Revision tags: v9.1.0 |
|
#
effd60c8 |
| 18-Jan-2024 |
Stefan Hajnoczi <stefanha@redhat.com> |
monitor: only run coroutine commands in qemu_aio_context
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not polled during nested event loops. The coroutine currently reschedule
monitor: only run coroutine commands in qemu_aio_context
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not polled during nested event loops. The coroutine currently reschedules itself in the main loop's qemu_aio_context AioContext, which is polled during nested event loops. One known problem is that QMP device-add calls drain_call_rcu(), which temporarily drops the BQL, leading to all sorts of havoc like other vCPU threads re-entering device emulation code while another vCPU thread is waiting in device emulation code with aio_poll().
Paolo Bonzini suggested running non-coroutine QMP handlers in the iohandler AioContext. This avoids trouble with nested event loops. His original idea was to move coroutine rescheduling to monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch() because we don't know if the QMP handler needs to run in coroutine context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have been nicer since it's associated with the monitor implementation and not as general as qmp_dispatch(), which is also used by qemu-ga.
A number of qemu-iotests need updated .out files because the order of QMP events vs QMP responses has changed.
Solves Issue #1933.
Cc: qemu-stable@nongnu.org Fixes: 7bed89958bfbf40df9ca681cefbdca63abdde39d ("device_core: use drain_call_rcu in in qmp_device_add") Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985 Buglink: https://issues.redhat.com/browse/RHEL-17369 Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-ID: <20240118144823.1497953-4-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Fiona Ebner <f.ebner@proxmox.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
show more ...
|
#
f389309d |
| 18-Jan-2024 |
Stefan Hajnoczi <stefanha@redhat.com> |
monitor: only run coroutine commands in qemu_aio_context
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not polled during nested event loops. The coroutine currently reschedule
monitor: only run coroutine commands in qemu_aio_context
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not polled during nested event loops. The coroutine currently reschedules itself in the main loop's qemu_aio_context AioContext, which is polled during nested event loops. One known problem is that QMP device-add calls drain_call_rcu(), which temporarily drops the BQL, leading to all sorts of havoc like other vCPU threads re-entering device emulation code while another vCPU thread is waiting in device emulation code with aio_poll().
Paolo Bonzini suggested running non-coroutine QMP handlers in the iohandler AioContext. This avoids trouble with nested event loops. His original idea was to move coroutine rescheduling to monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch() because we don't know if the QMP handler needs to run in coroutine context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have been nicer since it's associated with the monitor implementation and not as general as qmp_dispatch(), which is also used by qemu-ga.
A number of qemu-iotests need updated .out files because the order of QMP events vs QMP responses has changed.
Solves Issue #1933.
Cc: qemu-stable@nongnu.org Fixes: 7bed89958bfbf40df9ca681cefbdca63abdde39d ("device_core: use drain_call_rcu in in qmp_device_add") Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985 Buglink: https://issues.redhat.com/browse/RHEL-17369 Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-ID: <20240118144823.1497953-4-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Fiona Ebner <f.ebner@proxmox.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit effd60c878176bcaf97fa7ce2b12d04bb8ead6f7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
show more ...
|
Revision tags: v8.0.0 |
|
#
27e0d8b5 |
| 27-Feb-2023 |
Hanna Czenczek <hreitz@redhat.com> |
iotests/308: Add test for 'write -zu'
Try writing zeroes to a FUSE export while allowing the area to be unmapped; block/file-posix.c generally implements writing zeroes with BDRV_REQ_MAY_UNMAP ('wri
iotests/308: Add test for 'write -zu'
Try writing zeroes to a FUSE export while allowing the area to be unmapped; block/file-posix.c generally implements writing zeroes with BDRV_REQ_MAY_UNMAP ('write -zu') by calling fallocate(PUNCH_HOLE). This used to lead to a blk_pdiscard() in the FUSE export, which may or may not lead to the area being zeroed. HEAD^ fixed this to use blk_pwrite_zeroes() instead (again with BDRV_REQ_MAY_UNMAP), so verify that running `qemu-io 'write -zu'` on a FUSE exports always results in zeroes being written.
Signed-off-by: Hanna Czenczek <hreitz@redhat.com> Message-Id: <20230227104725.33511-3-hreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
show more ...
|
Revision tags: v7.2.0 |
|
#
74163add |
| 20-Jun-2022 |
Hanna Reitz <hreitz@redhat.com> |
iotests/106, 214, 308: Read only one size line
These tests read size information (sometimes disk size, sometimes virtual size) from qemu-img info's output. Once qemu-img starts printing info about
iotests/106, 214, 308: Read only one size line
These tests read size information (sometimes disk size, sometimes virtual size) from qemu-img info's output. Once qemu-img starts printing info about child nodes, we are going to see multiple instances of that per image, but these tests are only interested in the first one, so use "head -n 1" to get it.
Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220620162704.80987-11-hreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
show more ...
|
Revision tags: v7.0.0 |
|
#
e2eec281 |
| 03-Jan-2022 |
Hanna Reitz <hreitz@redhat.com> |
iotests/308: Fix for CAP_DAC_OVERRIDE
With CAP_DAC_OVERRIDE (which e.g. root generally has), permission checks will be bypassed when opening files.
308 in one instance tries to open a read-only fil
iotests/308: Fix for CAP_DAC_OVERRIDE
With CAP_DAC_OVERRIDE (which e.g. root generally has), permission checks will be bypassed when opening files.
308 in one instance tries to open a read-only file (FUSE export) with qemu-io as read/write, and expects this to fail. However, when running it as root, opening will succeed (thanks to CAP_DAC_OVERRIDE) and only the actual write operation will fail.
Note this as "Case not run", but have the test pass in either case.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Fixes: 2c7dd057aa7bd7a875e9b1a53975c220d6380bc4 ("export/fuse: Pass default_permissions for mount") Signed-off-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220103120014.13061-1-hreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
show more ...
|
Revision tags: v6.2.0 |
|
#
ea29331b |
| 20-Oct-2021 |
Markus Armbruster <armbru@redhat.com> |
qapi: Improve input_type_enum()'s error message
The error message claims the parameter is invalid:
$ qemu-system-x86_64 -object qom-type=nonexistent qemu-system-x86_64: -object qom-type=non
qapi: Improve input_type_enum()'s error message
The error message claims the parameter is invalid:
$ qemu-system-x86_64 -object qom-type=nonexistent qemu-system-x86_64: -object qom-type=nonexistent: Invalid parameter 'nonexistent'
What's wrong is actually the *value* 'nonexistent'. Improve the message to
qemu-system-x86_64: -object qom-type=nonexistent: Parameter 'qom-type' does not accept value 'nonexistent'
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/608 Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20211020180231.434071-1-armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
show more ...
|
Revision tags: v6.1.0 |
|
#
57e28d34 |
| 12-Jul-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' into staging s390x updates: - add gen16 cpumodels - refactor/cleanup some code - bugfixes # gpg:
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' into staging s390x updates: - add gen16 cpumodels - refactor/cleanup some code - bugfixes # gpg: Signature made Thu 08 Jul 2021 12:26:21 BST # gpg: using EDDSA key 69A3B536F5CBFC65208026C1DE88BB5641DE66C1 # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF # Subkey fingerprint: 69A3 B536 F5CB FC65 2080 26C1 DE88 BB56 41DE 66C1 * remotes/cohuck-gitlab/tags/s390x-20210708: target/s390x: split sysemu part of cpu models target/s390x: move kvm files into kvm/ target/s390x: remove kvm-stub.c target/s390x: use kvm_enabled() to wrap call to kvm_s390_get_hpage_1m target/s390x: make helper.c sysemu-only target/s390x: split cpu-dump from helper.c target/s390x: move sysemu-only code out to cpu-sysemu.c target/s390x: start moving TCG-only code to tcg/ target/s390x: rename internal.h to s390x-internal.h target/s390x: remove tcg-stub.c hw/s390x: only build tod-tcg from the CONFIG_TCG build hw/s390x: tod: make explicit checks for accelerators when initializing hw/s390x: rename tod-qemu.c to tod-tcg.c target/s390x: meson: add target_user_arch s390x/tcg: Fix m5 vs. m4 field for VECTOR MULTIPLY SUM LOGICAL target/s390x: Fix CC set by CONVERT TO FIXED/LOGICAL s390x/cpumodel: add 3931 and 3932 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
bd38ae26 |
| 12-Jul-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging Add translator_use_goto_tb. Cleanups in prep of breakpoint fixes. Misc fixes. # gpg: Si
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging Add translator_use_goto_tb. Cleanups in prep of breakpoint fixes. Misc fixes. # gpg: Signature made Sat 10 Jul 2021 16:29:14 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth-gitlab/tags/pull-tcg-20210710: (41 commits) cpu: Add breakpoint tracepoints tcg: Remove TCG_TARGET_HAS_goto_ptr accel/tcg: Log tb->cflags with -d exec accel/tcg: Split out log_cpu_exec accel/tcg: Move tb_lookup to cpu-exec.c accel/tcg: Move helper_lookup_tb_ptr to cpu-exec.c target/i386: Use cpu_breakpoint_test in breakpoint_handler tcg: Fix prologue disassembly target/xtensa: Use translator_use_goto_tb target/tricore: Use tcg_gen_lookup_and_goto_ptr target/tricore: Use translator_use_goto_tb target/sparc: Use translator_use_goto_tb target/sh4: Use translator_use_goto_tb target/s390x: Remove use_exit_tb target/s390x: Use translator_use_goto_tb target/rx: Use translator_use_goto_tb target/riscv: Use translator_use_goto_tb target/ppc: Use translator_use_goto_tb target/openrisc: Use translator_use_goto_tb target/nios2: Use translator_use_goto_tb ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
d1987c81 |
| 11-Jul-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging * More SVM fixes (Lara) * Module annotation database (Gerd) * Memory leak fixes (myself) * Bu
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging * More SVM fixes (Lara) * Module annotation database (Gerd) * Memory leak fixes (myself) * Build fixes (myself) * --with-devices-* support (Alex) # gpg: Signature made Fri 09 Jul 2021 17:23:52 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (48 commits) meson: Use input/output for entitlements target configure: allow the selection of alternate config in the build configs: rename default-configs to configs and reorganise hw/arm: move CONFIG_V7M out of default-devices hw/arm: add dependency on OR_IRQ for XLNX_VERSAL meson: Introduce target-specific Kconfig meson: switch function tests from compilation to linking vl: fix leak of qdict_crumple return value target/i386: fix exceptions for MOV to DR target/i386: Added DR6 and DR7 consistency checks target/i386: Added MSRPM and IOPM size check monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically usb: build usb-host as module monitor/usb: register 'info usbhost' dynamically usb: drop usb_host_dev_is_scsi_storage hook monitor: allow register hmp commands accel: build tcg modular accel: add tcg module annotations accel: build qtest modular accel: add qtest module annotations ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
86108e23 |
| 11-Jul-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Trivial patches pull request 20210709 # gpg: Signature made Fri 09 Jul 2021 21:2
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging Trivial patches pull request 20210709 # gpg: Signature made Fri 09 Jul 2021 21:26:52 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.1-pull-request: util/guest-random: Fix size arg to tail memcpy migration: fix typo in mig_throttle_guest_down comment target/xtensa/xtensa-semi: Fix compilation problem on Haiku hw/virtio: Document *_should_notify() are called within rcu_read_lock() misc: Remove redundant new line in perror() virtiofsd: Add missing newline in error message misc: Fix "havn't" typo memory: Display MemoryRegion name in read/write ops trace events qemu-option: Drop dead assertion Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
9516034d |
| 11-Jul-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging Some qemu updates for IPMI and I2C Move some ADC file to where they belong and move some sensors to
Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging Some qemu updates for IPMI and I2C Move some ADC file to where they belong and move some sensors to a sensor directory, since with new BMCs coming in lots of different sensors should be coming in. Keep from cluttering things up. Add support for I2C PMBus devices. Replace the confusing and error-prone i2c_send_recv and i2c_transfer with specific send and receive functions. Several errors have already been made with these, avoid any new errors. Fix the watchdog_expired field in the IPMI watchdog, it's not a bool, it's a u8. After a vmstate transfer, the new value could be wrong. # gpg: Signature made Fri 09 Jul 2021 17:25:04 BST # gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81 # gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown] # gpg: aka "Corey Minyard <minyard@acm.org>" [unknown] # gpg: aka "Corey Minyard <corey@minyard.net>" [unknown] # gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81 * remotes/cminyard/tags/for-qemu-6.1-2: (24 commits) tests/qtest: add tests for MAX34451 device model hw/misc: add MAX34451 device tests/qtest: add tests for ADM1272 device model hw/misc: add ADM1272 device hw/i2c: add support for PMBus ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct hw/i2c: Introduce i2c_start_recv() and i2c_start_send() hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer() hw/i2c: Make i2c_start_transfer() direction argument a boolean hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address() hw/i2c: Remove confusing i2c_send_recv() hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/misc/auxbus: Replace 'is_write' boolean by its value hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases hw/misc/auxbus: Fix MOT/classic I2C mode hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/i2c/ppc4xx_i2c: Add reference to datasheet hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send() hw/display/sm501: Simplify sm501_i2c_write() logic hw/input/lm832x: Define TYPE_LM8323 in public header ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
3cfcc329 |
| 11-Jul-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210709' into staging target-arm queue: * New machine type: stm32vldiscovery * hw/intc/arm_gicv3_cpuif: Fix vir
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210709' into staging target-arm queue: * New machine type: stm32vldiscovery * hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write * hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers * virt: Fix implementation of GPIO-based powerdown/shutdown mechanism * Correct the encoding of MDCCSR_EL0 and DBGDSCRint * hw/intc: Improve formatting of MEMTX_ERROR guest error message # gpg: Signature made Fri 09 Jul 2021 17:09:10 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210709: hw/intc: Improve formatting of MEMTX_ERROR guest error message target/arm: Correct the encoding of MDCCSR_EL0 and DBGDSCRint hw/arm/stellaris: Expand comment about handling of OLED chipselect hw/gpio/pl061: Document a shortcoming in our implementation hw/gpio/pl061: Convert to 3-phase reset and assert GPIO lines correctly on reset hw/arm/virt: Make PL061 GPIO lines pulled low, not high hw/gpio/pl061: Make pullup/pulldown of outputs configurable hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers hw/gpio/pl061: Document the interface of this device hw/gpio/pl061: Add tracepoints for register read and write hw/gpio/pl061: Clean up read/write offset handling logic hw/gpio/pl061: Convert DPRINTF to tracepoints hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write tests/boot-serial-test: Add STM32VLDISCOVERY board testcase docs/system: arm: Add stm32 boards description stm32vldiscovery: Add the STM32VLDISCOVERY Machine stm32f100: Add the stm32f100 SoC Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
42e1d798 |
| 10-Jul-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging Block layer patches - Make blockdev-reopen stable - Remove deprecated qemu-img backing file without f
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging Block layer patches - Make blockdev-reopen stable - Remove deprecated qemu-img backing file without format - rbd: Convert to coroutines and add write zeroes support - rbd: Updated MAINTAINERS - export/fuse: Allow other users access to the export - vhost-user: Fix backends without multiqueue support - Fix drive-backup transaction endless drained section # gpg: Signature made Fri 09 Jul 2021 13:49:22 BST # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (28 commits) block: Make blockdev-reopen stable API iotests: Test reopening multiple devices at the same time block: Support multiple reopening with x-blockdev-reopen block: Acquire AioContexts during bdrv_reopen_multiple() block: Add bdrv_reopen_queue_free() qcow2: Fix dangling pointer after reopen for 'file' qemu-img: Improve error for rebase without backing format qemu-img: Require -F with -b backing image qcow2: Prohibit backing file changes in 'qemu-img amend' blockdev: fix drive-backup transaction endless drained section vhost-user: Fix backends without multiqueue support MAINTAINERS: add block/rbd.c reviewer block/rbd: fix type of task->complete iotests/fuse-allow-other: Test allow-other iotests/308: Test +w on read-only FUSE exports export/fuse: Let permissions be adjustable export/fuse: Give SET_ATTR_SIZE its own branch export/fuse: Add allow-other option export/fuse: Pass default_permissions for mount util/uri: do not check argument of uri_free() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
f29add26 |
| 25-Jun-2021 |
Max Reitz <mreitz@redhat.com> |
iotests/308: Test +w on read-only FUSE exports Test that +w on read-only FUSE exports returns an EROFS error. u+x on the other hand should work. (There is no special reason to choose u
iotests/308: Test +w on read-only FUSE exports Test that +w on read-only FUSE exports returns an EROFS error. u+x on the other hand should work. (There is no special reason to choose u+x here, it simply is like +w another flag that is not set by default.) Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210625142317.271673-6-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
show more ...
|
#
8fc54f94 |
| 25-Jun-2021 |
Max Reitz <mreitz@redhat.com> |
export/fuse: Add allow-other option Without the allow_other mount option, no user (not even root) but the one who started qemu/the storage daemon can access the export. Allow users
export/fuse: Add allow-other option Without the allow_other mount option, no user (not even root) but the one who started qemu/the storage daemon can access the export. Allow users to configure the export such that such accesses are possible. While allow_other is probably what users want, we cannot make it an unconditional default, because passing it is only possible (for non-root users) if the global fuse.conf configuration file allows it. Thus, the default is an 'auto' mode, in which we first try with allow_other, and then fall back to without. FuseExport.allow_other reports whether allow_other was actually used as a mount option or not. Currently, this information is not used, but a future patch will let this field decide whether e.g. an export's UID and GID can be changed through chmod. One notable thing about 'auto' mode is that libfuse may print error messages directly to stderr, and so may fusermount (which it executes). Our export code cannot really filter or hide them. Therefore, if 'auto' fails its first attempt and has to fall back, fusermount will print an error message that mounting with allow_other failed. This behavior necessitates a change to iotest 308, namely we need to filter out this error message (because if the first attempt at mounting with allow_other succeeds, there will be no such message). Furthermore, common.rc's _make_test_img should use allow-other=off for FUSE exports, because iotests generally do not need to access images from other users, so allow-other=on or allow-other=auto have no advantage. OTOH, allow-other=on will not work on systems where user_allow_other is disabled, and with allow-other=auto, we get said error message that we would need to filter out again. Just disabling allow-other is simplest. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210625142317.271673-3-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
show more ...
|
#
2c7dd057 |
| 25-Jun-2021 |
Max Reitz <mreitz@redhat.com> |
export/fuse: Pass default_permissions for mount We do not do any permission checks in fuse_open(), so let the kernel do them. We already let fuse_getattr() report the proper UNIX permis
export/fuse: Pass default_permissions for mount We do not do any permission checks in fuse_open(), so let the kernel do them. We already let fuse_getattr() report the proper UNIX permissions, so this should work the way we want. This causes a change in 308's reference output, because now opening a non-writable export with O_RDWR fails already, instead of only actually attempting to write to it. (That is an improvement.) Signed-off-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210625142317.271673-2-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
show more ...
|
#
0e324626 |
| 22-Jan-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-6.0-pull-request' into staging linux-user pull request 20210119-v3 Remove obsolete F_SHLCK and F_EXLCK translation
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-6.0-pull-request' into staging linux-user pull request 20210119-v3 Remove obsolete F_SHLCK and F_EXLCK translation Update sockopt Add F_ADD_SEALS and F_GET_SEALS # gpg: Signature made Thu 21 Jan 2021 12:33:04 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/linux-user-for-6.0-pull-request: linux-user: Remove obsolete F_SHLCK and F_EXLCK translation linux-user: Add IPv6 options to do_print_sockopt() linux-user: add missing IPv6 get/setsockopt option linux-user: add missing UDP get/setsockopt option linux-user: Support F_ADD_SEALS and F_GET_SEALS fcntls Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
a957d25d |
| 21-Jan-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210121' into staging s390x updates: - headers update to Linux 5.11-rc2 - fix tcg emulation for some instructions that
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210121' into staging s390x updates: - headers update to Linux 5.11-rc2 - fix tcg emulation for some instructions that are generated by clang Linux kernel builds - vfio-ccw: wire up the device unplug notification mechanism - fix a gcc 11 warning # gpg: Signature made Thu 21 Jan 2021 12:08:12 GMT # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck-gitlab/tags/s390x-20210121: s390x: Use strpadcpy for copying vm name vfio-ccw: Connect the device request notifier Update linux headers to 5.11-rc2 update-linux-headers: Include const.h s390x/tcg: Ignore register content if b1/b2 is zero when handling EXECUTE tests/tcg/s390x: Fix EXRL tests s390x/tcg: Don't ignore content in r0 when not specified via "b" or "x" s390x/tcg: Fix RISBHG s390x/tcg: Fix ALGSI Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
fef80ea0 |
| 21-Jan-2021 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-01-20' into staging nbd patches for 2021-01-20 - minor resource leak fixes in qemu-nbd - ensure proper aio context
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-01-20' into staging nbd patches for 2021-01-20 - minor resource leak fixes in qemu-nbd - ensure proper aio context when nbd server uses iothreads - iotest refactorings in preparation for rewriting ./check to be more flexible, and preparing for more nbd server reconnect features # gpg: Signature made Thu 21 Jan 2021 02:28:19 GMT # gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full] # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full] # gpg: aka "[jpeg image of size 6874]" [full] # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2021-01-20: iotests.py: qemu_io(): reuse qemu_tool_pipe_and_status() iotests.py: fix qemu_tool_pipe_and_status() iotests/264: fix style iotests: define group in each iotest iotests/294: add shebang line iotests: make tests executable iotests: fix some whitespaces in test output files iotests/303: use dot slash for qcow2.py running iotests/277: use dot slash for nbd-fault-injector.py running nbd/server: Quiesce coroutines on context switch block: Honor blk_set_aio_context() context requirements qemu-nbd: Fix a memleak in nbd_client_thread() qemu-nbd: Fix a memleak in qemu_nbd_client_list() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
#
9dd003a9 |
| 16-Jan-2021 |
Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> |
iotests: define group in each iotest We are going to drop group file. Define group in tests as a preparatory step. The patch is generated by cd tests/qemu-iotests
iotests: define group in each iotest We are going to drop group file. Define group in tests as a preparatory step. The patch is generated by cd tests/qemu-iotests grep '^[0-9]\{3\} ' group | while read line; do file=$(awk '{print $1}' <<< "$line"); groups=$(sed -e 's/^... //' <<< "$line"); awk "NR==2{print \"# group: $groups\"}1" $file > tmp; cat tmp > $file; done Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
show more ...
|
#
ad717e6d |
| 11-Dec-2020 |
Peter Maydell <peter.maydell@linaro.org> |
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging Block layer patches: - Support for FUSE exports - Fix deadlock in bdrv_co_yield_to_drain() - Use
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging Block layer patches: - Support for FUSE exports - Fix deadlock in bdrv_co_yield_to_drain() - Use lock guard macros - Some preparational patches for 64 bit block layer - file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes() # gpg: Signature made Fri 11 Dec 2020 17:06:19 GMT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (34 commits) block: Fix deadlock in bdrv_co_yield_to_drain() block: Fix locking in qmp_block_resize() block: Simplify qmp_block_resize() error paths block: introduce BDRV_MAX_LENGTH block/io: bdrv_check_byte_request(): drop bdrv_is_inserted() block/io: bdrv_refresh_limits(): use ERRP_GUARD block/file-posix: fix workaround in raw_do_pwrite_zeroes() can-host: Fix crash when 'canbus' property is not set iotests/221: Discard image before qemu-img map file-posix: check the use_lock before setting the file lock iotests/308: Add test for FUSE exports iotests: Enable fuse for many tests iotests: Allow testing FUSE exports iotests: Give access to the qemu-storage-daemon storage-daemon: Call bdrv_close_all() on exit iotests/287: Clean up subshell test image iotests: Let _make_test_img guess $TEST_IMG_FILE iotests: Restrict some Python tests to file iotests/091: Use _cleanup_qemu instad of "wait" iotests: Derive image names from $TEST_IMG ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
show more ...
|
Revision tags: v5.2.0 |
|
#
e6c79647 |
| 27-Oct-2020 |
Max Reitz <mreitz@redhat.com> |
iotests/308: Add test for FUSE exports We have good coverage of the normal I/O paths now, but what remains is a test that tests some more special cases: Exporting an image on itself
iotests/308: Add test for FUSE exports We have good coverage of the normal I/O paths now, but what remains is a test that tests some more special cases: Exporting an image on itself (thus turning a formatted image into a raw one), some error cases, and non-writable and non-growable exports. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201027190600.192171-21-mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
show more ...
|