Merge branch 'aspeed-dev-v2019.04' into aspeed-master-v2019.04

Merge branch 'ryan_port' into aspeed-dev-v2019.04

add ast2600 pinctrl

Merge tag 'for-master-20190201' of git://git.denx.de/u-boot-rockchip

u-boot-rockchip changes for 2019.04-rc1:
* support for Chromebook Bob
* full pinctrl driver using DTS properties
* document

Merge tag 'for-master-20190201' of git://git.denx.de/u-boot-rockchip

u-boot-rockchip changes for 2019.04-rc1:
* support for Chromebook Bob
* full pinctrl driver using DTS properties
* documentation improvements
* I2S support for some Rockchip SoCs

show more ...

pinctrl: Kconfig: fix missing include of rockchip/Kconfig

After the merge of the new, generic pinctrl-code, the include for
rockchip/Kconfig was missing. Add it here, so we can select the
pinctrl-d

pinctrl: Kconfig: fix missing include of rockchip/Kconfig

After the merge of the new, generic pinctrl-code, the include for
rockchip/Kconfig was missing. Add it here, so we can select the
pinctrl-driver for SPL.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

pinctrl: Kconfig: sort includes alphabetically

To make adding new subdirectories easier, let's enforce alphabetical
ordering of the includes of Kconfig files in the respective
subdirectories.

Signe

pinctrl: Kconfig: sort includes alphabetically

To make adding new subdirectories easier, let's enforce alphabetical
ordering of the includes of Kconfig files in the respective
subdirectories.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

pinctrl: rockchip: Add common rockchip pinctrl driver

Use this driver to fit all Rockchip SOCs and to support
the desired pinctrl configuration via DTS.

Signed-off-by: David Wu <david.wu@rock-chips

pinctrl: rockchip: Add common rockchip pinctrl driver

Use this driver to fit all Rockchip SOCs and to support
the desired pinctrl configuration via DTS.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge branch '2019-01-18-master-imports'

- Bugfix for SPI environment optimization
- Spelling fixes
- Remove some defconfigs per various maintainers
- Minor db410, bananapi r2 fixes
- Bump QEMU to v

Merge branch '2019-01-18-master-imports'

- Bugfix for SPI environment optimization
- Spelling fixes
- Remove some defconfigs per various maintainers
- Minor db410, bananapi r2 fixes
- Bump QEMU to v3.1.0 for most platforms

show more ...

pinctrl: Kconfig: spelling fixes

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

Merge tag 'for-master-20190103' of git://git.denx.de/u-boot-rockchip

Last-minute fixes for 2019.1:
- clamp DRAM size to below 32bit for 32bit targets to support 4GB
- fix copyright notice on some Ro

Merge tag 'for-master-20190103' of git://git.denx.de/u-boot-rockchip

Last-minute fixes for 2019.1:
- clamp DRAM size to below 32bit for 32bit targets to support 4GB
- fix copyright notice on some Rockchip-contributed files
- adjust vdd_log for the RK3399-Q7 to improve stability in some workloads

show more ...

rockchip: rk3399: Add Kconfig option for full pinctrl driver

This patch adds a Kconfig option to enable the full pinctrl driver
for the RK3399. This flag needs to be enabed in order to get the
featu

rockchip: rk3399: Add Kconfig option for full pinctrl driver

This patch adds a Kconfig option to enable the full pinctrl driver
for the RK3399. This flag needs to be enabed in order to get the
features of the full pinctrl driver compiled in (i.e. a .set_state()
callback).

Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge tag 'mips-updates-for-2019.11' of git://git.denx.de/u-boot-mips

- mips: fix some DTC warnings
- bmips: bcm6348: add DMA driver
- bmips: bcm5348: add ethernet driver
- bmips: bcm6368: add ether

Merge tag 'mips-updates-for-2019.11' of git://git.denx.de/u-boot-mips

- mips: fix some DTC warnings
- bmips: bcm6348: add DMA driver
- bmips: bcm5348: add ethernet driver
- bmips: bcm6368: add ethernet driver
- mips: mt76xx: fix DMA problems, disable CONFIG_OF_EMBED
- mips: mscc: add support for Microsemi Ocelot and Luton SoCs
- mips: mscc: add support for Ocelot and Luton evaluation boards
- mips: jz47xx: add basic support for Ingenic JZ4780 SoC
- mips: jz47xx: add support for Imgtec Creator CI20 board

show more ...

pinctrl: mscc: Add gpio and pinctrl driver for MSCC MIPS SoCs (VcoreIII based)

This driver supports the pin and gpio controller found in the Ocelot and
Luton SoCs.

The driver was inspired from the

pinctrl: mscc: Add gpio and pinctrl driver for MSCC MIPS SoCs (VcoreIII based)

This driver supports the pin and gpio controller found in the Ocelot and
Luton SoCs.

The driver was inspired from the pinctrl driver in Linux, but was
simplified and was modified to allow supporting an other SoCs (Luton).

For Ocelot and Luton the controller is the same, only the pins to program
differ.

Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
[changed to only descend into mscc/ dependent on CONFIG_PINCTRL_MSCC]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

show more ...

Merge branch '2018-11-28-master-imports'

- Add MediaTek support

pinctrl: MediaTek: add pinctrl driver for MT7629 SoC

This patch adds pinctrl support for MT7629 SoC. The IO core found on
the SoC has the registers for pinctrl, pinconf and gpio mixed up in
the same

pinctrl: MediaTek: add pinctrl driver for MT7629 SoC

This patch adds pinctrl support for MT7629 SoC. The IO core found on
the SoC has the registers for pinctrl, pinconf and gpio mixed up in
the same register range. Hence the driver also implements the gpio
functionality through UCLASS_GPIO.

This also creates a common file as there might be other chips that use
the same binding and driver, then being a little more abstract could
help in the long run.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

pinctrl: Kconfig: Fix typo

Signed-off-by: Marek Behun <marek.behun@nic.cz>

bcm283x: Add pinctrl driver

The bcm283x family of SoCs have a GPIO controller that also acts as
pinctrl controller.

This patch introduces a new pinctrl driver that can actually properly mux
devices

bcm283x: Add pinctrl driver

The bcm283x family of SoCs have a GPIO controller that also acts as
pinctrl controller.

This patch introduces a new pinctrl driver that can actually properly mux
devices into their device tree defined pin states and is now the primary
owner of the gpio device. The previous GPIO driver gets moved into a
subdevice of the pinctrl driver, bound to the same OF node.

That way whenever a device asks for pinctrl support, it gets it
automatically from the pinctrl driver and GPIO support is still available
in the normal command line phase.

Signed-off-by: Alexander Graf <agraf@suse.de>

show more ...

Merge git://git.denx.de/u-boot-rockchip

rockchip: rk3128: add pinctrl driver

Add rk3128 pinctrl driver and grf/iomux structure definition.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@t

rockchip: rk3128: add pinctrl driver

Add rk3128 pinctrl driver and grf/iomux structure definition.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

pinctrl: rmobile: Add Renesas RCar pincontrol driver

Add PFC pincontrol driver for the Renesas RCar Gen3 R8A7795 and R8A7796
SoCs. This driver uses the PFC pin tables from Linux, thus letting us
sha

pinctrl: rmobile: Add Renesas RCar pincontrol driver

Add PFC pincontrol driver for the Renesas RCar Gen3 R8A7795 and R8A7796
SoCs. This driver uses the PFC pin tables from Linux, thus letting us
share the occassional fixes to those tables. This driver also has a DT
support, so the pinmux is configured from DT instead of the ad-hoc setup
in board file.

This driver is meant to replace the pinmux part of SH_GPIO_PFC driver.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

show more ...

dm: Kconfig: fix typo in help for SPL_PINCTRL

Changes 'controlloers' to 'controllers' in the help-text for
SPL_PINCTRL.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

Merge branch 'master' of git://git.denx.de/u-boot-rockchip

rockchip: rk322x: add pinctrl driver

Add init pinctrl driver support for:
- i2c;
- spi;
- uart;
- pwm;
- emmc/sdmmc;

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsi

rockchip: rk322x: add pinctrl driver

Add init pinctrl driver support for:
- i2c;
- spi;
- uart;
- pwm;
- emmc/sdmmc;

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...

stm32: stm32f7: add spl build support

This commit supports booting from stm32 internal nor flash. spl U-Boot
initializes the sdram memory, copies next image (e.g. standard U-Boot)
to sdram & then ju

stm32: stm32f7: add spl build support

This commit supports booting from stm32 internal nor flash. spl U-Boot
initializes the sdram memory, copies next image (e.g. standard U-Boot)
to sdram & then jumps to entry point.

Here are the flash memory addresses for U-Boot-spl & standard U-Boot:
- spl U-Boot : 0x0800_0000
- standard U-Boot : 0x0800_8000

To compile u-boot without spl: Remove SUPPORT_SPL configuration
(arch/arm/mach-stm32/Kconfig)

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
[trini: Rework Kconfig logic a bit]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...