Kconfig - OpenGrok cross reference for /openbmc/u-boot/drivers/spi/Kconfig

16 	  typically use driver-private data instead of extending the
24 	  by providing an high-level interface to send memory-like commands.
31 	  Enable the Altera SPI driver. This driver can be used to
40 	  Enable the Aspeed AST2500 FMC/SPI driver. This driver can be
54 	  Enable the Andestech ATCSPI200 SPI driver. This driver can be
65 	  please refer to doc/device-tree-bindings/spi/spi-ath79.txt.
72 	  many AT91 (ARM) chips. This driver can be used to access
79 	  Enable the BCM6328 HSSPI driver. This driver can be used to
87 	  Enable the BCM6348/BCM6358 SPI driver. This driver can be used to
94 	  Enable the Broadcom set-top box SPI driver. This driver can
101 	  Enable the Cadence Quad-SPI (QSPI) driver. This driver can be
108 	  Enable the Designware SPI driver. This driver can be used to
115 	  Enable the Samsung Exynos SPI driver. This driver can be used to
122 	  Enable the Freescale DSPI driver. This driver can be used to
131 	  Enable the Intel ICH SPI driver. This driver can be used to
140 	  This driver can be used to access the SPI NOR flash chips on
153 	  Enable the MT7621 SPI driver. This driver can be used to access
161 	  Enable the Mediatek QSPI driver. This driver can be
169 	  Enable the Marvell Armada 3700 SPI driver. This driver can be
177 	  Enable the Microchip PIC32 SPI driver. This driver can be used
178 	  to access the SPI NOR flash, MMC-over-SPI on platforms based on
211 	  bus. Devices can be attached to the bus using the device tree
215 	  for "sandbox,spi-flash", which is in drivers/mtd/spi/sandbox.c.
218 		#address-cells = <1>;
219 		#size-cells = <0>;
222 		cs-gpios = <0>, <&gpio_a 0>;
225 			compatible = "spansion,m25p16", "sandbox,spi-flash";
226 			spi-max-frequency = <40000000>;
236 	  Same controller driver can reuse in all Allwinner SoC variants.
243 	  Enable the STM32F7 Quad-SPI (QSPI) driver. This driver can be
250 	  Enable the nVidia Tegra114 SPI driver. This driver can be used to
261 	  can be used to access the SPI NOR flash on platforms embedding this
267 	  Enable the nVidia Tegra20/Tegra30 SLINK driver. This driver can
274 	  Enable the Tegra Quad-SPI (QSPI) driver for T210. This driver
284 	  see driver file - drivers/spi/xilinx_spi.c
287 	bool "Zynq SPI driver"
290 	  Enable the Zynq SPI driver. This driver can be used to
291 	  access the SPI NOR flash on platforms embedding this Zynq
295 	bool "Zynq QSPI driver"
299 	  Enable the Zynq Quad-SPI (QSPI) driver. This driver can be
301 	  Zynq QSPI IP core. This IP is used to connect the flash in
302 	  4-bit qspi, 8-bit dual stacked and shared 4-bit dual parallel.
323 	  Enable MSCC bitbang SPI driver. This driver can be used on
329 	  Enable the ColdFire SPI driver. This driver can be used on
335 	  Enable the Freescale eSPI driver. This driver can be used to
343 	  Enable the Freescale Quad-SPI (QSPI) driver. This driver can be
356 	  Enable the SuperH SPI controller driver. This driver can be used
362 	  Enable the Renesas Quad SPI controller driver. This driver can be
368 	  Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms.
390 	  Enable the MXC SPI controller driver. This driver can be used
396 	  Enable the MXS SPI controller driver. This driver can be used