Merge branch 'master' of git://git.denx.de/u-boot-samsung

Merge branch 'master' of git://git.denx.de/u-boot-video

Merge branch 'master' of git://git.denx.de/u-boot-spi

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

Merge git://git.denx.de/u-boot-dm

binman: Rename 'position' to 'offset'

After some thought, I believe there is an unfortunate naming flaw in
binman. Entries have a position and size, but now that we support
hierarchi

binman: Rename 'position' to 'offset'

After some thought, I believe there is an unfortunate naming flaw in
binman. Entries have a position and size, but now that we support
hierarchical sections it is unclear whether a position should be an
absolute position within the image, or a relative position within its
parent section.

At present 'position' actually means the relative position. This indicates
a need for an 'image position' for code that wants to find the location of
an entry without having to do calculations back through parents to
discover this image position.

A better name for the current 'position' or 'pos' is 'offset'. It is not
always an absolute position, but it is always an offset from its parent
offset.

It is unfortunate to rename this concept now, 18 months after binman was
introduced. However I believe it is the right thing to do. The impact is
mostly limited to binman itself and a few changes to in-tree users to
binman:

tegra
sunxi
x86

The change makes old binman definitions (e.g. downstream or out-of-tree)
incompatible if they use the 'pos = <...>' property. Later work will
adjust binman to generate an error when it is used.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

binman: Don't depend on dict order in ELF testOutsideFile()

At present this test assumes that the symbols are returned in address
order. However, objdump can list symbols in any order an

binman: Don't depend on dict order in ELF testOutsideFile()

At present this test assumes that the symbols are returned in address
order. However, objdump can list symbols in any order and dictionaries do
not guarantee any particular order when iterating through item.

Update elf.GetSymbols() to return an OrderedDict, sorted by address, to
avoid any problems.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

Merge branch 'master' of git://git.denx.de/u-boot-ubi

Merge branch 'master' of git://git.denx.de/u-boot-i2c

Merge git://git.denx.de/u-boot-dm

binman: Rename ELF parameters to 'section'

We now pass a Section object to these functions rather than an Image.
Rename the parameters to avoid confusion.

Signed-off-by: Simon G

binman: Rename ELF parameters to 'section'

We now pass a Section object to these functions rather than an Image.
Rename the parameters to avoid confusion.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-sunxi

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borro

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-spi

Merge git://git.denx.de/u-boot-sunxi

Merge git://git.denx.de/u-boot-fsl-qoriq

Merge tag 'xilinx-for-v2018.01-rc2-v2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.01-rc2-v2

fpga:
- Enable loading bitstream via fit image for !xilinx p

Merge tag 'xilinx-for-v2018.01-rc2-v2' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.01-rc2-v2

fpga:
- Enable loading bitstream via fit image for !xilinx platforms

zynq:
- Fix SPL SD boot mode

zynqmp:
- Not not reset in panic
- Do not use simple allocator because of fat changes
- Various dt chagnes
- modeboot variable setup
- Fix fpga loading on automotive devices
- Fix coverity issues

test:
- Fix env test for !hush case - Stephen's patch

show more ...

Merge git://git.denx.de/u-boot-dm

binman: Support accessing binman tables at run time

Binman construct images consisting of multiple binary files. These files
sometimes need to know (at run timme) where their peers are l

binman: Support accessing binman tables at run time

Binman construct images consisting of multiple binary files. These files
sometimes need to know (at run timme) where their peers are located. For
example, SPL may want to know where U-Boot is located in the image, so
that it can jump to U-Boot correctly on boot.

In general the positions where the binaries end up after binman has
finished packing them cannot be known at compile time. One reason for
this is that binman does not know the size of the binaries until
everything is compiled, linked and converted to binaries with objcopy.

To make this work, we add a feature to binman which checks each binary
for symbol names starting with '_binman'. These are then decoded to figure
out which entry and property they refer to. Then binman writes the value
of this symbol into the appropriate binary. With this, the symbol will
have the correct value at run time.

Macros are used to make this easier to use. As an example, this declares
a symbol that will access the 'u-boot-spl' entry to find the 'pos' value
(i.e. the position of SPL in the image):

binman_sym_declare(unsigned long, u_boot_spl, pos);

This converts to a symbol called '_binman_u_boot_spl_prop_pos' in any
binary that includes it. Binman then updates the value in that binary,
ensuring that it can be accessed at runtime with:

ulong u_boot_pos = binman_sym(ulong, u_boot_spl, pos);

This assigns the variable u_boot_pos to the position of SPL in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

binman: Support enabling debug in tests

The elf module can provide some debugging information to assist with
figuring out what is going wrong. This is also useful in tests. Update the

binman: Support enabling debug in tests

The elf module can provide some debugging information to assist with
figuring out what is going wrong. This is also useful in tests. Update the
-D option so that it is passed through to tests as well.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

binman: Add a function to read ELF symbols

In some cases we need to read symbols from U-Boot. At present we have a
a few cases which does this via 'nm' and 'grep'.

It is better

binman: Add a function to read ELF symbols

In some cases we need to read symbols from U-Boot. At present we have a
a few cases which does this via 'nm' and 'grep'.

It is better to use objdump since that tells us the size of the symbols
and also whether it is weak or not.

Add a new module which reads ELF information from files. Update existing
uses of 'nm' to use this module.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...