arm: keystone: Move cmd_ddr3 to a common place

Move cmd_ddr3 to cmd/ti in order to make
it build for non-keystone TI platforms.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[trini: Rename to dd

arm: keystone: Move cmd_ddr3 to a common place

Move cmd_ddr3 to cmd/ti in order to make
it build for non-keystone TI platforms.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[trini: Rename to ddr3.c not cmd_ddr3.c]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

keystone2: Move target selection to Kconfig

The config option TARGET_K2x_EVM is set by the k2x defconfigs to pick
a board target, but the header configs also set K2x_EVM. This config
is redundant, r

keystone2: Move target selection to Kconfig

The config option TARGET_K2x_EVM is set by the k2x defconfigs to pick
a board target, but the header configs also set K2x_EVM. This config
is redundant, remove it and use TARGET_K2x_EVM everywhere in its place.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

show more ...

ARM: keystone2: Only link cmd_ddr3.o on non-SPL builds

When we switch to including all linker lists in SPL it is important
to not include commands as that may lead to link errors due to other
things

ARM: keystone2: Only link cmd_ddr3.o on non-SPL builds

When we switch to including all linker lists in SPL it is important
to not include commands as that may lead to link errors due to other
things we have already discarded. In this case simply move cmd_ddr3.o
over to the list with the rest.

Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

ARM: keystone2: Switch to using the poweroff command

Now that we have a standard way to power off the hardware, switch to
using that rather than our own command.

Cc: Vitaly Andrianov <vitalya@ti.co

ARM: keystone2: Switch to using the poweroff command

Now that we have a standard way to power off the hardware, switch to
using that rather than our own command.

Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

ARM: keystone2: Split monitor code / command code

When we switch to including all linker lists in SPL it is important
to not include commands as that may lead to link errors due to other
things we h

ARM: keystone2: Split monitor code / command code

When we switch to including all linker lists in SPL it is important
to not include commands as that may lead to link errors due to other
things we have already discarded. In this case, we split the code for
supporting the monitor out from the code for loading it.

Cc: Vitaly Andrianov <vitalya@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

ARM: keystone2: use SPD info to configure K2HK and K2E DDR3

This commit replaces hard-coded EMIF and PHY DDR3 configurations for
predefined SODIMMs to a calculated configuration. The SODIMM paramete

ARM: keystone2: use SPD info to configure K2HK and K2E DDR3

This commit replaces hard-coded EMIF and PHY DDR3 configurations for
predefined SODIMMs to a calculated configuration. The SODIMM parameters
are read from SODIMM's SPD and used to calculated the configuration.

The current commit supports calculation for DDR3 with 1600MHz and 1333MHz
only.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

ARM: keystone2: Use common definition for clk_get_rate

Since all the clocks are defined common, and has the same logic to get
the frequencies, use a common definition for for clk_get_rate().

Review

ARM: keystone2: Use common definition for clk_get_rate

Since all the clocks are defined common, and has the same logic to get
the frequencies, use a common definition for for clk_get_rate().

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

ARM: keystone: move SoC sources to mach-keystone

Move
arch/arm/cpu/armv7/keystone/* -> arch/arm/mach-keystone/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>