Merge git://git.denx.de/u-boot-sunxi

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borro

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-spi

Merge git://git.denx.de/u-boot-sunxi

Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.1

Zynq:
- Add support for Syzygy and cc108 boards
- Add support for mini

Merge tag 'xilinx-for-v2018.01' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2018.1

Zynq:
- Add support for Syzygy and cc108 boards
- Add support for mini u-boot configurations (cse)
- dts updates
- config/defconfig updates in connection to Kconfig changes
- Fix psu_init handling

ZynqMP:
- SPL fixes
- Remove slcr.c
- Fixing r5 startup sequence
- Add support for external pmufw
- Add support for new ZynqMP chips
- dts updates
- Add support for zcu102 rev1.0 board

Drivers:
- nand: Support external timing setting and board init
- ahci: Fix wording
- axi_emac: Wait for bit, non processor mode, readl/write conversion
- zynq_gem: Fix SGMII/PCS support

show more ...

ata: Fix ahci wording

s/achi_/ahci_/g

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

EFI Fixes for 2017.09:
- Fix GOP w/o display
- Fix LocateHandle
- Fix exit return value truncation
- Fix

Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

EFI Fixes for 2017.09:
- Fix GOP w/o display
- Fix LocateHandle
- Fix exit return value truncation
- Fix missing EFIAPI in efi_locate_handle (for x86)

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mmc

dm: sata: Update the AHCI uclass to support operations

At present the AHCI uclass is just a shell and we still use the global
functions to access SATA. Fix this by adding operations to t

dm: sata: Update the AHCI uclass to support operations

At present the AHCI uclass is just a shell and we still use the global
functions to access SATA. Fix this by adding operations to the uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://www.denx.de/git/u-boot-imx

Update pfla02 for setenv changes and PHYLIB/etc migration to Kconfig.

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge tag 'xilinx-for-v2017.09' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2017.09

Zynq:
- Add Z-Turn board support

fpga:
- Remove intermediate

Merge tag 'xilinx-for-v2017.09' of git://www.denx.de/git/u-boot-microblaze

Xilinx changes for v2017.09

Zynq:
- Add Z-Turn board support

fpga:
- Remove intermediate buffer from code

Zynqmp:
- dts cleanup
- change psu_init handling
- Add options to get silicon version
- Fix time handling
- Map OCM/TCM via MMU
- Add new clock driver

show more ...

Merge git://git.denx.de/u-boot-fsl-qoriq

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
include/configs/ls1046aqds.h
include/configs/ls1046ardb.h

Merge git://git.denx.de/u-boot-x86

ahci: Support non-PCI controllers

At present the AHCI SCSI driver only supports PCI with driver model.
Rename the existing function to indicate this and add support for adding
a non-

ahci: Support non-PCI controllers

At present the AHCI SCSI driver only supports PCI with driver model.
Rename the existing function to indicate this and add support for adding
a non-PCI controller .

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-dm

dm: ahci: Add a driver for SCSI on AHCI

Some AHCI drivers use SCSI under the hood. Rather than making the AHCI
driver be in the SCSI uclass it makes sense to have the AHCI device create

dm: ahci: Add a driver for SCSI on AHCI

Some AHCI drivers use SCSI under the hood. Rather than making the AHCI
driver be in the SCSI uclass it makes sense to have the AHCI device create
a SCSI device as a child. That way we can handle any AHCI-specific
operations rather than trying to pretend tha the device is just SCSI.

To handle this we need to provide a way for AHCI drivers to bind a SCSI
device as its child, and probe it. Add functions for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

dm: ahci: Drop use of probe_ent

With driver model we cannot have static data or assume that there is only
one device of each time. Adjust the code so that 'probe_ent' is not needed
w

dm: ahci: Drop use of probe_ent

With driver model we cannot have static data or assume that there is only
one device of each time. Adjust the code so that 'probe_ent' is not needed
with driver model. Add a new ahci_init_dm() function which can init AHCI
for driver model without re-allocating the uclass data. Move over the only
existing driver to use this new function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

dm: ahci: Unwind the confusing init code

Two AHCI drivers use SCSI with CONFIG_DM_SCSI. The SCSI uclass calls
scsi_low_level_init() which is implemented by ahci.c. If
CONFIG_SCSI_AHC

dm: ahci: Unwind the confusing init code

Two AHCI drivers use SCSI with CONFIG_DM_SCSI. The SCSI uclass calls
scsi_low_level_init() which is implemented by ahci.c. If
CONFIG_SCSI_AHCI_PLAT is defined it does one thing and if it is not
it does something else.

We don't need to call through scsi_low_level_init() to get the init
completed. Instead, adjust the two drivers to call into AHCI directly.
Drop the post-probe init in the SCSI uclass. This means that driver model
doesn't need to use scsi_low_level_init(). It is a legacy function and
driver model should use a driver's probe() method instead.

While we are here, add a comment to the top of the file explaining what
ahci.c does.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

dm: sata: Move ataid into struct ahci_uc_priv

This array relates to the AHCI controller so should be exist out on its
own in the file. Move it into the structure. Adjust functions that n

dm: sata: Move ataid into struct ahci_uc_priv

This array relates to the AHCI controller so should be exist out on its
own in the file. Move it into the structure. Adjust functions that need
access to this to take the structure as a parameter.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

dm: ahci: Rename struct ahci_probe_ent

This is not a very useful name since once it is probed it still hangs
around. With driver model we will use uclass data for this, so rename the

dm: ahci: Rename struct ahci_probe_ent

This is not a very useful name since once it is probed it still hangs
around. With driver model we will use uclass data for this, so rename the
struct.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

Merge branch 'master' of git://git.denx.de/u-boot-spi

Merge git://git.denx.de/u-boot-mpc85xx

Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze

dm: Add support for scsi/sata based devices

All sata based drivers are bind and corresponding block
device is created. Based on this find_scsi_device() is able
to get back block devi

dm: Add support for scsi/sata based devices

All sata based drivers are bind and corresponding block
device is created. Based on this find_scsi_device() is able
to get back block device based on scsi_curr_dev pointer.

intr_scsi() is commented now but it can be replaced by calling
find_scsi_device() and scsi_scan().

scsi_dev_desc[] is commented out but common/scsi.c heavily depends on
it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol
is reassigned to a block description allocated by uclass.
There is only one block description by device now but it doesn't need to
be correct when more devices are present.

scsi_bind() ensures corresponding block device creation.
uclass post_probe (scsi_post_probe()) is doing low level init.

SCSI/SATA DM based drivers requires to have 64bit base address as
the first entry in platform data structure to setup mmio_base.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...