run-coverity-scan: add --check-upload-only option

Add an option to check if upload is permitted without actually
attempting a build. This can be useful to add a third outcome
beyond success and fai

run-coverity-scan: add --check-upload-only option

Add an option to check if upload is permitted without actually
attempting a build. This can be useful to add a third outcome
beyond success and failure---namely, a CI job can self-cancel
if the uploading quota has been reached.

There is a small change here in that a failure to do the upload
check changes the exit code from 1 to 99. 99 was chosen because
it is what Autotools and Meson use to represent a problem in the
setup (as opposed to a failure in the test).

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

scripts: adjust url to Coverity tools

The URL to the Coverity tools download has changed; the old one points
to an obsolete version that is not supported anymore. Adjust to point
to the correct and

scripts: adjust url to Coverity tools

The URL to the Coverity tools download has changed; the old one points
to an obsolete version that is not supported anymore. Adjust to point
to the correct and supported tools.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Replacing CONFIG_VNC_PNG with CONFIG_PNG

Libpng is only detected if VNC is enabled currently. This patch adds a
generalised png option in the meson build which is aimed to replace use of
CONFIG_VNC_

Replacing CONFIG_VNC_PNG with CONFIG_PNG

Libpng is only detected if VNC is enabled currently. This patch adds a
generalised png option in the meson build which is aimed to replace use of
CONFIG_VNC_PNG with CONFIG_PNG.

Signed-off-by: Kshitij Suri <kshitij.suri@nutanix.com>

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220408071336.99839-2-kshitij.suri@nutanix.com>

[ kraxel: add meson-buildoptions.sh updates ]
[ kraxel: fix centos8 testcase ]
[ kraxel: update --enable-vnc-png too ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

--enable-vnc-png fixup

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

drop libxml2 checks since libxml is not actually used (for parallels)

For a long time, we assumed that libxml2 is necessary for parallels
block format support (block/parallels*). However, this forma

drop libxml2 checks since libxml is not actually used (for parallels)

For a long time, we assumed that libxml2 is necessary for parallels
block format support (block/parallels*). However, this format actually
does not use libxml [*]. Since this is the only user of libxml2 in
whole QEMU tree, we can drop all libxml2 checks and dependencies too.

It is even more: --enable-parallels configure option was the only
option which was silently ignored when it's (fake) dependency
(libxml2) isn't installed.

Drop all mentions of libxml2.

[*] Actually the basis for libxml use were introduced in commit
ed279a06c53 ("configure: add dependency") but the implementation
was never merged:
https://lore.kernel.org/qemu-devel/70227bbd-a517-70e9-714f-e6e0ec431be9@openvz.org/

Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220119090423.149315-1-mjt@msgid.tls.msk.ru>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: Updated description and adapted to use lcitool]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220121154134.315047-5-f4bug@amsat.org>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220204204335.1689602-9-alex.bennee@linaro.org>

show more ...

block/file-posix: Simplify the XFS_IOC_DIOINFO handling

The handling for the XFS_IOC_DIOINFO ioctl is currently quite excessive:
This is not a "real" feature like the other features that we provide

block/file-posix: Simplify the XFS_IOC_DIOINFO handling

The handling for the XFS_IOC_DIOINFO ioctl is currently quite excessive:
This is not a "real" feature like the other features that we provide with
the "--enable-xxx" and "--disable-xxx" switches for the configure script,
since this does not influence lots of code (it's only about one call to
xfsctl() in file-posix.c), so people don't gain much with the ability to
disable this with "--disable-xfsctl".
It's also unfortunate that the ioctl will be disabled on Linux in case
the user did not install the right xfsprogs-devel package before running
configure. Thus let's simplify this by providing the ioctl definition
on our own, so we can completely get rid of the header dependency and
thus the related code in the configure script.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211215125824.250091-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging

Some qemu updates for IPMI and I2C

Move some ADC file to where they belong and move some sensors to

Merge remote-tracking branch 'remotes/cminyard/tags/for-qemu-6.1-2' into staging

Some qemu updates for IPMI and I2C

Move some ADC file to where they belong and move some sensors to a
sensor directory, since with new BMCs coming in lots of different
sensors should be coming in. Keep from cluttering things up.

Add support for I2C PMBus devices.

Replace the confusing and error-prone i2c_send_recv and i2c_transfer with
specific send and receive functions. Several errors have already been
made with these, avoid any new errors.

Fix the watchdog_expired field in the IPMI watchdog, it's not a bool,
it's a u8. After a vmstate transfer, the new value could be wrong.

# gpg: Signature made Fri 09 Jul 2021 17:25:04 BST
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81

* remotes/cminyard/tags/for-qemu-6.1-2: (24 commits)
tests/qtest: add tests for MAX34451 device model
hw/misc: add MAX34451 device
tests/qtest: add tests for ADM1272 device model
hw/misc: add ADM1272 device
hw/i2c: add support for PMBus
ipmi/sim: fix watchdog_expired data type error in IPMIBmcSim struct
hw/i2c: Introduce i2c_start_recv() and i2c_start_send()
hw/i2c: Extract i2c_do_start_transfer() from i2c_start_transfer()
hw/i2c: Make i2c_start_transfer() direction argument a boolean
hw/i2c: Rename i2c_set_slave_address() -> i2c_slave_set_address()
hw/i2c: Remove confusing i2c_send_recv()
hw/misc/auxbus: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/misc/auxbus: Replace 'is_write' boolean by its value
hw/misc/auxbus: Explode READ_I2C / WRITE_I2C_MOT cases
hw/misc/auxbus: Fix MOT/classic I2C mode
hw/i2c/ppc4xx_i2c: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/i2c/ppc4xx_i2c: Add reference to datasheet
hw/display/sm501: Replace i2c_send_recv() by i2c_recv() & i2c_send()
hw/display/sm501: Simplify sm501_i2c_write() logic
hw/input/lm832x: Define TYPE_LM8323 in public header
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: bugfixes, improvements

vhost-user-rng support.
Fixes all over the place.

Signed

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pc,pci,virtio: bugfixes, improvements

vhost-user-rng support.
Fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Wed 07 Jul 2021 14:29:30 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
MAINTAINERS: Add maintainer for vhost-user RNG implementation
docs: add slot when adding new PCIe root port
acpi/ged: fix reset cause
tests: acpi: pc: update expected DSDT blobs
acpi: pc: revert back to v5.2 PCI slot enumeration
tests: acpi: prepare for changing DSDT tables
migration: failover: reset partially_hotplugged
virtio-pci: Changed return values for "notify", "device" and "isr" read.
virtio-pci: Added check for virtio device in PCI config cbs.
virtio-pci: Added check for virtio device presence in mm callbacks.
hw/pci-host/q35: Ignore write of reserved PCIEXBAR LENGTH field
virtio: Clarify MR transaction optimization
virtio: disable ioeventfd for record/replay

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Thu 08 Jul 2021 14:11:37 BST
# gpg:

Merge remote-tracking branch 'remotes/stefanha-gitlab/tags/block-pull-request' into staging

Pull request

# gpg: Signature made Thu 08 Jul 2021 14:11:37 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8

* remotes/stefanha-gitlab/tags/block-pull-request:
block/io: Merge discard request alignments
block: Add backend_defaults property
block/file-posix: Optimize for macOS
util/async: print leaked BH name when AioContext finalizes
util/async: add a human-readable name to BHs for debugging

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More Meson test conversions and configure cleanups
* Generalize XSAVE area offset so that it matche

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* More Meson test conversions and configure cleanups
* Generalize XSAVE area offset so that it matches AMD processors on KVM
* Improvements for -display and deprecation of -no-quit
* Enable SMP configuration as a compound machine property ("-M smp.cpus=...")
* Haiku compilation fix
* Add icon on Darwin

# gpg: Signature made Tue 06 Jul 2021 08:35:23 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (40 commits)
config-host.mak: remove unused compiler-related lines
Set icon for QEMU binary on Mac OS
qemu-option: remove now-dead code
machine: add smp compound property
vl: switch -M parsing to keyval
keyval: introduce keyval_parse_into
keyval: introduce keyval_merge
qom: export more functions for use with non-UserCreatable objects
configure: convert compiler tests to meson, part 6
configure: convert compiler tests to meson, part 5
configure: convert compiler tests to meson, part 4
configure: convert compiler tests to meson, part 3
configure: convert compiler tests to meson, part 2
configure: convert compiler tests to meson, part 1
configure: convert HAVE_BROKEN_SIZE_MAX to meson
configure, meson: move CONFIG_IVSHMEM to meson
meson: store dependency('threads') in a variable
meson: sort existing compiler tests
configure, meson: convert libxml2 detection to meson
configure, meson: convert liburing detection to meson
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

coverity-scan: switch to vpath build

This is the patch that has been running on the coverity cronjob
for a few weeks now.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-v3-pull-request' into staging

artist out of bounds fixes

# gpg: Signature made Wed 26 Aug 2020 22:09:55 BST
# gpg:

Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-v3-pull-request' into staging

artist out of bounds fixes

# gpg: Signature made Wed 26 Aug 2020 22:09:55 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F

* remotes/hdeller/tags/target-hppa-v3-pull-request:
hw/display/artist: Fix invalidation of lines near screen border
hw/display/artist: Fix invalidation of lines in artist_draw_line()
hw/display/artist: Unbreak size mismatch memory accesses
hw/display/artist: Prevent out of VRAM buffer accesses
Revert "hw/display/artist: Avoid drawing line when nothing to display"
hw/display/artist: Refactor artist_rop8() to avoid buffer over-run
hw/display/artist: Check offset in draw_line to avoid buffer over-run
hw/hppa/lasi: Don't abort on invalid IMR value
hw/display/artist.c: fix out of bounds check
hw/hppa: Implement proper SeaBIOS version check
seabios-hppa: Update to SeaBIOS hppa version 1
hw/hppa: Sync hppa_hardware.h file with SeaBIOS sources

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Get rid of the libqemustub.a remainders

libqemustub.a has been removed in commit ebedb37c8d ("Makefile: Remove
libqemustub.a"). Some remainders have been missed. Remove them now.

Get rid of the libqemustub.a remainders

libqemustub.a has been removed in commit ebedb37c8d ("Makefile: Remove
libqemustub.a"). Some remainders have been missed. Remove them now.

Message-Id: <20200804170055.2851-8-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;

Merge remote-tracking branch 'remotes/xtensa/tags/20200625-xtensa' into staging

target/xtensa fixes for 5.1:

- fix access to special registers missing in the core configuration;
- fix simcall opcode behavior for new hardware;
- drop gen_io_end call from xtensa translator.

# gpg: Signature made Thu 25 Jun 2020 09:08:58 BST
# gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044
# gpg: issuer "jcmvbkbc@gmail.com"
# gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown]
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full]
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full]
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20200625-xtensa:
target/xtensa: drop gen_io_end call
target/xtensa: fix simcall for newer hardware
target/xtensa: fetch HW version from configuration overlay
target/xtensa: work around missing SR definitions

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Miscellaneous fixes and feature enablement (many)
* SEV refactoring (David)
* Hyper-V initial support

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Miscellaneous fixes and feature enablement (many)
* SEV refactoring (David)
* Hyper-V initial support (Jon)
* i386 TCG fixes (x87 and SSE, Joseph)
* vmport cleanup and improvements (Philippe, Liran)
* Use-after-free with vCPU hot-unplug (Nengyuan)
* run-coverity-scan improvements (myself)
* Record/replay fixes (Pavel)
* -machine kernel_irqchip=split improvements for INTx (Peter)
* Code cleanups (Philippe)
* Crash and security fixes (PJP)
* HVF cleanups (Roman)

# gpg: Signature made Fri 12 Jun 2020 16:57:04 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (116 commits)
target/i386: Remove obsolete TODO file
stubs: move Xen stubs to accel/
replay: fix replay shutdown for console mode
exec/cpu-common: Move MUSB specific typedefs to 'hw/usb/hcd-musb.h'
hw/usb: Move device-specific declarations to new 'hcd-musb.h' header
exec/memory: Remove unused MemoryRegionMmio type
checkpatch: reversed logic with acpi test checks
target/i386: sev: Unify SEVState and SevGuestState
target/i386: sev: Remove redundant handle field
target/i386: sev: Remove redundant policy field
target/i386: sev: Remove redundant cbitpos and reduced_phys_bits fields
target/i386: sev: Partial cleanup to sev_state global
target/i386: sev: Embed SEVState in SevGuestState
target/i386: sev: Rename QSevGuestInfo
target/i386: sev: Move local structure definitions into .c file
target/i386: sev: Remove unused QSevGuestInfoClass
xen: fix build without pci passthrough
i386: hvf: Drop HVFX86EmulatorState
i386: hvf: Move mmio_buf into CPUX86State
i386: hvf: Move lazy_flags into CPUX86State
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/i386/acpi-build.c

show more ...

run-coverity-scan: support --update-tools-only --docker

Just build the container when run-coverity-scan is invoked with
--update-tools-only --docker. This requires moving the "docker bu

run-coverity-scan: support --update-tools-only --docker

Just build the container when run-coverity-scan is invoked with
--update-tools-only --docker. This requires moving the "docker build"
logic into the update_coverity_tools function.

The only snag is that --update-tools-only --docker requires access to
the dockerfile. For now just report an error for --src-tarball, and
"docker build" will fail if not in a source tree. Another possibility
could be to host our container images on a public registry, and use
"FROM qemu:fedora" to make the Dockerfile small enough that it can be
included directly in the run-coverity-scan script.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

run-coverity-scan: download tools outside the container

This lets us look at coverity_tool.md5 across executions of run-coverity-scan
and skip the download.

Reviewed-by: Peter M

run-coverity-scan: download tools outside the container

This lets us look at coverity_tool.md5 across executions of run-coverity-scan
and skip the download.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

run-coverity-scan: use --no-update-tools in docker run

Tools are already updated via the docker build.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo

run-coverity-scan: use --no-update-tools in docker run

Tools are already updated via the docker build.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

run-coverity-scan: add --no-update-tools option

Provide a quick way to skip building the container while we figure out how
to get caching right.

Reviewed-by: Peter Maydell <pete

run-coverity-scan: add --no-update-tools option

Provide a quick way to skip building the container while we figure out how
to get caching right.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

run-coverity-scan: use docker.py

Our trusted docker wrapper allows run-coverity-scan to run with both
docker and podman.

For the "run" phase this is transparent; for the "build"

run-coverity-scan: use docker.py

Our trusted docker wrapper allows run-coverity-scan to run with both
docker and podman.

For the "run" phase this is transparent; for the "build" phase however
scripts are replaced with a bind mount (-v). This is not an issue
because the secret option is meant for secrets stored globally in the
system and bind mounts are a valid substitute for secrets that are known
to whoever builds the container.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

run-coverity-scan: get Coverity token and email from special git config section

Support a [coverity] section in .git/config. It can be used to retrieve the
token and also, if it is diff

run-coverity-scan: get Coverity token and email from special git config section

Support a [coverity] section in .git/config. It can be used to retrieve the
token and also, if it is different from user.email, the username of the
submitter.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Bugfixes, and reworking of the atomics documentation.

# gpg: Signature made Tue 14 Apr 2020 15:38:01 BS

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Bugfixes, and reworking of the atomics documentation.

# gpg: Signature made Tue 14 Apr 2020 15:38:01 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream:
hax: Windows doesn't like posix device names
tests: numa: test one backend with prealloc enabled
hostmem: set default prealloc_threads to valid value

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

scripts/coverity-scan: Add Docker support

Add support for running the Coverity Scan tools inside a Docker
container rather than directly on the host system.

Reviewed-by: Philipp

scripts/coverity-scan: Add Docker support

Add support for running the Coverity Scan tools inside a Docker
container rather than directly on the host system.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200319193323.2038-7-peter.maydell@linaro.org

show more ...

scripts/run-coverity-scan: Script to run Coverity Scan build

Add a new script to automate the process of running the Coverity
Scan build tools and uploading the resulting tarball to the

scripts/run-coverity-scan: Script to run Coverity Scan build

Add a new script to automate the process of running the Coverity
Scan build tools and uploading the resulting tarball to the
website.

This is intended eventually to be driven from Travis,
but it can be run locally, if you are a maintainer of the
QEMU project on the Coverity Scan website and have the secret
upload token.

The script must be run on a Fedora 30 system. Support for using a
Docker container is added in a following commit.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200319193323.2038-6-peter.maydell@linaro.org

show more ...