Merge remote-tracking branch 'remotes/hreitz-gitlab/tags/pull-block-2022-02-01' into staging

Block patches:
- Add support to the iotests to test qcow2's zstd compression mode
- Fix post-migration bl

Merge remote-tracking branch 'remotes/hreitz-gitlab/tags/pull-block-2022-02-01' into staging

Block patches:
- Add support to the iotests to test qcow2's zstd compression mode
- Fix post-migration block node permissions
- iotests fixes (051 and mirror-ready-cancel-error)
- Remove an outdated comment

# gpg: Signature made Tue 01 Feb 2022 13:34:54 GMT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF

* remotes/hreitz-gitlab/tags/pull-block-2022-02-01: (24 commits)
block.h: remove outdated comment
iotests/migration-permissions: New test
block-backend: Retain permissions after migration
iotests: declare lack of support for compresion_type in IMGOPTS
iotest 214: explicit compression type
iotests 60: more accurate set dirty bit in qcow2 header
iotests: bash tests: filter compression type
iotest 39: use _qcow2_dump_header
iotests: massive use _qcow2_dump_header
iotests/common.rc: introduce _qcow2_dump_header helper
qcow2: simple case support for downgrading of qcow2 images with zstd
iotest 302: use img_info_log() helper
iotests.py: filter compression type out
iotests.py: filter out successful output of qemu-img create
iotest 065: explicit compression type
iotest 303: explicit compression type
iotests.py: rewrite default luks support in qemu_img
iotests: drop qemu_img_verbose() helper
iotests.py: qemu_img*("create"): support IMGOPTS='compression_type=zstd'
iotests: specify some unsupported_imgopts for python iotests
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: declare lack of support for compresion_type in IMGOPTS

compression_type can't be used if we want to create image with
compat=0.10. So, skip these tests, not many of them.

Signed-off-by: Vl

iotests: declare lack of support for compresion_type in IMGOPTS

compression_type can't be used if we want to create image with
compat=0.10. So, skip these tests, not many of them.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211223160144.1097696-20-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-01-20' into staging

nbd patches for 2021-01-20

- minor resource leak fixes in qemu-nbd
- ensure proper aio context when nbd server use

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-01-20' into staging

nbd patches for 2021-01-20

- minor resource leak fixes in qemu-nbd
- ensure proper aio context when nbd server uses iothreads
- iotest refactorings in preparation for rewriting ./check to be more
flexible, and preparing for more nbd server reconnect features

# gpg: Signature made Thu 21 Jan 2021 02:28:19 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2021-01-20:
iotests.py: qemu_io(): reuse qemu_tool_pipe_and_status()
iotests.py: fix qemu_tool_pipe_and_status()
iotests/264: fix style
iotests: define group in each iotest
iotests/294: add shebang line
iotests: make tests executable
iotests: fix some whitespaces in test output files
iotests/303: use dot slash for qcow2.py running
iotests/277: use dot slash for nbd-fault-injector.py running
nbd/server: Quiesce coroutines on context switch
block: Honor blk_set_aio_context() context requirements
qemu-nbd: Fix a memleak in nbd_client_thread()
qemu-nbd: Fix a memleak in qemu_nbd_client_list()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: define group in each iotest

We are going to drop group file. Define group in tests as a preparatory
step.

The patch is generated by

cd tests/qemu-iotests

grep '^[0-9]\{3\} ' grou

iotests: define group in each iotest

We are going to drop group file. Define group in tests as a preparatory
step.

The patch is generated by

cd tests/qemu-iotests

grep '^[0-9]\{3\} ' group | while read line; do
file=$(awk '{print $1}' <<< "$line");
groups=$(sed -e 's/^... //' <<< "$line");
awk "NR==2{print \"# group: $groups\"}1" $file > tmp;
cat tmp > $file;
done

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210116134424.82867-7-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()

# gpg: Signature made Fri 11 Dec 2020 17:06:19 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (34 commits)
block: Fix deadlock in bdrv_co_yield_to_drain()
block: Fix locking in qmp_block_resize()
block: Simplify qmp_block_resize() error paths
block: introduce BDRV_MAX_LENGTH
block/io: bdrv_check_byte_request(): drop bdrv_is_inserted()
block/io: bdrv_refresh_limits(): use ERRP_GUARD
block/file-posix: fix workaround in raw_do_pwrite_zeroes()
can-host: Fix crash when 'canbus' property is not set
iotests/221: Discard image before qemu-img map
file-posix: check the use_lock before setting the file lock
iotests/308: Add test for FUSE exports
iotests: Enable fuse for many tests
iotests: Allow testing FUSE exports
iotests: Give access to the qemu-storage-daemon
storage-daemon: Call bdrv_close_all() on exit
iotests/287: Clean up subshell test image
iotests: Let _make_test_img guess $TEST_IMG_FILE
iotests: Restrict some Python tests to file
iotests/091: Use _cleanup_qemu instad of "wait"
iotests: Derive image names from $TEST_IMG
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: Enable fuse for many tests

Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to. Note that this is no
attempt at being definitel

iotests: Enable fuse for many tests

Many tests (that do not support generic protocols) can run just fine
with FUSE-exported images, so allow them to. Note that this is no
attempt at being definitely complete. There are some tests that might
be modified to run on FUSE, but this patch still skips them. This patch
only tries to pick the rather low-hanging fruits.

Note that 221 and 250 only pass when .lseek is correctly implemented,
which is only possible with a libfuse that is 3.8 or newer.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201027190600.192171-20-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Mitigate file fragmentation with extent size hints
- Tighten qemu-img rules on missing

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- file-posix: Mitigate file fragmentation with extent size hints
- Tighten qemu-img rules on missing backing format
- qemu-img map: Don't limit block status request size
- Fix crash with virtio-scsi and iothreads

# gpg: Signature made Tue 14 Jul 2020 14:24:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
block: Avoid stale pointer dereference in blk_get_aio_context()
qemu-img: Deprecate use of -b without -F
block: Add support to warn on backing file change without format
iotests: Specify explicit backing format where sensible
qcow2: Deprecate use of qemu-img amend to change backing file
block: Error if backing file fails during creation without -u
qcow: Tolerate backing_fmt=
vmdk: Add trivial backing_fmt support
sheepdog: Add trivial backing_fmt support
block: Finish deprecation of 'qemu-img convert -n -o'
qemu-img: Flush stdout before before potential stderr messages
file-posix: Mitigate file fragmentation with extent size hints
iotests/059: Filter out disk size with more standard filter
qemu-img map: Don't limit block status request size
iotests: Simplify _filter_img_create() a bit

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

iotests: Specify explicit backing format where sensible

There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become

iotests: Specify explicit backing format where sensible

There are many existing qcow2 images that specify a backing file but
no format. This has been the source of CVEs in the past, but has
become more prominent of a problem now that libvirt has switched to
-blockdev. With older -drive, at least the probing was always done by
qemu (so the only risk of a changed format between successive boots of
a guest was if qemu was upgraded and probed differently). But with
newer -blockdev, libvirt must specify a format; if libvirt guesses raw
where the image was formatted, this results in data corruption visible
to the guest; conversely, if libvirt guesses qcow2 where qemu was
using raw, this can result in potential security holes, so modern
libvirt instead refuses to use images without explicit backing format.

The change in libvirt to reject images without explicit backing format
has pointed out that a number of tools have been far too reliant on
probing in the past. It's time to set a better example in our own
iotests of properly setting this parameter.

iotest calls to create, rebase, and convert are all impacted to some
degree. It's a bit annoying that we are inconsistent on command line
- while all of those accept -o backing_file=...,backing_fmt=..., the
shortcuts are different: create and rebase have -b and -F, while
convert has -B but no -F. (amend has no shortcuts, but the previous
patch just deprecated the use of amend to change backing chains).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200706203954.341758-9-eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-04-07' into staging

Block patches for 5.0-rc2:
- Fix double QLIST_REMOVE() and potential request object leak in
xen-block
- Prev

Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-04-07' into staging

Block patches for 5.0-rc2:
- Fix double QLIST_REMOVE() and potential request object leak in
xen-block
- Prevent a potential assertion failure in qcow2's code for compressed
clusters by rejecting invalid (unaligned) requests with -EIO
- Prevent discards on qcow2 v2 images from making backing data reappear
- Make qemu-img convert report I/O error locations by byte offsets
consistently
- Fix for potential I/O test errors (accidental globbing due to missing
quotes)

# gpg: Signature made Tue 07 Apr 2020 13:30:01 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40

* remotes/maxreitz/tags/pull-block-2020-04-07:
xen-block: Fix double qlist remove and request leak
iotests/common.pattern: Quote echos
qcow2: Check request size in qcow2_co_pwritev_compressed_part()
qemu-img: Report convert errors by bytes, not sectors
qcow2: Forbid discard in qcow2 v2 images with backing files

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

qcow2: Forbid discard in qcow2 v2 images with backing files

A discard request deallocates the selected clusters so they read back
as zeroes. This is done by clearing the cluster offset field and
set

qcow2: Forbid discard in qcow2 v2 images with backing files

A discard request deallocates the selected clusters so they read back
as zeroes. This is done by clearing the cluster offset field and
setting QCOW_OFLAG_ZERO in the L2 entry.

This flag is however only supported when qcow_version >= 3. In older
images the cluster is simply deallocated, exposing any possible stale
data from the backing file.

Since discard is an advisory operation it's safer to simply forbid it
in this scenario.

Note that we are adding this check to qcow2_co_pdiscard() and not to
qcow2_cluster_discard() or discard_in_l2_slice() because the last
two are also used by qcow2_snapshot_create() to discard the clusters
used by the VM state. In this case there's no risk of exposing stale
data to the guest and we really want that the clusters are always
discarded.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200331114345.29993-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>

show more ...