target/loongarch: Use actual operand size with vbsrl check

Hardcoded 32 bytes is used for vbsrl emulation check, there is
problem when options lsx=on,lasx=off is used for vbsrl.v instruction
in TCG

target/loongarch: Use actual operand size with vbsrl check

Hardcoded 32 bytes is used for vbsrl emulation check, there is
problem when options lsx=on,lasx=off is used for vbsrl.v instruction
in TCG mode. It injects LASX exception rather LSX exception.

Here actual operand size is used.

Cc: qemu-stable@nongnu.org
Fixes: df97f338076 ("target/loongarch: Implement xvreplve xvinsve0 xvpickve")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
(cherry picked from commit d41989e7548397b469ec9c7be4cee699321a317e)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

target/loongarch: Explicitly set 2-NaN propagation rule

Set the 2-NaN propagation rule explicitly in the float_status word we
use.

(There are a couple of places in fpu_helper.c where we create a
du

target/loongarch: Explicitly set 2-NaN propagation rule

Set the 2-NaN propagation rule explicitly in the float_status word we
use.

(There are a couple of places in fpu_helper.c where we create a
dummy float_status word with "float_status *s = { };", but these
are only used for calling float*_is_quiet_nan() so it doesn't
matter that we don't set a 2-NaN propagation rule there.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241025141254.2141506-6-peter.maydell@linaro.org

show more ...

target/loongarch: Add steal time support on migration

With pv steal time supported, VM machine needs get physical address
of each vcpu and notify new host during migration. Here two
functions kvm_ge

target/loongarch: Add steal time support on migration

With pv steal time supported, VM machine needs get physical address
of each vcpu and notify new host during migration. Here two
functions kvm_get_stealtime/kvm_set_stealtime, and guest steal time
physical address is only updated on KVM_PUT_FULL_STATE stage.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240930064040.753929-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

target/loongarch/kvm: Implement LoongArch PMU extension

Implement PMU extension for LoongArch kvm mode. Use OnOffAuto type
variable pmu to check the PMU feature. If the PMU Feature is not supported

target/loongarch/kvm: Implement LoongArch PMU extension

Implement PMU extension for LoongArch kvm mode. Use OnOffAuto type
variable pmu to check the PMU feature. If the PMU Feature is not supported
with KVM host, it reports error if there is pmu=on command line.

If there is no any command line about pmu parameter, it checks whether
KVM host supports the PMU Feature and set the corresponding value in cpucfg.

This patch is based on lbt patch located at
https://lore.kernel.org/qemu-devel/20240904061859.86615-1-maobibo@loongson.cn

Co-developed-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240918082315.2345034-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

target/loongarch: Implement lbt registers save/restore function

Six registers scr0 - scr3, eflags and ftop are added in percpu vmstate.
And two functions kvm_loongarch_get_lbt/kvm_loongarch_put_lbt

target/loongarch: Implement lbt registers save/restore function

Six registers scr0 - scr3, eflags and ftop are added in percpu vmstate.
And two functions kvm_loongarch_get_lbt/kvm_loongarch_put_lbt are added
to save/restore lbt registers.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240929070405.235200-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

target/loongarch: Add loongson binary translation feature

Loongson Binary Translation (LBT) is used to accelerate binary
translation, which contains 4 scratch registers (scr0 to scr3), x86/ARM
eflag

target/loongarch: Add loongson binary translation feature

Loongson Binary Translation (LBT) is used to accelerate binary
translation, which contains 4 scratch registers (scr0 to scr3), x86/ARM
eflags (eflags) and x87 fpu stack pointer (ftop).

Now LBT feature is added in kvm mode, not supported in TCG mode since
it is not emulated. Feature variable lbt is added with OnOffAuto type,
If lbt feature is not supported with KVM host, it reports error if there
is lbt=on command line.

If there is no any command line about lbt parameter, it checks whether
KVM host supports lbt feature and set the corresponding value in cpucfg.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240929070405.235200-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

Merge tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20241016

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKC

Merge tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu into staging

pull-loongarch-20241016

# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
# 3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
# y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
# ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
# =uk+a
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 16 Oct 2024 09:13:05 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF

* tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu:
hw/loongarch/fw_cfg: Build in common_ss[]
hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion
target/loongarch: Avoid bits shift exceeding width of bool type
hw/loongarch/virt: Add FDT table support with acpi ged pm register
acpi: ged: Add macro for acpi sleep control register

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

target/loongarch: Avoid bits shift exceeding width of bool type

Variable env->cf[i] is defined as bool type, it is treated as int type
with shift operation. However the max possible width is 56 for

target/loongarch: Avoid bits shift exceeding width of bool type

Variable env->cf[i] is defined as bool type, it is treated as int type
with shift operation. However the max possible width is 56 for the shift
operation, exceeding the width of int type. And there is existing api
read_fcc() which is converted to u64 type with bitwise shift, it can be
used to dump fp registers into coredump note segment.

Resolves: Coverity CID 1561133
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240914064645.2099169-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

target/loongarch: Use explicit little-endian LD/ST API

The LoongArch architecture uses little endianness. Directly
use the little-endian LD/ST API.

Mechanical change using:

$ end=le; \
for a

target/loongarch: Use explicit little-endian LD/ST API

The LoongArch architecture uses little endianness. Directly
use the little-endian LD/ST API.

Mechanical change using:

$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/loongarch/); \
done

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-13-philmd@linaro.org>

show more ...

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-n

Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging

* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()

# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
# Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
# nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
# pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
# DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
# a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
# =/zo4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Oct 2024 21:04:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
qom: update object_resolve_path*() documentation
qom: set *ambiguous on all paths
qom: rename object_resolve_path_type() "ambiguousp"
target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
kvm: Allow kvm_arch_get/put_registers to accept Error**
accel/kvm: refactor dirty ring setup
minikconf: print error entirely on stderr
9p: remove 'proxy' filesystem backend driver
hw/char: Extract serial-mm
hw/char/serial.h: Extract serial-isa.h
hw: Remove unused inclusion of hw/char/serial.h
target/i386: Expose IBPB-BRTYPE and SBPB CPUID bits to the guest
kvm: refactor core virtual machine creation into its own function
kvm/i386: replace identity_base variable with a constant
kvm/i386: refactor kvm_arch_init and split it into smaller functions
kvm: replace fprintf with error_report()/printf() in kvm_init()
kvm/i386: fix return values of is_host_cpu_intel()
kvm/i386: make kvm_filter_msr() and related definitions private to kvm module
hw/i386/pc: Add a description for the i8042 property
tests/unit: remove block layer code from test-nested-aio-poll
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/arm/Kconfig
# hw/arm/pxa2xx.c

show more ...

kvm: Allow kvm_arch_get/put_registers to accept Error**

This is necessary to provide discernible error messages to the caller.

Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Peter X

kvm: Allow kvm_arch_get/put_registers to accept Error**

This is necessary to provide discernible error messages to the caller.

Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20240927104743.218468-2-jusual@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

target/loongarch: fix -Werror=maybe-uninitialized false-positive

../target/loongarch/gdbstub.c:55:20: error: ‘val’ may be used uninitialized [-Werror=maybe-uninitialized]
55 | return

target/loongarch: fix -Werror=maybe-uninitialized false-positive

../target/loongarch/gdbstub.c:55:20: error: ‘val’ may be used uninitialized [-Werror=maybe-uninitialized]
55 | return gdb_get_reg32(mem_buf, val);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
../target/loongarch/gdbstub.c:39:18: note: ‘val’ was declared here
39 | uint64_t val;

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>

show more ...

mark <zlib.h> with for-crc32 in a consistent manner

in many cases, <zlib.h> is only included for crc32 function,
and in some of them, there's a comment saying that, but in
a different way. In one p

mark <zlib.h> with for-crc32 in a consistent manner

in many cases, <zlib.h> is only included for crc32 function,
and in some of them, there's a comment saying that, but in
a different way. In one place (hw/net/rtl8139.c), there was
another #include added between the comment and <zlib.h> include.

Make all such comments to be on the same line as #include, make
it consistent, and also add a few missing comments, including
hw/nvram/mac_nvram.c which uses adler32 instead.

There's no code changes.

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>

show more ...

target/loongarch: Support QMP dump-guest-memory

Add the support needed for creating prstatus elf notes. This allows
us to use QMP dump-guest-memory.

Now ELF notes of LoongArch only supports general

target/loongarch: Support QMP dump-guest-memory

Add the support needed for creating prstatus elf notes. This allows
us to use QMP dump-guest-memory.

Now ELF notes of LoongArch only supports general elf notes, LSX and
LASX is not supported, since it is mainly used to dump guest memory.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240822065245.2286214-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

target/loongarch/kvm: Add vCPU reset function

KVM provides interface KVM_REG_LOONGARCH_VCPU_RESET to reset vCPU,
it can be used to clear internal state about kvm kernel. vCPU reset
function is added

target/loongarch/kvm: Add vCPU reset function

KVM provides interface KVM_REG_LOONGARCH_VCPU_RESET to reset vCPU,
it can be used to clear internal state about kvm kernel. vCPU reset
function is added here for kvm mode.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240822022827.2273534-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...

target/loongarch: Add compatible support about VM reboot

With edk2-stable202408 LoongArch UEFI bios, CSR PGD register is set only
if its value is equal to zero for boot cpu, it causes reboot issue.

target/loongarch: Add compatible support about VM reboot

With edk2-stable202408 LoongArch UEFI bios, CSR PGD register is set only
if its value is equal to zero for boot cpu, it causes reboot issue. Since
CSR PGD register is changed with linux kernel, UEFI BIOS cannot use it.

Add workaround to clear CSR registers relative with TLB in function
loongarch_cpu_reset_hold(), so that VM can reboot with edk2-stable202408
UEFI bios.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240827035807.3326293-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

show more ...