pc-bios/s390-ccw: Don't use __bss_start with the "larl" instruction

start.S currently cannot be compiled with Clang 16 and binutils 2.40:

ld: start.o(.text+0x8): misaligned symbol `__bss_start' (0

pc-bios/s390-ccw: Don't use __bss_start with the "larl" instruction

start.S currently cannot be compiled with Clang 16 and binutils 2.40:

ld: start.o(.text+0x8): misaligned symbol `__bss_start' (0xc1e5) for
relocation R_390_PC32DBL

According to the built-in linker script of ld, the symbol __bss_start
can actually point *before* the .bss section and does not need to have
any alignment, so in certain situations (like when using the internal
assembler of Clang), the __bss_start symbol can indeed be unaligned
and thus it is not suitable for being used with the "larl" instruction
that needs an address that is at least aligned to halfwords.
The problem went unnoticed so far since binutils <= 2.39 did not
check the alignment, but starting with binutils 2.40, such unaligned
addresses are now refused.

Fix it by loading the address indirectly instead.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2216662
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Suggested-by: Andreas Krebbel <andreas.krebbel@de.ibm.com>
Message-Id: <20230629104821.194859-8-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

pc-bios/s390-ccw: Move the stack array into start.S

The stack array is only referenced from the start-up code (which is
shared between the s390-ccw.img and the s390-netboot.img), but it is
currently

pc-bios/s390-ccw: Move the stack array into start.S

The stack array is only referenced from the start-up code (which is
shared between the s390-ccw.img and the s390-netboot.img), but it is
currently declared twice, once in main.c and once in netmain.c.
It makes more sense to declare this in start.S instead - which will
also be helpful in the next patch, since we need to mention the .bss
section in start.S in that patch.

While we're at it, let's also drop the huge alignment of the stack,
since there is no technical requirement for aligning it to page
boundaries.

Message-Id: <20230627074703.99608-4-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

pc-bios/s390-ccw: Provide space for initial stack frame in start.S

Providing the space of a stack frame is the duty of the caller,
so we should reserve 160 bytes before jumping into the main functio

pc-bios/s390-ccw: Provide space for initial stack frame in start.S

Providing the space of a stack frame is the duty of the caller,
so we should reserve 160 bytes before jumping into the main function.
Otherwise the main() function might write past the stack array.

While we're at it, add a proper STACK_SIZE macro for the stack size
instead of using magic numbers (this is also required for the following
patch).

Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230627074703.99608-3-thuth@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

pc-bios/s390-ccw: Fix indentation in start.S

start.S is currently indented with a mixture of spaces and tabs, which
is quite ugly. QEMU coding style says indentation should be 4 spaces,
and this is

pc-bios/s390-ccw: Fix indentation in start.S

start.S is currently indented with a mixture of spaces and tabs, which
is quite ugly. QEMU coding style says indentation should be 4 spaces,
and this is also what we are using in the assembler files in the
tests/tcg/s390x/ folder already, so let's adjust start.S accordingly.

Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20230627074703.99608-2-thuth@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

s390x: Fix spelling errors

Fix typos (discovered with the 'codespell' utility).
Note: Though "migrateable" still seems to be a valid spelling, we change
it to "migratable" since this is the way more

s390x: Fix spelling errors

Fix typos (discovered with the 'codespell' utility).
Note: Though "migrateable" still seems to be a valid spelling, we change
it to "migratable" since this is the way more common spelling here.

Message-Id: <20221111182828.282251-1-thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

machine + QOM queue, 2020-10-06

* QOM documentation fixes and cleanups (Eduardo Habkost)

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

machine + QOM queue, 2020-10-06

* QOM documentation fixes and cleanups (Eduardo Habkost)
* user-mode: Prune build dependencies (Philippe Mathieu-Daudé)
* qom: Improve error message (Philippe Mathieu-Daudé)
* numa: hmat: require parent cache description before the next
level one (Igor Mammedov)

# gpg: Signature made Tue 06 Oct 2020 23:09:03 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request: (21 commits)
numa: hmat: require parent cache description before the next level one
kernel-doc: Remove $decl_type='type name' hack
memory: Explicitly tag doc comments for structs
qom: Explicitly tag doc comments for typedefs and structs
kernel-doc: Handle function typedefs without asterisks
kernel-doc: Handle function typedefs that return pointers
docs/devel/qom: Avoid long lines
docs/devel/qom: Remove usage of <code>
docs/devel/qom: Use *emphasis* for emphasis
docs/devel/qom: Fix indentation of code blocks
docs/devel/qom: Fix indentation of bulleted list
qom: Fix DECLARE_*CHECKER documentation
qom: Improve error message displayed with missing object properties
hw/core/cpu: Add missing 'exec/cpu-common.h' include
hw/core/qdev-properties: Extract system-mode specific properties
hw/core/qdev-properties: Export some integer-related functions
hw/core/qdev-properties: Export qdev_prop_enum
hw/core/qdev-properties: Export enum-related functions
hw/core/qdev-properties: Fix code style
hw/core/qdev-properties: Use qemu_strtoul() in set_pci_host_devaddr()
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-06' into staging

* Don't stop at the first unbootable device, continue scanning
* Fix corner cases in booting

Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-06' into staging

* Don't stop at the first unbootable device, continue scanning
* Fix corner cases in booting from ECKD
* s390x-ccw bios cleanup part 2​

# gpg: Signature made Tue 06 Oct 2020 19:17:46 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5

* remotes/huth-gitlab/tags/pull-request-2020-10-06:
tests/qtest/cdrom: Add more s390x-related boot tests
pc-bios/s390: Update the s390-ccw bios binaries
pc-bios: s390x: Go into disabled wait when encountering a PGM exception
pc-bios: s390x: Use reset PSW if avaliable
pc-bios: s390x: Save PSW rework
pc-bios: s390x: Fix bootmap.c zipl component entry data handling
pc-bios/s390-ccw: break loop if a null block number is reached
pc-bios/s390-ccw: fix off-by-one error
pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()
pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is bad
pc-bios/s390-ccw: Scan through all devices if no boot device specified
pc-bios/s390-ccw: Do not bail out early if not finding a SCSI disk
pc-bios/s390-ccw: Move the inner logic of find_subch() to a separate function
pc-bios/s390-ccw: Introduce ENODEV define and remove guards of others
pc-bios/s390-ccw: Move ipl-related code from main() into a separate function
pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-common

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

pc-bios: s390x: Go into disabled wait when encountering a PGM exception

Let's setup a PGM PSW, so we won't load 0s when a program exception
happens. Instead we'll load a disabled wait PS

pc-bios: s390x: Go into disabled wait when encountering a PGM exception

Let's setup a PGM PSW, so we won't load 0s when a program exception
happens. Instead we'll load a disabled wait PSW.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201006094249.50640-5-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200704' into staging

firmware (and crypto) patches

- add the tls-cipher-suites object,
- add the ability to QOM

Merge remote-tracking branch 'remotes/philmd-gitlab/tags/fw_cfg-20200704' into staging

firmware (and crypto) patches

- add the tls-cipher-suites object,
- add the ability to QOM objects to produce data consumable
by the fw_cfg device,
- let the tls-cipher-suites object implement the
FW_CFG_DATA_GENERATOR interface.

This is required by EDK2 'HTTPS Boot' feature of OVMF to tell
the guest which TLS ciphers it can use.

CI jobs results:
https://travis-ci.org/github/philmd/qemu/builds/704724619
https://gitlab.com/philmd/qemu/-/pipelines/162938106
https://cirrus-ci.com/build/4682977303068672

# gpg: Signature made Sat 04 Jul 2020 17:37:08 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/fw_cfg-20200704:
crypto/tls-cipher-suites: Produce fw_cfg consumable blob
softmmu/vl: Allow -fw_cfg 'gen_id' option to use the 'etc/' namespace
softmmu/vl: Let -fw_cfg option take a 'gen_id' argument
hw/nvram/fw_cfg: Add the FW_CFG_DATA_GENERATOR interface
crypto: Add tls-cipher-suites object

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/vivier/tags/m68k-next-pull-request' into staging

m68k pull-request 20200706

disable floatx80_invalid_encoding() for m68k
fix m68k_cpu_get_p

Merge remote-tracking branch 'remotes/vivier/tags/m68k-next-pull-request' into staging

m68k pull-request 20200706

disable floatx80_invalid_encoding() for m68k
fix m68k_cpu_get_phys_page_debug()

# gpg: Signature made Mon 06 Jul 2020 21:05:33 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-next-pull-request:
softfloat,m68k: disable floatx80_invalid_encoding() for m68k
target/m68k: consolidate physical translation offset into get_physical_address()
target/m68k: fix physical address translation in m68k_cpu_get_phys_page_debug()

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,acpi: features, fixes, cleanups.

vdpa support
virtio-mem support
a handy script for disassem

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio,acpi: features, fixes, cleanups.

vdpa support
virtio-mem support
a handy script for disassembling acpi tables
misc fixes and cleanups

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Tue 07 Jul 2020 13:00:35 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (41 commits)
vhost-vdpa: introduce vhost-vdpa net client
vhost-vdpa: introduce vhost-vdpa backend
vhost_net: introduce set_config & get_config
vhost: implement vhost_force_iommu method
vhost: introduce new VhostOps vhost_force_iommu
vhost: implement vhost_vq_get_addr method
vhost: introduce new VhostOps vhost_vq_get_addr
vhost: implement vhost_dev_start method
vhost: introduce new VhostOps vhost_dev_start
vhost: check the existence of vhost_set_iotlb_callback
virtio-pci: implement queue_enabled method
virtio-bus: introduce queue_enabled method
vhost_net: use the function qemu_get_peer
net: introduce qemu_get_peer
MAINTAINERS: add VT-d entry
docs: vhost-user: add Virtio status protocol feature
tests/acpi: remove stale allowed tables
numa: Auto-enable NUMA when any memory devices are possible
virtio-mem: Exclude unplugged memory during migration
virtio-mem: Add trace events
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
# hw/arm/virt.c
# hw/virtio/trace-events

show more ...

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.1-pull-request' into staging

linux-user pull request 2020-07-02

Update linux-user maintainer
Improve strace o

Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.1-pull-request' into staging

linux-user pull request 2020-07-02

Update linux-user maintainer
Improve strace output for some syscalls
Display contents of ioctl() parameters
Fix sparc64 flushw operation

# gpg: Signature made Sat 04 Jul 2020 17:25:21 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/linux-user-for-5.1-pull-request:
MAINTAINERS: update linux-user maintainer
linux-user: Add strace support for printing arguments of ioctl()
linux-user: Add thunk argument types for SIOCGSTAMP and SIOCGSTAMPNS
linux-user: Add strace support for printing arguments of fallocate()
linux-user: Add strace support for printing arguments of chown()/lchown()
linux-user: Add strace support for printing arguments of lseek()
linux-user: Add strace support for printing argument of syscalls used for extended attributes
linux-user: Add strace support for a group of syscalls
linux-user: Extend strace support to enable argument printing after syscall execution
linux-user: syscall: ioctls: support DRM_IOCTL_VERSION
linux-user/sparc64: Fix the handling of window spill trap
target/sparc: Translate flushw opcode

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200703' into staging

target-arm queue:
* i.MX6UL EVK board: put PHYs in the correct places
* hw/arm/virt: Let

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200703' into staging

target-arm queue:
* i.MX6UL EVK board: put PHYs in the correct places
* hw/arm/virt: Let the virtio-iommu bypass MSIs
* target/arm: kvm: Handle DABT with no valid ISS
* hw/arm/virt-acpi-build: Only expose flash on older machine types
* target/arm: Fix temp double-free in sve ldr/str
* hw/display/bcm2835_fb.c: Initialize all fields of struct
* hw/arm/spitz: Code cleanup to fix Coverity-detected memory leak
* Deprecate TileGX port

# gpg: Signature made Fri 03 Jul 2020 17:53:05 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200703: (34 commits)
Deprecate TileGX port
Replace uses of FROM_SSI_SLAVE() macro with QOM casts
hw/arm/spitz: Provide usual QOM macros for corgi-ssp and spitz-lcdtg
hw/arm/pxa2xx_pic: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Use LOG_GUEST_ERROR for bad guest register accesses
hw/gpio/zaurus.c: Use LOG_GUEST_ERROR for bad guest register accesses
hw/arm/spitz: Encapsulate misc GPIO handling in a device
hw/misc/max111x: Create header file for documentation, TYPE_ macros
hw/misc/max111x: Use GPIO lines rather than max111x_set_input()
hw/arm/spitz: Use max111x properties to set initial values
ssi: Add ssi_realize_and_unref()
hw/misc/max111x: Don't use vmstate_register()
hw/misc/max111x: provide QOM properties for setting initial values
hw/arm/spitz: Implement inbound GPIO lines for bit5 and power signals
hw/arm/spitz: Keep pointers to scp0, scp1 in SpitzMachineState
hw/arm/spitz: Keep pointers to MPU and SSI devices in SpitzMachineState
hw/arm/spitz: Create SpitzMachineClass abstract base class
hw/arm/spitz: Detabify
hw/display/bcm2835_fb.c: Initialize all fields of struct
target/arm: Fix temp double-free in sve ldr/str
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200703a' into staging

virtiofsd+migration pull 2020-07-03

A couple of small migration fixes, and some capability

Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200703a' into staging

virtiofsd+migration pull 2020-07-03

A couple of small migration fixes, and some capability
rework for virtiofsd.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

# gpg: Signature made Fri 03 Jul 2020 16:26:35 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7

* remotes/dgilbert/tags/pull-migration-20200703a:
migration: Count new_dirty instead of real_dirty
migration: postcopy take proper error return
virtiofsd: Allow addition or removal of capabilities
virtiofsd: Check capability calls
virtiofsd: Terminate capability list

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20200703' into staging

s390 update:
- various fixes
- cleanup in the s390x-ccw bios

# gpg: Signature made Fri 03 Jul

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20200703' into staging

s390 update:
- various fixes
- cleanup in the s390x-ccw bios

# gpg: Signature made Fri 03 Jul 2020 11:04:08 BST
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [marginal]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [marginal]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [marginal]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20200703:
s390x/pci: fix set_ind_atomic
virtio-ccw: fix virtio_set_ind_atomic
target/s390x: Fix SQXBR
pc-bios/s390: Update s390-ccw bios binaries with the latest changes
pc-bios/s390-ccw: Generate and include dependency files in the Makefile
pc-bios: s390x: Make u32 ptr check explicit
pc-bios: s390x: Use ebcdic2ascii table
pc-bios: s390x: Move panic() into header and add infinite loop
pc-bios: s390x: Use PSW masks where possible and introduce PSW_MASK_SHORT_ADDR
pc-bios: s390x: Rename PSW_MASK_ZMODE to PSW_MASK_64
pc-bios: s390x: Get rid of magic offsets into the lowcore
pc-bios: s390x: Move sleep and yield to helper.h
pc-bios: s390x: Consolidate timing functions into time.h
pc-bios: s390x: cio.c cleanup and compile fix

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 's390-ccw-bios-2020-07-02' into s390-next-staging

* Source code clean-ups from Janosch

# gpg: Signature made Thu 02 Jul 2020 11:56:01 AM CEST
# gpg: usi

Merge tag 's390-ccw-bios-2020-07-02' into s390-next-staging

* Source code clean-ups from Janosch

# gpg: Signature made Thu 02 Jul 2020 11:56:01 AM CEST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]

* tag 's390-ccw-bios-2020-07-02':
pc-bios/s390: Update s390-ccw bios binaries with the latest changes
pc-bios/s390-ccw: Generate and include dependency files in the Makefile
pc-bios: s390x: Make u32 ptr check explicit
pc-bios: s390x: Use ebcdic2ascii table
pc-bios: s390x: Move panic() into header and add infinite loop
pc-bios: s390x: Use PSW masks where possible and introduce PSW_MASK_SHORT_ADDR
pc-bios: s390x: Rename PSW_MASK_ZMODE to PSW_MASK_64
pc-bios: s390x: Get rid of magic offsets into the lowcore
pc-bios: s390x: Move sleep and yield to helper.h
pc-bios: s390x: Consolidate timing functions into time.h
pc-bios: s390x: cio.c cleanup and compile fix

Signed-off-by: Cornelia Huck <cohuck@redhat.com>

show more ...

pc-bios: s390x: Move panic() into header and add infinite loop

panic() was defined for the ccw and net bios, i.e. twice, so it's
cleaner to rather put it into the header.

Also l

pc-bios: s390x: Move panic() into header and add infinite loop

panic() was defined for the ccw and net bios, i.e. twice, so it's
cleaner to rather put it into the header.

Also let's add an infinite loop into the assembly of disabled_wait() so
the caller doesn't need to take care of it.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200624075226.92728-9-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging

Pull request

# gpg: Signature made Wed 01 May 2019 21:24:16 BST
# gpg: using

Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into staging

Pull request

# gpg: Signature made Wed 01 May 2019 21:24:16 BST
# gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full]
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E

* remotes/jnsnow/tags/bitmaps-pull-request:
docs/interop/bitmaps: rewrite and modernize doc
Makefile: add nit-picky mode to sphinx-build

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190426' into staging

Add tcg_gen_extract2_*.
Deal with overflow of TranslationBlocks.
Respect access_type in io_readx.

Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20190426' into staging

Add tcg_gen_extract2_*.
Deal with overflow of TranslationBlocks.
Respect access_type in io_readx.

# gpg: Signature made Fri 26 Apr 2019 18:17:01 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20190426:
cputlb: Fix io_readx() to respect the access_type
tcg/arm: Restrict constant pool displacement to 12 bits
tcg/ppc: Allow the constant pool to overflow at 32k
tcg: Restart TB generation after out-of-line ldst overflow
tcg: Restart TB generation after constant pool overflow
tcg: Restart TB generation after relocation overflow
tcg: Restart after TB code generation overflow
tcg: Hoist max_insns computation to tb_gen_code
tcg/aarch64: Support INDEX_op_extract2_{i32,i64}
tcg/arm: Support INDEX_op_extract2_i32
tcg/i386: Support INDEX_op_extract2_{i32,i64}
tcg: Use extract2 in tcg_gen_deposit_{i32,i64}
tcg: Use deposit and extract2 in tcg_gen_shifti_i64
tcg: Add INDEX_op_extract2_{i32,i64}
tcg: Implement tcg_gen_extract2_{i32,i64}

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190426' into staging

ppc patch queue 2019-04-26

Here's the first ppc target pull request for qemu-4.1. This has a

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.1-20190426' into staging

ppc patch queue 2019-04-26

Here's the first ppc target pull request for qemu-4.1. This has a
number of things that have accumulated while qemu-4.0 was frozen.

* A number of emulated MMU improvements from Ben Herrenschmidt

* Assorted cleanups fro Greg Kurz

* A large set of mostly mechanical cleanups from me to make target/ppc
much closer to compliant with the modern coding style

* Support for passthrough of NVIDIA GPUs using NVLink2

As well as some other assorted fixes.

# gpg: Signature made Fri 26 Apr 2019 07:02:19 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-4.1-20190426: (36 commits)
target/ppc: improve performance of large BAT invalidations
ppc/hash32: Rework R and C bit updates
ppc/hash64: Rework R and C bit updates
ppc/spapr: Use proper HPTE accessors for H_READ
target/ppc: Don't check UPRT in radix mode when in HV real mode
target/ppc/kvm: Convert DPRINTF to traces
target/ppc/trace-events: Fix trivial typo
spapr: Drop duplicate PCI swizzle code
spapr_pci: Get rid of duplicate code for node name creation
target/ppc: Style fixes for translate/spe-impl.inc.c
target/ppc: Style fixes for translate/vmx-impl.inc.c
target/ppc: Style fixes for translate/vsx-impl.inc.c
target/ppc: Style fixes for translate/fp-impl.inc.c
target/ppc: Style fixes for translate.c
target/ppc: Style fixes for translate_init.inc.c
target/ppc: Style fixes for monitor.c
target/ppc: Style fixes for mmu_helper.c
target/ppc: Style fixes for mmu-hash64.[ch]
target/ppc: Style fixes for mmu-hash32.[ch]
target/ppc: Style fixes for misc_helper.c
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 queue, 2019-04-25

* Hygon Dhyana CPU model (Pu Wen)
* Categorize a few devices in hw/

Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging

x86 queue, 2019-04-25

* Hygon Dhyana CPU model (Pu Wen)
* Categorize a few devices in hw/i386 (Ernest Esene)
* Support host-cache-info on TOPOEXT CPUID leaf (Stanislav Lanci)

# gpg: Signature made Thu 25 Apr 2019 19:12:25 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/x86-next-pull-request:
Pass through cache information for TOPOEXT CPUs
Categorize devices: iommu
Categorize devices: IGD passthrough ISA bridge
i386: Add new Hygon 'Dhyana' CPU model

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue, 2019-04-25

* 4.1 machine-types (Cornelia Huck)
* Support MAP_SYNC on p

Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging

Machine queue, 2019-04-25

* 4.1 machine-types (Cornelia Huck)
* Support MAP_SYNC on pmem memory backends (Zhang Yi)
* -cpu parsing fixes and cleanups (Eduardo Habkost)
* machine initialization cleanups (Wei Yang, Markus Armbruster)

# gpg: Signature made Thu 25 Apr 2019 18:54:57 BST
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/machine-next-pull-request:
util/mmap-alloc: support MAP_SYNC in qemu_ram_mmap()
linux-headers: add linux/mman.h.
scripts/update-linux-headers: add linux/mman.h
util/mmap-alloc: Add a 'is_pmem' parameter to qemu_ram_mmap
cpu: Fix crash with empty -cpu option
cpu: Rename parse_cpu_model() to parse_cpu_option()
vl: Simplify machine_parse()
vl: Clean up after previous commit
vl.c: allocate TYPE_MACHINE list once during bootup
vl.c: make find_default_machine() local
hw: add compat machines for 4.1

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge tag 's390-ccw-bios-2019-04-12' into s390-next-staging

Support for booting from a vfio-ccw passthrough dasd device

# gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST
#

Merge tag 's390-ccw-bios-2019-04-12' into s390-next-staging

Support for booting from a vfio-ccw passthrough dasd device

# gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]

* tag 's390-ccw-bios-2019-04-12':
pc-bios/s390: Update firmware images
s390-bios: Use control unit type to find bootable devices
s390-bios: Support booting from real dasd device
s390-bios: Add channel command codes/structs needed for dasd-ipl
s390-bios: Use control unit type to determine boot method
s390-bios: Refactor virtio to run channel programs via cio
s390-bios: Factor finding boot device out of virtio code path
s390-bios: Extend find_dev() for non-virtio devices
s390-bios: cio error handling
s390-bios: Support for running format-0/1 channel programs
s390-bios: ptr2u32 and u32toptr
s390-bios: Map low core memory
s390-bios: Decouple channel i/o logic from virtio
s390-bios: Clean up cio.h
s390-bios: decouple common boot logic from virtio
s390-bios: decouple cio setup from virtio
s390 vfio-ccw: Add bootindex property and IPLB data

Signed-off-by: Cornelia Huck <cohuck@redhat.com>

show more ...

s390-bios: Support for running format-0/1 channel programs

Introduce a library function for executing format-0 and format-1
channel programs and waiting for their completion before conti

s390-bios: Support for running format-0/1 channel programs

Introduce a library function for executing format-0 and format-1
channel programs and waiting for their completion before continuing
execution.

Add cu_type() to channel io library. This will be used to query control
unit type which is used to determine if we are booting a virtio device or a
real dasd device.

Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <1554388475-18329-9-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/xtensa/tags/20190122-xtensa' into staging

target/xtensa: zero overhead loops rework/helpers split

- change xtensa zero overhead loops implement

Merge remote-tracking branch 'remotes/xtensa/tags/20190122-xtensa' into staging

target/xtensa: zero overhead loops rework/helpers split

- change xtensa zero overhead loops implementation to avoid invalidation
of TBs corresponding to previous loop body when a new loop is
encountered;
- extract helper function groups from op_helper.c and move them into
separate source files: exc_helper.c (exception helpers), win_helper.c
(windowed registers helpers), fpu_helper.c (floating point helpers),
mmu_helper.c (memory management helpers) and dbg_helper.c (native debug
helpers).

# gpg: Signature made Tue 22 Jan 2019 18:44:17 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20190122-xtensa:
target/xtensa: move non-HELPER functions to helper.c
target/xtensa: drop dump_state helper
target/xtensa: extract interrupt and exception helpers
target/xtensa: extract debug helpers
target/xtensa: extract MMU helpers
target/xtensa: extract windowed registers helpers
target/xtensa: extract FPU helpers
target/xtensa: rework zero overhead loops implementation

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...