Merge tag 'dm-9oct18' of git://git.denx.de/u-boot-dm

Test improvements to tidy up output and drop duplicate tests
Sandbox SPL/TPL support
Various dm-related improvements

rtc: Allow use of RTC in SPL and TPL

Add Kconfig options so that the RTC can be used in SPL and TPL. This is
helpful for accessing the contents of CMOS RAM, for example.

Signed-off-by: Simon Glass

rtc: Allow use of RTC in SPL and TPL

Add Kconfig options so that the RTC can be used in SPL and TPL. This is
helpful for accessing the contents of CMOS RAM, for example.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

drivers: rtc: resolve year 2038 problem in rtc_to_tm

Our implementation of rtc_to_tm() cannot handle dates of more than
0x7fffffff seconds after 1970-01-01.

Adopt the Linux kernel implementation.

drivers: rtc: resolve year 2038 problem in rtc_to_tm

Our implementation of rtc_to_tm() cannot handle dates of more than
0x7fffffff seconds after 1970-01-01.

Adopt the Linux kernel implementation.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

show more ...

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-imx

rtc: adding RX8010SJ rtc driver

Add a new driver for RX8010SJ rtc chip. The driver implements both
formats of U-Boot driver model.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Marty

rtc: adding RX8010SJ rtc driver

Add a new driver for RX8010SJ rtc chip. The driver implements both
formats of U-Boot driver model.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

show more ...

Merge git://www.denx.de/git/u-boot-imx

Signed-off-by: Tom Rini <trini@konsulko.com>

rtc: add support for s35392a

Add support for S35392A RTC. The driver supports both U-Boot driver
models.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@coll

rtc: add support for s35392a

Add support for S35392A RTC. The driver supports both U-Boot driver
models.

Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Cc: Heiko Schocher <hs@denx.de>

show more ...

powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is intere

powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

show more ...

powerpc, 8xx: remove support for 8xx

There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so rem

powerpc, 8xx: remove support for 8xx

There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).

Signed-off-by: Heiko Schocher <hs@denx.de>

show more ...

Drop three-wire serial (TWS) support

This subsystem has not been converted to driver model, there is only one
driver and only one board that uses it. Drop it and its CONFIG option.

Also drop the rt

Drop three-wire serial (TWS) support

This subsystem has not been converted to driver model, there is only one
driver and only one board that uses it. Drop it and its CONFIG option.

Also drop the rtc4543 RTC driver since it uses TWS.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

drivers: remove Blackfin specific drivers

These drivers have no user since commit ea3310e8aafa ("Blackfin:
Remove").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simo

drivers: remove Blackfin specific drivers

These drivers have no user since commit ea3310e8aafa ("Blackfin:
Remove").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-dm

rtc: Add RTC chip pcf2127 support

This driver compatible with pcf2127 and pcf2129

Signed-off-by: Meng Yi <meng.yi@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Merge git://git.denx.de/u-boot

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

rtc: Add MCP79411 support to DS1307 rtc driver

The code is from Adrian Cox, and is patterned after similar
support in Linux (drivers/rtc/rtc-ds1307.c:1121-1135). This
chip is used on the Cyrus board

rtc: Add MCP79411 support to DS1307 rtc driver

The code is from Adrian Cox, and is patterned after similar
support in Linux (drivers/rtc/rtc-ds1307.c:1121-1135). This
chip is used on the Cyrus board from Varisys.

Signed-off-by: Andy Fleming <afleming@gmail.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...

Merge git://git.denx.de/u-boot-dm

dm: rtc: sandbox: Enable real-time clock support

Enable real-time-clock support in sandbox.

Signed-off-by: Simon Glass <sjg@chromium.org>

dm: rtc: sandbox: Add a driver for the sandbox I2C RTC

Add a driver which communicates with the sandbox I2C emulation RTC device
and permits it to be used in U-Boot. This driver is very simple - it

dm: rtc: sandbox: Add a driver for the sandbox I2C RTC

Add a driver which communicates with the sandbox I2C emulation RTC device
and permits it to be used in U-Boot. This driver is very simple - it just
reads and writes selected I2C registers in the device.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dm: rtc: sandbox: Add an emulated I2C RTC device

Add a sandbox I2C emulation device which emulates a real-time clock. The
clock works off an offset from the current system time, and supports setting

dm: rtc: sandbox: Add an emulated I2C RTC device

Add a sandbox I2C emulation device which emulates a real-time clock. The
clock works off an offset from the current system time, and supports setting
and getting the clock, as well as access to byte-width regisers in the RTC.
It does not support changing the system time.

This device can be used for testing the 'date' command on sandbox, as well
as the RTC uclass.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

dm: rtc: Add a uclass for real-time clocks

Add a uclass for real-time clocks which support getting the current time,
setting it and resetting the chip to a known-working state. Some RTCs have
additi

dm: rtc: Add a uclass for real-time clocks

Add a uclass for real-time clocks which support getting the current time,
setting it and resetting the chip to a known-working state. Some RTCs have
additional registers which can be used to store settings, so also provide
an interface to these.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

mpc8260: remove atc board support

These boards are still non-generic boards.

drivers/rtc/ds12887.c should also be removed because it can not
be built without CONFIG_ATC.

Signed-off-by: Masahiro Ya

mpc8260: remove atc board support

These boards are still non-generic boards.

drivers/rtc/ds12887.c should also be removed because it can not
be built without CONFIG_ATC.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

show more ...

Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging