History log of /openbmc/u-boot/drivers/net/phy/Kconfig (Results 1 – 25 of 30)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01
# e87eb270 05-Dec-2019 Johnny Huang <johnny_huang@aspeedtech.com>

Merge branch 'aspeed-dev-v2019.04' into aspeed-master-v2019.04


# 97ebe011 23-Oct-2019 Dylan Hung <dylan_hung@aspeedtech.com>

Merge branch 'feature/rmii' into aspeed-dev-v2019.04


# 9ab23354 15-Oct-2019 Dylan Hung <dylan_hung@aspeedtech.com>

apply ncsi patch


Revision tags: v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04
# f749b618 25-Oct-2018 Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-net


# 4506423a 18-Sep-2018 Jeremy Gebben <jgebben@sweptlaser.com>

net: phy: aquantia: add firmware loading support

Aquantia phys have firmware that can be loaded automatically
from storage directly attached to the phy or via MDIO commands.
Add support for loading

net: phy: aquantia: add firmware loading support

Aquantia phys have firmware that can be loaded automatically
from storage directly attached to the phy or via MDIO commands.
Add support for loading firmware from either a file or a
raw location on an MMC device.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


# 1c650108 18-Sep-2018 Jeremy Gebben <jgebben@sweptlaser.com>

configs: migrate CONFIG_PHY_AQUANTIA to Kconfig

The aquantia driver requires both CONFIG_PHY_GIGE and CONFIG_PHYLIB_10G.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Acked-by: Joe Hershber

configs: migrate CONFIG_PHY_AQUANTIA to Kconfig

The aquantia driver requires both CONFIG_PHY_GIGE and CONFIG_PHYLIB_10G.

Signed-off-by: Jeremy Gebben <jgebben@sweptlaser.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


Revision tags: v2018.07
# df13a443 15-Apr-2018 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-net


# 16879cd2 30-Mar-2018 Joe Hershberger <joe.hershberger@ni.com>

net: phy: Don't limit phy addresses by default

Some boards expect to find more than one phy while other boards are old
and need to be limited to a specific phy address. Only limit the phy
address fo

net: phy: Don't limit phy addresses by default

Some boards expect to find more than one phy while other boards are old
and need to be limited to a specific phy address. Only limit the phy
address for boards that opt in.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

show more ...


# b0af1044 22-Mar-2018 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-net


Revision tags: v2018.03
# 66526e70 14-Feb-2018 kevans@FreeBSD.org <kevans@FreeBSD.org>

net: phy: Add PHY_RTL8211E_PINE64_GIGABIT_FIX for realtek phys

Setting PHY_RTL8211E_PINE64_GIGABIT_FIX forces internal rx/tx delays off
on the PHY, as well as flipping some magical undocumented bits

net: phy: Add PHY_RTL8211E_PINE64_GIGABIT_FIX for realtek phys

Setting PHY_RTL8211E_PINE64_GIGABIT_FIX forces internal rx/tx delays off
on the PHY, as well as flipping some magical undocumented bits. The
magic number comes from the Pine64 engineering team, presumably as a
proxy from Realtek. This configuration fixes the throughput on some
Pine64 models. Packet loss of up to 60-70% has been observed without
this.

Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


# b75643ad 14-Mar-2018 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-sunxi


# b30c4190 02-Feb-2018 Stefan Mavrodiev <stefan@olimex.com>

Move CONFIG_PHY_ADDR to Kconfig

CONFIG_PHY_ADDR is used for old-style configuration. This makes
impossible changing the PHY address, if multiple boards share a same
config header file (for example i

Move CONFIG_PHY_ADDR to Kconfig

CONFIG_PHY_ADDR is used for old-style configuration. This makes
impossible changing the PHY address, if multiple boards share a same
config header file (for example include/configs/sunxi-common.h).

Moving this to Kconfig helps overcoming this issue. It's defined
as entry inside PHYLIB section.

After the implemention, moveconfig was run. The issues are:
- edb9315a - CONFIG_PHYLIB is not enabled. Entry is
deleted.

- ds414 - CONFIG_PHYLIB is in incompatible format:
{ 0x1, 0x0 }. This entry is also deleted.

- devkit3250 - The PHY_ADDR is in hex format (0x1F).
Manually CONFIG_PHY_ADDR=31 is added in
the defconfig.

After the changes the suspicious defconfigs passes building.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[jagan: rebased on master]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

show more ...


# c946b0e9 06-Feb-2018 Michal Simek <michal.simek@xilinx.com>

Kconfig: net: phylib: Phylib should depends on NET

There is no value to enable phylib without networking support.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <jo

Kconfig: net: phylib: Phylib should depends on NET

There is no value to enable phylib without networking support.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


# fdb6c323 15-Jan-2018 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-net


Revision tags: v2018.01
# 137963d7 09-Dec-2017 Florian Fainelli <f.fainelli@gmail.com>

net: phy: Add Broadcom BCM53xx switch driver

Add a minimalistic Broadcom BCM53xx (roboswitch) switch driver similar
to the Marvell MV88E617x. This takes care of configuring the minimum
amount out of

net: phy: Add Broadcom BCM53xx switch driver

Add a minimalistic Broadcom BCM53xx (roboswitch) switch driver similar
to the Marvell MV88E617x. This takes care of configuring the minimum
amount out of the switch hardware such that each user visible port
(configurable) and the CPU port can forward packets between each other
while preserving isolation with other ports.

This is useful for e.g: the Lamobo R1 board featuring a Broadcom
BCM53125 switch.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...


Revision tags: v2017.11
# 8995a96d 18-Oct-2017 Neil Armstrong <narmstrong@baylibre.com>

net: phy: Add Amlogic Meson GXL Internal PHY support

The Amlogic Meson GXL/GXM families embeds an internal RMII Ethernet PHY.

The PHY acts as a generic PHY but needs a slight configuration right
be

net: phy: Add Amlogic Meson GXL Internal PHY support

The Amlogic Meson GXL/GXM families embeds an internal RMII Ethernet PHY.

The PHY acts as a generic PHY but needs a slight configuration right
before it's configuration.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

show more ...


# 6e7adf70 07-Aug-2017 Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-net


# 9a31c739 07-Jul-2017 Alexandru Gagniuc <alex.g@adaptrum.com>

net: phy: Hide Micrel KSZ9021 and KSZ9031 Kconfig options

The correct option is PHY_MICREL_KSZ90X1, but some configs still
select the 9021 and 9031 options, which are deprecated.

Signed-off-by: Ale

net: phy: Hide Micrel KSZ9021 and KSZ9031 Kconfig options

The correct option is PHY_MICREL_KSZ90X1, but some configs still
select the 9021 and 9031 options, which are deprecated.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


# d397f7c4 07-Jul-2017 Alexandru Gagniuc <alex.g@adaptrum.com>

net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers

The KS8721BL and KSZ9021 PHYs are software-incompatible, yet they
share the same ID. Drivers for bothe PHYs cannot safely coexist, so

net: phy: micrel: Separate KSZ9000 drivers from KSZ8000 drivers

The KS8721BL and KSZ9021 PHYs are software-incompatible, yet they
share the same ID. Drivers for bothe PHYs cannot safely coexist, so
the solution was to use #ifdefs to select between the two drivers.

As a result KSZ9031, which has a unique ID, is now caught in the
crossfire. Unless CONFIG_PHY_MICREL_KSZ9031 is defined, the KSZ9031
will not function properly, as some essential configuration code is
ifdef'd-out.

To prevent such situations, move the KSZ9000 drivers to a separate
file, and place them under a separate Kconfig option. While it is
possible to enable both KSZ8000 and KSZ9000 drivers at the same time,
the assumption is that it is highly unlikely for a system to contain
both a KSZ8000 and a KSZ9000 PHY, and that only one of the drivers
will be enabled at any given time.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


# cb543d30 07-Jul-2017 Alexandru Gagniuc <alex.g@adaptrum.com>

net: phy: Remove duplicate Kconfig selection for Micrel KSZ9021

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by:

net: phy: Remove duplicate Kconfig selection for Micrel KSZ9021

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


# 821560fd 27-Jun-2017 Tom Rini <trini@konsulko.com>

Merge git://www.denx.de/git/u-boot-imx

Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
include/configs/imx6qdl_icore_rqs.h
include/configs/imx6ul_geam.h
include/configs/imx6ul_isiot.h


# 5cafcbab 03-Jun-2017 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-net


# 449ea2cd 26-Mar-2017 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable

This change migrate the following configuration options for Kconfig:
* PHY_GIGE, indicates that a controller (with an appropriate PH

net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable

This change migrate the following configuration options for Kconfig:
* PHY_GIGE, indicates that a controller (with an appropriate PHY) is
Gigabit capable and enables extra support in the miiutil for
parsing the status of Gigabit PHYs
* adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs,
which previously had to enabled through a board-specific config file

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>

show more ...


# a43241a4 12-May-2017 Jagan Teki <jagan@amarulasolutions.com>

drivers: net: Kconfig: Add PHY_MICREL_KSZ9021 entry

Add kconfig entry for Micrel KSZ9021 PHY support.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.

drivers: net: Kconfig: Add PHY_MICREL_KSZ9021 entry

Add kconfig entry for Micrel KSZ9021 PHY support.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

show more ...


# 16225590 13-Apr-2017 Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h

Signed-off-by: Tom Rini <trini@konsulko.com>


12