Lines Matching +full:adp +full:- +full:disable
1 // SPDX-License-Identifier: GPL-2.0+
6 /dts-v1/;
12 compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
22 stdout-path = &lpuart0;
30 reserved-memory {
31 #address-cells = <2>;
32 #size-cells = <2>;
37 * This will be automatically added to dtb if OP-TEE is installed.
40 * no-map;
46 compatible = "shared-dma-pool";
49 alloc-ranges = <0 0x98000000 0 0x14000000>;
50 linux,cma-default;
54 mux3_en: regulator-0 {
55 compatible = "regulator-fixed";
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
58 regulator-name = "mux3_en";
60 regulator-always-on;
63 reg_fec1_sel: regulator-1 {
64 compatible = "regulator-fixed";
65 regulator-name = "fec1_supply";
66 regulator-min-microvolt = <3300000>;
67 regulator-max-microvolt = <3300000>;
69 regulator-always-on;
73 reg_fec1_io: regulator-2 {
74 compatible = "regulator-fixed";
75 regulator-name = "fec1_io_supply";
76 regulator-min-microvolt = <1800000>;
77 regulator-max-microvolt = <1800000>;
79 enable-active-high;
80 regulator-always-on;
84 reg_usdhc2_vmmc: regulator-3 {
85 compatible = "regulator-fixed";
86 regulator-name = "SD1_SPWR";
87 regulator-min-microvolt = <3000000>;
88 regulator-max-microvolt = <3000000>;
90 enable-active-high;
91 off-on-delay-us = <3480>;
94 reg_vref_1v8: regulator-adc-vref {
95 compatible = "regulator-fixed";
96 regulator-name = "vref_1v8";
97 regulator-min-microvolt = <1800000>;
98 regulator-max-microvolt = <1800000>;
101 mii_select: regulator-4 {
102 compatible = "regulator-fixed";
103 regulator-name = "mii-select";
104 regulator-min-microvolt = <3300000>;
105 regulator-max-microvolt = <3300000>;
107 enable-active-high;
108 regulator-always-on;
113 vref-supply = <®_vref_1v8>;
118 pinctrl-names = "default";
119 pinctrl-0 = <&pinctrl_eqos>;
120 phy-mode = "rgmii-id";
121 phy-handle = <ðphy0>;
122 nvmem-cells = <&fec_mac1>;
123 nvmem-cell-names = "mac-address";
127 compatible = "snps,dwmac-mdio";
128 #address-cells = <1>;
129 #size-cells = <0>;
131 ethphy0: ethernet-phy@0 {
132 compatible = "ethernet-phy-ieee802.3-c22";
134 eee-broken-1000t;
135 qca,disable-smarteee;
136 qca,disable-hibernation-mode;
137 reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
138 reset-assert-us = <20>;
139 reset-deassert-us = <200000>;
140 vddio-supply = <&vddio0>;
142 vddio0: vddio-regulator {
143 regulator-min-microvolt = <1800000>;
144 regulator-max-microvolt = <1800000>;
153 * Please disable usdhc2 to enable fec1
156 pinctrl-names = "default";
157 pinctrl-0 = <&pinctrl_fec1>;
158 phy-mode = "rgmii-txid";
159 phy-handle = <ðphy1>;
160 fsl,magic-packet;
161 rx-internal-delay-ps = <2000>;
162 nvmem-cells = <&fec_mac0>;
163 nvmem-cell-names = "mac-address";
167 #address-cells = <1>;
168 #size-cells = <0>;
170 ethphy1: ethernet-phy@1 {
171 compatible = "ethernet-phy-ieee802.3-c22";
173 reset-gpios = <&pca6416_1 0 GPIO_ACTIVE_LOW>;
174 reset-assert-us = <10000>;
175 qca,disable-smarteee;
176 vddio-supply = <&vddio1>;
178 vddio1: vddio-regulator {
179 regulator-min-microvolt = <1800000>;
180 regulator-max-microvolt = <1800000>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&pinctrl_flexspi0>;
189 nxp,fspi-dll-slvdly = <4>;
194 #address-cells = <1>;
195 #size-cells = <1>;
196 compatible = "jedec,spi-nor";
197 spi-max-frequency = <133000000>;
198 spi-tx-bus-width = <8>;
199 spi-rx-bus-width = <8>;
204 #address-cells = <1>;
205 #size-cells = <0>;
206 clock-frequency = <100000>;
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_i2c2>;
214 gpio-controller;
215 #gpio-cells = <2>;
221 gpio-controller;
222 #gpio-cells = <2>;
225 pca9548_1: i2c-mux@70 {
227 #address-cells = <1>;
228 #size-cells = <0>;
232 #address-cells = <1>;
233 #size-cells = <0>;
239 gpio-controller;
240 #gpio-cells = <2>;
246 #address-cells = <1>;
247 #size-cells = <0>;
252 #address-cells = <1>;
253 #size-cells = <0>;
258 #address-cells = <1>;
259 #size-cells = <0>;
266 pinctrl-names = "default";
267 pinctrl-0 = <&pinctrl_lpuart0>;
280 pmic-thermal {
281 polling-delay-passive = <250>;
282 polling-delay = <2000>;
283 thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
299 cooling-maps {
302 cooling-device =
312 fsl,tx-d-cal = <114>;
317 pinctrl-names = "default";
318 pinctrl-0 = <&pinctrl_usbotg1>;
319 srp-disable;
320 hnp-disable;
321 adp-disable;
322 power-active-high;
323 disable-over-current;
329 fsl,tx-d-cal = <111>;
334 pinctrl-names = "default";
335 pinctrl-0 = <&pinctrl_usbotg2>;
336 srp-disable;
337 hnp-disable;
338 adp-disable;
339 power-active-high;
340 disable-over-current;
345 pinctrl-names = "default";
346 pinctrl-0 = <&pinctrl_usdhc1>;
347 bus-width = <8>;
348 no-sd;
349 no-sdio;
350 non-removable;
355 pinctrl-names = "default";
356 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
357 bus-width = <4>;
358 vmmc-supply = <®_usdhc2_vmmc>;
359 cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
360 wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
365 fsl,spi-only-use-cs1-sel;
366 pinctrl-names = "default";
367 pinctrl-0 = <&pinctrl_lpspi3>;
368 pinctrl-assert-gpios = <&pca6416_1 7 GPIO_ACTIVE_HIGH>;
374 spi-max-frequency = <30000000>;
379 pinctrl-names = "default";
380 pinctrl-0 = <&pinctrl_hog>;