Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01, v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04 |
|
#
97f98308 |
| 19-Feb-2019 |
Tom Rini <trini@konsulko.com> |
Merge branch '2019-02-19-master-imports'
- Convert some OMAP3 platforms to DM+SPL - Various minor fixes - Updates for hikey, DaVinci, am57xx platforms, - Make FAT use less memory
|
#
6dd18bb1 |
| 16-Feb-2019 |
Tom Rini <trini@konsulko.com> |
omap3_beagle: Enable DM_SPI
Switch to DM_SPI support now.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
e0cc7df9 |
| 16-Feb-2019 |
Tom Rini <trini@konsulko.com> |
omap3_beagle: Update for DM SPL support
- Switch to using the omap3-u-boot.dtsi file for needed properties. - Remove a few SPL features to free up more SRAM space. - Switch CONFIG_SYS_TEXT_BASE to t
omap3_beagle: Update for DM SPL support
- Switch to using the omap3-u-boot.dtsi file for needed properties. - Remove a few SPL features to free up more SRAM space. - Switch CONFIG_SYS_TEXT_BASE to the normal default, we don't need to worry about X-Loader at this point anymore. - A few related updates to SPL options as part of switching to DM SPL.
Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
show more ...
|
#
1b0769f2 |
| 02-Feb-2019 |
Tom Rini <trini@konsulko.com> |
Merge branch '2019-02-01-master-imports'
- Various TI platforms have been updated and DTS files re-synced and options disabled if not used or migrated to the DM versions - Improvements to the dump
Merge branch '2019-02-01-master-imports'
- Various TI platforms have been updated and DTS files re-synced and options disabled if not used or migrated to the DM versions - Improvements to the dumpimage tool - Rename SPL FAT/EXT filesystem support symbols for consistency and then allow them to be used to save more space in SPL. - More lmb fixes - Partial migration of CONFIG_BUILD_TARGET
show more ...
|
#
f4b40924 |
| 23-Jan-2019 |
Tien Fong Chee <tien.fong.chee@intel.com> |
spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be us
spl: Kconfig: Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPL_FS_EXT4
Replace CONFIG_SPL_EXT_SUPPORT to CONFIG_SPLY_FS_EXT4 so both obj-$(CONFIG_$(SPL_)FS_EXT4) and CONFIG_IS_ENABLED(FS_EXT4) can be used to control the build in both SPL and U-Boot.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com> Reviewed-by: Tom Rini <trini@konsulko.com>
show more ...
|
#
1bac199e |
| 07-Jan-2019 |
Tom Rini <trini@konsulko.com> |
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
cbabe7f8 |
| 13-Nov-2018 |
Tom Rini <trini@konsulko.com> |
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS
Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had no
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS
Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now.
Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
|
#
4114a261 |
| 13-Nov-2018 |
Tom Rini <trini@konsulko.com> |
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
8c5cad05 |
| 03-Sep-2018 |
Tom Rini <trini@konsulko.com> |
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
cc3fedb2 |
| 06-Aug-2018 |
Adam Ford <aford173@gmail.com> |
Convert CONFIG_TWL4030_LED et al to Kconfig
This converts the following to Kconfig: CONFIG_TWL4030_LED CONFIG_TWL4030_INPUT
This also removes dead references to: CONFIG_TWL4030_KEYPAD
Sig
Convert CONFIG_TWL4030_LED et al to Kconfig
This converts the following to Kconfig: CONFIG_TWL4030_LED CONFIG_TWL4030_INPUT
This also removes dead references to: CONFIG_TWL4030_KEYPAD
Signed-off-by: Adam Ford <aford173@gmail.com>
show more ...
|
#
244eaea6 |
| 02-Aug-2018 |
Adam Ford <aford173@gmail.com> |
Convert CONFIG_VIDEO_OMAP3 to Kconfig
This converts the following to Kconfig: CONFIG_VIDEO_OMAP3
Signed-off-by: Adam Ford <aford173@gmail.com>
|
#
86cf1c82 |
| 16-Aug-2018 |
Tom Rini <trini@konsulko.com> |
configs: Migrate CONFIG_NR_DRAM_BANKS
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANK
configs: Migrate CONFIG_NR_DRAM_BANKS
We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8.
Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
|
#
69ca3439 |
| 18-Jul-2018 |
Guillaume GARDET <guillaume.gardet@free.fr> |
omap3: beagle: re-enable EFI support after the following commit removed it by mistake:
commit d233ccb1d84b901f7e23e6d9b4f2c6a57198b23b ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and
omap3: beagle: re-enable EFI support after the following commit removed it by mistake:
commit d233ccb1d84b901f7e23e6d9b4f2c6a57198b23b ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Derald D. Woods <woods.technical@gmail.com> Cc: Tom Rini <trini@konsulko.com>
show more ...
|
Revision tags: v2018.07 |
|
#
358b6a20 |
| 04-Jun-2018 |
Tom Rini <trini@konsulko.com> |
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
|
#
caa2a2e5 |
| 01-Jun-2018 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://git.denx.de/u-boot-usb
|
#
312a10f1 |
| 29-May-2018 |
Alex Kiernan <alex.kiernan@gmail.com> |
fastboot: Move fastboot to drivers/fastboot
Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to drivers/fastboot.
Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyo
fastboot: Move fastboot to drivers/fastboot
Separate CMD_FASTBOOT from FASTBOOT and move code and configuration to drivers/fastboot.
Switch dependencies on FASTBOOT to USB_FUNCTION_FASTBOOT as anyone who wants FASTBOOT before this series wants USB_FUNCTION_FASTBOOT. Split USB_FUNCTION_FASTBOOT from FASTBOOT so they retain their existing behaviour.
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
show more ...
|
#
f1b1f770 |
| 15-Apr-2018 |
Adam Ford <aford173@gmail.com> |
Convert CONFIG_SPI to Kconfig
This converts the following to Kconfig: CONFIG_SPI
This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SP
Convert CONFIG_SPI to Kconfig
This converts the following to Kconfig: CONFIG_SPI
This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures.
Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
|
#
c9542eae |
| 07-Apr-2018 |
Tom Rini <trini@konsulko.com> |
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
|
Revision tags: v2018.03 |
|
#
6f6b7cfa |
| 06-Mar-2018 |
Tom Rini <trini@konsulko.com> |
Convert all of CONFIG_CONS_INDEX to Kconfig
This converts the following to Kconfig: CONFIG_CONS_INDEX
We have existing entries for this option in a number of places, with different guards on the
Convert all of CONFIG_CONS_INDEX to Kconfig
This converts the following to Kconfig: CONFIG_CONS_INDEX
We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller.
Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
|
#
d233ccb1 |
| 26-Feb-2018 |
Derald D. Woods <woods.technical@gmail.com> |
ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout
This commit does the following for BeagleBoard{-xM}:
- Enable DM_SERIAL which also enables SPL_DM_SERIAL - Misc. config upd
ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout
This commit does the following for BeagleBoard{-xM}:
- Enable DM_SERIAL which also enables SPL_DM_SERIAL - Misc. config updates in support of DM_SERIAL - Use updated NAND layout (BeagleBoard):
device nand0 <omap2-nand.0>, # parts = 6
#: name size offset ------------------------------------------------- 0: spl 0x00080000(512k) 0x00000000 1: u-boot 0x001e0000(1920k) 0x00080000 2: u-boot-env 0x00020000(128k) 0x00260000 3: dtb 0x00020000(128k) 0x00280000 4: kernel 0x00600000(6m) 0x002a0000 5: rootfs 0x0f760000(-) 0x008a0000 -------------------------------------------------
- Use MMC and UBIFS support from config_distro_bootcmd.h - Use LEGACY_MMC and NAND support defined in omap3_beagle.h
[MMC(0:1)/extlinux/extlinux.conf] ---8<------------------------------------------------------------------- default omap3-beagle-mmc-fat label omap3-beagle-mmc-fat kernel /zImage fdt /omap3-beagle.dtb append console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ---8<-------------------------------------------------------------------
[LEGACY_MMC(0:2)/boot/extlinux/extlinux.conf] ---8<------------------------------------------------------------------- default omap3-beagle-mmc-ext4 label omap3-beagle-mmc-ext4 kernel /boot/zImage fdt /boot/omap3-beagle.dtb append console=ttyO2,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ---8<-------------------------------------------------------------------
[UBIFS(ubi0:rootfs)/boot/extlinux/extlinux.conf] ---8<------------------------------------------------------------------- default omap3-beagle-nand-ubifs label omap3-beagle-nand-ubifs kernel /boot/zImage fdt /boot/omap3-beagle.dtb append console=ttyO2,115200n8 root=ubi0:rootfs rw ubi.mtd=rootfs rootfstype=ubifs rootwait ---8<-------------------------------------------------------------------
The board's 'bootcmd' can also be overridden with:
CONFIG_BOOTCOMMAND="run findfdt; run mmcboot" CONFIG_BOOTCOMMAND="run findfdt; run nandboot" CONFIG_BOOTCOMMAND="run findfdt; run ramboot"
or
CONFIG_BOOTCOMMAND="run findfdt; run somethingelse"
The use of 'run findfdt' is required.
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
show more ...
|
#
7c8f00e4 |
| 10-Feb-2018 |
Tom Rini <trini@konsulko.com> |
configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
|
Revision tags: v2018.01 |
|
#
3b9e2a25 |
| 02-Jan-2018 |
Adam Ford <aford173@gmail.com> |
Convert CONFIG_TWL4030_USB to Kconfig
This converts the following to Kconfig: CONFIG_TWL4030_USB
Signed-off-by: Adam Ford <aford173@gmail.com>
|
#
86362221 |
| 29-Dec-2017 |
Adam Ford <aford173@gmail.com> |
Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
This converts the following to Kconfig: CONFIG_USB_MUSB_OMAP2PLUS CONFIG_USB_MUSB_AM35X CONFIG_USB_MUSB_DSPS CONFIG_USB_MUSB_PIO_ONLY
Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
This converts the following to Kconfig: CONFIG_USB_MUSB_OMAP2PLUS CONFIG_USB_MUSB_AM35X CONFIG_USB_MUSB_DSPS CONFIG_USB_MUSB_PIO_ONLY
Signed-off-by: Adam Ford <aford173@gmail.com>
show more ...
|
#
4b37928d |
| 29-Dec-2017 |
Derald D. Woods <woods.technical@gmail.com> |
ARM: dts: omap3-beagle{-xm}: Enable DM and devicetree for BeagleBoard
This commit updates the configuration files needed to support OF_CONTROL on the OMAP3 BeagleBoard(s).
|
Revision tags: v2017.11 |
|
#
b6251db8 |
| 06-Nov-2017 |
Tom Rini <trini@konsulko.com> |
Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND
We first introduce CONFIG_USE_BOOTCOMMAND, similar to CONFIG_USE_BOOTARGS. We then migrate CONFIG_BOOTCOMMAND for most CONFIG_DISTRO_DEFAU
Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND
We first introduce CONFIG_USE_BOOTCOMMAND, similar to CONFIG_USE_BOOTARGS. We then migrate CONFIG_BOOTCOMMAND for most CONFIG_DISTRO_DEFAULT users. In some cases platforms have a complex scheme around this usage, and these have been defered for the moment so that platform maintainers can work on a migration plan.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
show more ...
|