7)
309 #define I2C_FLAGS_POLLING_MODE		BIT(6)
310 #define I2C_FLAGS_STOP			BIT(5)
311 #define I2C_FLAGS_SMB_BLK_READ		BIT(4)
312 
313 #define PCI1XXXX_I2C_TIMEOUT_MS		1000
314 
315 /* General Purpose Register. */
316 #define SMB_GPR_REG		(SMBUS_MAST_CORE_ADDR_BASE + 0x1000 + 0x0c00 + \
317 				0x00)
318 
319 /* Lock Register. */
320 #define SMB_GPR_LOCK_REG	(SMBUS_MAST_CORE_ADDR_BASE + 0x1000 + 0x0000 + \
321 				0x00A0)
322 
323 #define SMBUS_PERI_LOCK		BIT(3)
324 
325 struct pci1xxxx_i2c {
326 	struct completion i2c_xfer_done;
327 	bool i2c_xfer_in_progress;
328 	struct i2c_adapter adap;
329 	void __iomem *i2c_base;
330 	u32 freq;
331 	u32 flags;
332 };
333 
set_sys_lock(struct pci1xxxx_i2c * i2c)334 static int set_sys_lock(struct pci1xxxx_i2c *i2c)
335 {
336 	void __iomem *p = i2c->i2c_base + SMB_GPR_LOCK_REG;
337 	u8 data;
338 
339 	writel(SMBUS_PERI_LOCK, p);
340 	data = readl(p);
341 	if (data != SMBUS_PERI_LOCK)
342 		return -EPERM;
343 
344 	return 0;
345 }
346 
release_sys_lock(struct pci1xxxx_i2c * i2c)347 static int release_sys_lock(struct pci1xxxx_i2c *i2c)
348 {
349 	void __iomem *p = i2c->i2c_base + SMB_GPR_LOCK_REG;
350 	u8 data;
351 
352 	data = readl(p);
353 	if (data != SMBUS_PERI_LOCK)
354 		return 0;
355 
356 	writel(0, p);
357 	data = readl(p);
358 	if (data & SMBUS_PERI_LOCK)
359 		return -EPERM;
360 
361 	return 0;
362 }
363 
pci1xxxx_ack_high_level_intr(struct pci1xxxx_i2c * i2c,u16 intr_msk)364 static void pci1xxxx_ack_high_level_intr(struct pci1xxxx_i2c *i2c, u16 intr_msk)
365 {
366 	writew(intr_msk, i2c->i2c_base + SMBUS_GEN_INT_STAT_REG_OFF);
367 }
368 
pci1xxxx_i2c_configure_smbalert_pin(struct pci1xxxx_i2c * i2c,bool enable)369 static void pci1xxxx_i2c_configure_smbalert_pin(struct pci1xxxx_i2c *i2c,
370 						bool enable)
371 {
372 	void __iomem *p = i2c->i2c_base + SMBALERT_MST_PAD_CTRL_REG_OFF;
373 	u8 regval;
374 
375 	regval = readb(p);
376 
377 	if (enable)
378 		regval |= SMBALERT_MST_PU;
379 	else
380 		regval &= ~SMBALERT_MST_PU;
381 
382 	writeb(regval, p);
383 }
384 
pci1xxxx_i2c_send_start_stop(struct pci1xxxx_i2c * i2c,bool start)385 static void pci1xxxx_i2c_send_start_stop(struct pci1xxxx_i2c *i2c, bool start)
386 {
387 	void __iomem *p = i2c->i2c_base + SMB_CORE_CMD_REG_OFF1;
388 	u8 regval;
389 
390 	regval = readb(p);
391 
392 	if (start)
393 		regval |= SMB_CORE_CMD_START;
394 	else
395 		regval |= SMB_CORE_CMD_STOP;
396 
397 	writeb(regval, p);
398 }
399 
400 /*
401  * When accessing the core control reg, we should not do a read modified write
402  * as they are write '1' to clear bits. Instead we need to write with the
403  * specific bits that needs to be set.
404  */
pci1xxxx_i2c_set_clear_FW_ACK(struct pci1xxxx_i2c * i2c,bool set)405 static void pci1xxxx_i2c_set_clear_FW_ACK(struct pci1xxxx_i2c *i2c, bool set)
406 {
407 	u8 regval;
408 
409 	if (set)
410 		regval = SMB_CORE_CTRL_FW_ACK | SMB_CORE_CTRL_ESO | SMB_CORE_CTRL_ACK;
411 	else
412 		regval = SMB_CORE_CTRL_ESO | SMB_CORE_CTRL_ACK;
413 
414 	writeb(regval, i2c->i2c_base + SMB_CORE_CTRL_REG_OFF);
415 }
416 
pci1xxxx_i2c_buffer_write(struct pci1xxxx_i2c * i2c,u8 slaveaddr,u8 transferlen,unsigned char * buf)417 static void pci1xxxx_i2c_buffer_write(struct pci1xxxx_i2c *i2c, u8 slaveaddr,
418 				      u8 transferlen, unsigned char *buf)
419 {
420 	void __iomem *p = i2c->i2c_base + SMBUS_MST_BUF;
421 
422 	if (slaveaddr)
423 		writeb(slaveaddr, p++);
424 
425 	if (buf)
426 		memcpy_toio(p, buf, transferlen);
427 }
428 
429 /*
430  * When accessing the core control reg, we should not do a read modified write
431  * as there are write '1' to clear bits. Instead we need to write with the
432  * specific bits that needs to be set.
433  */
pci1xxxx_i2c_enable_ESO(struct pci1xxxx_i2c * i2c)434 static void pci1xxxx_i2c_enable_ESO(struct pci1xxxx_i2c *i2c)
435 {
436 	writeb(SMB_CORE_CTRL_ESO, i2c->i2c_base + SMB_CORE_CTRL_REG_OFF);
437 }
438 
pci1xxxx_i2c_reset_counters(struct pci1xxxx_i2c * i2c)439 static void pci1xxxx_i2c_reset_counters(struct pci1xxxx_i2c *i2c)
440 {
441 	void __iomem *p = i2c->i2c_base + SMBUS_CONTROL_REG_OFF;
442 	u8 regval;
443 
444 	regval = readb(p);
445 	regval |= CTL_RESET_COUNTERS;
446 	writeb(regval, p);
447 }
448 
pci1xxxx_i2c_set_transfer_dir(struct pci1xxxx_i2c * i2c,u8 direction)449 static void pci1xxxx_i2c_set_transfer_dir(struct pci1xxxx_i2c *i2c, u8 direction)
450 {
451 	void __iomem *p = i2c->i2c_base + SMBUS_CONTROL_REG_OFF;
452 	u8 regval;
453 
454 	regval = readb(p);
455 	if (direction == I2C_DIRN_WRITE)
456 		regval &= ~CTL_TRANSFER_DIR;
457 	else
458 		regval |= CTL_TRANSFER_DIR;
459 
460 	writeb(regval, p);
461 }
462 
pci1xxxx_i2c_set_mcu_count(struct pci1xxxx_i2c * i2c,u8 count)463 static void pci1xxxx_i2c_set_mcu_count(struct pci1xxxx_i2c *i2c, u8 count)
464 {
465 	writeb(count, i2c->i2c_base + SMBUS_MCU_COUNTER_REG_OFF);
466 }
467 
pci1xxxx_i2c_set_read_count(struct pci1xxxx_i2c * i2c,u8 readcount)468 static void pci1xxxx_i2c_set_read_count(struct pci1xxxx_i2c *i2c, u8 readcount)
469 {
470 	writeb(readcount, i2c->i2c_base + SMB_CORE_CMD_REG_OFF3);
471 }
472 
pci1xxxx_i2c_set_write_count(struct pci1xxxx_i2c * i2c,u8 writecount)473 static void pci1xxxx_i2c_set_write_count(struct pci1xxxx_i2c *i2c, u8 writecount)
474 {
475 	writeb(writecount, i2c->i2c_base + SMB_CORE_CMD_REG_OFF2);
476 }
477 
pci1xxxx_i2c_set_DMA_run(struct pci1xxxx_i2c * i2c)478 static void pci1xxxx_i2c_set_DMA_run(struct pci1xxxx_i2c *i2c)
479 {
480 	void __iomem *p = i2c->i2c_base + SMBUS_CONTROL_REG_OFF;
481 	u8 regval;
482 
483 	regval = readb(p);
484 	regval |= CTL_RUN;
485 	writeb(regval, p);
486 }
487 
pci1xxxx_i2c_set_mrun_proceed(struct pci1xxxx_i2c * i2c)488 static void pci1xxxx_i2c_set_mrun_proceed(struct pci1xxxx_i2c *i2c)
489 {
490 	void __iomem *p = i2c->i2c_base + SMB_CORE_CMD_REG_OFF0;
491 	u8 regval;
492 
493 	regval = readb(p);
494 	regval |= SMB_CORE_CMD_M_RUN;
495 	regval |= SMB_CORE_CMD_M_PROCEED;
496 	writeb(regval, p);
497 }
498 
pci1xxxx_i2c_start_DMA(struct pci1xxxx_i2c * i2c)499 static void pci1xxxx_i2c_start_DMA(struct pci1xxxx_i2c *i2c)
500 {
501 	pci1xxxx_i2c_set_DMA_run(i2c);
502 	pci1xxxx_i2c_set_mrun_proceed(i2c);
503 }
504 
pci1xxxx_i2c_config_asr(struct pci1xxxx_i2c * i2c,bool enable)505 static void pci1xxxx_i2c_config_asr(struct pci1xxxx_i2c *i2c, bool enable)
506 {
507 	void __iomem *p = i2c->i2c_base + SMB_CORE_CONFIG_REG1;
508 	u8 regval;
509 
510 	regval = readb(p);
511 	if (enable)
512 		regval |= SMB_CONFIG1_ASR;
513 	else
514 		regval &= ~SMB_CONFIG1_ASR;
515 	writeb(regval, p);
516 }
517 
pci1xxxx_i2c_isr(int irq,void * dev)518 static irqreturn_t pci1xxxx_i2c_isr(int irq, void *dev)
519 {
520 	struct pci1xxxx_i2c *i2c = dev;
521 	void __iomem *p1 = i2c->i2c_base + SMBUS_GEN_INT_STAT_REG_OFF;
522 	void __iomem *p2 = i2c->i2c_base + SMBUS_INTR_STAT_REG_OFF;
523 	irqreturn_t intr_handled = IRQ_NONE;
524 	u16 reg1;
525 	u8 reg3;
526 
527 	/*
528 	 *  Read the SMBus interrupt status register to see if the
529 	 *  DMA_TERM interrupt has caused this callback.
530 	 */
531 	reg1 = readw(p1);
532 
533 	if (reg1 & I2C_BUF_MSTR_INTR_MASK) {
534 		reg3 = readb(p2);
535 		if (reg3 & INTR_STAT_DMA_TERM) {
536 			complete(&i2c->i2c_xfer_done);
537 			intr_handled = IRQ_HANDLED;
538 			writeb(INTR_STAT_DMA_TERM, p2);
539 		}
540 		pci1xxxx_ack_high_level_intr(i2c, I2C_BUF_MSTR_INTR_MASK);
541 	}
542 
543 	if (reg1 & SMBALERT_INTR_MASK) {
544 		intr_handled = IRQ_HANDLED;
545 		pci1xxxx_ack_high_level_intr(i2c, SMBALERT_INTR_MASK);
546 	}
547 
548 	return intr_handled;
549 }
550 
pci1xxxx_i2c_set_count(struct pci1xxxx_i2c * i2c,u8 mcucount,u8 writecount,u8 readcount)551 static void pci1xxxx_i2c_set_count(struct pci1xxxx_i2c *i2c, u8 mcucount,
552 				   u8 writecount, u8 readcount)
553 {
554 	pci1xxxx_i2c_set_mcu_count(i2c, mcucount);
555 	pci1xxxx_i2c_set_write_count(i2c, writecount);
556 	pci1xxxx_i2c_set_read_count(i2c, readcount);
557 }
558 
pci1xxxx_i2c_set_readm(struct pci1xxxx_i2c * i2c,bool enable)559 static void pci1xxxx_i2c_set_readm(struct pci1xxxx_i2c *i2c, bool enable)
560 {
561 	void __iomem *p = i2c->i2c_base + SMB_CORE_CMD_REG_OFF1;
562 	u8 regval;
563 
564 	regval = readb(p);
565 	if (enable)
566 		regval |= SMB_CORE_CMD_READM;
567 	else
568 		regval &= ~SMB_CORE_CMD_READM;
569 
570 	writeb(regval, p);
571 }
572 
pci1xxxx_ack_nw_layer_intr(struct pci1xxxx_i2c * i2c,u8 ack_intr_msk)573 static void pci1xxxx_ack_nw_layer_intr(struct pci1xxxx_i2c *i2c, u8 ack_intr_msk)
574 {
575 	writeb(ack_intr_msk, i2c->i2c_base + SMBUS_INTR_STAT_REG_OFF);
576 }
577 
pci1xxxx_config_nw_layer_intr(struct pci1xxxx_i2c * i2c,u8 intr_msk,bool enable)578 static void pci1xxxx_config_nw_layer_intr(struct pci1xxxx_i2c *i2c,
579 					  u8 intr_msk, bool enable)
580 {
581 	void __iomem *p = i2c->i2c_base + SMBUS_INTR_MSK_REG_OFF;
582 	u8 regval;
583 
584 	regval = readb(p);
585 	if (enable)
586 		regval &= ~intr_msk;
587 	else
588 		regval |= intr_msk;
589 
590 	writeb(regval, p);
591 }
592 
pci1xxxx_i2c_config_padctrl(struct pci1xxxx_i2c * i2c,bool enable)593 static void pci1xxxx_i2c_config_padctrl(struct pci1xxxx_i2c *i2c, bool enable)
594 {
595 	void __iomem *p1 = i2c->i2c_base + I2C_SCL_PAD_CTRL_REG_OFF;
596 	void __iomem *p2 = i2c->i2c_base + I2C_SDA_PAD_CTRL_REG_OFF;
597 	u8 regval;
598 
599 	regval = readb(p1);
600 	if (enable)
601 		regval |= I2C_INPUT_EN | I2C_OUTPUT_EN;
602 	else
603 		regval &= ~(I2C_INPUT_EN | I2C_OUTPUT_EN);
604 
605 	writeb(regval, p1);
606 
607 	regval = readb(p2);
608 	if (enable)
609 		regval |= I2C_INPUT_EN | I2C_OUTPUT_EN;
610 	else
611 		regval &= ~(I2C_INPUT_EN | I2C_OUTPUT_EN);
612 
613 	writeb(regval, p2);
614 }
615 
pci1xxxx_i2c_set_mode(struct pci1xxxx_i2c * i2c)616 static void pci1xxxx_i2c_set_mode(struct pci1xxxx_i2c *i2c)
617 {
618 	void __iomem *p = i2c->i2c_base + SMBUS_CONTROL_REG_OFF;
619 	u8 regval;
620 
621 	regval = readb(p);
622 	if (i2c->flags & I2C_FLAGS_DIRECT_MODE)
623 		regval &= ~CTL_HOST_FIFO_ENTRY;
624 	else
625 		regval |= CTL_HOST_FIFO_ENTRY;
626 
627 	writeb(regval, p);
628 }
629 
pci1xxxx_i2c_config_high_level_intr(struct pci1xxxx_i2c * i2c,u16 intr_msk,bool enable)630 static void pci1xxxx_i2c_config_high_level_intr(struct pci1xxxx_i2c *i2c,
631 						u16 intr_msk, bool enable)
632 {
633 	void __iomem *p = i2c->i2c_base + SMBUS_GEN_INT_MASK_REG_OFF;
634 	u16 regval;
635 
636 	regval = readw(p);
637 	if (enable)
638 		regval &= ~intr_msk;
639 	else
640 		regval |= intr_msk;
641 	writew(regval, p);
642 }
643 
pci1xxxx_i2c_configure_core_reg(struct pci1xxxx_i2c * i2c,bool enable)644 static void pci1xxxx_i2c_configure_core_reg(struct pci1xxxx_i2c *i2c, bool enable)
645 {
646 	void __iomem *p1 = i2c->i2c_base + SMB_CORE_CONFIG_REG1;
647 	void __iomem *p3 = i2c->i2c_base + SMB_CORE_CONFIG_REG3;
648 	u8 reg1;
649 	u8 reg3;
650 
651 	reg1 = readb(p1);
652 	reg3 = readb(p3);
653 	if (enable) {
654 		reg1 |= SMB_CONFIG1_ENAB | SMB_CONFIG1_FEN;
655 		reg3 |= SMB_CONFIG3_ENMI | SMB_CONFIG3_ENIDI;
656 	} else {
657 		reg1 &= ~(SMB_CONFIG1_ENAB | SMB_CONFIG1_FEN);
658 		reg3 &= ~(SMB_CONFIG3_ENMI | SMB_CONFIG3_ENIDI);
659 	}
660 
661 	writeb(reg1, p1);
662 	writeb(reg3, p3);
663 }
664 
pci1xxxx_i2c_set_freq(struct pci1xxxx_i2c * i2c)665 static void pci1xxxx_i2c_set_freq(struct pci1xxxx_i2c *i2c)
666 {
667 	void __iomem *bp = i2c->i2c_base;
668 	void __iomem *p_idle_scaling = bp + SMB_CORE_IDLE_SCALING_REG_OFF;
669 	void __iomem *p_data_timing = bp + SMB_CORE_DATA_TIMING_REG_OFF;
670 	void __iomem *p_hold_time = bp + SMB_CORE_SR_HOLD_TIME_REG_OFF;
671 	void __iomem *p_to_scaling = bp + SMB_CORE_TO_SCALING_REG_OFF;
672 	void __iomem *p_clk_sync = bp + SMB_CORE_CLK_SYNC_REG_OFF;
673 	void __iomem *p_clk_reg = bp + SMB_CORE_BUS_CLK_REG_OFF;
674 
675 	switch (i2c->freq) {
676 	case I2C_MAX_STANDARD_MODE_FREQ:
677 		writeb(SR_HOLD_TIME_100K_TICKS, p_hold_time);
678 		writel(SMB_IDLE_SCALING_100K, p_idle_scaling);
679 		writew(BUS_CLK_100K, p_clk_reg);
680 		writel(CLK_SYNC_100K, p_clk_sync);
681 		writel(DATA_TIMING_100K, p_data_timing);
682 		writel(TO_SCALING_100K, p_to_scaling);
683 		break;
684 
685 	case I2C_MAX_FAST_MODE_PLUS_FREQ:
686 		writeb(SR_HOLD_TIME_1000K_TICKS, p_hold_time);
687 		writel(SMB_IDLE_SCALING_1000K, p_idle_scaling);
688 		writew(BUS_CLK_1000K, p_clk_reg);
689 		writel(CLK_SYNC_1000K, p_clk_sync);
690 		writel(DATA_TIMING_1000K, p_data_timing);
691 		writel(TO_SCALING_1000K, p_to_scaling);
692 		break;
693 
694 	case I2C_MAX_FAST_MODE_FREQ:
695 	default:
696 		writeb(SR_HOLD_TIME_400K_TICKS, p_hold_time);
697 		writel(SMB_IDLE_SCALING_400K, p_idle_scaling);
698 		writew(BUS_CLK_400K, p_clk_reg);
699 		writel(CLK_SYNC_400K, p_clk_sync);
700 		writel(DATA_TIMING_400K, p_data_timing);
701 		writel(TO_SCALING_400K, p_to_scaling);
702 		break;
703 	}
704 }
705 
pci1xxxx_i2c_init(struct pci1xxxx_i2c * i2c)706 static void pci1xxxx_i2c_init(struct pci1xxxx_i2c *i2c)
707 {
708 	void __iomem *p2 = i2c->i2c_base + SMBUS_STATUS_REG_OFF;
709 	void __iomem *p1 = i2c->i2c_base + SMB_GPR_REG;
710 	u8 regval;
711 	int ret;
712 
713 	ret = set_sys_lock(i2c);
714 	if (ret == -EPERM) {
715 		/*
716 		 * Configure I2C Fast Mode as default frequency if unable
717 		 * to acquire sys lock.
718 		 */
719 		regval = 0;
720 	} else {
721 		regval = readl(p1);
722 		release_sys_lock(i2c);
723 	}
724 
725 	switch (regval) {
726 	case 0:
727 		i2c->freq = I2C_MAX_FAST_MODE_FREQ;
728 		pci1xxxx_i2c_set_freq(i2c);
729 		break;
730 	case 1:
731 		i2c->freq = I2C_MAX_STANDARD_MODE_FREQ;
732 		pci1xxxx_i2c_set_freq(i2c);
733 		break;
734 	case 2:
735 		i2c->freq = I2C_MAX_FAST_MODE_PLUS_FREQ;
736 		pci1xxxx_i2c_set_freq(i2c);
737 		break;
738 	case 3:
739 	default:
740 		break;
741 	}
742 
743 	pci1xxxx_i2c_config_padctrl(i2c, true);
744 	i2c->flags |= I2C_FLAGS_DIRECT_MODE;
745 	pci1xxxx_i2c_set_mode(i2c);
746 
747 	/*
748 	 * Added as a precaution since BUF_EMPTY in status register
749 	 * also trigered an Interrupt.
750 	 */
751 	writeb(STA_BUF_EMPTY, p2);
752 
753 	/* Configure core I2c control registers. */
754 	pci1xxxx_i2c_configure_core_reg(i2c, true);
755 
756 	/*
757 	 * Enable pull-up for the SMB alert pin which is just used for
758 	 * wakeup right now.
759 	 */
760 	pci1xxxx_i2c_configure_smbalert_pin(i2c, true);
761 }
762 
pci1xxxx_i2c_clear_flags(struct pci1xxxx_i2c * i2c)763 static void pci1xxxx_i2c_clear_flags(struct pci1xxxx_i2c *i2c)
764 {
765 	u8 regval;
766 
767 	/* Reset the internal buffer counters. */
768 	pci1xxxx_i2c_reset_counters(i2c);
769 
770 	/* Clear low level interrupts. */
771 	regval = COMPLETION_MNAKX | COMPLETION_IDLE | COMPLETION_MDONE;
772 	writeb(regval, i2c->i2c_base + SMB_CORE_COMPLETION_REG_OFF3);
773 	reinit_completion(&i2c->i2c_xfer_done);
774 	pci1xxxx_ack_nw_layer_intr(i2c, ALL_NW_LAYER_INTERRUPTS);
775 	pci1xxxx_ack_high_level_intr(i2c, ALL_HIGH_LAYER_INTR);
776 }
777 
pci1xxxx_i2c_read(struct pci1xxxx_i2c * i2c,u8 slaveaddr,unsigned char * buf,u16 total_len)778 static int pci1xxxx_i2c_read(struct pci1xxxx_i2c *i2c, u8 slaveaddr,
779 			     unsigned char *buf, u16 total_len)
780 {
781 	void __iomem *p2 = i2c->i2c_base + SMB_CORE_COMPLETION_REG_OFF3;
782 	void __iomem *p1 = i2c->i2c_base + SMB_CORE_CMD_REG_OFF1;
783 	void __iomem *p3 = i2c->i2c_base + SMBUS_MST_BUF;
784 	unsigned long time_left;
785 	u16 remainingbytes;
786 	u8 transferlen;
787 	int retval = 0;
788 	u8 read_count;
789 	u32 regval;
790 	u16 count;
791 
792 	/* Enable I2C host controller by setting the ESO bit in the CONTROL REG. */
793 	pci1xxxx_i2c_enable_ESO(i2c);
794 	pci1xxxx_i2c_clear_flags(i2c);
795 	pci1xxxx_config_nw_layer_intr(i2c, INTR_MSK_DMA_TERM, true);
796 	pci1xxxx_i2c_config_high_level_intr(i2c, I2C_BUF_MSTR_INTR_MASK, true);
797 
798 	/*
799 	 * The I2C transfer could be more than 128 bytes. Our Core is
800 	 * capable of only sending 128 at a time.
801 	 * As far as the I2C read is concerned, initailly send the
802 	 * read slave address along with the number of bytes to read in
803 	 * ReadCount. After sending the slave address the interrupt
804 	 * is generated. On seeing the ACK for the slave address, reverse the
805 	 * buffer direction and run the DMA to initiate Read from slave.
806 	 */
807 	for (count = 0; count < total_len; count += transferlen) {
808 
809 		/*
810 		 * Before start of any transaction clear the existing
811 		 * START/STOP conditions.
812 		 */
813 		writeb(0, p1);
814 		remainingbytes = total_len - count;
815 		transferlen = min_t(u16, remainingbytes, SMBUS_BUF_MAX_SIZE);
816 
817 		/*
818 		 * Send STOP bit for the last chunk in the transaction.
819 		 * For I2C read transaction of more than BUF_SIZE, NACK should
820 		 * only be sent for the last read.
821 		 * Hence a bit FW_ACK is set for all the read chunks except for
822 		 * the last chunk. For the last chunk NACK should be sent and
823 		 * FW_ACK is cleared Send STOP only when I2C_FLAGS_STOP bit is
824 		 * set in the flags and only for the last transaction.
825 		 */
826 		if ((count + transferlen >= total_len) &&
827 		    (i2c->flags & I2C_FLAGS_STOP)) {
828 			pci1xxxx_i2c_set_clear_FW_ACK(i2c, false);
829 			pci1xxxx_i2c_send_start_stop(i2c, 0);
830 		} else {
831 			pci1xxxx_i2c_set_clear_FW_ACK(i2c, true);
832 		}
833 
834 		/* Send START bit for the first transaction. */
835 		if (count == 0) {
836 			pci1xxxx_i2c_set_transfer_dir(i2c, I2C_DIRN_WRITE);
837 			pci1xxxx_i2c_send_start_stop(i2c, 1);
838 
839 			/* Write I2c buffer with just the slave addr. */
840 			pci1xxxx_i2c_buffer_write(i2c, slaveaddr, 0, NULL);
841 
842 			/* Set the count. Readcount is the transfer bytes. */
843 			pci1xxxx_i2c_set_count(i2c, 1, 1, transferlen);
844 
845 			/*
846 			 * Set the Auto_start_read bit so that the HW itself
847 			 * will take care of the read phase.
848 			 */
849 			pci1xxxx_i2c_config_asr(i2c, true);
850 			if (i2c->flags & I2C_FLAGS_SMB_BLK_READ)
851 				pci1xxxx_i2c_set_readm(i2c, true);
852 		} else {
853 			pci1xxxx_i2c_set_count(i2c, 0, 0, transferlen);
854 			pci1xxxx_i2c_config_asr(i2c, false);
855 			pci1xxxx_i2c_clear_flags(i2c);
856 			pci1xxxx_i2c_set_transfer_dir(i2c, I2C_DIRN_READ);
857 		}
858 
859 		/* Start the DMA. */
860 		pci1xxxx_i2c_start_DMA(i2c);
861 
862 		/* Wait for the DMA_TERM interrupt. */
863 		time_left = wait_for_completion_timeout(&i2c->i2c_xfer_done,
864 			    msecs_to_jiffies(PCI1XXXX_I2C_TIMEOUT_MS));
865 		if (time_left == 0) {
866 			/* Reset the I2C core to release the bus lock. */
867 			pci1xxxx_i2c_init(i2c);
868 			retval = -ETIMEDOUT;
869 			goto cleanup;
870 		}
871 
872 		/* Read the completion reg to know the reason for DMA_TERM. */
873 		regval = readb(p2);
874 
875 		/* Slave did not respond. */
876 		if (regval & COMPLETION_MNAKX) {
877 			writeb(COMPLETION_MNAKX, p2);
878 			retval = -ETIMEDOUT;
879 			goto cleanup;
880 		}
881 
882 		if (i2c->flags & I2C_FLAGS_SMB_BLK_READ) {
883 			buf[0] = readb(p3);
884 			read_count = buf[0];
885 			memcpy_fromio(&buf[1], p3 + 1, read_count);
886 		} else {
887 			memcpy_fromio(&buf[count], p3, transferlen);
888 		}
889 	}
890 
891 cleanup:
892 	/* Disable all the interrupts. */
893 	pci1xxxx_config_nw_layer_intr(i2c, INTR_MSK_DMA_TERM, false);
894 	pci1xxxx_i2c_config_high_level_intr(i2c, I2C_BUF_MSTR_INTR_MASK, false);
895 	pci1xxxx_i2c_config_asr(i2c, false);
896 	return retval;
897 }
898 
pci1xxxx_i2c_write(struct pci1xxxx_i2c * i2c,u8 slaveaddr,unsigned char * buf,u16 total_len)899 static int pci1xxxx_i2c_write(struct pci1xxxx_i2c *i2c, u8 slaveaddr,
900 			      unsigned char *buf, u16 total_len)
901 {
902 	void __iomem *p2 = i2c->i2c_base + SMB_CORE_COMPLETION_REG_OFF3;
903 	void __iomem *p1 = i2c->i2c_base + SMB_CORE_CMD_REG_OFF1;
904 	unsigned long time_left;
905 	u16 remainingbytes;
906 	u8 actualwritelen;
907 	u8 transferlen;
908 	int retval = 0;
909 	u32 regval;
910 	u16 count;
911 
912 	/* Enable I2C host controller by setting the ESO bit in the CONTROL REG. */
913 	pci1xxxx_i2c_enable_ESO(i2c);
914 
915 	/* Set the Buffer direction. */
916 	pci1xxxx_i2c_set_transfer_dir(i2c, I2C_DIRN_WRITE);
917 	pci1xxxx_config_nw_layer_intr(i2c, INTR_MSK_DMA_TERM, true);
918 	pci1xxxx_i2c_config_high_level_intr(i2c, I2C_BUF_MSTR_INTR_MASK, true);
919 
920 	/*
921 	 * The i2c transfer could be more than 128 bytes. Our Core is
922 	 * capable of only sending 128 at a time.
923 	 */
924 	for (count = 0; count < total_len; count += transferlen) {
925 		/*
926 		 * Before start of any transaction clear the existing
927 		 * START/STOP conditions.
928 		 */
929 		writeb(0, p1);
930 		pci1xxxx_i2c_clear_flags(i2c);
931 		remainingbytes = total_len - count;
932 
933 		/* If it is the starting of the transaction send START. */
934 		if (count == 0) {
935 			pci1xxxx_i2c_send_start_stop(i2c, 1);
936 
937 			/* -1 for the slave address. */
938 			transferlen = min_t(u16, SMBUS_BUF_MAX_SIZE - 1,
939 					    remainingbytes);
940 			pci1xxxx_i2c_buffer_write(i2c, slaveaddr,
941 						  transferlen, &buf[count]);
942 			/*
943 			 * The actual number of bytes written on the I2C bus
944 			 * is including the slave address.
945 			 */
946 			actualwritelen = transferlen + 1;
947 		} else {
948 			transferlen = min_t(u16, SMBUS_BUF_MAX_SIZE, remainingbytes);
949 			pci1xxxx_i2c_buffer_write(i2c, 0, transferlen, &buf[count]);
950 			actualwritelen = transferlen;
951 		}
952 
953 		pci1xxxx_i2c_set_count(i2c, actualwritelen, actualwritelen, 0);
954 
955 		/*
956 		 * Send STOP only when I2C_FLAGS_STOP bit is set in the flags and
957 		 * only for the last transaction.
958 		 */
959 		if (remainingbytes <= transferlen &&
960 		   (i2c->flags & I2C_FLAGS_STOP))
961 			pci1xxxx_i2c_send_start_stop(i2c, 0);
962 
963 		pci1xxxx_i2c_start_DMA(i2c);
964 
965 		/*
966 		 * Wait for the DMA_TERM interrupt.
967 		 */
968 		time_left = wait_for_completion_timeout(&i2c->i2c_xfer_done,
969 			    msecs_to_jiffies(PCI1XXXX_I2C_TIMEOUT_MS));
970 		if (time_left == 0) {
971 			/* Reset the I2C core to release the bus lock. */
972 			pci1xxxx_i2c_init(i2c);
973 			retval = -ETIMEDOUT;
974 			goto cleanup;
975 		}
976 
977 		regval = readb(p2);
978 		if (regval & COMPLETION_MNAKX) {
979 			writeb(COMPLETION_MNAKX, p2);
980 			retval = -ETIMEDOUT;
981 			goto cleanup;
982 		}
983 	}
984 cleanup:
985 	/* Disable all the interrupts. */
986 	pci1xxxx_config_nw_layer_intr(i2c, INTR_MSK_DMA_TERM, false);
987 	pci1xxxx_i2c_config_high_level_intr(i2c, I2C_BUF_MSTR_INTR_MASK, false);
988 
989 	return retval;
990 }
991 
pci1xxxx_i2c_xfer(struct i2c_adapter * adap,struct i2c_msg * msgs,int num)992 static int pci1xxxx_i2c_xfer(struct i2c_adapter *adap,
993 			     struct i2c_msg *msgs, int num)
994 {
995 	struct pci1xxxx_i2c *i2c = i2c_get_adapdata(adap);
996 	u8 slaveaddr;
997 	int retval;
998 	u32 i;
999 
1000 	i2c->i2c_xfer_in_progress = true;
1001 	for (i = 0; i < num; i++) {
1002 		slaveaddr = i2c_8bit_addr_from_msg(&msgs[i]);
1003 
1004 		/*
1005 		 * Send the STOP bit if the transfer is the final one or
1006 		 * if the I2C_M_STOP flag is set.
1007 		 */
1008 		if ((i == num - 1) || (msgs[i].flags & I2C_M_STOP))
1009 			i2c->flags |= I2C_FLAGS_STOP;
1010 		else
1011 			i2c->flags &= ~I2C_FLAGS_STOP;
1012 
1013 		if (msgs[i].flags & I2C_M_RECV_LEN)
1014 			i2c->flags |= I2C_FLAGS_SMB_BLK_READ;
1015 		else
1016 			i2c->flags &= ~I2C_FLAGS_SMB_BLK_READ;
1017 
1018 		if (msgs[i].flags & I2C_M_RD)
1019 			retval = pci1xxxx_i2c_read(i2c, slaveaddr,
1020 						   msgs[i].buf, msgs[i].len);
1021 		else
1022 			retval = pci1xxxx_i2c_write(i2c, slaveaddr,
1023 						    msgs[i].buf, msgs[i].len);
1024 
1025 		if (retval < 0)
1026 			break;
1027 	}
1028 	i2c->i2c_xfer_in_progress = false;
1029 
1030 	if (retval < 0)
1031 		return retval;
1032 
1033 	return num;
1034 }
1035 
1036 /*
1037  * List of supported functions by the driver.
1038  */
pci1xxxx_i2c_get_funcs(struct i2c_adapter * adap)1039 static u32 pci1xxxx_i2c_get_funcs(struct i2c_adapter *adap)
1040 {
1041 	return I2C_FUNC_I2C | I2C_FUNC_PROTOCOL_MANGLING |
1042 		I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
1043 		I2C_FUNC_SMBUS_BYTE |
1044 		I2C_FUNC_SMBUS_BYTE_DATA |
1045 		I2C_FUNC_SMBUS_WORD_DATA |
1046 		I2C_FUNC_SMBUS_PROC_CALL |
1047 		I2C_FUNC_SMBUS_BLOCK_DATA;
1048 }
1049 
1050 static const struct i2c_algorithm pci1xxxx_i2c_algo = {
1051 	.master_xfer = pci1xxxx_i2c_xfer,
1052 	.functionality = pci1xxxx_i2c_get_funcs,
1053 };
1054 
1055 static const struct i2c_adapter_quirks pci1xxxx_i2c_quirks = {
1056 	.flags = I2C_AQ_NO_ZERO_LEN,
1057 };
1058 
1059 static const struct i2c_adapter pci1xxxx_i2c_ops = {
1060 	.owner	= THIS_MODULE,
1061 	.name	= "PCI1xxxx I2C Adapter",
1062 	.algo	= &pci1xxxx_i2c_algo,
1063 	.quirks = &pci1xxxx_i2c_quirks,
1064 };
1065 
pci1xxxx_i2c_suspend(struct device * dev)1066 static int pci1xxxx_i2c_suspend(struct device *dev)
1067 {
1068 	struct pci1xxxx_i2c *i2c = dev_get_drvdata(dev);
1069 	void __iomem *p = i2c->i2c_base + SMBUS_RESET_REG;
1070 	struct pci_dev *pdev = to_pci_dev(dev);
1071 	u32 regval;
1072 
1073 	i2c_mark_adapter_suspended(&i2c->adap);
1074 
1075 	/*
1076 	 * If the system is put into 'suspend' state when the I2C transfer is in
1077 	 * progress, wait until the transfer completes.
1078 	 */
1079 	while (i2c->i2c_xfer_in_progress)
1080 		msleep(20);
1081 
1082 	pci1xxxx_i2c_config_high_level_intr(i2c, SMBALERT_WAKE_INTR_MASK, true);
1083 
1084 	/*
1085 	 * Enable the PERST_DIS bit to mask the PERST from resetting the core
1086 	 * registers.
1087 	 */
1088 	regval = readl(p);
1089 	regval |= PERI_SMBUS_D3_RESET_DIS;
1090 	writel(regval, p);
1091 
1092 	/* Enable PCI wake in the PMCSR register. */
1093 	device_set_wakeup_enable(dev, true);
1094 	pci_wake_from_d3(pdev, true);
1095 
1096 	return 0;
1097 }
1098 
pci1xxxx_i2c_resume(struct device * dev)1099 static int pci1xxxx_i2c_resume(struct device *dev)
1100 {
1101 	struct pci1xxxx_i2c *i2c = dev_get_drvdata(dev);
1102 	void __iomem *p1 = i2c->i2c_base + SMBUS_GEN_INT_STAT_REG_OFF;
1103 	void __iomem *p2 = i2c->i2c_base + SMBUS_RESET_REG;
1104 	struct pci_dev *pdev = to_pci_dev(dev);
1105 	u32 regval;
1106 
1107 	regval = readw(p1);
1108 	writew(regval, p1);
1109 	pci1xxxx_i2c_config_high_level_intr(i2c, SMBALERT_WAKE_INTR_MASK, false);
1110 	regval = readl(p2);
1111 	regval &= ~PERI_SMBUS_D3_RESET_DIS;
1112 	writel(regval, p2);
1113 	i2c_mark_adapter_resumed(&i2c->adap);
1114 	pci_wake_from_d3(pdev, false);
1115 	return 0;
1116 }
1117 
1118 static DEFINE_SIMPLE_DEV_PM_OPS(pci1xxxx_i2c_pm_ops, pci1xxxx_i2c_suspend,
1119 			 pci1xxxx_i2c_resume);
1120 
pci1xxxx_i2c_shutdown(void * data)1121 static void pci1xxxx_i2c_shutdown(void *data)
1122 {
1123 	struct pci1xxxx_i2c *i2c = data;
1124 
1125 	pci1xxxx_i2c_config_padctrl(i2c, false);
1126 	pci1xxxx_i2c_configure_core_reg(i2c, false);
1127 }
1128 
pci1xxxx_i2c_probe_pci(struct pci_dev * pdev,const struct pci_device_id * ent)1129 static int pci1xxxx_i2c_probe_pci(struct pci_dev *pdev,
1130 				  const struct pci_device_id *ent)
1131 {
1132 	struct device *dev = &pdev->dev;
1133 	struct pci1xxxx_i2c *i2c;
1134 	int ret;
1135 
1136 	i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
1137 	if (!i2c)
1138 		return -ENOMEM;
1139 
1140 	pci_set_drvdata(pdev, i2c);
1141 	i2c->i2c_xfer_in_progress = false;
1142 
1143 	ret = pcim_enable_device(pdev);
1144 	if (ret)
1145 		return ret;
1146 
1147 	pci_set_master(pdev);
1148 
1149 	/*
1150 	 * We are getting the base address of the SMB core. SMB core uses
1151 	 * BAR0 and size is 32K.
1152 	 */
1153 	ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
1154 	if (ret < 0)
1155 		return ret;
1156 
1157 	i2c->i2c_base =	pcim_iomap_table(pdev)[0];
1158 	init_completion(&i2c->i2c_xfer_done);
1159 	pci1xxxx_i2c_init(i2c);
1160 
1161 	ret = devm_add_action(dev, pci1xxxx_i2c_shutdown, i2c);
1162 	if (ret)
1163 		return ret;
1164 
1165 	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
1166 	if (ret < 0)
1167 		return ret;
1168 
1169 	ret = devm_request_irq(dev, pci_irq_vector(pdev, 0), pci1xxxx_i2c_isr,
1170 			       0, pci_name(pdev), i2c);
1171 	if (ret)
1172 		return ret;
1173 
1174 	i2c->adap = pci1xxxx_i2c_ops;
1175 	i2c->adap.dev.parent = dev;
1176 
1177 	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
1178 		 "MCHP PCI1xxxx i2c adapter at %s", pci_name(pdev));
1179 
1180 	i2c_set_adapdata(&i2c->adap, i2c);
1181 
1182 	ret = devm_i2c_add_adapter(dev, &i2c->adap);
1183 	if (ret)
1184 		return dev_err_probe(dev, ret, "i2c add adapter failed\n");
1185 
1186 	return 0;
1187 }
1188 
1189 static const struct pci_device_id pci1xxxx_i2c_pci_id_table[] = {
1190 	{ PCI_VDEVICE(EFAR, 0xA003) },
1191 	{ PCI_VDEVICE(EFAR, 0xA013) },
1192 	{ PCI_VDEVICE(EFAR, 0xA023) },
1193 	{ PCI_VDEVICE(EFAR, 0xA033) },
1194 	{ PCI_VDEVICE(EFAR, 0xA043) },
1195 	{ }
1196 };
1197 MODULE_DEVICE_TABLE(pci, pci1xxxx_i2c_pci_id_table);
1198 
1199 static struct pci_driver pci1xxxx_i2c_pci_driver = {
1200 	.name		= "i2c-mchp-pci1xxxx",
1201 	.id_table	= pci1xxxx_i2c_pci_id_table,
1202 	.probe		= pci1xxxx_i2c_probe_pci,
1203 	.driver = {
1204 		.pm = pm_sleep_ptr(&pci1xxxx_i2c_pm_ops),
1205 	},
1206 };
1207 module_pci_driver(pci1xxxx_i2c_pci_driver);
1208 
1209 MODULE_LICENSE("GPL");
1210 MODULE_AUTHOR("Tharun Kumar P<tharunkumar.pasumarthi@microchip.com>");
1211 MODULE_AUTHOR("Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com>");
1212 MODULE_DESCRIPTION("Microchip Technology Inc. pci1xxxx I2C bus driver");
1213