arm/dts/am335x-igep0033.dtsi

2  * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
4  * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
11 /dts-v1/;
14 #include <dt-bindings/interrupt-controller/irq.h>
19 			cpu0-supply = <&vdd1_reg>;
29 		pinctrl-names = "default";
30 		pinctrl-0 = <&leds_pins>;
32 		compatible = "gpio-leds";
37 			default-state = "on";
42 		compatible = "regulator-fixed";
43 		regulator-name = "vbat";
44 		regulator-min-microvolt = <5000000>;
45 		regulator-max-microvolt = <5000000>;
46 		regulator-boot-on;
50 		compatible = "regulator-fixed";
51 		regulator-name = "vmmc";
52 		regulator-min-microvolt = <3300000>;
53 		regulator-max-microvolt = <3300000>;
59 		pinctrl-single,pins = <
66 		pinctrl-single,pins = <
86 		pinctrl-single,pins = <
93 		pinctrl-single,pins = <
109 	phy-mode = "rmii";
114 	phy-mode = "rmii";
118 	rmii-clock-ext;
127 	pinctrl-names = "default";
128 	pinctrl-0 = <&nandflash_pins>;
130 	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
132 	nand@0,0 {
133 		compatible = "ti,omap2-nand";
135 		interrupt-parent = <&gpmc>;
138 		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
139 		nand-bus-width = <8>;
140 		ti,nand-ecc-opt = "bch8";
141 		gpmc,device-width = <1>;
142 		gpmc,sync-clk-ps = <0>;
143 		gpmc,cs-on-ns = <0>;
144 		gpmc,cs-rd-off-ns = <44>;
145 		gpmc,cs-wr-off-ns = <44>;
146 		gpmc,adv-on-ns = <6>;
147 		gpmc,adv-rd-off-ns = <34>;
148 		gpmc,adv-wr-off-ns = <44>;
149 		gpmc,we-on-ns = <0>;
150 		gpmc,we-off-ns = <40>;
151 		gpmc,oe-on-ns = <0>;
152 		gpmc,oe-off-ns = <54>;
153 		gpmc,access-ns = <64>;
154 		gpmc,rd-cycle-ns = <82>;
155 		gpmc,wr-cycle-ns = <82>;
156 		gpmc,bus-turnaround-ns = <0>;
157 		gpmc,cycle2cycle-delay-ns = <0>;
158 		gpmc,clk-activation-ns = <0>;
159 		gpmc,wr-access-ns = <40>;
160 		gpmc,wr-data-mux-bus-ns = <0>;
162 		#address-cells = <1>;
163 		#size-cells = <1>;
164 		ti,elm-id = <&elm>;
173 			label = "U-boot";
178 			label = "U-Boot Env";
196 	pinctrl-names = "default";
197 	pinctrl-0 = <&i2c0_pins>;
199 	clock-frequency = <400000>;
208 	vmmc-supply = <&vmmc>;
209 	bus-width = <4>;
214 	pinctrl-names = "default";
215 	pinctrl-0 = <&uart0_pins>;
250 	vcc1-supply = <&vbat>;
251 	vcc2-supply = <&vbat>;
252 	vcc3-supply = <&vbat>;
253 	vcc4-supply = <&vbat>;
254 	vcc5-supply = <&vbat>;
255 	vcc6-supply = <&vbat>;
256 	vcc7-supply = <&vbat>;
257 	vccio-supply = <&vbat>;
261 			regulator-always-on;
265 			regulator-always-on;
269 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
270 			regulator-name = "vdd_mpu";
271 			regulator-min-microvolt = <912500>;
272 			regulator-max-microvolt = <1312500>;
273 			regulator-boot-on;
274 			regulator-always-on;
278 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
279 			regulator-name = "vdd_core";
280 			regulator-min-microvolt = <912500>;
281 			regulator-max-microvolt = <1150000>;
282 			regulator-boot-on;
283 			regulator-always-on;
287 			regulator-always-on;
291 			regulator-always-on;
295 			regulator-always-on;
299 			regulator-always-on;
303 			regulator-always-on;
307 			regulator-always-on;
311 			regulator-always-on;
315 			regulator-always-on;
319 			regulator-always-on;