Revision tags: v00.04.15, v00.04.14, v00.04.13, v00.04.12, v00.04.11, v00.04.10, v00.04.09, v00.04.08, v00.04.07, v00.04.06, v00.04.05, v00.04.04, v00.04.03, v00.04.02, v00.04.01, v00.04.00, v2021.04, v00.03.03, v2021.01, v2020.10, v2020.07, v00.02.13, v2020.04, v2020.01, v2019.10, v00.02.05, v00.02.04, v00.02.03, v00.02.02, v00.02.01, v2019.07, v00.02.00, v2019.04, v2018.07 |
|
#
83d290c5 |
| 06-May-2018 |
Tom Rini <trini@konsulko.com> |
SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So
SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us.
In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style.
This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one.
Signed-off-by: Tom Rini <trini@konsulko.com>
show more ...
|
Revision tags: v2018.03, v2018.01, v2017.11, v2016.07, openbmc-20160624-1, v2016.01-rc1, v2015.10, v2015.10-rc5, v2015.10-rc4, v2015.10-rc3, v2015.10-rc2, v2015.10-rc1, v2015.07, v2015.07-rc3, v2015.07-rc2, v2015.07-rc1, v2015.04, v2015.04-rc5, v2015.04-rc4, v2015.04-rc3 |
|
#
e1cc4d31 |
| 24-Feb-2015 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'
|
Revision tags: v2015.04-rc2 |
|
#
e72d3443 |
| 13-Feb-2015 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot
|
#
a4fb5df2 |
| 09-Feb-2015 |
Tom Rini <trini@ti.com> |
Merge branch 'microblaze' of git://git.denx.de/u-boot-microblaze
|
Revision tags: v2015.04-rc1, v2015.01, v2015.01-rc4, v2015.01-rc3, v2015.01-rc2, v2015.01-rc1, v2014.10, v2014.10-rc3, v2014.10-rc2, v2014.10-rc1, v2014.07, v2014.07-rc4, v2014.07-rc3, v2014.07-rc2, v2014.07-rc1 |
|
#
e945f6dc |
| 08-May-2014 |
Michal Simek <michal.simek@xilinx.com> |
microblaze: Move architecture to use generic board init
Compile code with -fPIC to get GOT. Do not build SPL with fPIC because it increasing SPL size for nothing.
Signed-off-by: Michal Simek <micha
microblaze: Move architecture to use generic board init
Compile code with -fPIC to get GOT. Do not build SPL with fPIC because it increasing SPL size for nothing.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
show more ...
|
Revision tags: v2014.04, v2014.04-rc3, v2014.04-rc2, v2014.04-rc1, v2014.01, v2014.01-rc3, v2014.01-rc2, v2014.01-rc1 |
|
#
a71a36f6 |
| 20-Oct-2013 |
Masahiro Yamada <yamada.m@jp.panasonic.com> |
microblaze: convert makefiles to Kbuild style
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Michal Simek <michal.simek@xilinx.com>
|
Revision tags: v2013.10, v2013.10-rc4, v2013.10-rc3, v2013.10-rc2, v2013.10-rc1 |
|
#
326ea986 |
| 31-Jul-2013 |
Stefano Babic <sbabic@denx.de> |
Merge git://git.denx.de/u-boot-arm
Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h
Signed-off-by: Stefano Babic <s
Merge git://git.denx.de/u-boot-arm
Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h
Signed-off-by: Stefano Babic <sbabic@denx.de>
show more ...
|
#
8b485ba1 |
| 25-Jul-2013 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge branch 'u-boot/master' into u-boot-arm/master
|
Revision tags: v2013.07, v2013.07-rc3 |
|
#
1a459660 |
| 08-Jul-2013 |
Wolfgang Denk <wd@denx.de> |
Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
|
Revision tags: v2013.07-rc2 |
|
#
b8eee435 |
| 26-Jun-2013 |
Dirk Eibach <eibach@gdsys.de> |
Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
MAKEALL is fine for ppc4xx and mpc85xx. Run checks were done on our controlcenterd hardware.
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys
Build arch/$ARCH/lib/bootm.o depending on CONFIG_CMD_BOOTM
MAKEALL is fine for ppc4xx and mpc85xx. Run checks were done on our controlcenterd hardware.
Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Andy Fleming <afleming@freescale.com>
show more ...
|
Revision tags: v2013.07-rc1, v2013.04, v2013.04-rc3, v2013.04-rc2, v2013.04-rc1 |
|
#
9cd9b34d |
| 23-Feb-2013 |
Stefano Babic <sbabic@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
#
9a32084e |
| 04-Feb-2013 |
Kim Phillips <kim.phillips@freescale.com> |
Merge branch 'master' of git://git.denx.de/u-boot
|
#
2d795c96 |
| 04-Feb-2013 |
Tom Rini <trini@ti.com> |
Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze
|
Revision tags: v2013.01.01, v2013.01, v2013.01-rc3, v2013.01-rc2 |
|
#
2281ba51 |
| 06-Nov-2012 |
David Holsgrove <david.holsgrove@xilinx.com> |
microblaze: Add muldi3.c which contains routines for _muldi3
Referenced arch/blackfin/lib/muldi3.c and the linux kernel. Resolves issue seen when building u-boot for HW_MUL=0;
PLATFORM_CPPFLAGS +=
microblaze: Add muldi3.c which contains routines for _muldi3
Referenced arch/blackfin/lib/muldi3.c and the linux kernel. Resolves issue seen when building u-boot for HW_MUL=0;
PLATFORM_CPPFLAGS += -mxl-soft-mul PLATFORM_CPPFLAGS += -mno-xl-multiply-high
which resulted in error while linking to libgcc.a without mul hw (bs / m);
libgcc.a(_muldi3.o): In function `__muldi3': .... src/gcc-4.6.2/libgcc/libgcc2.c:550: undefined reference to `_GLOBAL_OFFSET_TABLE_'
This link failure would not occur if we used gcc instead of ld directly, as gcc will correctly use the crt's to resolve this link.
Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
show more ...
|
Revision tags: v2013.01-rc1, v2012.10, v2012.10-rc3, v2012.10-rc2, v2012.10-rc1 |
|
#
d978780b |
| 31-Jul-2012 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-microblaze
* 'master' of git://git.denx.de/u-boot-microblaze: microblaze: Wire up SPI driver spi: microblaze: Adds driver for Xilinx SPI control
Merge branch 'master' of git://git.denx.de/u-boot-microblaze
* 'master' of git://git.denx.de/u-boot-microblaze: microblaze: Wire up SPI driver spi: microblaze: Adds driver for Xilinx SPI controller microblaze: intc: Clear interrupt code microblaze: Call serial multi initialization microblaze: Move __udelay implementation microblaze: Remove extern from board.c microblaze: Wire up dts configuration fdt: Add board specific dts inclusion microblaze: Move individual board linker scripts to common script in cpu tree. microblaze: Add gpio.h microblaze: Add missing undefs for UBI and UBIFS microblaze: Expand and correct configuration comments microblaze: Enable ubi support microblaze: Avoid compile error on systems without cfi flash microblaze: Remove wrong define CONFIG_SYS_FLASH_PROTECTION
Conflicts: drivers/spi/Makefile
Signed-off-by: Wolfgang Denk <wd@denx.de>
show more ...
|
Revision tags: v2012.07, v2012.07-rc3, v2012.07-rc2, v2012.07-rc1 |
|
#
779bf42c |
| 29-Jun-2012 |
Michal Simek <monstr@monstr.eu> |
microblaze: Move __udelay implementation
Move __udelay to the timer code because of unification. And clean coding style because of checkpatch.pl.
Signed-off-by: Michal Simek <monstr@monstr.eu> Acke
microblaze: Move __udelay implementation
Move __udelay to the timer code because of unification. And clean coding style because of checkpatch.pl.
Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org>
show more ...
|
Revision tags: v2012.04.01, v2012.04, v2012.04-rc3, v2012.04-rc2, v2012.04-rc1, v2011.12, v2011.12-rc3, v2011.12-rc2, v2011.12-rc1, v2011.09, v2011.09-rc2, v2011.09-rc1, v2011.06, v2011.06-rc3, v2011.06-rc2, v2011.06-rc1, v2011.03, v2011.03-rc2, v2011.03-rc1, v2010.12, v2010.12-rc3, v2010.12-rc2 |
|
#
6d8962e8 |
| 05-Nov-2010 |
Sebastien Carlier <sebastien.carlier@gmail.com> |
Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. A
Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols found in archive libraries when linking with recent versions of binutils. As stated in the System V ABI, "the link editor does not extract archive members to resolve undefined weak symbols".
This commit changes all Makefiles to use partial linking (ld -r) instead of creating library archives, which forces all symbols to participate in linking, allowing non-weak symbols to override weak symbols as intended. This approach is also used by Linux, from which the gmake function cmd_link_o_target (defined in config.mk and used in all Makefiles) is inspired.
The name of each former library archive is preserved except for extensions which change from ".a" to ".o". This commit updates references accordingly where needed, in particular in some linker scripts.
This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
show more ...
|
Revision tags: v2010.12-rc1, v2010.09, v2010.09-rc2, v2010.09-rc1, v2010.06, v2010.06-rc3, v2010.06-rc2, v2010.06-rc1 |
|
#
9d62f20d |
| 10-May-2010 |
Minkyu Kang <mk7.kang@samsung.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts: arch/arm/include/asm/mach-types.h common/serial.c
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
#
500fbae2 |
| 24-Apr-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-microblaze
|
#
83653121 |
| 18-Apr-2010 |
Minkyu Kang <mk7.kang@samsung.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts: cpu/arm1176/cpu.c cpu/arm1176/start.S cpu/arm_cortexa8/s5pc1xx/Makefile cpu/arm_cortexa8/s5pc1xx/clock.c drivers/serial/serial_s
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts: cpu/arm1176/cpu.c cpu/arm1176/start.S cpu/arm_cortexa8/s5pc1xx/Makefile cpu/arm_cortexa8/s5pc1xx/clock.c drivers/serial/serial_s5p.c include/asm-arm/arch-s5pc1xx/clk.h include/asm-arm/arch-s5pc1xx/gpio.h include/asm-arm/arch-s5pc1xx/uart.h
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
show more ...
|
#
8ff972c6 |
| 16-Apr-2010 |
Michal Simek <monstr@monstr.eu> |
microblaze: Consolidate cache code
Merge cpu and lib cache code. Flush cache before disabling.
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
#
ea0364f1 |
| 12-Apr-2010 |
Peter Tyser <ptyser@xes-inc.com> |
Move lib_$ARCH directories to arch/$ARCH/lib
Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk
This change is intended to clean up the top-level directory structure and more closely mimic Linux
Move lib_$ARCH directories to arch/$ARCH/lib
Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk
This change is intended to clean up the top-level directory structure and more closely mimic Linux's directory organization.
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
show more ...
|