Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01, v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04, v2018.07 |
|
#
83d290c5 |
| 06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So
SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one.
Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
|
Revision tags: v2018.03, v2018.01, v2017.11, v2016.07, openbmc-20160624-1, v2016.01-rc1, v2015.10, v2015.10-rc5, v2015.10-rc4, v2015.10-rc3, v2015.10-rc2, v2015.10-rc1, v2015.07, v2015.07-rc3, v2015.07-rc2, v2015.07-rc1, v2015.04, v2015.04-rc5, v2015.04-rc4, v2015.04-rc3, v2015.04-rc2, v2015.04-rc1, v2015.01, v2015.01-rc4, v2015.01-rc3, v2015.01-rc2, v2015.01-rc1, v2014.10, v2014.10-rc3, v2014.10-rc2, v2014.10-rc1, v2014.07, v2014.07-rc4, v2014.07-rc3, v2014.07-rc2, v2014.07-rc1, v2014.04, v2014.04-rc3, v2014.04-rc2 |
|
#
1ad6364e |
| 05-Mar-2014 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
#
3e113502 |
| 20-Feb-2014 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts: Makefile drivers/net/npe/Makefile
These two conflicts arise from commit 0b2d3f20 ("ARM: NET: Remove the IXP NPE ethernet driver")
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Conflicts: Makefile drivers/net/npe/Makefile
These two conflicts arise from commit 0b2d3f20 ("ARM: NET: Remove the IXP NPE ethernet driver") and are resolved by deleting the drivers/net/npe/Makefile file and removing the CONFIG_IXP4XX_NPE line from Makefile.
show more ...
|
Revision tags: v2014.04-rc1 |
|
#
7c8278a8 |
| 04-Feb-2014 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
kbuild: add dummy obj-y to create built-in.o
We are going to switch over to Kbuild in upcoming commits.
Each makefile must have non-empty obj- or obj-y to generate built-in.o on Kbuild.
Signed-off
kbuild: add dummy obj-y to create built-in.o
We are going to switch over to Kbuild in upcoming commits.
Each makefile must have non-empty obj- or obj-y to generate built-in.o on Kbuild.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
show more ...
|
#
9e414032 |
| 04-Feb-2014 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
kbuild: change out-of-tree build
This commit changes the working directory where the build process occurs.
Before this commit, build process occurred under the source tree for both in-tree and out-
kbuild: change out-of-tree build
This commit changes the working directory where the build process occurs.
Before this commit, build process occurred under the source tree for both in-tree and out-of-tree build.
That's why we needed to add $(obj) prefix to all generated files in makefiles like follows: $(obj)u-boot.bin: $(obj)u-boot
Here, $(obj) is empty for in-tree build, whereas it points to the output directory for out-of-tree build.
And our old build system changes the current working directory with "make -C <sub-dir>" syntax when descending into the sub-directories.
On the other hand, Kbuild uses a different idea to handle out-of-tree build and directory descending.
The build process of Kbuild always occurs under the output tree. When "O=dir/to/store/output/files" is given, the build system changes the current working directory to that directory and restarts the make.
Kbuild uses "make -f $(srctree)/scripts/Makefile.build obj=<sub-dir>" syntax for descending into sub-directories. (We can write it like "make $(obj)=<sub-dir>" with a shorthand.) This means the current working directory is always the top of the output directory.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Gerhard Sittig <gsi@denx.de>
show more ...
|
#
e183a174 |
| 04-Feb-2014 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
board: samsung: refactor host programs
Some Samsung boards have their own tools under board/samsung/<board>/tools/. This commit refactor more makefiles with "hostprogs-y".
Signed-off-by: Masahiro Y
board: samsung: refactor host programs
Some Samsung boards have their own tools under board/samsung/<board>/tools/. This commit refactor more makefiles with "hostprogs-y".
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
show more ...
|
Revision tags: v2014.01, v2014.01-rc3, v2014.01-rc2, v2014.01-rc1 |
|
#
a79854a9 |
| 20-Oct-2013 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
board: arm: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Andreas Bießmann <andreas.devel@googlemail
board: arm: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Vipin Kumar <vipin.kumar@st.com> Cc: Tom Warren <twarren@nvidia.com> Cc: Tom Rini <trini@ti.com>
show more ...
|
Revision tags: v2013.10, v2013.10-rc4, v2013.10-rc3, v2013.10-rc2, v2013.10-rc1 |
|
#
326ea986 |
| 31-Jul-2013 |
Stefano Babic <sbabic@denx.de> |
Merge git://git.denx.de/u-boot-arm
Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h
Signed-off-by: Stefano Babic <s
Merge git://git.denx.de/u-boot-arm
Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h
Signed-off-by: Stefano Babic <sbabic@denx.de>
show more ...
|
#
8b485ba1 |
| 25-Jul-2013 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot/master' into u-boot-arm/master
|
Revision tags: v2013.07, v2013.07-rc3 |
|
#
1a459660 |
| 08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
|
#
fbbbc86e |
| 12-Jul-2013 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial.
Conflicts: arch/arm/dts/exynos5250.dtsi
Signed-off-by: Tom Rini
Merge branch 'master' of git://git.denx.de/u-boot-arm
Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial.
Conflicts: arch/arm/dts/exynos5250.dtsi
Signed-off-by: Tom Rini <trini@ti.com>
show more ...
|
#
630aacb0 |
| 10-Jul-2013 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'
|
#
643be9c0 |
| 04-Jul-2013 |
Rajeshwari Shinde <rajeshwari.s@samsung.com> |
EXYNOS: Move files from board/samsung to arch/arm
This patch performs the following:
1) Convert the assembly code for memory and clock initialization to C code. 2) Move the memory and clock init co
EXYNOS: Move files from board/samsung to arch/arm
This patch performs the following:
1) Convert the assembly code for memory and clock initialization to C code. 2) Move the memory and clock init codes from board/samsung to arch/arm 3) Creat a common lowlevel_init file across Exynos4 and Exynos5. Converted the common lowlevel_init from assembly to C-code 4) Made spl_boot.c and tzpc_init.c common for both exynos4 and exynos5. 5) Enable CONFIG_SKIP_LOWLEVEL_INIT as stack pointer initialisation is already done in _main. 6) exynos-uboot-spl.lds made common across SMDKV310, Origen and SMDK5250.
TEST: Tested SD-MMC boot on SMDK5250 and Origen. Tested USB and SPI boot on SMDK5250 Compile tested for SMDKV310.
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
show more ...
|
Revision tags: v2013.07-rc2, v2013.07-rc1, v2013.04, v2013.04-rc3, v2013.04-rc2, v2013.04-rc1, v2013.01.01, v2013.01, v2013.01-rc3, v2013.01-rc2, v2013.01-rc1, v2012.10, v2012.10-rc3, v2012.10-rc2, v2012.10-rc1, v2012.07, v2012.07-rc3, v2012.07-rc2, v2012.07-rc1, v2012.04.01, v2012.04, v2012.04-rc3, v2012.04-rc2, v2012.04-rc1, v2011.12, v2011.12-rc3, v2011.12-rc2, v2011.12-rc1 |
|
#
688d8f33 |
| 07-Nov-2011 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: Arm: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board arm: jadecpu: Readd MACH_TYPE_JADECP
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: Arm: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board arm: jadecpu: Readd MACH_TYPE_JADECPU at91: defined mach-types for otc570 board in board config file at91: defined mach-types for meesc board in board config file mx31pdk: Enable D and I caches ehci-mxc: remove incorrect comment README: Fix supported i.MX SoC list for CONFIG_MXC_SPI mx53: Turn off child clocks before reconfigure perclk_root qong: enable support for compressed images imx: imx31_phycore.h: fix checkpatch warnings vision2: Remove unused get_board_rev function mx53smd: Remove unused get_board_rev function mx53ard: Remove unused get_board_rev function mx53evk: Remove unused get_board_rev function mx53evk: Add RTC support mx53loco: Remove unused get_board_rev function mx53evk: Remove unneeded '1' from mx53evk.h OMAP3: mvblx: Initial support for mvBlueLYNX-X ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE omap3: mem: Move comments next to definitions omap3: mem: Clean-up whitespaces omap3: mem: Define and use common macros Davinci: ea20: added PREBOOT to configuration Davinci: ea20: added I2C support Davinci: ea20: added video support VIDEO: davinci: add framebuffer to da8xx ARM: Davinci: added missing registers to hardware.h Davinci: ea20: add gpios for LCD backlight control Davinci: ea20: add gpio for keeping power on in board_late_init Davinci: ea20: Add default U-Boot environment Davinci: ea20: Add early init to get early output from console Davinci: ea20: Add NAND support Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console Davinci: ea20: set console on UART0 arm, davinci: add cam_enc_4xx support arm926ejs, davinci: add missing spi defines for dm365 arm926ejs, davinci: add cpuinfo for dm365 arm, davinci: add lowlevel function for dm365 soc arm, davinci: add header files for dm365 spl, nand: add 4bit HW ecc oob first nand_read_page function arm, davinci: add support for new spl framework spl: add option for adding post memory test to the SPL framework net, davinci_emac: make clock divider in MDIO control register configurable arm, usb, davinci: make USBPHY_CTL register configurable usb, davinci: add enable_vbus() weak function omap3evm: fix errors caused by multiple definitions omap3evm: Add (quick) configuration for NAND only omap3evm: Add (quick) configuration for MMC/SD only omap3evm: move common config options to new file omap3evm: Prepare to split configuration omap3evm: Reorder related config options omap/spl: actually enable the console davinci_emac: compilation fix, phy is array now omap3evm: Set environment variable 'ethaddr' arm, arm926: fix missing symbols in NAND_SPL mode arm, davinci: Add function lpsc_syncreset() arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD arm/km: portl2 environment address update to P1B arm/km: adapt bootcounter evaluation arm/km: enable jffs2 cmds arm/km: trigger reconfiguration for the Xilinx FPGA arm/km: add boardid and hwkey to kernel command line ARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile ARM boards netspace_v2: enable I2C EEPROM support netspace_v2: fix SDRAM configuration armada100: define CONFIG_SYS_CACHELINE_SIZE pantheon: define CONFIG_SYS_CACHELINE_SIZE kirkwood: define CONFIG_SYS_CACHELINE_SIZE kirkwood: drop empty asm-offsets.s file arm/km/mgcoge3un: enhance "waitforne" feature arm/km: add variable waitforne to mgcoge3un gplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared ARM: dreamplug: fix compilation ARM: DockStar: fix compilation ARM: netspace_v2: fix warnings am335x: Drop board_sysinfo struct am335x: Temporarily add MACH_TYPE define misc:pmic:samsung Enable PMIC driver at C210 Universal target dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p UNIVERSAL C210 target dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p GONI target smdkv310: use macro for mmc data read function address smdkv310: use spl framework for mmc spl SMDKV310: use get_ram_size() to validate dram size SMDKV310: Initialize board id using CONFIG_MACH_TYPE ORIGEN : use absolute paths and fix tool naming ORIGEN : enable device tree support MX25: tx25: Fix building due to missing MACH_TYPE mx31: Add board support for HALE TT-01 mx31: add ESD control registers mx31: define pins and init for UART2 and CSPI3 MX35: add support for flea3 board MX51: vision2: add MACH_TYPE in config file vision2: Remove unused header file mx51evk: Remove unused get_board_rev function mx51evk: Remove unneeded '1' from mx51evk.h I2C: Fix mxc_i2c.c problem on imx31_phycore mx35pdk: Add RTC support mx51evk: Use GPIO API for configuring the IOMUX mx51evk: Add RTC support rtc: Make mc13783-rtc driver generic qong: remove unneeded IOMUX settings qong: Use mx31_set_gpr to setup USBH2 pins mx31: Introduce mx31_set_gpr function mx31pdk: Add MC13783 PMIC support qong: remove unneeded "1" from qong.h misc: pmic: fix regression in pmic_fsl.c (SPI) mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME MX35: Drop unnecessary prototypes from imx-regs.h I2C: added I2C-2 and I2C-3 to MX35 MX35: factorize common assembly code MX35: add reset cause as provided by other i.MX MX35: add pins definition for UART3 MX35: added ESDC structure to imx-regs
show more ...
|
Revision tags: v2011.09, v2011.09-rc2 |
|
#
a2ee7f07 |
| 12-Sep-2011 |
Angus Ainslie <angus.ainslie@linaro.org> |
ORIGEN : use absolute paths and fix tool naming
On some hosts using relative paths will cause the build to fail. This patch sets absolute paths for the tools directory
Get rid of MSDOS style excecu
ORIGEN : use absolute paths and fix tool naming
On some hosts using relative paths will cause the build to fail. This patch sets absolute paths for the tools directory
Get rid of MSDOS style excecutable extension
Signed-off-by: Angus Ainslie <angus.ainslie@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
show more ...
|
#
26ddff2d |
| 18-Oct-2011 |
Mike Frysinger <vapier@gentoo.org> |
build: add missing $(AR)->$(cmd_link_o_target) update
Seems people fixed their files to use libfoo.o, but didn't actually update the creation targets to use $(cmd_link_o_target). Update the rest of
build: add missing $(AR)->$(cmd_link_o_target) update
Seems people fixed their files to use libfoo.o, but didn't actually update the creation targets to use $(cmd_link_o_target). Update the rest of the Makefile's found with grep.
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Simon Glass <sjg@chromium.org>
show more ...
|
Revision tags: v2011.09-rc1 |
|
#
6dfbf49c |
| 04-Sep-2011 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: (145 commits) beagleboard: enable HUB power on all variants of the BeagleBoard dm3730: enable dp
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: (145 commits) beagleboard: enable HUB power on all variants of the BeagleBoard dm3730: enable dpll5 ehci-hcd: Allow cleanups to happen gracefully on a timeout. OMAP3: Add DSS driver for OMAP3 led: Remove state-saving of led for toggle functionality and add toggle option to led command led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all' led: correct off/on locations in structure led: added cmd_led to Makefile BeagleBoard: fix LED 0/1 in driver Corrected LED name match finding avoiding extraneous Usage printouts BeagleBoard: config: updated default configuration BeagleBoard: config: Enabled multibus support for I2C in configuration BeagleBoard: config: add optargs/buddy/camera BeagleBoard: config: increase command-line functionality BeagleBoard: config: make mtest run BeagleBoard: config: enable DSS BeagleBoard: config: enable asix driver and dhcp BeagleBoard: config: enable networking BeagleBoard: config: decrease bootdelay to 2 seconds BeagleBoard: config: use uImage.beagle for tftp BeagleBoard: config: hardcode MAC for onboard SMSC BeagleBoard: config: load kernel from MMC ext, not FAT BeagleBoard: Configure DVI/S-video BeagleBoard: Added userbutton command BeagleBoard: turn off clocks in ehci_stop USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor beagleboard: add support for xM revision C beagle: pass expansionboard name in bootargs OMAP: Remove omapfb.debug=y from Beagle and Overo env settings OMAP3 Beagle Pin Mux initialization glitch fix da850: modifications for Logic PD Rev.3 AM18xx EVM da850: fix the channel number for EMAC teardown init da850: add support for Spectrum Digital AM18xx EVM da850: add support to wake up DSP during board init da850: modify the U-Boot prompt string da850: add NOR boot mode support da8xx: add support for multiple PLL controllers da850: indicate cache usage disable in config file dm365: modify boot prompt from dm365 to dm36x dm365: disable cache usage due to coherency issues dm6446: disable cache usage due to coherency issues OMAP3: Remove legacy mmc driver devkit8000: Use generic MMC driver TI OMAP3 SDP3430: Use generic MMC driver AM3517 CraneBoard: Use generic MMC driver OMAP3: pandora: Use generic MMC driver OMAP3: Zoom2: Use generic MMC driver OMAP3: Zoom1: Use generic MMC driver OMAP3: DIG297: Use generic MMC driver OMAP3: CM-T35: Use generic MMC driver am3517evm: Use generic MMC driver omap3evm: Use generic MMC driver omap3:clock: check cpu_family before enabling clks for IVA & CAM omap3:clock: configure GFX clock to 200MHz for AM/DM37x OMAP3/4: Increase console I/O buffer size PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE PXA: Fix CSB226, fix monitor length PXA: Fix Lubbock, remove redundant parenthesis armv7: cache: remove flush on un-aligned invalidate armv7: stronger barrier for cache-maintenance operations omap: enable caches at system start-up arm: do not force d-cache enable on all boards ORIGEN: Add MMC SPL support ARMV7: Add support for Samsung ORIGEN board i2c:gpio:s5p: Enable I2C GPIO on the GONI target i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c) Tegra2: Use clock and pinmux functions to simplify code Tegra2: Add additional pin multiplexing features Tegra2: Add more clock support Tegra2: Add microsecond timer function ARM: remove broken "at91rm9200dk" board ARM: remove broken "m501sk" board ARM: remove broken "kb9202" board ARM: remove broken "csb637" board ARM: remove broken "cmc_pu2" board ARM: remove broken "at91cap9adk" board ARM: remove broken "voiceblue" board ARM: remove broken "smdk2400" board ARM: remove broken "sbc2410x" board ARM: remove broken "netstar" board ARM: remove broken "mx1fs2" board ARM: remove broken "lpd7a40x" boards ARM: remove broken "edb93xx" boards ARM: remove broken "B2" board ARM: remove broken "armadillo" board ARM: remove broken "assabet" board ARM: versatile: drop warnings IMX: scb9328: drop warnings MX31: imx31_litekit: make use of GPIO framework MX31: mx31ads: make use of GPIO framework MX5: mx51evk: make use of GPIO framework MX35: mx35pdk: make use of GPIO framework MX5: mx53loco: make use of GPIO framework MX5: mx53evk: make use of GPIO framework MX5: vision2: make use of GPIO framework MX5: mx53smd: make use of GPIO framework MX5: mx53ard: make use of GPIO framework MX25: zmx25: make use of GPIO framework MX5: efikamx: make use of GPIO framework MX31: QONG: make use of GPIO framework MX35: make use of GPIO framework for MX35 processor MX5: make use of GPIO framework for MX5 processor MX31: make use of GPIO framework for MX31 processor MX25: make use of GPIO framework for MX25 processor IMX: uniform GPIO interface using GPIO framework MX: MX35 / MX5: uniform clock command with powerpc MX35: MX35PDK: support additional RAM on CSD1 mx53: ddr3: Update DD3 initialization ARM: MX51: PLL errata workaround ARM: versatilepb : drop warnings due to double definitions omap4: increase SRAM budget to fix build error omap4: fix build warning due to signed unsigned comparison mkimage: Fix 'Unknown OMAP image type - 5' omap: fix gpio related build breaks gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal) SMDKV310: MMC SPL: Remove unwanted dummy functions SMDKV310: Fix undefined reference error SMDKV310: Fix build error for smdkv310 board gpio:samsung s5p_ suffix add for GPIO functions mmc: S5P: Support DMA restarts at buffer boundaries SMDKV310: Fix host compilation of mkv310_image arm: fix bd pointer dereference prior initialization arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF MX31: removed warnings due to clock.h integrator: convert to new build system integratorcp: make the board compile integratorap: remove hardcoded 32MB memory cmdline ...
show more ...
|
#
98a48c5d |
| 18-Aug-2011 |
Chander Kashyap <chander.kashyap@linaro.org> |
ORIGEN: Add MMC SPL support
Adds mmc boot support.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
#
b9a1ef21 |
| 18-Aug-2011 |
Chander Kashyap <chander.kashyap@linaro.org> |
ARMV7: Add support for Samsung ORIGEN board
Origen board is based upon S5PV310 SoC which is similiar to S5PC210 SoC.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minky
ARMV7: Add support for Samsung ORIGEN board
Origen board is based upon S5PV310 SoC which is similiar to S5PC210 SoC.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
show more ...
|