Merge git://git.denx.de/u-boot-imx

- changes in pico-* boards
- fix imx6ull pinmux

Merge git://git.denx.de/u-boot-marvell

- Multiples updates to the turris boards / platform
- Changes / enhancements to the Marvell PHY drivers, mainly
to support the turris platfor

Merge git://git.denx.de/u-boot-marvell

- Multiples updates to the turris boards / platform
- Changes / enhancements to the Marvell PHY drivers, mainly
to support the turris platform
- Many fixes and enhancements to the pxa3xx NAND driver
- Fixes for the UART boot mode in kwboot
- Misc minor changes to other 32bit and 64bit boards

show more ...

phy: marvell: add SATA comphy RX/TX polarity invert support

This patch adds support to Armada 7k/8k comphy RX/TX lane swap. The
'phy-invert' DT property defines the inverted signals.

phy: marvell: add SATA comphy RX/TX polarity invert support

This patch adds support to Armada 7k/8k comphy RX/TX lane swap. The
'phy-invert' DT property defines the inverted signals.

Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Stefan Roese <sr@denx.de>

show more ...

Merge git://git.denx.de/u-boot-sunxi

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borro

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-dm

Merge git://www.denx.de/git/u-boot-marvell

fix: phy: marvell: cp110: pcie: update analog parameters according to latest ETP

Add PCIE analog parameters initialization values according to
latest ETP.

Signed-off-by: Igal Li

fix: phy: marvell: cp110: pcie: update analog parameters according to latest ETP

Add PCIE analog parameters initialization values according to
latest ETP.

Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

fix: phy: marvell: cp110: sfi: update analog parameters according to latest ETP

Add SFI analog parameters initialization values according to
latest ETP.

Signed-off-by: Igal Libe

fix: phy: marvell: cp110: sfi: update analog parameters according to latest ETP

Add SFI analog parameters initialization values according to
latest ETP.

Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

phy: marvell: cp110: add 5G XFI mode

This patch adds the option to configure a comphy to 5G XFI mode.

In order to configure the comphy to 5G XFI, update
the comphy node in the d

phy: marvell: cp110: add 5G XFI mode

This patch adds the option to configure a comphy to 5G XFI mode.

In order to configure the comphy to 5G XFI, update
the comphy node in the device-tree:
phy2 {
phy-type = <PHY_TYPE_SFI>;
phy-speed = <PHY_SPEED_5_15625G>;
};

Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

fix: phy: marvell: cp110: sata: update analog parameters according to latest ETP

Add SATA analog parameters initialization values according to
latest ETP.

Signed-off-by: Konstan

fix: phy: marvell: cp110: sata: update analog parameters according to latest ETP

Add SATA analog parameters initialization values according to
latest ETP.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Igal Liberman <igall@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-usb

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
include/configs/dra7xx_evm.h

Merge git://www.denx.de/git/u-boot-ppc4xx

Merge branch 'master' of git://git.denx.de/u-boot-tegra

Merge git://www.denx.de/git/u-boot-marvell

drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 7K/8K

This version is based on the Marvell U-Boot version with this patch
applied as latest patch:

Git ID 7f408573:

drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 7K/8K

This version is based on the Marvell U-Boot version with this patch
applied as latest patch:

Git ID 7f408573: "fix: comphy: cp110: add comphy initialization for usb
device mode" from 2016-07-05.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>

show more ...

drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 3k

This version is based on the Marvell U-Boot version with this patch
applied as latest patch:

Git ID 7f408573: "fi

drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 3k

This version is based on the Marvell U-Boot version with this patch
applied as latest patch:

Git ID 7f408573: "fix: comphy: cp110: add comphy initialization for usb
device mode" from 2016-07-05.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Wilson Ding <dingwei@marvell.com>
Cc: Victor Gu <xigu@marvell.com>
Cc: Hua Jing <jinghua@marvell.com>
Cc: Terry Zhou <bjzhou@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
Cc: Haim Boot <hayim@marvell.com>

show more ...