History log of /openbmc/u-boot/board/sunxi/Makefile (Results 1 – 25 of 44)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01, v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04, v2018.07
# 83d290c5 06-May-2018 Tom Rini <trini@konsulko.com>

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So

SPDX: Convert all of our single license tags to Linux Kernel style

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from. So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry. Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents. There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...


Revision tags: v2018.03, v2018.01, v2017.11
# 0b6e5b2c 01-Sep-2017 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-sunxi


# 6ff005cf 31-Aug-2017 Dave Prue <dave@prue.com>

sunxi: Fix CONFIG_SUNXI_GMAC references

SUNXI_GMAC was still used to configure the code where as the
same has been renamed and moved to Kconfig in below commit
"sunxi: Move SUNXI_GMAC to Kconfig"
(s

sunxi: Fix CONFIG_SUNXI_GMAC references

SUNXI_GMAC was still used to configure the code where as the
same has been renamed and moved to Kconfig in below commit
"sunxi: Move SUNXI_GMAC to Kconfig"
(sha1: 4d43d065db3262f9a9918ba72457bf36dfb8e0bb)

Signed-off-by: Dave Prue <dave@prue.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
[Tweek commit message, config_whitelist.txt, build-whitelist.sh]
Signed-off-by: Jagan Teki <jagan@openedev.com>

show more ...


# 5c6631be 01-Aug-2017 Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-mmc


# 74daf94a 04-Jul-2017 Simon Glass <sjg@chromium.org>

dm: sunxi: sata: Don't build sata support into SPL

This is not used in SPL so we do not need to compile it. Make this change
before adding driver-model support to the driver, to avoid build errors.

dm: sunxi: sata: Don't build sata support into SPL

This is not used in SPL so we do not need to compile it. Make this change
before adding driver-model support to the driver, to avoid build errors.
With driver model we define a U_BOOT_DRIVER() which would otherwise be
present in SPL and not be garbage-collected when building.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...


Revision tags: v2016.07, openbmc-20160624-1, v2016.01-rc1, v2015.10, v2015.10-rc5, v2015.10-rc4, v2015.10-rc3, v2015.10-rc2, v2015.10-rc1, v2015.07, v2015.07-rc3, v2015.07-rc2, v2015.07-rc1, v2015.04, v2015.04-rc5, v2015.04-rc4, v2015.04-rc3
# e1cc4d31 24-Feb-2015 Albert ARIBAUD <albert.u.boot@aribaud.net>

Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'


Revision tags: v2015.04-rc2
# e72d3443 13-Feb-2015 Stefano Babic <sbabic@denx.de>

Merge branch 'master' of git://git.denx.de/u-boot


Revision tags: v2015.04-rc1
# be8ddad9 02-Feb-2015 Tom Rini <trini@ti.com>

Merge branch 'master' of git://git.denx.de/u-boot-sunxi


# e1a0888e 25-Jan-2015 Hans de Goede <hdegoede@redhat.com>

sunxi: Convert sun5i boards to use auto dram configuration

Currently we've separate detailed dram settings for all sun5i boards, this
moves them over to using auto dram configuration so that we can

sunxi: Convert sun5i boards to use auto dram configuration

Currently we've separate detailed dram settings for all sun5i boards, this
moves them over to using auto dram configuration so that we can get rid of
all the per board dram_foo.c files.

This has been tested on a A10s-Olinuxino, A13-Olinuxino, A13-OlinuxinoM,
mk802-a10s and r7-tv-dongle board.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...


# 3b95288a 23-Jan-2015 Tom Rini <trini@ti.com>

Merge branch 'master' of http://git.denx.de/u-boot-sunxi


# 389046be 21-Jan-2015 Hans de Goede <hdegoede@redhat.com>

sunxi: Convert sun7i boards to use auto dram configuration

Currently we've separate detailed dram settings for all sun7i boards, this
moves them over to using auto dram configuration so that we can

sunxi: Convert sun7i boards to use auto dram configuration

Currently we've separate detailed dram settings for all sun7i boards, this
moves them over to using auto dram configuration so that we can get rid of
all the per board dram_foo.c files.

This has been tested on a A20-Olinuxino-Lime, A20-Olinuxino_MICRO, Bananapi,
Bananapro, Cubieboard2, Cubietruck, Mele_M3 and a Linksprite_pcDuino3.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...


# 56333be9 21-Jan-2015 Hans de Goede <hdegoede@redhat.com>

sunxi: Drop qt840a_defconfig

The qt840a is one of the many tv-boxes using the "i12" A20 pcb, but it
populates only one of the 2 places for a 16 bit dram ic, thus reducing
the buswidth to 16 bits, an

sunxi: Drop qt840a_defconfig

The qt840a is one of the many tv-boxes using the "i12" A20 pcb, but it
populates only one of the 2 places for a 16 bit dram ic, thus reducing
the buswidth to 16 bits, and the amount of ram to 512M, which is why we
had a separate config for it.

This commit switches the generic i12-tvbox_defconfig over to DRAM
autoconfiguration, so that it will work with the qt840a too, and drops the
qt840a specific config, like we've done with other memory-amount specific
configs before.

Tested on a generic i12-tvbox with 32 bit bus-width / 1G RAM, and on a
qt840a with 16 bit bus-width / 512M RAM.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...


# 6c46c8e8 17-Jan-2015 Hans de Goede <hdegoede@redhat.com>

sunxi: Add mk802_a10s board / defconfig

The mk802_a10s re-uses is the "classic" mk802 case and functionality, but has
an A10s SoC inside rather then the A10, it features 512M or 1G RAM, 4G nand,
a m

sunxi: Add mk802_a10s board / defconfig

The mk802_a10s re-uses is the "classic" mk802 case and functionality, but has
an A10s SoC inside rather then the A10, it features 512M or 1G RAM, 4G nand,
a mini-hdmi female connector, USB-A receptacle, mini-usb receptacle (OTG)
and a sdio realtek wifi chip. Unlike the original mk802 it does have a pmic,
the axp152.

For more details see: http://linux-sunxi.org/Semitime_g2

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...


# 2ddd8012 17-Jan-2015 Hans de Goede <hdegoede@redhat.com>

sunxi: Convert sun4i boards to use auto dram configuration

Currently we've separate detailed dram settings for all sun4i boards, this
moves them over to using auto dram configuration so that we can

sunxi: Convert sun4i boards to use auto dram configuration

Currently we've separate detailed dram settings for all sun4i boards, this
moves them over to using auto dram configuration so that we can get rid of
all the per board dram_foo.c files.

Tested-by: Hans de Goede <hdegoede@redhat.com> on a A10-OLinuXino-Lime,
Chuwi_V7_CW0825 and ba10_tv_box
Tested-by: Zoltan HERPAI <wigyori@uid0.hu> on a pcduino
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...


# 8ffc487c 17-Jan-2015 Hans de Goede <hdegoede@redhat.com>

sunxi: Stop differentiating between 512M and 1G variants of the same board

While working on adding more boards I noticed that we lack a config for
the 512M cubieboard, and that some of the new board

sunxi: Stop differentiating between 512M and 1G variants of the same board

While working on adding more boards I noticed that we lack a config for
the 512M cubieboard, and that some of the new boards which I want to add also
have 512M and 1G variants, rather then adding 2 defconfig's for all of these,
lets switch the exising boards which have both a 512M and 1024M variant over
to the sun4i dram autoconfig code.

This also drops the foo_RAMSIZE_defconfig variants of boards where we currently
have 2 separate configs already.

Note:
1) The newly introduced CONFIG_DRAM_EMR1 kconfig value is not used with
a value other then its default for now, but we need this to be configurable
to support some new boards with auto dram config.

2) We always set all CONFIG_DRAM_foo values in defconfigs, even if they match
the defaults, this is done to make it more clear what values are used for a
certain board.

This has been tested on a Mele A1000, Mini-X and a Cubieboard, all 1G
variants, the dram autoconfig code has also been tested on a 512M mk802
(a defconfig for the mk802 is added in a later patch).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...


Revision tags: v2015.01
# 213dcbfd 05-Jan-2015 Zoltan HERPAI <wigyori@uid0.hu>

sunxi: add Linksprite pcDuino v1/v2 support

Add support for a sun4i board built by Linksprite. This addition covers
both v1 and v2 versions. As the board has been working with 408MHz memory
setting

sunxi: add Linksprite pcDuino v1/v2 support

Add support for a sun4i board built by Linksprite. This addition covers
both v1 and v2 versions. As the board has been working with 408MHz memory
setting in the u-boot-sunxi branch, and has been proven to be running stable
during my tests as well, a respective new DRAM config file is added as well.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...


# 81ec1001 31-Dec-2014 Hans de Goede <hdegoede@redhat.com>

sun7i: Add new Bananapro board / defconfig

Add support for the new Bananapro A20 development board from lemaker.org.
This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
OTG,

sun7i: Add new Bananapro board / defconfig

Add support for the new Bananapro A20 development board from lemaker.org.
This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver,
3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...


Revision tags: v2015.01-rc4
# f4f0df09 27-Dec-2014 Siarhei Siamashka <siarhei.siamashka@gmail.com>

sun7i: Add defconfig for MSI Primo73 tablet

This patch uses the same DRAM settings as in the pre-installed
Android firmware. The LCD display is supported too.

Signed-off-by: Siarhei Siamashka <siar

sun7i: Add defconfig for MSI Primo73 tablet

This patch uses the same DRAM settings as in the pre-installed
Android firmware. The LCD display is supported too.

Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...


Revision tags: v2015.01-rc3, v2015.01-rc2, v2015.01-rc1
# d5325eff 05-Nov-2014 Tom Rini <trini@ti.com>

Merge git://www.denx.de/git/u-boot-sunxi


# d9a20476 24-Oct-2014 Ian Campbell <ijc@hellion.org.uk>

sunxi: kconfig: Introduce CONFIG_TARGET_<BOARD>

This was done automatically with the following bits of scripting.

The Kconfig choice content was generated with this script snippet:
for i in $(g

sunxi: kconfig: Introduce CONFIG_TARGET_<BOARD>

This was done automatically with the following bits of scripting.

The Kconfig choice content was generated with this script snippet:
for i in $(git grep -l CONFIG_ARCH_SUNXI configs/*) ; do
TARGET=$(sed -n -e 's/CONFIG_SYS_EXTRA_OPTIONS="\([^,"]\+\).*/\1/p' $i);
MACH=$(sed -n -e 's/.*CONFIG_\(MACH_SUN.I\)=./\1/p' $i)
echo "config TARGET_$TARGET"
echo " bool \"$TARGET\""
echo " depends on $MACH"
echo
done

defconfigs were updated with a sed script (t):
# Extract board from first entry of CONFIG_SYS_EXTRA_OPTIONS,
/^CONFIG_SYS_EXTRA_OPTIONS/ {
s/^\(CONFIG_SYS_EXTRA_OPTIONS="\)\([^,"]\+\),\?\(.*\)/\1\3\nCONFIG_TARGET_\2=y/;

# Print and delete first line (CONFIG_SYS_EXTRA_OPTIONS), leaving
# CONFIG_TARGET_<BOARD> in pattern space
P;D;
};

# Move CONFIG_TARGET_<BOARD> to hold space
/^CONFIG_TARGET/{h;n}

# Print CONFIG_TARGET_<BOARD> after CONFIG_MACH_<SOC> in either SPL or
# normal mode.
/^CONFIG_MACH/{p;g;p;n};
/^\+S:CONFIG_MACH/{p;g;s/^CONFIG_TARGET/+S:&/;p;n};

# Print any remaining lines normally
p;
Run as:
sed -i -n -f t $(git grep -l CONFIG_ARCH_SUNXI configs/*)
and then manually removing the one instance of CONFIG_SYS_EXTRA_OPTIONS="" from
Colombus_defconfig

board/sunxi/Makefile was updated with:
sed -e 's/^\(obj-\$(CONFIG_\)\(.*\)\().*+= dram_.*\)/\1TARGET_\2\3/g' board/sunxi/Makefile
and manually retabbing a few lines to line up again.

The board descriptions could certainly be improved.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...


# d0796def 26-Oct-2014 Tom Rini <trini@ti.com>

Merge http://git.denx.de/u-boot-sunxi


Revision tags: v2014.10, v2014.10-rc3
# f1fe9752 30-Sep-2014 Hans de Goede <hdegoede@redhat.com>

sunxi: Add support for the Mele M3 board

The Mele M3 is yet another Allwinnner based Android top set box from Mele.

It uses a housing similar to the A2000, but without the USM sata storage slot
at

sunxi: Add support for the Mele M3 board

The Mele M3 is yet another Allwinnner based Android top set box from Mele.

It uses a housing similar to the A2000, but without the USM sata storage slot
at the top.

It features an A20 SoC, 1G RAM, 4G eMMC (unique for Allwinner devices),
100Mbit ethernet, HDMI out, 3 USB A receptacles, VGA, and A/V OUT connections.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...


# d71910fc 28-Sep-2014 Iain Paton <ipaton0@gmail.com>

sun7i: Add support for Olimex A20-OLinuXino-LIME2

This adds support for the Olimex A20-OLinuXino-Lime2
https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2

Differences to previous Lime

sun7i: Add support for Olimex A20-OLinuXino-LIME2

This adds support for the Olimex A20-OLinuXino-Lime2
https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXIno-LIME2

Differences to previous Lime boards are 1GB RAM and gigabit ethernet

Signed-off-by: Iain Paton <ipaton0@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

show more ...


# 114cc429 12-Sep-2014 Tom Rini <trini@ti.com>

Merge branch 'master' of git://git.denx.de/u-boot-arm


# a6bc0195 09-Sep-2014 Albert ARIBAUD <albert.u.boot@aribaud.net>

Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'


12