Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7 |
|
#
011849e0 |
| 16-Oct-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: move state from struct mt76_dev to mt76_phy
Allows keeping per-wiphy state separate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
#
96747a51 |
| 12-Oct-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: move channel state to struct mt76_phy
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concur
mt76: move channel state to struct mt76_phy
Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3 |
|
#
0e3d6777 |
| 24-Jul-2019 |
Ryder Lee <ryder.lee@mediatek.com> |
mt76: switch to SPDX tag instead of verbose boilerplate text
No functional change intended.
Add SPDX identifiers to all remaining files in /mt76.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
mt76: switch to SPDX tag instead of verbose boilerplate text
No functional change intended.
Add SPDX identifiers to all remaining files in /mt76.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2 |
|
#
8aac454d |
| 11-May-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
Run mt76x02_edcca_init atomically in mt76_edcca_set since it runs concurrently with calibration work and mt76x2_set_channel. Moreov
mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
Run mt76x02_edcca_init atomically in mt76_edcca_set since it runs concurrently with calibration work and mt76x2_set_channel. Moreover perform phy calibration atomically
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
a78f1547 |
| 11-May-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt76x02: remove enable from mt76x02_edcca_init signature
Remove enable parameter from mt76x02_edcca_init routine signature since it is always true
Signed-off-by: Lorenzo Bianconi <lorenzo@ker
mt76: mt76x02: remove enable from mt76x02_edcca_init signature
Remove enable parameter from mt76x02_edcca_init routine signature since it is always true
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26 |
|
#
2858f60a |
| 25-Feb-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: mt76x2: unify mt76x2[u]_mac_resume
They are now the same and short enough to be turned into an inline function
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
#
4606a26c |
| 25-Feb-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: mt76x02: fix ED/CCA enabling/disabling
ED/CCA needs to be disable before stopping the MAC to avoid hangs from tx being blocked. It must only be enabled again after the MAC has been started aga
mt76: mt76x02: fix ED/CCA enabling/disabling
ED/CCA needs to be disable before stopping the MAC to avoid hangs from tx being blocked. It must only be enabled again after the MAC has been started again. In many places this wasn't done properly, so fix this by always clearing the relevant ED/CCA bits in mt76x2_mac_stop and set it up again after channel change or calibration is done
Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18 |
|
#
4ece1e0a |
| 09-Nov-2018 |
Stanislaw Gruszka <sgruszka@redhat.com> |
mt76: remove wait argument from mt76x02_mcu_calibrate
We always wait for CMD_CALIBRATION_OP mcu message, but wait argument is used for do additional MT_MCU_COM_REG0 register operations, which are ne
mt76: remove wait argument from mt76x02_mcu_calibrate
We always wait for CMD_CALIBRATION_OP mcu message, but wait argument is used for do additional MT_MCU_COM_REG0 register operations, which are needed for mt76x2e devices and we can use appropriate check instead of wait argument.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
04289783 |
| 06-Nov-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2u: phy: run phy_channel_calibrate after channel switch
Perform channel calibration after each channel switch and not only after connection establishment since NetworkManager perform multiple f
mt76x2u: phy: run phy_channel_calibrate after channel switch
Perform channel calibration after each channel switch and not only after connection establishment since NetworkManager perform multiple frequency scanning if RSSI in lower a given threshold
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
4f833fad |
| 06-Nov-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2u: phy: add TX_SHAPING calibration
Add MCU_CAL_TX_SHAPING calibration in mt76x2u_phy_channel_calibrate routine since now mt76x2 and mt76x2u driver run the same firmware
Signed-off-by: Lorenzo
mt76x2u: phy: add TX_SHAPING calibration
Add MCU_CAL_TX_SHAPING calibration in mt76x2u_phy_channel_calibrate routine since now mt76x2 and mt76x2u driver run the same firmware
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15 |
|
#
989582e5 |
| 14-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2u: align channel gain logic to mt76x2 one
Update vga tuning algorithm to the one used in mt76x2 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietk
mt76x2u: align channel gain logic to mt76x2 one
Update vga tuning algorithm to the one used in mt76x2 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v4.18.14 |
|
#
4afeb396 |
| 12-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x0: eeprom: introduce mt76x0_tssi_enabled routine
Add mt76x0_tssi_enabled in order to check if tssi compensation is enabled since mt76x0 condition differs from mt76x2 one. Moreover move back mt7
mt76x0: eeprom: introduce mt76x0_tssi_enabled routine
Add mt76x0_tssi_enabled in order to check if tssi compensation is enabled since mt76x0 condition differs from mt76x2 one. Moreover move back mt76x02_temp_tx_alc_enabled and mt76x02_tssi_enabled routines in mt76x2/eeprom.h since they are mt76x2 specific
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
370c6415 |
| 12-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: move mt76x02_phy_set_band in mt76x02-lib module
Move mt76x02_phy_set_band routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code
Signed-off-b
mt76: move mt76x02_phy_set_band in mt76x02-lib module
Move mt76x02_phy_set_band routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
032c08f4 |
| 12-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: move mt76x02_phy_set_bw in mt76x02-lib module
Move mt76x02_phy_set_bw routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code
Signed-off-by: L
mt76: move mt76x02_phy_set_bw in mt76x02-lib module
Move mt76x02_phy_set_bw routine in mt76x02_phy.c since it is shared between mt76x0 and mt76x2 drivers and remove duplicated code
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v4.18.13 |
|
#
26a9daa6 |
| 07-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c
Use mt76x02_dev data structure as reference in mt76x02_eeprom.c instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@r
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_eeprom.c
Use mt76x02_dev data structure as reference in mt76x02_eeprom.c instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
bfdff5d0 |
| 07-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c
Use mt76x02_dev data structure as reference in mt76x02_phy.c instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_phy.c
Use mt76x02_dev data structure as reference in mt76x02_phy.c instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
499cd0aa |
| 07-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c
Use mt76x02_dev data structure as reference in mt76x02_mcu.c instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.
mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mcu.c
Use mt76x02_dev data structure as reference in mt76x02_mcu.c instead of mt76_dev
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
e40803f2 |
| 04-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2: move mt76x2_dev in mt76x02_util.h
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev in order to be shared between mt76x2 and mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lore
mt76x2: move mt76x2_dev in mt76x02_util.h
Move mt76x2_dev in mt76x02_util.h and rename it in mt76x02_dev in order to be shared between mt76x2 and mt76x0 driver
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
50b9e8d5 |
| 04-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.c
Move mt76x02_phy_get_min_avg_rssi in mt76x02-lib module since it will be used by mt76x0 driver in order to unify rxwi parsing
Signed-off-by:
mt76: move mt76x02_phy_get_min_avg_rssi in mt76x02_phy.c
Move mt76x02_phy_get_min_avg_rssi in mt76x02-lib module since it will be used by mt76x0 driver in order to unify rxwi parsing
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v4.18.12 |
|
#
1613c621 |
| 01-Oct-2018 |
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> |
mt76x2: move mt76x2 source files to mt76x2 folder
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and leave just shared code in mt76 root folder
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com
mt76x2: move mt76x2 source files to mt76x2 folder
Move mt76x2 and mt76x2u drivers to mt76x2 subfolder and leave just shared code in mt76 root folder
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7 |
|
#
011849e0 |
| 16-Oct-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: move state from struct mt76_dev to mt76_phy Allows keeping per-wiphy state separate Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
#
96747a51 |
| 12-Oct-2019 |
Felix Fietkau <nbd@nbd.name> |
mt76: move channel state to struct mt76_phy Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to suppor
mt76: move channel state to struct mt76_phy Add support for an extra wiphy in mt76_set_channel and mt76_get_survey This is preparation for supporting multiple wiphys per device to support the concurrent dual-band feature of MT7615D Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3 |
|
#
0e3d6777 |
| 24-Jul-2019 |
Ryder Lee <ryder.lee@mediatek.com> |
mt76: switch to SPDX tag instead of verbose boilerplate text No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <
mt76: switch to SPDX tag instead of verbose boilerplate text No functional change intended. Add SPDX identifiers to all remaining files in /mt76. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
Revision tags: v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2 |
|
#
8aac454d |
| 11-May-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set Run mt76x02_edcca_init atomically in mt76_edcca_set since it runs concurrently with calibration work and mt76x2_set_cha
mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set Run mt76x02_edcca_init atomically in mt76_edcca_set since it runs concurrently with calibration work and mt76x2_set_channel. Moreover perform phy calibration atomically Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|
#
a78f1547 |
| 11-May-2019 |
Lorenzo Bianconi <lorenzo@kernel.org> |
mt76: mt76x02: remove enable from mt76x02_edcca_init signature Remove enable parameter from mt76x02_edcca_init routine signature since it is always true Signed-off-by: Lorenzo B
mt76: mt76x02: remove enable from mt76x02_edcca_init signature Remove enable parameter from mt76x02_edcca_init routine signature since it is always true Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
show more ...
|