target/ppc: add user read/write functions for MMCR0

Userspace need access to PMU SPRs to be able to operate the PMU. One of
such SPRs is MMCR0.

MMCR0, as defined by PowerISA v3.1, is classified as

target/ppc: add user read/write functions for MMCR0

Userspace need access to PMU SPRs to be able to operate the PMU. One of
such SPRs is MMCR0.

MMCR0, as defined by PowerISA v3.1, is classified as a 'group A' PMU
register. This class of registers has common read/write rules that are
governed by MMCR0 PMCC bits. MMCR0 is also not fully exposed to problem
state: only MMCR0_FC, MMCR0_PMAO and MMCR0_PMAE bits are
readable/writable in this case.

This patch exposes MMCR0 to userspace by doing the following:

- two new callbacks, spr_read_MMCR0_ureg() and spr_write_MMCR0_ureg(),
are added to be used as problem state read/write callbacks of UMMCR0.
Both callbacks filters the amount of bits userspace is able to
read/write by using a MMCR0_UREG_MASK;

- problem state access control is done by the spr_groupA_read_allowed()
and spr_groupA_write_allowed() helpers. These helpers will read the
current PMCC bits from DisasContext and check whether the read/write
MMCR0 operation is valid or noti;

- to avoid putting exclusive PMU logic into the already loaded
translate.c file, let's create a new 'power8-pmu-regs.c.inc' file that
will hold all the spr_read/spr_write functions of PMU registers.

The 'power8' name of this new file intends to hint about the proven
support of the PMU logic to be added. The code has been tested with the
IBM POWER chip family, POWER8 being the oldest version tested. This
doesn't mean that the PMU logic will break with any other PPC64 chip
that implements Book3s, but rather that we can't assert that it works
properly with any Book3s compliant chip.

CC: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-3-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc: add MMCR0 PMCC bits to hflags

We're going to add PMU support for TCG PPC64 chips, based on IBM POWER8+
emulation and following PowerISA v3.1. This requires several PMU related
registers

target/ppc: add MMCR0 PMCC bits to hflags

We're going to add PMU support for TCG PPC64 chips, based on IBM POWER8+
emulation and following PowerISA v3.1. This requires several PMU related
registers to be exposed to userspace (problem state). PowerISA v3.1
dictates that the PMCC bits of the MMCR0 register controls the level of
access of the PMU registers to problem state.

This patch start things off by exposing both PMCC bits to hflags,
allowing us to access them via DisasContext in the read/write callbacks
that we're going to add next.

Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211018010133.315842-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc: Filter mtmsr[d] input before setting MSR

PowerISA says that mtmsr[d] "does not alter MSR[HV], MSR[S], MSR[ME], or
MSR[LE]", but the current code only filters the GPR-provided value if
L=

target/ppc: Filter mtmsr[d] input before setting MSR

PowerISA says that mtmsr[d] "does not alter MSR[HV], MSR[S], MSR[ME], or
MSR[LE]", but the current code only filters the GPR-provided value if
L=1. This behavior caused some problems in FreeBSD, and a build option
was added to work around the issue [1], but it seems that the bug was
not reported in launchpad/gitlab. This patch address the issue in qemu,
so the option on FreeBSD should no longer be required.

[1] https://cgit.freebsd.org/src/commit/?id=4efb1ca7d2a44cfb33d7f9e18bd92f8d68dcfee0

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211015181940.197982-1-matheus.ferst@eldorado.org.br>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc: Use tcg_constant_i64() in gen_brh()

The mask of the Byte-Reverse Halfword opcode is a read-only
constant. We can avoid using a TCG temporary by moving the
mask to the constant pool.

Sig

target/ppc: Use tcg_constant_i64() in gen_brh()

The mask of the Byte-Reverse Halfword opcode is a read-only
constant. We can avoid using a TCG temporary by moving the
mask to the constant pool.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003141711.3673181-3-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc: Use tcg_constant_i32() in gen_setb()

Avoid using TCG temporaries for the -1 and 8 constant values.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003141711.36

target/ppc: Use tcg_constant_i32() in gen_setb()

Avoid using TCG temporaries for the -1 and 8 constant values.

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211003141711.3673181-2-f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc: Drop exit checks for singlestep_enabled

GDB single-stepping is now handled generically.
Reuse gen_debug_exception to handle architectural debug exceptions.

Signed-off-by: Richard Hender

target/ppc: Drop exit checks for singlestep_enabled

GDB single-stepping is now handled generically.
Reuse gen_debug_exception to handle architectural debug exceptions.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

target/ppc: Use MO_128 for 16 byte atomics

Cc: qemu-ppc@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

target/ppc: Check privilege level based on PSR and LPCR[HR] in tlbie[l]

PowerISA v3.0B made tlbie[l] hypervisor privileged when PSR=0 and HR=1.
To allow the check at translation time, we'll use the

target/ppc: Check privilege level based on PSR and LPCR[HR] in tlbie[l]

PowerISA v3.0B made tlbie[l] hypervisor privileged when PSR=0 and HR=1.
To allow the check at translation time, we'll use the HR bit of LPCR to
check the MMU mode instead of the PATE.HR.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210917114751.206845-3-matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

target/ppc: add LPCR[HR] to DisasContext and hflags

Add a Host Radix field (hr) in DisasContext with LPCR[HR] value to allow
us to decide between Radix and HPT while validating instructions
argument

target/ppc: add LPCR[HR] to DisasContext and hflags

Add a Host Radix field (hr) in DisasContext with LPCR[HR] value to allow
us to decide between Radix and HPT while validating instructions
arguments. Note that PowerISA v3.1 does not require LPCR[HR] and PATE.HR
to match if the thread is in ultravisor/hypervisor real addressing mode,
so ctx->hr may be invalid if ctx->hv and ctx->dr are set.

Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210917114751.206845-2-matheus.ferst@eldorado.org.br>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

accel/tcg: Add DisasContextBase argument to translator_ld*

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson

accel/tcg: Add DisasContextBase argument to translator_ld*

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20210725' into staging

The Hexagon target was silently failing the SIGSEGV test because
the signal handler was not called.

Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20210725' into staging

The Hexagon target was silently failing the SIGSEGV test because
the signal handler was not called.

Patch 1/2 fixes the Hexagon target
Patch 2/2 drops include qemu.h from target/hexagon/op_helper.c

**** Changes in v2 ****
Drop changes to linux-test.c due to intermittent failures on riscv

# gpg: Signature made Sun 25 Jul 2021 22:39:38 BST
# gpg: using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422

* remotes/quic/tags/pull-hex-20210725:
target/hexagon: Drop include of qemu.h
Hexagon (target/hexagon) remove put_user_*/get_user_*

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20210723-pull-request' into staging

vga: fixes for qxl and virtio-gpu

# gpg: Signature made Fri 23 Jul 2021 06:54:34 BST
#

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20210723-pull-request' into staging

vga: fixes for qxl and virtio-gpu

# gpg: Signature made Fri 23 Jul 2021 06:54:34 BST
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20210723-pull-request:
hw/display: fix virgl reset regression
vl: add virtio-vga-gl to the default_list
hw/display: fail early when multiple virgl devices are requested
Revert "qxl: add migration blocker to avoid pre-save assert"
qxl: remove assert in qxl_pre_save.
hw/display/virtio-gpu: Fix memory leak (CID 1453811)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

Bugfixes.

# gpg: Signature made Thu 22 Jul 2021 14:11:27 BST
# gpg: using RSA

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

Bugfixes.

# gpg: Signature made Thu 22 Jul 2021 14:11:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream:
configure: Let --without-default-features disable vhost-kernel and vhost-vdpa
configure: Fix the default setting of the "xen" feature
configure: Allow vnc to get disabled with --without-default-features
configure: Fix --without-default-features propagation to meson
meson: fix dependencies for modinfo
configure: Drop obsolete check for the alloc_size attribute
target/i386: Added consistency checks for EFER
target/i386: Added consistency checks for CR4
target/i386: Added V_INTR_PRIO check to virtual interrupts
qemu-config: restore "machine" in qmp_query_command_line_options()
usb: fix usb-host dependency check
chardev-spice: add missing module_obj directive
vl: Parse legacy default_machine_opts
qemu-config: fix memory leak on ferror()
qemu-config: never call the callback after an error, fix leak

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210721' into staging

Atomic build fixes for clang-12
Breakpoint reorg

# gpg: Signature made Wed 21 Jul 2021 20:5

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210721' into staging

Atomic build fixes for clang-12
Breakpoint reorg

# gpg: Signature made Wed 21 Jul 2021 20:57:50 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210721: (27 commits)
accel/tcg: Record singlestep_enabled in tb->cflags
accel/tcg: Hoist tb_cflags to a local in translator_loop
accel/tcg: Remove TranslatorOps.breakpoint_check
accel/tcg: Move breakpoint recognition outside translation
accel/tcg: Merge tb_find into its only caller
target/avr: Implement gdb_adjust_breakpoint
hw/core: Introduce CPUClass.gdb_adjust_breakpoint
target/i386: Implement debug_check_breakpoint
target/arm: Implement debug_check_breakpoint
hw/core: Introduce TCGCPUOps.debug_check_breakpoint
accel/tcg: Use CF_NO_GOTO_{TB, PTR} in cpu_exec_step_atomic
accel/tcg: Handle -singlestep in curr_cflags
accel/tcg: Drop CF_NO_GOTO_PTR from -d nochain
accel/tcg: Add CF_NO_GOTO_TB and CF_NO_GOTO_PTR
target/alpha: Drop goto_tb path in gen_call_pal
accel/tcg: Move curr_cflags into cpu-exec.c
accel/tcg: Reduce CF_COUNT_MASK to match TCG_MAX_INSNS
accel/tcg: Push trace info building into atomic_common.c.inc
trace: Fold mem-internal.h into mem.h
accel/tcg: Expand ATOMIC_MMU_LOOKUP_*
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

accel/tcg: Remove TranslatorOps.breakpoint_check

The hook is now unused, with breakpoints checked outside translation.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

accel/tcg: Remove TranslatorOps.breakpoint_check

The hook is now unused, with breakpoints checked outside translation.

Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20210712' into staging

SD/MMC patches queue

- sdcard: Check for valid address range in SEND_WRITE_PROT (CMD30)

# gpg

Merge remote-tracking branch 'remotes/philmd/tags/sdmmc-20210712' into staging

SD/MMC patches queue

- sdcard: Check for valid address range in SEND_WRITE_PROT (CMD30)

# gpg: Signature made Mon 12 Jul 2021 11:28:13 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/sdmmc-20210712:
hw/sd/sdcard: Check for valid address range in SEND_WRITE_PROT (CMD30)
hw/sd/sdcard: Extract address_in_range() helper, log invalid accesses
hw/sd/sdcard: When card is in wrong state, log which state it is

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' into staging

s390x updates:
- add gen16 cpumodels
- refactor/cleanup some code
- bugfixes

# gpg:

Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210708' into staging

s390x updates:
- add gen16 cpumodels
- refactor/cleanup some code
- bugfixes

# gpg: Signature made Thu 08 Jul 2021 12:26:21 BST
# gpg: using EDDSA key 69A3B536F5CBFC65208026C1DE88BB5641DE66C1
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
# Subkey fingerprint: 69A3 B536 F5CB FC65 2080 26C1 DE88 BB56 41DE 66C1

* remotes/cohuck-gitlab/tags/s390x-20210708:
target/s390x: split sysemu part of cpu models
target/s390x: move kvm files into kvm/
target/s390x: remove kvm-stub.c
target/s390x: use kvm_enabled() to wrap call to kvm_s390_get_hpage_1m
target/s390x: make helper.c sysemu-only
target/s390x: split cpu-dump from helper.c
target/s390x: move sysemu-only code out to cpu-sysemu.c
target/s390x: start moving TCG-only code to tcg/
target/s390x: rename internal.h to s390x-internal.h
target/s390x: remove tcg-stub.c
hw/s390x: only build tod-tcg from the CONFIG_TCG build
hw/s390x: tod: make explicit checks for accelerators when initializing
hw/s390x: rename tod-qemu.c to tod-tcg.c
target/s390x: meson: add target_user_arch
s390x/tcg: Fix m5 vs. m4 field for VECTOR MULTIPLY SUM LOGICAL
target/s390x: Fix CC set by CONVERT TO FIXED/LOGICAL
s390x/cpumodel: add 3931 and 3932

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd/tags/mips-20210711' into staging

MIPS patches queue

- Rename Raven ASIC PCI bridge, add PCI_IO_BASE_ADDR definition
- Various Toshib

Merge remote-tracking branch 'remotes/philmd/tags/mips-20210711' into staging

MIPS patches queue

- Rename Raven ASIC PCI bridge, add PCI_IO_BASE_ADDR definition
- Various Toshiba TX79 opcodes implemented
- Rewrite UHI errno_mips() using switch statement
- Few fixes and improvements in the SONIC model (dp8393x)

# gpg: Signature made Sun 11 Jul 2021 22:12:49 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd/tags/mips-20210711:
dp8393x: don't force 32-bit register access
dp8393x: Rewrite dp8393x_get() / dp8393x_put()
dp8393x: Store CAM registers as 16-bit
dp8393x: Replace 0x40 magic value by SONIC_REG_COUNT definition
dp8393x: Replace address_space_rw(is_write=1) by address_space_write()
dp8393x: fix CAM descriptor entry index
target/mips: Rewrite UHI errno_mips() using switch statement
target/mips/tx79: Introduce SQ opcode (Store Quadword)
target/mips/tx79: Introduce LQ opcode (Load Quadword)
target/mips/tx79: Introduce PROT3W opcode (Parallel Rotate 3 Words)
target/mips/tx79: Introduce PPACW opcode (Parallel Pack to Word)
target/mips/tx79: Introduce PCGT* (Parallel Compare for Greater Than)
target/mips/tx79: Introduce PCEQ* opcodes (Parallel Compare for Equal)
target/mips/tx79: Introduce PEXTL[BHW] opcodes (Parallel Extend Lower)
target/mips/tx79: Introduce PEXTUW (Parallel Extend Upper from Word)
target/mips/tx79: Introduce PSUB* opcodes (Parallel Subtract)
target/mips/tx79: Introduce PAND/POR/PXOR/PNOR opcodes (parallel logic)
hw/pci-host/raven: Add PCI_IO_BASE_ADDR definition
hw/pci-host: Rename Raven ASIC PCI bridge as raven.c

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging

Add translator_use_goto_tb.
Cleanups in prep of breakpoint fixes.
Misc fixes.

# gpg: Si

Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210710' into staging

Add translator_use_goto_tb.
Cleanups in prep of breakpoint fixes.
Misc fixes.

# gpg: Signature made Sat 10 Jul 2021 16:29:14 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth-gitlab/tags/pull-tcg-20210710: (41 commits)
cpu: Add breakpoint tracepoints
tcg: Remove TCG_TARGET_HAS_goto_ptr
accel/tcg: Log tb->cflags with -d exec
accel/tcg: Split out log_cpu_exec
accel/tcg: Move tb_lookup to cpu-exec.c
accel/tcg: Move helper_lookup_tb_ptr to cpu-exec.c
target/i386: Use cpu_breakpoint_test in breakpoint_handler
tcg: Fix prologue disassembly
target/xtensa: Use translator_use_goto_tb
target/tricore: Use tcg_gen_lookup_and_goto_ptr
target/tricore: Use translator_use_goto_tb
target/sparc: Use translator_use_goto_tb
target/sh4: Use translator_use_goto_tb
target/s390x: Remove use_exit_tb
target/s390x: Use translator_use_goto_tb
target/rx: Use translator_use_goto_tb
target/riscv: Use translator_use_goto_tb
target/ppc: Use translator_use_goto_tb
target/openrisc: Use translator_use_goto_tb
target/nios2: Use translator_use_goto_tb
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More SVM fixes (Lara)
* Module annotation database (Gerd)
* Memory leak fixes (myself)
* Bu

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More SVM fixes (Lara)
* Module annotation database (Gerd)
* Memory leak fixes (myself)
* Build fixes (myself)
* --with-devices-* support (Alex)

# gpg: Signature made Fri 09 Jul 2021 17:23:52 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (48 commits)
meson: Use input/output for entitlements target
configure: allow the selection of alternate config in the build
configs: rename default-configs to configs and reorganise
hw/arm: move CONFIG_V7M out of default-devices
hw/arm: add dependency on OR_IRQ for XLNX_VERSAL
meson: Introduce target-specific Kconfig
meson: switch function tests from compilation to linking
vl: fix leak of qdict_crumple return value
target/i386: fix exceptions for MOV to DR
target/i386: Added DR6 and DR7 consistency checks
target/i386: Added MSRPM and IOPM size check
monitor/tcg: move tcg hmp commands to accel/tcg, register them dynamically
usb: build usb-host as module
monitor/usb: register 'info usbhost' dynamically
usb: drop usb_host_dev_is_scsi_storage hook
monitor: allow register hmp commands
accel: build tcg modular
accel: add tcg module annotations
accel: build qtest modular
accel: add qtest module annotations
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210709

# gpg: Signature made Fri 09 Jul 2021 21:2

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.1-pull-request' into staging

Trivial patches pull request 20210709

# gpg: Signature made Fri 09 Jul 2021 21:26:52 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.1-pull-request:
util/guest-random: Fix size arg to tail memcpy
migration: fix typo in mig_throttle_guest_down comment
target/xtensa/xtensa-semi: Fix compilation problem on Haiku
hw/virtio: Document *_should_notify() are called within rcu_read_lock()
misc: Remove redundant new line in perror()
virtiofsd: Add missing newline in error message
misc: Fix "havn't" typo
memory: Display MemoryRegion name in read/write ops trace events
qemu-option: Drop dead assertion

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging

Some qemu updates for IPMI and I2C

Move some ADC file to where they belong and move some sensors to

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging

Some qemu updates for IPMI and I2C

Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.

Add support for I2C PMBus devices.

Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.

Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.

# gpg: Signature made Fri 09 Jul 2021 17:25:04 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81

* remotes/cminyard/tags/for-qemu-6.1-2: (24 commits)
tests/qtest: add tests for MAX34451 device model
hw/misc: add MAX34451 device
tests/qtest: add tests for ADM1272 device model
hw/misc: add ADM1272 device
hw/i2c: add support for PMBus
ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct
hw/i2c: Introduce i2c_start_recv() and i2c_start_send()
hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer()
hw/i2c: Make i2c_start_transfer() direction argument a boolean
hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()
hw/i2c: Remove confusing i2c_send_recv()
hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/misc/auxbus: Replace 'is_write' boolean by its value
hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases
hw/misc/auxbus: Fix MOT/classic I2C mode
hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/i2c/ppc4xx_i2c: Add reference to datasheet
hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/display/sm501: Simplify sm501_i2c_write() logic
hw/input/lm832x: Define TYPE_LM8323 in public header
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210709' into staging

target-arm queue:
* New machine type: stm32vldiscovery
* hw/intc/arm_gicv3_cpuif: Fix vir

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210709' into staging

target-arm queue:
* New machine type: stm32vldiscovery
* hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write
* hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers
* virt: Fix implementation of GPIO-based powerdown/shutdown mechanism
* Correct the encoding of MDCCSR_EL0 and DBGDSCRint
* hw/intc: Improve formatting of MEMTX_ERROR guest error message

# gpg: Signature made Fri 09 Jul 2021 17:09:10 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210709:
hw/intc: Improve formatting of MEMTX_ERROR guest error message
target/arm: Correct the encoding of MDCCSR_EL0 and DBGDSCRint
hw/arm/stellaris: Expand comment about handling of OLED chipselect
hw/gpio/pl061: Document a shortcoming in our implementation
hw/gpio/pl061: Convert to 3-phase reset and assert GPIO lines correctly on reset
hw/arm/virt: Make PL061 GPIO lines pulled low, not high
hw/gpio/pl061: Make pullup/pulldown of outputs configurable
hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers
hw/gpio/pl061: Document the interface of this device
hw/gpio/pl061: Add tracepoints for register read and write
hw/gpio/pl061: Clean up read/write offset handling logic
hw/gpio/pl061: Convert DPRINTF to tracepoints
hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write
tests/boot-serial-test: Add STM32VLDISCOVERY board testcase
docs/system: arm: Add stm32 boards description
stm32vldiscovery: Add the STM32VLDISCOVERY Machine
stm32f100: Add the stm32f100 SoC

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without f

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches

- Make blockdev-reopen stable
- Remove deprecated qemu-img backing file without format
- rbd: Convert to coroutines and add write zeroes support
- rbd: Updated MAINTAINERS
- export/fuse: Allow other users access to the export
- vhost-user: Fix backends without multiqueue support
- Fix drive-backup transaction endless drained section

# gpg: Signature made Fri 09 Jul 2021 13:49:22 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (28 commits)
block: Make blockdev-reopen stable API
iotests: Test reopening multiple devices at the same time
block: Support multiple reopening with x-blockdev-reopen
block: Acquire AioContexts during bdrv_reopen_multiple()
block: Add bdrv_reopen_queue_free()
qcow2: Fix dangling pointer after reopen for 'file'
qemu-img: Improve error for rebase without backing format
qemu-img: Require -F with -b backing image
qcow2: Prohibit backing file changes in 'qemu-img amend'
blockdev: fix drive-backup transaction endless drained section
vhost-user: Fix backends without multiqueue support
MAINTAINERS: add block/rbd.c reviewer
block/rbd: fix type of task->complete
iotests/fuse-allow-other: Test allow-other
iotests/308: Test +w on read-only FUSE exports
export/fuse: Let permissions be adjustable
export/fuse: Give SET_ATTR_SIZE its own branch
export/fuse: Add allow-other option
export/fuse: Pass default_permissions for mount
util/uri: do not check argument of uri_free()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210709' into staging

ppc patch queue 2021-07-09

Here's a (probably) final pull request before the qemu-6.1 soft

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.1-20210709' into staging

ppc patch queue 2021-07-09

Here's a (probably) final pull request before the qemu-6.1 soft
freeze. Includes:
* Implementation of the new H_RPT_INVALIDATE hypercall
* Virtual Open Firmware for pSeries and pegasos2 machine types.
This is an experimental minimal Open Firmware implementation which
works by delegating nearly everything to qemu itself via a special
hypercall.
* A number of cleanups to the ppc soft MMU code
* Fix to handling of two-level radix mode translations for the
powernv machine type
* Update the H_GET_CPU_CHARACTERISTICS call with newly defined bits.
This will allow more flexible handling of possible future CPU
Spectre-like flaws
* Correctly treat mtmsrd as an illegal instruction on BookE cpus
* Firmware update for the ppce500 machine type

# gpg: Signature made Fri 09 Jul 2021 06:16:42 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.1-20210709: (33 commits)
target/ppc: Support for H_RPT_INVALIDATE hcall
linux-headers: Update
spapr: Fix implementation of Open Firmware client interface
target/ppc: Don't compile ppc_tlb_invalid_all without TCG
ppc/pegasos2: Implement some RTAS functions with VOF
ppc/pegasos2: Fix use of && instead of &
ppc/pegasos2: Use Virtual Open Firmware as firmware replacement
target/ppc/spapr: Update H_GET_CPU_CHARACTERISTICS L1D cache flush bits
target/ppc: Allow virtual hypervisor on CPU without HV
ppc/pegasos2: Introduce Pegasos2MachineState structure
target/ppc: mtmsrd is an illegal instruction on BookE
spapr: Implement Open Firmware client interface
docs/system: ppc: Update ppce500 documentation with eTSEC support
roms/u-boot: Bump ppce500 u-boot to v2021.07 to add eTSEC support
target/ppc: change ppc_hash32_xlate to use mmu_idx
target/ppc: introduce mmu-books.h
target/ppc: changed ppc_hash64_xlate to use mmu_idx
target/ppc: fix address translation bug for radix mmus
target/ppc: Fix compilation with DEBUG_BATS debug option
target/ppc: Fix compilation with FLUSH_ALL_TLBS debug option
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...