mtest2make: stop disabling meson test timeouts

The mtest2make.py script passes the arg '-t 0' to 'meson test' which
disables all test timeouts. This is a major source of pain when running
in GitLab

mtest2make: stop disabling meson test timeouts

The mtest2make.py script passes the arg '-t 0' to 'meson test' which
disables all test timeouts. This is a major source of pain when running
in GitLab CI and a test gets stuck. It will stall until GitLab kills the
CI job. This leaves us with little easily consumable information about
the stalled test. The TAP format doesn't show the test name until it is
completed, and TAP output from multiple tests it interleaved. So we
have to analyse the log to figure out what tests had un-finished TAP
output present and thus infer which test case caused the hang. This is
very time consuming and error prone.

By allowing meson to kill stalled tests, we get a direct display of what
test program got stuck, which lets us more directly focus in on what
specific test case within the test program hung.

The other issue with disabling meson test timeouts by default is that it
makes it more likely that maintainers inadvertantly introduce slowdowns.
For example the recent-ish change that accidentally made migrate-test
take 15-20 minutes instead of around 1 minute.

The main risk of this change is that the individual test timeouts might
be too short to allow completion in high load scenarios. Thus, there is
likely to be some short term pain where we have to bump the timeouts for
certain tests to make them reliable enough. The preceeding few patches
raised the timeouts for all failures that were immediately apparent
in GitLab CI.

Even with the possible short term instability, this should still be a
net win for debuggability of failed CI pipelines over the long term.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230717182859.707658-13-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-17-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

show more ...

mtest2make.py: teach suite name that are just "PROJECT"

A subproject test may be simply in the "PROJECT" suite (such as
"qemu-common" with the following patches)

Signed-off-by: Marc-André Lureau <m

mtest2make.py: teach suite name that are just "PROJECT"

A subproject test may be simply in the "PROJECT" suite (such as
"qemu-common" with the following patches)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230302131848.1527460-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

build: add a more generic way to specify make->ninja dependencies

Let any make target specify ninja goals that needs to be built for it
(though selecting the goals is _not_ recursive on depending ta

build: add a more generic way to specify make->ninja dependencies

Let any make target specify ninja goals that needs to be built for it
(though selecting the goals is _not_ recursive on depending targets)
instead of having a custom mechanism only for "make check" and "make
bench".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220517092616.1272238-4-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220527153603.887929-15-alex.bennee@linaro.org>

show more ...

tests: Do not treat the iotests as separate meson test target anymore

If there is a failing iotest, the output is currently not logged to
the console anymore. To get this working again, we need to r

tests: Do not treat the iotests as separate meson test target anymore

If there is a failing iotest, the output is currently not logged to
the console anymore. To get this working again, we need to run the
meson test runner with "--print-errorlogs" (and without "--verbose"
due to a current meson bug that will be fixed here:
https://github.com/mesonbuild/meson/commit/c3f145ca2b9f5.patch ).
We could update the "meson test" call in tests/Makefile.include,
but actually it's nicer and easier if we simply do not treat the
iotests as separate test target anymore and integrate them along
with the other test suites. This has the disadvantage of not getting
the detailed progress indication there anymore, but since that was
only working right in single-threaded "make -j1" mode anyway, it's
not a huge loss right now.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220310075048.2303495-1-thuth@redhat.com>
Tested-by: Hanna Reitz <hreitz@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>

show more ...

build: make check-block a meson test

"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's

build: make check-block a meson test

"meson test" can be asked to run tests verbosely; this makes it usable
also for qemu-iotests's own harness, and it lets "make check-block"
reuse mtest2make.py's infrastructure to find and build test dependencies.

Adjust check-block.sh to use the standard exit code that reports a test
as skipped. Alternatively, in the future we could make it produce TAP
output, which is consistent with all other "make check" tests.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

scripts/mtest2make: add support for SPEED=thorough

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

build: use "meson test" as the test harness

"meson test" starting with version 0.57 is just as capable and easy to
use as QEMU's own TAP driver. All existing options for "make check"
work. The onl

build: use "meson test" as the test harness

"meson test" starting with version 0.57 is just as capable and easy to
use as QEMU's own TAP driver. All existing options for "make check"
work. The only required code change involves how to mark "slow" tests;
they need to belong to an additional "slow" suite.

The rules for .tap output are replaced by JUnit XML; GitLab is able
to parse that output and present it in the CI pipeline report.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

meson: switch minimum meson version to 0.58.2, minimum recommended to 0.59.2

Meson 0.58.2 does not need b_staticpic=$pie anymore, and has
stabilized the keyval module. Remove the workaround and use

meson: switch minimum meson version to 0.58.2, minimum recommended to 0.59.2

Meson 0.58.2 does not need b_staticpic=$pie anymore, and has
stabilized the keyval module. Remove the workaround and use a few
replacements for features deprecated in the 0.57.0 release cycle.

One feature that we would like to use is passing dependencies to
summary. However, that was broken in 0.59.0 and 0.59.1. Therefore,
use the embedded Meson if the host has anything older than 0.59.2,
but allow --meson= to use 0.58.2.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging

ppc patch queue for 2021-03-10

Next batch of patches for the ppc target and machine types. I

Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' into staging

ppc patch queue for 2021-03-10

Next batch of patches for the ppc target and machine types. Includes:
* Several cleanups for sm501 from Peter Maydell
* An update to the SLOF guest firmware
* Improved handling of hotplug failures in spapr, associated cleanups
to the hotplug handling code
* Several etsec fixes and cleanups from Bin Meng
* Assorted other fixes and cleanups

# gpg: Signature made Wed 10 Mar 2021 04:08:53 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dg-gitlab/tags/ppc-for-6.0-20210310:
spapr.c: send QAPI event when memory hotunplug fails
spapr.c: remove duplicated assert in spapr_memory_unplug_request()
target/ppc: fix icount support on Book-e vms accessing SPRs
qemu_timer.c: add timer_deadline_ms() helper
spapr_pci.c: add 'unplug already in progress' message for PCI unplug
spapr.c: add 'unplug already in progress' message for PHB unplug
hw/ppc: e500: Add missing <ranges> in the eTSEC node
hw/net: fsl_etsec: Fix build error when HEX_DUMP is on
spapr_drc.c: use DRC reconfiguration to cleanup DIMM unplug state
spapr_drc.c: add hotunplug timeout for CPUs
spapr_drc.c: introduce unplug_timeout_timer
target/ppc: Fix bcdsub. emulation when result overflows
docs/system: Extend PPC section
spapr: rename spapr_drc_detach() to spapr_drc_unplug_request()
spapr_drc.c: use spapr_drc_release() in isolate_physical/set_unusable
pseries: Update SLOF firmware image
spapr_drc.c: do not call spapr_drc_detach() in drc_isolate_logical()
hw/display/sm501: Inline template header into C file
hw/display/sm501: Expand out macros in template header
hw/display/sm501: Remove dead code for non-32-bit RGB surfaces

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging

Pull request

# gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT
# gpg:

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging

Pull request

# gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits)
sysemu: Let VMChangeStateHandler take boolean 'running' argument
sysemu/runstate: Let runstate_is_running() return bool
hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES
hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES
hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards
qemu-common.h: Update copyright string to 2021
tests/fp/fp-test: Replace the word 'blacklist'
qemu-options: Replace the word 'blacklist'
seccomp: Replace the word 'blacklist'
scripts/tracetool: Replace the word 'whitelist'
ui: Replace the word 'whitelist'
virtio-gpu: Adjust code space style
exec/memory: Use struct Object typedef
fuzz-test: remove unneccessary debugging flags
net: Use id_generate() in the network subsystem, too
MAINTAINERS: Fix the location of tools manuals
vhost_user_gpu: Drop dead check for g_malloc() failure
backends/dbus-vmstate: Fix short read error handling
target/hexagon/gen_tcg_funcs: Fix a typo
hw/elf_ops: Fix a typo
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging

Testing, guest-loader and other misc tweaks

- add warning text to quickstar

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging

Testing, guest-loader and other misc tweaks

- add warning text to quickstart example
- add CFI tests to CI
- use --arch-only for docker pre-requisites
- fix .editorconfig for emacs
- add guest-loader for Xen-like hypervisor testing
- move generic-loader docs into manual proper
- move semihosting out of hw/

# gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2:
semihosting: Move hw/semihosting/ -> semihosting/
semihosting: Move include/hw/semihosting/ -> include/semihosting/
tests/avocado: add boot_xen tests
docs: add some documentation for the guest-loader
docs: move generic-loader documentation into the main manual
hw/core: implement a guest-loader to support static hypervisor guests
device_tree: add qemu_fdt_setprop_string_array helper
hw/riscv: migrate fdt field to generic MachineState
hw/board: promote fdt from ARM VirtMachineState to MachineState
.editorconfig: update the automatic mode setting for Emacs
tests/docker: Use --arch-only when building Debian cross image
gitlab-ci.yml: Add jobs to test CFI flags
gitlab-ci.yml: Allow custom # of parallel linkers
tests/docker: add a test-tcg for building then running check-tcg
docs/system: add a gentle prompt for the complexity to come

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into staging

nbd patches for 2021-03-09

- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2021-03-09' into staging

nbd patches for 2021-03-09

- Add Vladimir as NBD co-maintainer
- Fix reporting of holes in NBD_CMD_BLOCK_STATUS
- Improve command-line parsing accuracy of large numbers (anything going
through qemu_strtosz), including the deprecation of hex+suffix
- Improve some error reporting in the block layer

# gpg: Signature made Tue 09 Mar 2021 15:38:10 GMT
# gpg: using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2021-03-09:
block/qcow2: refactor qcow2_update_options_prepare error paths
block/qed: bdrv_qed_do_open: deal with errp
block/qcow2: simplify qcow2_co_invalidate_cache()
block/qcow2: read_cache_sizes: return status value
block/qcow2-bitmap: return status from qcow2_store_persistent_dirty_bitmaps
block/qcow2-bitmap: improve qcow2_load_dirty_bitmaps() interface
block/qcow2: qcow2_get_specific_info(): drop error propagation
blockjob: return status from block_job_set_speed()
block/mirror: drop extra error propagation in commit_active_start()
block: drop extra error propagation for bdrv_set_backing_hd
blockdev: fix drive_backup_prepare() missed error
block: check return value of bdrv_open_child and drop error propagation
utils: Deprecate hex-with-suffix sizes
utils: Improve qemu_strtosz() to have 64 bits of precision
utils: Enhance testsuite for do_strtosz()
nbd: server: Report holes for raw images
MAINTAINERS: add Vladimir as co-maintainer of NBD

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210309' into staging

Aspeed patches :

* New model for the Aspeed LPC controller
* Misc cleanups

# gpg:

Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210309' into staging

Aspeed patches :

* New model for the Aspeed LPC controller
* Misc cleanups

# gpg: Signature made Tue 09 Mar 2021 11:54:25 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1

* remotes/legoater/tags/pull-aspeed-20210309:
hw/misc: Model KCS devices in the Aspeed LPC controller
hw/misc: Add a basic Aspeed LPC controller model
hw/arm: ast2600: Correct the iBT interrupt ID
hw/arm: ast2600: Set AST2600_MAX_IRQ to value from datasheet
hw/arm: ast2600: Force a multiple of 32 of IRQs for the GIC
hw/arm/aspeed: Fix location of firmware images in documentation
arm/ast2600: Fix SMP booting with -kernel

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into staging

hw/block/nvme updates

* NVMe subsystem support (`-device nvme-subsys`) (Minwoo Im)
* Namespa

Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into staging

hw/block/nvme updates

* NVMe subsystem support (`-device nvme-subsys`) (Minwoo Im)
* Namespace (De|At)tachment support (Minwoo Im)
* Simple Copy command support (Klaus Jensen)
* Flush broadcast support (Gollu Appalanaidu)
* QEMUIOVector/QEMUSGList duality refactoring (Klaus Jensen)

plus various fixes from Minwoo, Gollu, Dmitry and me.

v2:
- add `nqn` nvme-subsys device parameter instead of using `id`.
(Paolo)

# gpg: Signature made Tue 09 Mar 2021 11:44:17 GMT
# gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9
# gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown]
# gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838
# Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9

* remotes/nvme/tags/nvme-next-pull-request: (38 commits)
hw/block/nvme: support Identify NS Attached Controller List
hw/block/nvme: support changed namespace asynchronous event
hw/block/nvme: support namespace attachment command
hw/block/nvme: refactor nvme_select_ns_iocs
hw/block/nvme: support allocated namespace type
hw/block/nvme: fix allocated namespace list to 256
hw/block/nvme: fix namespaces array to 1-based
hw/block/nvme: support namespace detach
hw/block/nvme: refactor nvme_dma
hw/block/nvme: remove the req dependency in map functions
hw/block/nvme: try to deal with the iov/qsg duality
hw/block/nvme: fix strerror printing
hw/block/nvme: remove block accounting for write zeroes
hw/block/nvme: remove redundant len member in compare context
hw/block/nvme: report non-mdts command size limit for dsm
hw/block/nvme: add trace event for zone read check
hw/block/nvme: fix potential compilation error
hw/block/nvme: add identify trace event
hw/block/nvme: remove unnecessary endian conversion
hw/block/nvme: align zoned.zasl with mdts
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-09' into staging

* Add some missing gitlab-CI job dependencies
* Re-enable "make check SPEED=slow"
* Impr

Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-03-09' into staging

* Add some missing gitlab-CI job dependencies
* Re-enable "make check SPEED=slow"
* Improve the gitlab-pipeline-status script
* Clean up inclusing of qtest.h headers
* Improve libqos/qgraph documentation
* Fix downloading problem in the acceptance tests
* Remove deprecated target tilegx
* Add new bsd-user maintainers

# gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/thuth-gitlab/tags/pull-request-2021-03-09:
bsd-user: Add new maintainers
Remove deprecated target tilegx
Acceptance Tests: restore filtering of tests by target arch
Acceptance Tests: restore downloading of VM images
docs/devel/qgraph: improve qgraph documentation
libqos/qgraph: format qgraph comments for sphinx documentation
scripts/ci/gitlab-pipeline-status: give more info when pipeline not found
scripts/ci/gitlab-pipeline-status: give more information on failures
scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET
meson: Re-enable the possibility to run "make check SPEED=slow"
docker: OpenSBI build job depends on OpenSBI container
docker: EDK2 build job depends on EDK2 container
docker: Alpine build job depends on Alpine container
qtest: delete superfluous inclusions of qtest.h

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

meson: Re-enable the possibility to run "make check SPEED=slow"

"make check SPEED=slow" got lost in the conversion of the build
system to meson - the tests were always running in "quick"

meson: Re-enable the possibility to run "make check SPEED=slow"

"make check SPEED=slow" got lost in the conversion of the build
system to meson - the tests were always running in "quick" mode.
Fix it by passing the "-m" parameter to the test harness at the
right spot in scripts/mtest2make.py.

Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210218172313.2217440-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' into staging

Pull request m68k-20210212

Move bootinfo headers to include/standard-headers/asm-m68k
A

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' into staging

Pull request m68k-20210212

Move bootinfo headers to include/standard-headers/asm-m68k
Add M68K_FEATURE_MSP, M68K_FEATURE_MOVEC, M68K_FEATURE_M68010
Add 68060 CR BUSCR and PCR (unimplemented)
CPU types and features cleanup

# gpg: Signature made Fri 12 Feb 2021 21:14:28 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-6.0-pull-request:
m68k: import bootinfo headers from linux
m68k: add MSP detection support for stack pointer swap helpers
m68k: MOVEC insn. should generate exception if wrong CR is accessed
m68k: add missing BUSCR/PCR CR defines, and BUSCR/PCR/CAAR CR to m68k_move_to/from
m68k: improve comments on m68k_move_to/from helpers
m68k: cascade m68k_features by m680xx_cpu_initfn() to improve readability
m68k: improve cpu instantiation comments

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fuzzing improvements (Qiuhao, Alexander)
* i386: Fix BMI decoding for instructions with the 0x66 pr

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fuzzing improvements (Qiuhao, Alexander)
* i386: Fix BMI decoding for instructions with the 0x66 prefix (David)
* initial attempt at fixing event_notifier emulation (Maxim)
* i386: PKS emulation, fix for "qemu-system-i386 -cpu host" (myself)
* meson: RBD test fixes (myself)
* meson: TCI warnings (Philippe)
* Leaner build for --disable-guest-agent, --disable-system and
--disable-tools (Philippe, Stefan)
* --enable-tcg-interpreter fix (Richard)
* i386: SVM feature bits (Wei)
* KVM bugfix (Thomas H.)
* Add missing MemoryRegionOps callbacks (PJP)

# gpg: Signature made Mon 08 Feb 2021 14:15:35 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (46 commits)
target/i386: Expose VMX entry/exit load pkrs control bits
target/i386: Add support for save/load IA32_PKRS MSR
imx7-ccm: add digprog mmio write method
tz-ppc: add dummy read/write methods
spapr_pci: add spapr msi read method
nvram: add nrf51_soc flash read method
prep: add ppc-parity write method
vfio: add quirk device write method
pci-host: designware: add pcie-msi read method
hw/pci-host: add pci-intack write method
cpu-throttle: Remove timer_mod() from cpu_throttle_set()
replay: rng-builtin support
pc-bios/descriptors: fix paths in json files
replay: fix replay of the interrupts
accel/kvm/kvm-all: Fix wrong return code handling in dirty log code
qapi/meson: Restrict UI module to system emulation and tools
qapi/meson: Restrict system-mode specific modules
qapi/meson: Remove QMP from user-mode emulation
qapi/meson: Restrict qdev code to system-mode emulation
meson: Restrict emulation code
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/integration-testing-20210208' into staging

Integration testing patches

Tests added:
- Armbian 20.08 on Orange Pi PC (Phi

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/integration-testing-20210208' into staging

Integration testing patches

Tests added:
- Armbian 20.08 on Orange Pi PC (Philippe)
- MPC8544ds machine (Thomas)
- Virtex-ml507 ppc machine (Thomas)
- Re-enable the microblaze test (Thomas)

Various fixes and documentation improvements from Cleber.

# gpg: Signature made Mon 08 Feb 2021 20:19:12 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/integration-testing-20210208:
Acceptance Tests: remove unnecessary tag from documentation example
Acceptance tests: clarify ssh connection failure reason
tests/acceptance/virtiofs_submounts: required space between IP and port
tests/acceptance/virtiofs_submounts: standardize port as integer
tests/acceptance/virtiofs_submounts: use a virtio-net device instead
tests/acceptance/virtiofs_submounts: do not ask for ssh key password
tests/acceptance/virtiofs_submounts: use workdir property
tests/acceptance/boot_linux: rename misleading cloudinit method
tests/acceptance/boot_linux: fix typo on cloudinit error message
tests/acceptance: Re-enable the microblaze test
tests/acceptance: Add a test for the virtex-ml507 ppc machine
tests/acceptance: Test the mpc8544ds machine
tests/acceptance: Move the pseries test to a separate file
tests/acceptance: Test U-Boot/Linux from Armbian 20.08 on Orange Pi PC
tests/acceptance: Extract do_test_arm_orangepi_armbian_uboot() method
tests/acceptance: Introduce tesseract_ocr() helper
tests/acceptance: Extract tesseract_available() helper in new namespace

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210208a' into staging

Migration pull 2021-02-08

v2
Dropped vmstate: Fix memory leak in vmstate_handle_allo

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20210208a' into staging

Migration pull 2021-02-08

v2
Dropped vmstate: Fix memory leak in vmstate_handle_alloc
Broke on Power
Added migration: only check page size match if RAM postcopy is enabled

# gpg: Signature made Mon 08 Feb 2021 11:28:14 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20210208a: (27 commits)
migration: only check page size match if RAM postcopy is enabled
migration: introduce snapshot-{save, load, delete} QMP commands
iotests: fix loading of common.config from tests/ subdir
iotests: add support for capturing and matching QMP events
migration: introduce a delete_snapshot wrapper
migration: wire up support for snapshot device selection
migration: control whether snapshots are ovewritten
block: rename and alter bdrv_all_find_snapshot semantics
block: allow specifying name of block device for vmstate storage
block: add ability to specify list of blockdevs during snapshot
migration: stop returning errno from load_snapshot()
migration: Make save_snapshot() return bool, not 0/-1
block: push error reporting into bdrv_all_*_snapshot functions
migration: Display the migration blockers
migration: Add blocker information
migration: Fix a few absurdly defective error messages
migration: Fix cache_init()'s "Failed to allocate" error messages
migration: Clean up signed vs. unsigned XBZRLE cache-size
migration: Fix migrate-set-parameters argument validation
migration: introduce 'userfaultfd-wrlat.py' script
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-02-08' into staging

QAPI patches patches for 2021-02-08

# gpg: Signature made Mon 08 Feb 2021 13:54:26 GMT
# gpg

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2021-02-08' into staging

QAPI patches patches for 2021-02-08

# gpg: Signature made Mon 08 Feb 2021 13:54:26 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2021-02-08:
qapi: enable strict-optional checks
qapi: type 'info' as Optional[QAPISourceInfo]
qapi/gen: Drop support for QAPIGen without a file name
qapi/commands: Simplify command registry generation
qapi/gen: Support switching to another module temporarily
qapi/gen: write _genc/_genh access shims
qapi: centralize the built-in module name definition
qapi/gen: Combine ._add_[user|system]_module
qapi: use './builtin' as the built-in module name
qapi: use explicitly internal module names
qapi/gen: Replace ._begin_system_module()
qapi: centralize is_[user|system|builtin]_module methods
qapi/gen: inline _wrap_ifcond into end_if()
qapi/main: handle theoretical None-return from re.match()
qapi/events: fix visit_event typing
qapi/commands: assert arg_type is not None

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-gdbstub-docs-080221-1' into staging

Testing, gdbstub and doc tweaks:

- increase timeout on replay kernel acceptance

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-gdbstub-docs-080221-1' into staging

Testing, gdbstub and doc tweaks:

- increase timeout on replay kernel acceptance test
- fixes for binfmt_misc docker images
- better gdb version detection
- don't silently skip gdb tests
- fix for gdbstub auxv handling
- cleaner handling of check-tcg on tcg disabled builds
- expand vexpress/versitile docs with examples

# gpg: Signature made Mon 08 Feb 2021 11:12:03 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-gdbstub-docs-080221-1:
docs/system: document an example booting the versatilepb machine
docs/system: document an example vexpress-a15 invocation
tests/Makefile.include: don't use TARGET_DIRS for check-tcg
scripts/mtest2make.py: export all-%s-targets variable and use it
tests/tcg: Replace /bin/true by true (required on macOS)
gdbstub: Fix handle_query_xfer_auxv
tests/tcg: don't silently skip the gdb tests
configure: bump the minimum gdb version for check-tcg to 9.1
configure: make version_ge more tolerant of shady version input
tests/docker: add a docker-exec-copy-test
tests/docker: alias docker-help target for consistency
tests/docker: preserve original name when copying libs
tests/docker: make _copy_with_mkdir accept missing files
tests/docker: Fix typo in help message
tests/docker: Fix _get_so_libs() for docker-binfmt-image
tests/acceptance: Increase the timeout in the replay tests

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

scripts/mtest2make.py: export all-%s-targets variable and use it

There are some places where the conditional makefile support is the
simplest solution. Now we don't expose CONFIG_TCG as

scripts/mtest2make.py: export all-%s-targets variable and use it

There are some places where the conditional makefile support is the
simplest solution. Now we don't expose CONFIG_TCG as a variable create
a new one that can be checked for the check-help output.

As check-tcg is a PHONY target we re-use check-softfloat to gate that
as well.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210202134001.25738-13-alex.bennee@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20201019-pull-request' into staging

usb: fixes for dwc2 + ehci.

# gpg: Signature made Mon 19 Oct 2020 13:33:16 BST
# gpg:

Merge remote-tracking branch 'remotes/kraxel/tags/usb-20201019-pull-request' into staging

usb: fixes for dwc2 + ehci.

# gpg: Signature made Mon 19 Oct 2020 13:33:16 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/usb-20201019-pull-request:
hw/usb/hcd-dwc2: fix divide-by-zero in dwc2_handle_packet()
usb/hcd-ehci: Fix error handling on missing device for iTD
usb: hcd-dwc2: change assert()s to qemu_log_mask(LOG_GUEST_ERROR...)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-macppc-20201019' into staging

qemu-macppc updates

# gpg: Signature made Mon 19 Oct 2020 08:13:16 BST
# gpg:

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-macppc-20201019' into staging

qemu-macppc updates

# gpg: Signature made Mon 19 Oct 2020 08:13:16 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-macppc-20201019:
mac_oldworld: Change PCI address of macio to match real hardware
mac_oldworld: Drop some variables
mac_oldworld: Drop a variable, use get_system_memory() directly
mac_newworld: Allow loading binary ROM image
mac_oldworld: Allow loading binary ROM image
m48t59: remove legacy m48t59_init() function
ppc405_boards: use qdev properties instead of legacy m48t59_init() function
sun4u: use qdev properties instead of legacy m48t59_init() function
sun4m: use qdev properties instead of legacy m48t59_init() function
m48t59-isa: remove legacy m48t59_init_isa() function
uninorth: use qdev gpios for PCI IRQs
grackle: use qdev gpios for PCI IRQs
macio: don't reference serial_hd() directly within the device

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...