1 // SPDX-License-Identifier: ISC
2 /*
3  * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
4  */
5 
6 #include "mt76x2u.h"
7 #include "eeprom.h"
8 #include "../mt76x02_phy.h"
9 
10 static void
mt76x2u_phy_channel_calibrate(struct mt76x02_dev * dev,bool mac_stopped)11 mt76x2u_phy_channel_calibrate(struct mt76x02_dev *dev, bool mac_stopped)
12 {
13 	struct ieee80211_channel *chan = dev->mphy.chandef.chan;
14 	bool is_5ghz = chan->band == NL80211_BAND_5GHZ;
15 
16 	if (dev->cal.channel_cal_done)
17 		return;
18 
19 	if (mt76x2_channel_silent(dev))
20 		return;
21 
22 	if (!mac_stopped)
23 		mt76x2u_mac_stop(dev);
24 
25 	if (is_5ghz)
26 		mt76x02_mcu_calibrate(dev, MCU_CAL_LC, 0);
27 
28 	mt76x02_mcu_calibrate(dev, MCU_CAL_TX_LOFT, is_5ghz);
29 	mt76x02_mcu_calibrate(dev, MCU_CAL_TXIQ, is_5ghz);
30 	mt76x02_mcu_calibrate(dev, MCU_CAL_RXIQC_FI, is_5ghz);
31 	mt76x02_mcu_calibrate(dev, MCU_CAL_TEMP_SENSOR, 0);
32 	mt76x02_mcu_calibrate(dev, MCU_CAL_TX_SHAPING, 0);
33 
34 	if (!mac_stopped)
35 		mt76x2_mac_resume(dev);
36 	mt76x2_apply_gain_adj(dev);
37 	mt76x02_edcca_init(dev);
38 
39 	dev->cal.channel_cal_done = true;
40 }
41 
mt76x2u_phy_calibrate(struct work_struct * work)42 void mt76x2u_phy_calibrate(struct work_struct *work)
43 {
44 	struct mt76x02_dev *dev;
45 
46 	dev = container_of(work, struct mt76x02_dev, cal_work.work);
47 
48 	mutex_lock(&dev->mt76.mutex);
49 
50 	mt76x2u_phy_channel_calibrate(dev, false);
51 	mt76x2_phy_tssi_compensate(dev);
52 	mt76x2_phy_update_channel_gain(dev);
53 
54 	mutex_unlock(&dev->mt76.mutex);
55 
56 	ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work,
57 				     MT_CALIBRATE_INTERVAL);
58 }
59 
mt76x2u_phy_set_channel(struct mt76x02_dev * dev,struct cfg80211_chan_def * chandef)60 int mt76x2u_phy_set_channel(struct mt76x02_dev *dev,
61 			    struct cfg80211_chan_def *chandef)
62 {
63 	u32 ext_cca_chan[4] = {
64 		[0] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 0) |
65 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 1) |
66 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
67 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
68 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(0)),
69 		[1] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 1) |
70 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 0) |
71 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 2) |
72 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 3) |
73 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(1)),
74 		[2] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 2) |
75 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 3) |
76 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
77 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
78 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(2)),
79 		[3] = FIELD_PREP(MT_EXT_CCA_CFG_CCA0, 3) |
80 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA1, 2) |
81 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA2, 1) |
82 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA3, 0) |
83 		      FIELD_PREP(MT_EXT_CCA_CFG_CCA_MASK, BIT(3)),
84 	};
85 	bool scan = test_bit(MT76_SCANNING, &dev->mphy.state);
86 	struct ieee80211_channel *chan = chandef->chan;
87 	u8 channel = chan->hw_value, bw, bw_index;
88 	int ch_group_index, freq, freq1, ret;
89 
90 	dev->cal.channel_cal_done = false;
91 	freq = chandef->chan->center_freq;
92 	freq1 = chandef->center_freq1;
93 
94 	switch (chandef->width) {
95 	case NL80211_CHAN_WIDTH_40:
96 		bw = 1;
97 		if (freq1 > freq) {
98 			bw_index = 1;
99 			ch_group_index = 0;
100 		} else {
101 			bw_index = 3;
102 			ch_group_index = 1;
103 		}
104 		channel += 2 - ch_group_index * 4;
105 		break;
106 	case NL80211_CHAN_WIDTH_80:
107 		ch_group_index = (freq - freq1 + 30) / 20;
108 		if (WARN_ON(ch_group_index < 0 || ch_group_index > 3))
109 			ch_group_index = 0;
110 		bw = 2;
111 		bw_index = ch_group_index;
112 		channel += 6 - ch_group_index * 4;
113 		break;
114 	default:
115 		bw = 0;
116 		bw_index = 0;
117 		ch_group_index = 0;
118 		break;
119 	}
120 
121 	mt76x2_read_rx_gain(dev);
122 	mt76x2_phy_set_txpower_regs(dev, chan->band);
123 	mt76x2_configure_tx_delay(dev, chan->band, bw);
124 	mt76x2_phy_set_txpower(dev);
125 
126 	mt76x02_phy_set_band(dev, chan->band, ch_group_index & 1);
127 	mt76x02_phy_set_bw(dev, chandef->width, ch_group_index);
128 
129 	mt76_rmw(dev, MT_EXT_CCA_CFG,
130 		 (MT_EXT_CCA_CFG_CCA0 |
131 		  MT_EXT_CCA_CFG_CCA1 |
132 		  MT_EXT_CCA_CFG_CCA2 |
133 		  MT_EXT_CCA_CFG_CCA3 |
134 		  MT_EXT_CCA_CFG_CCA_MASK),
135 		 ext_cca_chan[ch_group_index]);
136 
137 	ret = mt76x2_mcu_set_channel(dev, channel, bw, bw_index, scan);
138 	if (ret)
139 		return ret;
140 
141 	mt76x2_mcu_init_gain(dev, channel, dev->cal.rx.mcu_gain, true);
142 
143 	/* Enable LDPC Rx */
144 	if (mt76xx_rev(dev) >= MT76XX_REV_E3)
145 		mt76_set(dev, MT_BBP(RXO, 13), BIT(10));
146 
147 	if (!dev->cal.init_cal_done) {
148 		u8 val = mt76x02_eeprom_get(dev, MT_EE_BT_RCAL_RESULT);
149 
150 		if (val != 0xff)
151 			mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0);
152 	}
153 
154 	mt76x02_mcu_calibrate(dev, MCU_CAL_RXDCOC, channel);
155 
156 	/* Rx LPF calibration */
157 	if (!dev->cal.init_cal_done)
158 		mt76x02_mcu_calibrate(dev, MCU_CAL_RC, 0);
159 	dev->cal.init_cal_done = true;
160 
161 	mt76_wr(dev, MT_BBP(AGC, 61), 0xff64a4e2);
162 	mt76_wr(dev, MT_BBP(AGC, 7), 0x08081010);
163 	mt76_wr(dev, MT_BBP(AGC, 11), 0x00000404);
164 	mt76_wr(dev, MT_BBP(AGC, 2), 0x00007070);
165 	mt76_wr(dev, MT_TXOP_CTRL_CFG, 0X04101b3f);
166 
167 	mt76_set(dev, MT_BBP(TXO, 4), BIT(25));
168 	mt76_set(dev, MT_BBP(RXO, 13), BIT(8));
169 
170 	if (scan)
171 		return 0;
172 
173 	mt76x2u_phy_channel_calibrate(dev, true);
174 	mt76x02_init_agc_gain(dev);
175 
176 	if (mt76x2_tssi_enabled(dev)) {
177 		/* init default values for temp compensation */
178 		mt76_rmw_field(dev, MT_TX_ALC_CFG_1, MT_TX_ALC_CFG_1_TEMP_COMP,
179 			       0x38);
180 		mt76_rmw_field(dev, MT_TX_ALC_CFG_2, MT_TX_ALC_CFG_2_TEMP_COMP,
181 			       0x38);
182 
183 		/* init tssi calibration */
184 		if (!mt76x2_channel_silent(dev)) {
185 			struct ieee80211_channel *chan;
186 			u32 flag = 0;
187 
188 			chan = dev->mphy.chandef.chan;
189 			if (chan->band == NL80211_BAND_5GHZ)
190 				flag |= BIT(0);
191 			if (mt76x02_ext_pa_enabled(dev, chan->band))
192 				flag |= BIT(8);
193 			mt76x02_mcu_calibrate(dev, MCU_CAL_TSSI, flag);
194 			dev->cal.tssi_cal_done = true;
195 		}
196 	}
197 
198 	ieee80211_queue_delayed_work(mt76_hw(dev), &dev->cal_work,
199 				     MT_CALIBRATE_INTERVAL);
200 	return 0;
201 }
202