Lines Matching +full:da9063 +full:- +full:rtc
2 * Support for imx6 based Advantech DMS-BA16 Qseven module
7 * This file is dual-licensed: you can use it either under the terms
46 #include <dt-bindings/gpio/gpio.h>
55 compatible = "pwm-backlight";
56 pinctrl-names = "default";
57 pinctrl-0 = <&pinctrl_display>;
59 brightness-levels = < 0 1 2 3 4 5 6 7 8 9
85 default-brightness-level = <255>;
86 enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
89 reg_1p8v: regulator-1p8v {
90 compatible = "regulator-fixed";
91 regulator-name = "1P8V";
92 regulator-min-microvolt = <1800000>;
93 regulator-max-microvolt = <1800000>;
94 regulator-always-on;
97 reg_3p3v: regulator-3p3v {
98 compatible = "regulator-fixed";
99 regulator-name = "3P3V";
100 regulator-min-microvolt = <3300000>;
101 regulator-max-microvolt = <3300000>;
102 regulator-always-on;
105 reg_lvds: regulator-lvds {
106 compatible = "regulator-fixed";
107 regulator-name = "lvds_ppen";
108 regulator-min-microvolt = <3300000>;
109 regulator-max-microvolt = <3300000>;
110 regulator-boot-on;
112 enable-active-high;
115 reg_usb_h1_vbus: regulator-usbh1vbus {
116 compatible = "regulator-fixed";
117 regulator-name = "usb_h1_vbus";
118 regulator-min-microvolt = <5000000>;
119 regulator-max-microvolt = <5000000>;
122 reg_usb_otg_vbus: regulator-usbotgvbus {
123 compatible = "regulator-fixed";
124 regulator-name = "usb_otg_vbus";
125 regulator-min-microvolt = <5000000>;
126 regulator-max-microvolt = <5000000>;
127 pinctrl-0 = <&pinctrl_usbotg_vbus>;
129 enable-active-high;
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_audmux>;
140 cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
141 pinctrl-names = "default";
142 pinctrl-0 = <&pinctrl_ecspi1>;
146 compatible = "jedec,spi-nor";
147 #address-cells = <1>;
148 #size-cells = <1>;
149 spi-max-frequency = <20000000>;
153 label = "U-Boot";
175 pinctrl-names = "default";
176 pinctrl-0 = <&pinctrl_enet>;
177 phy-mode = "rgmii-id";
178 phy-supply = <®_3p3v>;
179 phy-handle = <&phy0>;
183 #address-cells = <1>;
184 #size-cells = <0>;
186 phy0: ethernet-phy@4 {
188 qca,clk-out-frequency = <125000000>;
194 ddc-i2c-bus = <&i2c2>;
199 clock-frequency = <100000>;
200 pinctrl-names = "default";
201 pinctrl-0 = <&pinctrl_i2c1>;
206 clock-frequency = <100000>;
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_i2c2>;
213 clock-frequency = <100000>;
214 pinctrl-names = "default";
215 pinctrl-0 = <&pinctrl_i2c3>;
219 compatible = "dlg,da9063";
221 pinctrl-names = "default";
222 pinctrl-0 = <&pinctrl_pmic>;
223 interrupt-parent = <&gpio7>;
227 compatible = "dlg,da9063-onkey";
232 regulator-min-microvolt = <1420000>;
233 regulator-max-microvolt = <1420000>;
234 regulator-always-on;
235 regulator-boot-on;
239 regulator-min-microvolt = <1420000>;
240 regulator-max-microvolt = <1420000>;
241 regulator-always-on;
242 regulator-boot-on;
246 regulator-min-microvolt = <1500000>;
247 regulator-max-microvolt = <1500000>;
248 regulator-always-on;
249 regulator-boot-on;
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <1800000>;
255 regulator-always-on;
256 regulator-boot-on;
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
262 regulator-always-on;
263 regulator-boot-on;
267 regulator-min-microvolt = <3300000>;
268 regulator-max-microvolt = <3300000>;
269 regulator-always-on;
270 regulator-boot-on;
274 regulator-min-microvolt = <600000>;
275 regulator-max-microvolt = <1860000>;
279 regulator-min-microvolt = <600000>;
280 regulator-max-microvolt = <1860000>;
284 regulator-min-microvolt = <900000>;
285 regulator-max-microvolt = <3440000>;
289 regulator-min-microvolt = <900000>;
290 regulator-max-microvolt = <3440000>;
294 regulator-min-microvolt = <900000>;
295 regulator-max-microvolt = <3600000>;
299 regulator-min-microvolt = <900000>;
300 regulator-max-microvolt = <3600000>;
304 regulator-min-microvolt = <900000>;
305 regulator-max-microvolt = <3600000>;
309 regulator-min-microvolt = <900000>;
310 regulator-max-microvolt = <3600000>;
314 regulator-min-microvolt = <950000>;
315 regulator-max-microvolt = <3600000>;
319 regulator-min-microvolt = <900000>;
320 regulator-max-microvolt = <3600000>;
324 regulator-min-microvolt = <900000>;
325 regulator-max-microvolt = <3600000>;
326 regulator-always-on;
327 regulator-boot-on;
332 rtc@32 {
334 pinctrl-names = "default";
335 pinctrl-0 = <&pinctrl_rtc>;
337 interrupt-parent = <&gpio4>;
343 pinctrl-names = "default";
344 pinctrl-0 = <&pinctrl_pcie>;
345 reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
346 fsl,tx-swing-full = <103>;
347 fsl,tx-swing-low = <103>;
352 #pwm-cells = <2>;
353 pinctrl-names = "default";
354 pinctrl-0 = <&pinctrl_pwm1>;
359 pinctrl-names = "default";
360 pinctrl-0 = <&pinctrl_pwm2>;
373 pinctrl-names = "default";
374 pinctrl-0 = <&pinctrl_uart3>;
375 uart-has-rtscts;
380 pinctrl-names = "default";
381 pinctrl-0 = <&pinctrl_uart4>;
386 pinctrl-names = "default";
387 pinctrl-0 = <&pinctrl_usbhub>;
388 vbus-supply = <®_usb_h1_vbus>;
389 reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
394 vbus-supply = <®_usb_otg_vbus>;
395 pinctrl-names = "default";
396 pinctrl-0 = <&pinctrl_usbotg>;
397 disable-over-current;
402 pinctrl-names = "default";
403 pinctrl-0 = <&pinctrl_usdhc2>;
404 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
405 no-1-8-v;
406 keep-power-in-suspend;
407 wakeup-source;
412 pinctrl-names = "default";
413 pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
414 bus-width = <8>;
415 vmmc-supply = <&vdd_bperi>;
416 non-removable;
417 keep-power-in-suspend;
422 pinctrl-names = "default";
423 pinctrl-0 = <&pinctrl_wdog>;
424 fsl,ext-reset-output;
428 pinctrl-names = "default";
429 pinctrl-0 = <&pinctrl_hog>;
494 /* GPIO 0-7 */
627 pinctrl_usdhc3_reset: usdhc3grp-reset {